As traduções são geradas por tradução automática. Em caso de conflito entre o conteúdo da tradução e da versão original em inglês, a versão em inglês prevalecerá.

Usando o protocolo Bolt para fazer openCypher consultas ao Neptune

O Bolt é um protocolo cliente/servidor orientado a declarações inicialmente desenvolvido pela Neo4j e licenciado sob a licença Creative Commons 3.0 Attribution-. ShareAlike É orientado por cliente, o que significa que o cliente sempre inicia as trocas de mensagens.

Para se conectar ao Neptune usando os drivers Bolt do Neo4j, basta substituir URL o número da porta e pelos endpoints do cluster usando o esquema. bolt URI Se você tiver uma única instância do Neptune em execução, use o endpoint read_write. Caso várias instâncias estejam em execução, dois drivers são recomendados, um para o gravador e outro para todas as réplicas de leitura. Caso você tenha apenas dois endpoints padrão, um driver read_write e um read_only são suficientes, mas se também tiver endpoints personalizados, pense em criar uma instância de driver para cada um.

O Neptune permite até mil conexões Bolt simultâneas.

Para exemplos de openCypher consultas em vários idiomas que usam os drivers Bolt, consulte a documentação do Neo4j Drivers & Language Guides.

Usar o Bolt com Java para conectar-se ao Neptune

Você pode baixar um driver para qualquer versão que quiser usar do MVNrepositório Maven ou adicionar essa dependência ao seu projeto:

<dependency>
  <groupId>org.neo4j.driver</groupId>
  <artifactId>neo4j-java-driver</artifactId>
  <version>4.3.3</version>
</dependency>

Depois, para se conectar ao Neptune em Java usando um desses drivers Bolt, crie uma instância de driver para a instância primária/de gravador no cluster usando um código como o seguinte:

import org.neo4j.driver.Driver;
import org.neo4j.driver.GraphDatabase;

final Driver driver =
  GraphDatabase.driver("bolt://(your cluster endpoint URL):(your cluster port)",
    AuthTokens.none(),
    Config.builder().withEncryption()
                    .withTrustStrategy(TrustStrategy.trustSystemCertificates())
                    .build());

Se você tiver uma ou mais réplicas de leitor, também poderá criar uma instância de driver para elas usando um código como este:

final Driver read_only_driver =              // (without connection timeout)
  GraphDatabase.driver("bolt://(your cluster endpoint URL):(your cluster port)",
      Config.builder().withEncryption()
                      .withTrustStrategy(TrustStrategy.trustSystemCertificates())
                      .build());

Ou com um tempo limite:

final Driver read_only_timeout_driver =      // (with connection timeout)
  GraphDatabase.driver("bolt://(your cluster endpoint URL):(your cluster port)",
    Config.builder().withConnectionTimeout(30, TimeUnit.SECONDS)
                    .withEncryption()
                    .withTrustStrategy(TrustStrategy.trustSystemCertificates())
                    .build());

Se você tiver endpoints personalizados, também poderá valer a pena criar uma instância de driver para cada um.

Um exemplo de openCypher consulta em Python usando Bolt

Veja como fazer uma openCypher consulta em Python usando o Bolt:

python -m pip install neo4j

from neo4j import GraphDatabase
uri = "bolt://(your cluster endpoint URL):(your cluster port)"
driver = GraphDatabase.driver(uri, auth=("username", "password"), encrypted=True)

Observe que os parâmetros auth são ignorados.

UMA. NET openCypher exemplo de consulta usando Bolt

Para fazer uma openCypher consulta em. NETusando o Bolt, o primeiro passo é instalar o driver Neo4j usando. NuHet Para fazer chamadas síncronas, use a versão .Simple, desta forma:

Install-Package Neo4j.Driver.Simple-4.3.0

using Neo4j.Driver;

namespace hello
{
  // This example creates a node and reads a node in a Neptune
  // Cluster where IAM Authentication is not enabled.
  public class HelloWorldExample : IDisposable
  {
    private bool _disposed = false;
    private readonly IDriver _driver;
    private static string url = "bolt://(your cluster endpoint URL):(your cluster port)";
    private static string createNodeQuery = "CREATE (a:Greeting) SET a.message = 'HelloWorldExample'";
    private static string readNodeQuery = "MATCH(n:Greeting) RETURN n.message";

    ~HelloWorldExample() => Dispose(false);

    public HelloWorldExample(string uri)
    {
      _driver = GraphDatabase.Driver(uri, AuthTokens.None, o => o.WithEncryptionLevel(EncryptionLevel.Encrypted));
    }

    public void createNode()
    {
      // Open a session
      using (var session = _driver.Session())
      {
         // Run the query in a write transaction
        var greeting = session.WriteTransaction(tx =>
        {
          var result = tx.Run(createNodeQuery);
          // Consume the result
          return result.Consume();
        });

        // The output will look like this:
        //   ResultSummary{Query=`CREATE (a:Greeting) SET a.message = 'HelloWorldExample".....
        Console.WriteLine(greeting);
      }
    }

    public void retrieveNode()
    {
      // Open a session
      using (var session = _driver.Session())
      {
        // Run the query in a read transaction
        var greeting = session.ReadTransaction(tx =>
        {
          var result = tx.Run(readNodeQuery);
          // Consume the result. Read the single node
          // created in a previous step.
          return result.Single()[0].As<string>();
        });
        // The output will look like this:
        //   HelloWorldExample
        Console.WriteLine(greeting);
      }
    }

    public void Dispose()
    {
      Dispose(true);
      GC.SuppressFinalize(this);
    }

    protected virtual void Dispose(bool disposing)
    {
      if (_disposed)
        return;
      if (disposing)
      {
        _driver?.Dispose();
      }
      _disposed = true;
    }

    public static void Main()
    {
      using (var apiCaller = new HelloWorldExample(url))
      {
        apiCaller.createNode();
        apiCaller.retrieveNode();
      }
    }
  }
}

Um exemplo de openCypher consulta Java usando Bolt com autenticação IAM

O código Java abaixo mostra como fazer openCypher consultas em Java usando o Bolt com IAM autenticação. O JavaDoc comentário descreve seu uso. Quando uma instância de driver estiver disponível, você poderá usá-la para fazer várias solicitações autenticadas.

package software.amazon.neptune.bolt;

import com.amazonaws.DefaultRequest;
import com.amazonaws.Request;
import com.amazonaws.auth.AWS4Signer;
import com.amazonaws.auth.AWSCredentialsProvider;
import com.amazonaws.http.HttpMethodName;
import com.google.gson.Gson;
import lombok.Builder;
import lombok.Getter;
import lombok.NonNull;
import org.neo4j.driver.Value;
import org.neo4j.driver.Values;
import org.neo4j.driver.internal.security.InternalAuthToken;
import org.neo4j.driver.internal.value.StringValue;

import java.net.URI;
import java.util.Collections;
import java.util.HashMap;
import java.util.Map;

import static com.amazonaws.auth.internal.SignerConstants.AUTHORIZATION;
import static com.amazonaws.auth.internal.SignerConstants.HOST;
import static com.amazonaws.auth.internal.SignerConstants.X_AMZ_DATE;
import static com.amazonaws.auth.internal.SignerConstants.X_AMZ_SECURITY_TOKEN;

/**
 * Use this class instead of `AuthTokens.basic` when working with an IAM
 * auth-enabled server. It works the same as `AuthTokens.basic` when using
 * static credentials, and avoids making requests with an expired signature
 * when using temporary credentials. Internally, it generates a new signature
 * on every invocation (this may change in a future implementation).
 *
 * Note that authentication happens only the first time for a pooled connection.
 *
 * Typical usage:
 *
 * NeptuneAuthToken authToken = NeptuneAuthToken.builder()
 *     .credentialsProvider(credentialsProvider)
 *     .region("aws region")
 *     .url("cluster endpoint url")
 *     .build();
 *
 * Driver driver = GraphDatabase.driver(
 *     authToken.getUrl(),
 *     authToken,
 *     config
 * );
 */

public class NeptuneAuthToken extends InternalAuthToken {
  private static final String SCHEME = "basic";
  private static final String REALM = "realm";
  private static final String SERVICE_NAME = "neptune-db";
  private static final String HTTP_METHOD_HDR = "HttpMethod";
  private static final String DUMMY_USERNAME = "username";
  @NonNull
  private final String region;
  @NonNull
  @Getter
  private final String url;
  @NonNull
  private final AWSCredentialsProvider credentialsProvider;
  private final Gson gson = new Gson();

  @Builder
  private NeptuneAuthToken(
      @NonNull final String region,
      @NonNull final String url,
      @NonNull final AWSCredentialsProvider credentialsProvider
  ) {
      // The superclass caches the result of toMap(), which we don't want
      super(Collections.emptyMap());
      this.region = region;
      this.url = url;
      this.credentialsProvider = credentialsProvider;
  }

  @Override
  public Map<String, Value> toMap() {
    final Map<String, Value> map = new HashMap<>();
    map.put(SCHEME_KEY, Values.value(SCHEME));
    map.put(PRINCIPAL_KEY, Values.value(DUMMY_USERNAME));
    map.put(CREDENTIALS_KEY, new StringValue(getSignedHeader()));
    map.put(REALM_KEY, Values.value(REALM));

    return map;
  }

  private String getSignedHeader() {
    final Request<Void> request = new DefaultRequest<>(SERVICE_NAME);
    request.setHttpMethod(HttpMethodName.GET);
    request.setEndpoint(URI.create(url));
    // Comment out the following line if you're using an engine version older than 1.2.0.0
    request.setResourcePath("/opencypher");

    final AWS4Signer signer = new AWS4Signer();
    signer.setRegionName(region);
    signer.setServiceName(request.getServiceName());
    signer.sign(request, credentialsProvider.getCredentials());

    return getAuthInfoJson(request);
  }

  private String getAuthInfoJson(final Request<Void> request) {
    final Map<String, Object> obj = new HashMap<>();
    obj.put(AUTHORIZATION, request.getHeaders().get(AUTHORIZATION));
    obj.put(HTTP_METHOD_HDR, request.getHttpMethod());
    obj.put(X_AMZ_DATE, request.getHeaders().get(X_AMZ_DATE));
    obj.put(HOST, request.getHeaders().get(HOST));
    obj.put(X_AMZ_SECURITY_TOKEN, request.getHeaders().get(X_AMZ_SECURITY_TOKEN));

    return gson.toJson(obj);
  }
}

Um exemplo de openCypher consulta em Python usando Bolt com autenticação IAM

A classe Python abaixo permite que você faça openCypher consultas em Python usando o Bolt com autenticação: IAM

import json

from neo4j import Auth
from botocore.awsrequest import AWSRequest
from botocore.credentials import Credentials
from botocore.auth import (
  SigV4Auth,
  _host_from_url,
)

SCHEME = "basic"
REALM = "realm"
SERVICE_NAME = "neptune-db"
DUMMY_USERNAME = "username"
HTTP_METHOD_HDR = "HttpMethod"
HTTP_METHOD = "GET"
AUTHORIZATION = "Authorization"
X_AMZ_DATE = "X-Amz-Date"
X_AMZ_SECURITY_TOKEN = "X-Amz-Security-Token"
HOST = "Host"


class NeptuneAuthToken(Auth):
  def __init__(
    self,
    credentials: Credentials,
    region: str,
    url: str,
    **parameters
  ):
    # Do NOT add "/opencypher" in the line below if you're using an engine version older than 1.2.0.0
    request = AWSRequest(method=HTTP_METHOD, url=url + "/opencypher")
    request.headers.add_header("Host", _host_from_url(request.url))
    sigv4 = SigV4Auth(credentials, SERVICE_NAME, region)
    sigv4.add_auth(request)

    auth_obj = {
      hdr: request.headers[hdr]
      for hdr in [AUTHORIZATION, X_AMZ_DATE, X_AMZ_SECURITY_TOKEN, HOST]
    }
    auth_obj[HTTP_METHOD_HDR] = request.method
    creds: str = json.dumps(auth_obj)
    super().__init__(SCHEME, DUMMY_USERNAME, creds, REALM, **parameters)

Você usa essa classe para criar um driver da seguinte forma:

  authToken = NeptuneAuthToken(creds, REGION, URL)
  driver = GraphDatabase.driver(URL, auth=authToken, encrypted=True)

Um exemplo de Node.js usando IAM autenticação e Bolt

O código Node.js abaixo usa a ES6 sintaxe AWS SDK for JavaScript versão 3 para criar um driver que autentica solicitações:

import neo4j from "neo4j-driver";
import { HttpRequest }  from "@aws-sdk/protocol-http";
import { defaultProvider } from "@aws-sdk/credential-provider-node";
import { SignatureV4 } from "@aws-sdk/signature-v4";
import crypto from "@aws-crypto/sha256-js";
const { Sha256 } = crypto;
import assert from "node:assert";

const region = "us-west-2";
const serviceName = "neptune-db";
const host = "(your cluster endpoint URL)";
const port = 8182;
const protocol = "bolt";
const hostPort = host + ":" + port;
const url = protocol + "://" + hostPort;
const createQuery = "CREATE (n:Greeting {message: 'Hello'}) RETURN ID(n)";
const readQuery = "MATCH(n:Greeting) WHERE ID(n) = $id RETURN n.message";

async function signedHeader() {
  const req = new HttpRequest({
    method: "GET",
    protocol: protocol,
    hostname: host,
    port: port,
    // Comment out the following line if you're using an engine version older than 1.2.0.0
    path: "/opencypher",
    headers: {
      host: hostPort
    }
  });

  const signer = new SignatureV4({
    credentials: defaultProvider(),
    region: region,
    service: serviceName,
    sha256: Sha256
  });

  return signer.sign(req, { unsignableHeaders: new Set(["x-amz-content-sha256"]) })
    .then((signedRequest) => {
      const authInfo = {
        "Authorization": signedRequest.headers["authorization"],
        "HttpMethod": signedRequest.method,
        "X-Amz-Date": signedRequest.headers["x-amz-date"],
        "Host": signedRequest.headers["host"],
        "X-Amz-Security-Token": signedRequest.headers["x-amz-security-token"]
      };
      return JSON.stringify(authInfo);
    });
}

async function createDriver() {
  let authToken = { scheme: "basic", realm: "realm", principal: "username", credentials: await signedHeader() };

  return neo4j.driver(url, authToken, {
      encrypted: "ENCRYPTION_ON",
      trust: "TRUST_SYSTEM_CA_SIGNED_CERTIFICATES",
      maxConnectionPoolSize: 1,
      // logging: neo4j.logging.console("debug")
    }
  );
}

function unmanagedTxn(driver) {
  const session = driver.session();
  const tx = session.beginTransaction();
  tx.run(createQuery)
  .then((res) => {
    const id = res.records[0].get(0);
    return tx.run(readQuery, { id: id });
  })
  .then((res) => {
    // All good, the transaction will be committed
    const msg = res.records[0].get("n.message");
    assert.equal(msg, "Hello");
  })
  .catch(err => {
    // The transaction will be rolled back, now handle the error.
    console.log(err);
  })
  .then(() => session.close());
}

createDriver()
.then((driver) => {
  unmanagedTxn(driver);
  driver.close();
})
.catch((err) => {
  console.log(err);
});

UMA. NET openCypher exemplo de consulta usando Bolt com autenticação IAM

Para habilitar a IAM autenticação em. NET, você precisa assinar uma solicitação ao estabelecer a conexão. O exemplo abaixo mostra como criar um auxiliar NeptuneAuthToken para gerar um token de autenticação:

using Amazon.Runtime;
using Amazon.Util;
using Neo4j.Driver;
using System.Security.Cryptography;
using System.Text;
using System.Text.Json;
using System.Web;

namespace Hello
{
  /*
   * Use this class instead of `AuthTokens.None` when working with an IAM-auth-enabled server.
   *
   * Note that authentication happens only the first time for a pooled connection.
   *
   * Typical usage:
   *
   * var authToken = new NeptuneAuthToken(AccessKey, SecretKey, Region).GetAuthToken(Host);
   * _driver = GraphDatabase.Driver(Url, authToken, o => o.WithEncryptionLevel(EncryptionLevel.Encrypted));
   */

  public class NeptuneAuthToken
  {
    private const string ServiceName = "neptune-db";
    private const string Scheme = "basic";
    private const string Realm = "realm";
    private const string DummyUserName = "username";
    private const string Algorithm = "AWS4-HMAC-SHA256";
    private const string AWSRequest = "aws4_request";

    private readonly string _accessKey;
    private readonly string _secretKey;
    private readonly string _region;

    private readonly string _emptyPayloadHash;

    private readonly SHA256 _sha256;


    public NeptuneAuthToken(string awsKey = null, string secretKey = null, string region = null)
    {
      var awsCredentials = awsKey == null || secretKey == null
        ? FallbackCredentialsFactory.GetCredentials().GetCredentials()
        : null;

      _accessKey = awsKey ?? awsCredentials.AccessKey;
      _secretKey = secretKey ?? awsCredentials.SecretKey;
      _region = region ?? FallbackRegionFactory.GetRegionEndpoint().SystemName; //ex: us-east-1

      _sha256 = SHA256.Create();
      _emptyPayloadHash = Hash(Array.Empty<byte>());
    }

    public IAuthToken GetAuthToken(string url)
    {
      return AuthTokens.Custom(DummyUserName, GetCredentials(url), Realm, Scheme);
    }

    /******************** AWS SIGNING FUNCTIONS *********************/
    private string Hash(byte[] bytesToHash)
    {
      return ToHexString(_sha256.ComputeHash(bytesToHash));
    }

    private static byte[] HmacSHA256(byte[] key, string data)
    {
      return new HMACSHA256(key).ComputeHash(Encoding.UTF8.GetBytes(data));
    }

    private byte[] GetSignatureKey(string dateStamp)
    {
      var kSecret = Encoding.UTF8.GetBytes($"AWS4{_secretKey}");
      var kDate = HmacSHA256(kSecret, dateStamp);
      var kRegion = HmacSHA256(kDate, _region);
      var kService = HmacSHA256(kRegion, ServiceName);
      return HmacSHA256(kService, AWSRequest);
    }

    private static string ToHexString(byte[] array)
    {
      return Convert.ToHexString(array).ToLowerInvariant();
    }

    private string GetCredentials(string url)
    {
      var request = new HttpRequestMessage
      {
        Method = HttpMethod.Get,
        RequestUri = new Uri($"https://{url}/opencypher")
      };

      var signedrequest = Sign(request);

      var headers = new Dictionary<string, object>
      {
        [HeaderKeys.AuthorizationHeader] = signedrequest.Headers.GetValues(HeaderKeys.AuthorizationHeader).FirstOrDefault(),
        ["HttpMethod"] = HttpMethod.Get.ToString(),
        [HeaderKeys.XAmzDateHeader] = signedrequest.Headers.GetValues(HeaderKeys.XAmzDateHeader).FirstOrDefault(),
        // Host should be capitalized, not like in Amazon.Util.HeaderKeys.HostHeader
        ["Host"] = signedrequest.Headers.GetValues(HeaderKeys.HostHeader).FirstOrDefault(),
      };

      return JsonSerializer.Serialize(headers);
    }

    private HttpRequestMessage Sign(HttpRequestMessage request)
    {
      var now = DateTimeOffset.UtcNow;
      var amzdate = now.ToString("yyyyMMddTHHmmssZ");
      var datestamp = now.ToString("yyyyMMdd");

      if (request.Headers.Host == null)
      {
        request.Headers.Host = $"{request.RequestUri.Host}:{request.RequestUri.Port}";
      }

      request.Headers.Add(HeaderKeys.XAmzDateHeader, amzdate);

      var canonicalQueryParams = GetCanonicalQueryParams(request);

      var canonicalRequest = new StringBuilder();
      canonicalRequest.Append(request.Method + "\n");
      canonicalRequest.Append(request.RequestUri.AbsolutePath + "\n");
      canonicalRequest.Append(canonicalQueryParams + "\n");

      var signedHeadersList = new List<string>();
      foreach (var header in request.Headers.OrderBy(a => a.Key.ToLowerInvariant()))
      {
        canonicalRequest.Append(header.Key.ToLowerInvariant());
        canonicalRequest.Append(':');
        canonicalRequest.Append(string.Join(",", header.Value.Select(s => s.Trim())));
        canonicalRequest.Append('\n');
        signedHeadersList.Add(header.Key.ToLowerInvariant());
      }
      canonicalRequest.Append('\n');

      var signedHeaders = string.Join(";", signedHeadersList);
      canonicalRequest.Append(signedHeaders + "\n");
      canonicalRequest.Append(_emptyPayloadHash);

      var credentialScope = $"{datestamp}/{_region}/{ServiceName}/{AWSRequest}";
      var stringToSign = $"{Algorithm}\n{amzdate}\n{credentialScope}\n"
        + Hash(Encoding.UTF8.GetBytes(canonicalRequest.ToString()));

      var signing_key = GetSignatureKey(datestamp);
      var signature = ToHexString(HmacSHA256(signing_key, stringToSign));

      request.Headers.TryAddWithoutValidation(HeaderKeys.AuthorizationHeader,
        $"{Algorithm} Credential={_accessKey}/{credentialScope}, SignedHeaders={signedHeaders}, Signature={signature}");

      return request;
    }

    private static string GetCanonicalQueryParams(HttpRequestMessage request)
    {
      var querystring = HttpUtility.ParseQueryString(request.RequestUri.Query);

      // Query params must be escaped in upper case (i.e. "%2C", not "%2c").
      var queryParams = querystring.AllKeys.OrderBy(a => a)
        .Select(key => $"{key}={Uri.EscapeDataString(querystring[key])}");
      return string.Join("&", queryParams);
    }
  }
}

Veja como fazer uma openCypher consulta em. NETusando Bolt com IAM autenticação. O exemplo abaixo usa o auxiliar NeptuneAuthToken:

using Neo4j.Driver;

namespace Hello
{
  public class HelloWorldExample
  {
    private const string Host = "(your hostname):8182";
    private const string Url = $"bolt://{Host}";
    private const string CreateNodeQuery = "CREATE (a:Greeting) SET a.message = 'HelloWorldExample'";
    private const string ReadNodeQuery = "MATCH(n:Greeting) RETURN n.message";

    private const string AccessKey = "(your access key)";
    private const string SecretKey = "(your secret key)";
    private const string Region = "(your AWS region)"; // e.g. "us-west-2"

    private readonly IDriver _driver;

    public HelloWorldExample()
    {
      var authToken = new NeptuneAuthToken(AccessKey, SecretKey, Region).GetAuthToken(Host);

      // Note that when the connection is reinitialized after max connection lifetime
      // has been reached, the signature token could have already been expired (usually 5 min)
      // You can face exceptions like:
      //   `Unexpected server exception 'Signature expired: XXXX is now earlier than YYYY (ZZZZ - 5 min.)`
      _driver = GraphDatabase.Driver(Url, authToken, o =>
                o.WithMaxConnectionLifetime(TimeSpan.FromMinutes(60)).WithEncryptionLevel(EncryptionLevel.Encrypted));
    }

    public async Task CreateNode()
    {
      // Open a session
      using (var session = _driver.AsyncSession())
      {
        // Run the query in a write transaction
        var greeting = await session.WriteTransactionAsync(async tx =>
        {
          var result = await tx.RunAsync(CreateNodeQuery);
          // Consume the result
          return await result.ConsumeAsync();
        });

        // The output will look like this:
        //   ResultSummary{Query=`CREATE (a:Greeting) SET a.message = 'HelloWorldExample".....
        Console.WriteLine(greeting.Query);
      }
    }

    public async Task RetrieveNode()
    {
      // Open a session
      using (var session = _driver.AsyncSession())
      {
        // Run the query in a read transaction
        var greeting = await session.ReadTransactionAsync(async tx =>
        {
          var result = await tx.RunAsync(ReadNodeQuery);
          var records = await result.ToListAsync();

          // Consume the result. Read the single node
          // created in a previous step.
          return records[0].Values.First().Value;
        });
        // The output will look like this:
        //   HelloWorldExample
        Console.WriteLine(greeting);
      }
    }
  }
}

Esse exemplo pode ser iniciado executando o código abaixo em .NET 6 ou .NET 7 com os seguintes pacotes:

namespace Hello
{
  class Program
  {
    static async Task Main()
    {
      var apiCaller = new HelloWorldExample();

      await apiCaller.CreateNode();
      await apiCaller.RetrieveNode();
    }
  }
}

Um exemplo de openCypher consulta em Golang usando Bolt com autenticação IAM

O pacote Golang abaixo mostra como fazer openCypher consultas na linguagem Go usando o Bolt com autenticação: IAM

package main

import (
  "context"
  "encoding/json"
  "fmt"
  "github.com/aws/aws-sdk-go/aws/credentials"
  "github.com/aws/aws-sdk-go/aws/signer/v4"
  "github.com/neo4j/neo4j-go-driver/v5/neo4j"
  "log"
  "net/http"
  "os"
  "time"
)

const (
  ServiceName   = "neptune-db"
  DummyUsername = "username"
)

// Find node by id using Go driver
func findNode(ctx context.Context, region string, hostAndPort string, nodeId string) (string, error) {
  req, err := http.NewRequest(http.MethodGet, "https://"+hostAndPort+"/opencypher", nil)

  if err != nil {
    return "", fmt.Errorf("error creating request, %v", err)
  }

  // credentials must have been exported as environment variables
  signer := v4.NewSigner(credentials.NewEnvCredentials())
  _, err = signer.Sign(req, nil, ServiceName, region, time.Now())

  if err != nil {
    return "", fmt.Errorf("error signing request: %v", err)
  }

  hdrs := []string{"Authorization", "X-Amz-Date", "X-Amz-Security-Token"}
  hdrMap := make(map[string]string)
  for _, h := range hdrs {
    hdrMap[h] = req.Header.Get(h)
  }

  hdrMap["Host"] = req.Host
  hdrMap["HttpMethod"] = req.Method

  password, err := json.Marshal(hdrMap)
  if err != nil {
    return "", fmt.Errorf("error creating JSON, %v", err)
  }
  authToken := neo4j.BasicAuth(DummyUsername, string(password), "")
  // +s enables encryption with a full certificate check
  // Use +ssc to disable client side TLS verification
  driver, err := neo4j.NewDriverWithContext("bolt+s://"+hostAndPort+"/opencypher", authToken)
  if err != nil {
    return "", fmt.Errorf("error creating driver, %v", err)
  }

  defer driver.Close(ctx)

  if err := driver.VerifyConnectivity(ctx); err != nil {
    log.Fatalf("failed to verify connection, %v", err)
  }

  config := neo4j.SessionConfig{}

  session := driver.NewSession(ctx, config)
  defer session.Close(ctx)

  result, err := session.Run(
    ctx,
    fmt.Sprintf("MATCH (n) WHERE ID(n) = '%s' RETURN n", nodeId),
    map[string]any{},
  )
  if err != nil {
    return "", fmt.Errorf("error running query, %v", err)
  }

  if !result.Next(ctx) {
    return "", fmt.Errorf("node not found")
  }

  n, found := result.Record().Get("n")
  if !found {
    return "", fmt.Errorf("node not found")
  }

  return fmt.Sprintf("+%v\n", n), nil
}

func main() {
  if len(os.Args) < 3 {
    log.Fatal("Usage: go main.go (region) (host and port)")
  }
  region := os.Args[1]
  hostAndPort := os.Args[2]
  ctx := context.Background()

  res, err := findNode(ctx, region, hostAndPort, "72c2e8c1-7d5f-5f30-10ca-9d2bb8c4afbc")
  if err != nil {
    log.Fatal(err)
  }
  fmt.Println(res)
}

Comportamento da conexão do Bolt no Neptune

Veja alguns fatos sobre conexões do Bolt no Neptune: