const (
    // AggregationPeriodOneHour is a AggregationPeriod enum value
    AggregationPeriodOneHour = "OneHour"

    // AggregationPeriodOneDay is a AggregationPeriod enum value
    AggregationPeriodOneDay = "OneDay"

    // AggregationPeriodOneWeek is a AggregationPeriod enum value
    AggregationPeriodOneWeek = "OneWeek"
)

const (
    // BatteryLevelNormal is a BatteryLevel enum value
    BatteryLevelNormal = "normal"

    // BatteryLevelLow is a BatteryLevel enum value
    BatteryLevelLow = "low"

    // BatteryLevelCritical is a BatteryLevel enum value
    BatteryLevelCritical = "critical"
)

const (
    // ConnectionStatusConnected is a ConnectionStatus enum value
    ConnectionStatusConnected = "Connected"

    // ConnectionStatusDisconnected is a ConnectionStatus enum value
    ConnectionStatusDisconnected = "Disconnected"
)

const (
    // DeviceProfileTypeSidewalk is a DeviceProfileType enum value
    DeviceProfileTypeSidewalk = "Sidewalk"

    // DeviceProfileTypeLoRaWan is a DeviceProfileType enum value
    DeviceProfileTypeLoRaWan = "LoRaWAN"
)

const (
    // DeviceStateProvisioned is a DeviceState enum value
    DeviceStateProvisioned = "Provisioned"

    // DeviceStateRegisteredNotSeen is a DeviceState enum value
    DeviceStateRegisteredNotSeen = "RegisteredNotSeen"

    // DeviceStateRegisteredReachable is a DeviceState enum value
    DeviceStateRegisteredReachable = "RegisteredReachable"

    // DeviceStateRegisteredUnreachable is a DeviceState enum value
    DeviceStateRegisteredUnreachable = "RegisteredUnreachable"
)

const (
    // DimensionNameDeviceId is a DimensionName enum value
    DimensionNameDeviceId = "DeviceId"

    // DimensionNameGatewayId is a DimensionName enum value
    DimensionNameGatewayId = "GatewayId"
)

const (
    // DlClassClassB is a DlClass enum value
    DlClassClassB = "ClassB"

    // DlClassClassC is a DlClass enum value
    DlClassClassC = "ClassC"
)

const (
    // DownlinkModeSequential is a DownlinkMode enum value
    DownlinkModeSequential = "SEQUENTIAL"

    // DownlinkModeConcurrent is a DownlinkMode enum value
    DownlinkModeConcurrent = "CONCURRENT"

    // DownlinkModeUsingUplinkGateway is a DownlinkMode enum value
    DownlinkModeUsingUplinkGateway = "USING_UPLINK_GATEWAY"
)

const (
    // EventDiscovered is a Event enum value
    EventDiscovered = "discovered"

    // EventLost is a Event enum value
    EventLost = "lost"

    // EventAck is a Event enum value
    EventAck = "ack"

    // EventNack is a Event enum value
    EventNack = "nack"

    // EventPassthrough is a Event enum value
    EventPassthrough = "passthrough"
)

const (
    // EventNotificationResourceTypeSidewalkAccount is a EventNotificationResourceType enum value
    EventNotificationResourceTypeSidewalkAccount = "SidewalkAccount"

    // EventNotificationResourceTypeWirelessDevice is a EventNotificationResourceType enum value
    EventNotificationResourceTypeWirelessDevice = "WirelessDevice"

    // EventNotificationResourceTypeWirelessGateway is a EventNotificationResourceType enum value
    EventNotificationResourceTypeWirelessGateway = "WirelessGateway"
)

const (
    // EventNotificationTopicStatusEnabled is a EventNotificationTopicStatus enum value
    EventNotificationTopicStatusEnabled = "Enabled"

    // EventNotificationTopicStatusDisabled is a EventNotificationTopicStatus enum value
    EventNotificationTopicStatusDisabled = "Disabled"
)

const (
    // ExpressionTypeRuleName is a ExpressionType enum value
    ExpressionTypeRuleName = "RuleName"

    // ExpressionTypeMqttTopic is a ExpressionType enum value
    ExpressionTypeMqttTopic = "MqttTopic"
)

const (
    // FuotaDeviceStatusInitial is a FuotaDeviceStatus enum value
    FuotaDeviceStatusInitial = "Initial"

    // FuotaDeviceStatusPackageNotSupported is a FuotaDeviceStatus enum value
    FuotaDeviceStatusPackageNotSupported = "Package_Not_Supported"

    // FuotaDeviceStatusFragAlgoUnsupported is a FuotaDeviceStatus enum value
    FuotaDeviceStatusFragAlgoUnsupported = "FragAlgo_unsupported"

    // FuotaDeviceStatusNotEnoughMemory is a FuotaDeviceStatus enum value
    FuotaDeviceStatusNotEnoughMemory = "Not_enough_memory"

    // FuotaDeviceStatusFragIndexUnsupported is a FuotaDeviceStatus enum value
    FuotaDeviceStatusFragIndexUnsupported = "FragIndex_unsupported"

    // FuotaDeviceStatusWrongDescriptor is a FuotaDeviceStatus enum value
    FuotaDeviceStatusWrongDescriptor = "Wrong_descriptor"

    // FuotaDeviceStatusSessionCntReplay is a FuotaDeviceStatus enum value
    FuotaDeviceStatusSessionCntReplay = "SessionCnt_replay"

    // FuotaDeviceStatusMissingFrag is a FuotaDeviceStatus enum value
    FuotaDeviceStatusMissingFrag = "MissingFrag"

    // FuotaDeviceStatusMemoryError is a FuotaDeviceStatus enum value
    FuotaDeviceStatusMemoryError = "MemoryError"

    // FuotaDeviceStatusMicerror is a FuotaDeviceStatus enum value
    FuotaDeviceStatusMicerror = "MICError"

    // FuotaDeviceStatusSuccessful is a FuotaDeviceStatus enum value
    FuotaDeviceStatusSuccessful = "Successful"

    // FuotaDeviceStatusDeviceExistInConflictFuotaTask is a FuotaDeviceStatus enum value
    FuotaDeviceStatusDeviceExistInConflictFuotaTask = "Device_exist_in_conflict_fuota_task"
)

const (
    // FuotaTaskStatusPending is a FuotaTaskStatus enum value
    FuotaTaskStatusPending = "Pending"

    // FuotaTaskStatusFuotaSessionWaiting is a FuotaTaskStatus enum value
    FuotaTaskStatusFuotaSessionWaiting = "FuotaSession_Waiting"

    // FuotaTaskStatusInFuotaSession is a FuotaTaskStatus enum value
    FuotaTaskStatusInFuotaSession = "In_FuotaSession"

    // FuotaTaskStatusFuotaDone is a FuotaTaskStatus enum value
    FuotaTaskStatusFuotaDone = "FuotaDone"

    // FuotaTaskStatusDeleteWaiting is a FuotaTaskStatus enum value
    FuotaTaskStatusDeleteWaiting = "Delete_Waiting"
)

const (
    // IdentifierTypePartnerAccountId is a IdentifierType enum value
    IdentifierTypePartnerAccountId = "PartnerAccountId"

    // IdentifierTypeDevEui is a IdentifierType enum value
    IdentifierTypeDevEui = "DevEui"

    // IdentifierTypeGatewayEui is a IdentifierType enum value
    IdentifierTypeGatewayEui = "GatewayEui"

    // IdentifierTypeWirelessDeviceId is a IdentifierType enum value
    IdentifierTypeWirelessDeviceId = "WirelessDeviceId"

    // IdentifierTypeWirelessGatewayId is a IdentifierType enum value
    IdentifierTypeWirelessGatewayId = "WirelessGatewayId"
)

const (
    // ImportTaskStatusInitializing is a ImportTaskStatus enum value
    ImportTaskStatusInitializing = "INITIALIZING"

    // ImportTaskStatusInitialized is a ImportTaskStatus enum value
    ImportTaskStatusInitialized = "INITIALIZED"

    // ImportTaskStatusPending is a ImportTaskStatus enum value
    ImportTaskStatusPending = "PENDING"

    // ImportTaskStatusComplete is a ImportTaskStatus enum value
    ImportTaskStatusComplete = "COMPLETE"

    // ImportTaskStatusFailed is a ImportTaskStatus enum value
    ImportTaskStatusFailed = "FAILED"

    // ImportTaskStatusDeleting is a ImportTaskStatus enum value
    ImportTaskStatusDeleting = "DELETING"
)

const (
    // LogLevelInfo is a LogLevel enum value
    LogLevelInfo = "INFO"

    // LogLevelError is a LogLevel enum value
    LogLevelError = "ERROR"

    // LogLevelDisabled is a LogLevel enum value
    LogLevelDisabled = "DISABLED"
)

const (
    // MessageTypeCustomCommandIdNotify is a MessageType enum value
    MessageTypeCustomCommandIdNotify = "CUSTOM_COMMAND_ID_NOTIFY"

    // MessageTypeCustomCommandIdGet is a MessageType enum value
    MessageTypeCustomCommandIdGet = "CUSTOM_COMMAND_ID_GET"

    // MessageTypeCustomCommandIdSet is a MessageType enum value
    MessageTypeCustomCommandIdSet = "CUSTOM_COMMAND_ID_SET"

    // MessageTypeCustomCommandIdResp is a MessageType enum value
    MessageTypeCustomCommandIdResp = "CUSTOM_COMMAND_ID_RESP"
)

const (
    // MetricNameDeviceRssi is a MetricName enum value
    MetricNameDeviceRssi = "DeviceRSSI"

    // MetricNameDeviceSnr is a MetricName enum value
    MetricNameDeviceSnr = "DeviceSNR"

    // MetricNameDeviceRoamingRssi is a MetricName enum value
    MetricNameDeviceRoamingRssi = "DeviceRoamingRSSI"

    // MetricNameDeviceRoamingSnr is a MetricName enum value
    MetricNameDeviceRoamingSnr = "DeviceRoamingSNR"

    // MetricNameDeviceUplinkCount is a MetricName enum value
    MetricNameDeviceUplinkCount = "DeviceUplinkCount"

    // MetricNameDeviceDownlinkCount is a MetricName enum value
    MetricNameDeviceDownlinkCount = "DeviceDownlinkCount"

    // MetricNameDeviceUplinkLostCount is a MetricName enum value
    MetricNameDeviceUplinkLostCount = "DeviceUplinkLostCount"

    // MetricNameDeviceUplinkLostRate is a MetricName enum value
    MetricNameDeviceUplinkLostRate = "DeviceUplinkLostRate"

    // MetricNameDeviceJoinRequestCount is a MetricName enum value
    MetricNameDeviceJoinRequestCount = "DeviceJoinRequestCount"

    // MetricNameDeviceJoinAcceptCount is a MetricName enum value
    MetricNameDeviceJoinAcceptCount = "DeviceJoinAcceptCount"

    // MetricNameDeviceRoamingUplinkCount is a MetricName enum value
    MetricNameDeviceRoamingUplinkCount = "DeviceRoamingUplinkCount"

    // MetricNameDeviceRoamingDownlinkCount is a MetricName enum value
    MetricNameDeviceRoamingDownlinkCount = "DeviceRoamingDownlinkCount"

    // MetricNameGatewayUpTime is a MetricName enum value
    MetricNameGatewayUpTime = "GatewayUpTime"

    // MetricNameGatewayDownTime is a MetricName enum value
    MetricNameGatewayDownTime = "GatewayDownTime"

    // MetricNameGatewayRssi is a MetricName enum value
    MetricNameGatewayRssi = "GatewayRSSI"

    // MetricNameGatewaySnr is a MetricName enum value
    MetricNameGatewaySnr = "GatewaySNR"

    // MetricNameGatewayUplinkCount is a MetricName enum value
    MetricNameGatewayUplinkCount = "GatewayUplinkCount"

    // MetricNameGatewayDownlinkCount is a MetricName enum value
    MetricNameGatewayDownlinkCount = "GatewayDownlinkCount"

    // MetricNameGatewayJoinRequestCount is a MetricName enum value
    MetricNameGatewayJoinRequestCount = "GatewayJoinRequestCount"

    // MetricNameGatewayJoinAcceptCount is a MetricName enum value
    MetricNameGatewayJoinAcceptCount = "GatewayJoinAcceptCount"

    // MetricNameAwsAccountUplinkCount is a MetricName enum value
    MetricNameAwsAccountUplinkCount = "AwsAccountUplinkCount"

    // MetricNameAwsAccountDownlinkCount is a MetricName enum value
    MetricNameAwsAccountDownlinkCount = "AwsAccountDownlinkCount"

    // MetricNameAwsAccountUplinkLostCount is a MetricName enum value
    MetricNameAwsAccountUplinkLostCount = "AwsAccountUplinkLostCount"

    // MetricNameAwsAccountUplinkLostRate is a MetricName enum value
    MetricNameAwsAccountUplinkLostRate = "AwsAccountUplinkLostRate"

    // MetricNameAwsAccountJoinRequestCount is a MetricName enum value
    MetricNameAwsAccountJoinRequestCount = "AwsAccountJoinRequestCount"

    // MetricNameAwsAccountJoinAcceptCount is a MetricName enum value
    MetricNameAwsAccountJoinAcceptCount = "AwsAccountJoinAcceptCount"

    // MetricNameAwsAccountRoamingUplinkCount is a MetricName enum value
    MetricNameAwsAccountRoamingUplinkCount = "AwsAccountRoamingUplinkCount"

    // MetricNameAwsAccountRoamingDownlinkCount is a MetricName enum value
    MetricNameAwsAccountRoamingDownlinkCount = "AwsAccountRoamingDownlinkCount"

    // MetricNameAwsAccountDeviceCount is a MetricName enum value
    MetricNameAwsAccountDeviceCount = "AwsAccountDeviceCount"

    // MetricNameAwsAccountGatewayCount is a MetricName enum value
    MetricNameAwsAccountGatewayCount = "AwsAccountGatewayCount"

    // MetricNameAwsAccountActiveDeviceCount is a MetricName enum value
    MetricNameAwsAccountActiveDeviceCount = "AwsAccountActiveDeviceCount"

    // MetricNameAwsAccountActiveGatewayCount is a MetricName enum value
    MetricNameAwsAccountActiveGatewayCount = "AwsAccountActiveGatewayCount"
)

const (
    // MetricQueryStatusSucceeded is a MetricQueryStatus enum value
    MetricQueryStatusSucceeded = "Succeeded"

    // MetricQueryStatusFailed is a MetricQueryStatus enum value
    MetricQueryStatusFailed = "Failed"
)

const (
    // MulticastFrameInfoEnabled is a MulticastFrameInfo enum value
    MulticastFrameInfoEnabled = "ENABLED"

    // MulticastFrameInfoDisabled is a MulticastFrameInfo enum value
    MulticastFrameInfoDisabled = "DISABLED"
)

const (
    // OnboardStatusInitialized is a OnboardStatus enum value
    OnboardStatusInitialized = "INITIALIZED"

    // OnboardStatusPending is a OnboardStatus enum value
    OnboardStatusPending = "PENDING"

    // OnboardStatusOnboarded is a OnboardStatus enum value
    OnboardStatusOnboarded = "ONBOARDED"

    // OnboardStatusFailed is a OnboardStatus enum value
    OnboardStatusFailed = "FAILED"
)

const (
    // PositionConfigurationFecRose is a PositionConfigurationFec enum value
    PositionConfigurationFecRose = "ROSE"

    // PositionConfigurationFecNone is a PositionConfigurationFec enum value
    PositionConfigurationFecNone = "NONE"
)

const (
    // PositionConfigurationStatusEnabled is a PositionConfigurationStatus enum value
    PositionConfigurationStatusEnabled = "Enabled"

    // PositionConfigurationStatusDisabled is a PositionConfigurationStatus enum value
    PositionConfigurationStatusDisabled = "Disabled"
)

const (
    // PositionResourceTypeWirelessDevice is a PositionResourceType enum value
    PositionResourceTypeWirelessDevice = "WirelessDevice"

    // PositionResourceTypeWirelessGateway is a PositionResourceType enum value
    PositionResourceTypeWirelessGateway = "WirelessGateway"
)

const (
    // PositioningConfigStatusEnabled is a PositioningConfigStatus enum value
    PositioningConfigStatusEnabled = "Enabled"

    // PositioningConfigStatusDisabled is a PositioningConfigStatus enum value
    PositioningConfigStatusDisabled = "Disabled"
)

const (
    // SigningAlgEd25519 is a SigningAlg enum value
    SigningAlgEd25519 = "Ed25519"

    // SigningAlgP256r1 is a SigningAlg enum value
    SigningAlgP256r1 = "P256r1"
)

const (
    // SummaryMetricConfigurationStatusEnabled is a SummaryMetricConfigurationStatus enum value
    SummaryMetricConfigurationStatusEnabled = "Enabled"

    // SummaryMetricConfigurationStatusDisabled is a SummaryMetricConfigurationStatus enum value
    SummaryMetricConfigurationStatusDisabled = "Disabled"
)

const (
    // SupportedRfRegionEu868 is a SupportedRfRegion enum value
    SupportedRfRegionEu868 = "EU868"

    // SupportedRfRegionUs915 is a SupportedRfRegion enum value
    SupportedRfRegionUs915 = "US915"

    // SupportedRfRegionAu915 is a SupportedRfRegion enum value
    SupportedRfRegionAu915 = "AU915"

    // SupportedRfRegionAs9231 is a SupportedRfRegion enum value
    SupportedRfRegionAs9231 = "AS923-1"

    // SupportedRfRegionAs9232 is a SupportedRfRegion enum value
    SupportedRfRegionAs9232 = "AS923-2"

    // SupportedRfRegionAs9233 is a SupportedRfRegion enum value
    SupportedRfRegionAs9233 = "AS923-3"

    // SupportedRfRegionAs9234 is a SupportedRfRegion enum value
    SupportedRfRegionAs9234 = "AS923-4"

    // SupportedRfRegionEu433 is a SupportedRfRegion enum value
    SupportedRfRegionEu433 = "EU433"

    // SupportedRfRegionCn470 is a SupportedRfRegion enum value
    SupportedRfRegionCn470 = "CN470"

    // SupportedRfRegionCn779 is a SupportedRfRegion enum value
    SupportedRfRegionCn779 = "CN779"

    // SupportedRfRegionRu864 is a SupportedRfRegion enum value
    SupportedRfRegionRu864 = "RU864"

    // SupportedRfRegionKr920 is a SupportedRfRegion enum value
    SupportedRfRegionKr920 = "KR920"

    // SupportedRfRegionIn865 is a SupportedRfRegion enum value
    SupportedRfRegionIn865 = "IN865"
)

const (
    // WirelessDeviceEventJoin is a WirelessDeviceEvent enum value
    WirelessDeviceEventJoin = "Join"

    // WirelessDeviceEventRejoin is a WirelessDeviceEvent enum value
    WirelessDeviceEventRejoin = "Rejoin"

    // WirelessDeviceEventUplinkData is a WirelessDeviceEvent enum value
    WirelessDeviceEventUplinkData = "Uplink_Data"

    // WirelessDeviceEventDownlinkData is a WirelessDeviceEvent enum value
    WirelessDeviceEventDownlinkData = "Downlink_Data"

    // WirelessDeviceEventRegistration is a WirelessDeviceEvent enum value
    WirelessDeviceEventRegistration = "Registration"
)

const (
    // WirelessDeviceFrameInfoEnabled is a WirelessDeviceFrameInfo enum value
    WirelessDeviceFrameInfoEnabled = "ENABLED"

    // WirelessDeviceFrameInfoDisabled is a WirelessDeviceFrameInfo enum value
    WirelessDeviceFrameInfoDisabled = "DISABLED"
)

const (
    // WirelessDeviceIdTypeWirelessDeviceId is a WirelessDeviceIdType enum value
    WirelessDeviceIdTypeWirelessDeviceId = "WirelessDeviceId"

    // WirelessDeviceIdTypeDevEui is a WirelessDeviceIdType enum value
    WirelessDeviceIdTypeDevEui = "DevEui"

    // WirelessDeviceIdTypeThingName is a WirelessDeviceIdType enum value
    WirelessDeviceIdTypeThingName = "ThingName"

    // WirelessDeviceIdTypeSidewalkManufacturingSn is a WirelessDeviceIdType enum value
    WirelessDeviceIdTypeSidewalkManufacturingSn = "SidewalkManufacturingSn"
)

const (
    // WirelessDeviceSidewalkStatusProvisioned is a WirelessDeviceSidewalkStatus enum value
    WirelessDeviceSidewalkStatusProvisioned = "PROVISIONED"

    // WirelessDeviceSidewalkStatusRegistered is a WirelessDeviceSidewalkStatus enum value
    WirelessDeviceSidewalkStatusRegistered = "REGISTERED"

    // WirelessDeviceSidewalkStatusActivated is a WirelessDeviceSidewalkStatus enum value
    WirelessDeviceSidewalkStatusActivated = "ACTIVATED"

    // WirelessDeviceSidewalkStatusUnknown is a WirelessDeviceSidewalkStatus enum value
    WirelessDeviceSidewalkStatusUnknown = "UNKNOWN"
)

const (
    // WirelessDeviceTypeSidewalk is a WirelessDeviceType enum value
    WirelessDeviceTypeSidewalk = "Sidewalk"

    // WirelessDeviceTypeLoRaWan is a WirelessDeviceType enum value
    WirelessDeviceTypeLoRaWan = "LoRaWAN"
)

const (
    // WirelessGatewayEventCupsRequest is a WirelessGatewayEvent enum value
    WirelessGatewayEventCupsRequest = "CUPS_Request"

    // WirelessGatewayEventCertificate is a WirelessGatewayEvent enum value
    WirelessGatewayEventCertificate = "Certificate"
)

const (
    // WirelessGatewayIdTypeGatewayEui is a WirelessGatewayIdType enum value
    WirelessGatewayIdTypeGatewayEui = "GatewayEui"

    // WirelessGatewayIdTypeWirelessGatewayId is a WirelessGatewayIdType enum value
    WirelessGatewayIdTypeWirelessGatewayId = "WirelessGatewayId"

    // WirelessGatewayIdTypeThingName is a WirelessGatewayIdType enum value
    WirelessGatewayIdTypeThingName = "ThingName"
)

const (
    // WirelessGatewayServiceTypeCups is a WirelessGatewayServiceType enum value
    WirelessGatewayServiceTypeCups = "CUPS"

    // WirelessGatewayServiceTypeLns is a WirelessGatewayServiceType enum value
    WirelessGatewayServiceTypeLns = "LNS"
)

const (
    // WirelessGatewayTaskStatusPending is a WirelessGatewayTaskStatus enum value
    WirelessGatewayTaskStatusPending = "PENDING"

    // WirelessGatewayTaskStatusInProgress is a WirelessGatewayTaskStatus enum value
    WirelessGatewayTaskStatusInProgress = "IN_PROGRESS"

    // WirelessGatewayTaskStatusFirstRetry is a WirelessGatewayTaskStatus enum value
    WirelessGatewayTaskStatusFirstRetry = "FIRST_RETRY"

    // WirelessGatewayTaskStatusSecondRetry is a WirelessGatewayTaskStatus enum value
    WirelessGatewayTaskStatusSecondRetry = "SECOND_RETRY"

    // WirelessGatewayTaskStatusCompleted is a WirelessGatewayTaskStatus enum value
    WirelessGatewayTaskStatusCompleted = "COMPLETED"

    // WirelessGatewayTaskStatusFailed is a WirelessGatewayTaskStatus enum value
    WirelessGatewayTaskStatusFailed = "FAILED"
)

const (

    // ErrCodeAccessDeniedException for service response error code
    // "AccessDeniedException".
    //
    // User does not have permission to perform this action.
    ErrCodeAccessDeniedException = "AccessDeniedException"

    // ErrCodeConflictException for service response error code
    // "ConflictException".
    //
    // Adding, updating, or deleting the resource can cause an inconsistent state.
    ErrCodeConflictException = "ConflictException"

    // ErrCodeInternalServerException for service response error code
    // "InternalServerException".
    //
    // An unexpected error occurred while processing a request.
    ErrCodeInternalServerException = "InternalServerException"

    // ErrCodeResourceNotFoundException for service response error code
    // "ResourceNotFoundException".
    //
    // Resource does not exist.
    ErrCodeResourceNotFoundException = "ResourceNotFoundException"

    // ErrCodeThrottlingException for service response error code
    // "ThrottlingException".
    //
    // The request was denied because it exceeded the allowed API request rate.
    ErrCodeThrottlingException = "ThrottlingException"

    // ErrCodeTooManyTagsException for service response error code
    // "TooManyTagsException".
    //
    // The request was denied because the resource can't have any more tags.
    ErrCodeTooManyTagsException = "TooManyTagsException"

    // ErrCodeValidationException for service response error code
    // "ValidationException".
    //
    // The input did not meet the specified constraints.
    ErrCodeValidationException = "ValidationException"
)

const (
    ServiceName = "IoT Wireless"    // Name of service.
    EndpointsID = "api.iotwireless" // ID to lookup a service endpoint with.
    ServiceID   = "IoT Wireless"    // ServiceID is a unique identifier of a specific service.
)

const (
    // ApplicationConfigTypeSemtechGeolocation is a ApplicationConfigType enum value
    ApplicationConfigTypeSemtechGeolocation = "SemtechGeolocation"
)

const (
    // EventNotificationPartnerTypeSidewalk is a EventNotificationPartnerType enum value
    EventNotificationPartnerTypeSidewalk = "Sidewalk"
)

const (
    // PartnerTypeSidewalk is a PartnerType enum value
    PartnerTypeSidewalk = "Sidewalk"
)

const (
    // PositionSolverProviderSemtech is a PositionSolverProvider enum value
    PositionSolverProviderSemtech = "Semtech"
)

const (
    // PositionSolverTypeGnss is a PositionSolverType enum value
    PositionSolverTypeGnss = "GNSS"
)

const (
    // WirelessGatewayTaskDefinitionTypeUpdate is a WirelessGatewayTaskDefinitionType enum value
    WirelessGatewayTaskDefinitionTypeUpdate = "UPDATE"
)

const (
    // WirelessGatewayTypeLoRaWan is a WirelessGatewayType enum value
    WirelessGatewayTypeLoRaWan = "LoRaWAN"
)

func AggregationPeriod_Values ¶

func AggregationPeriod_Values() []string

AggregationPeriod_Values returns all elements of the AggregationPeriod enum

func ApplicationConfigType_Values ¶

func ApplicationConfigType_Values() []string

ApplicationConfigType_Values returns all elements of the ApplicationConfigType enum

func BatteryLevel_Values ¶

func BatteryLevel_Values() []string

BatteryLevel_Values returns all elements of the BatteryLevel enum

func ConnectionStatus_Values ¶

func ConnectionStatus_Values() []string

ConnectionStatus_Values returns all elements of the ConnectionStatus enum

func DeviceProfileType_Values ¶

func DeviceProfileType_Values() []string

DeviceProfileType_Values returns all elements of the DeviceProfileType enum

func DeviceState_Values ¶

func DeviceState_Values() []string

DeviceState_Values returns all elements of the DeviceState enum

func DimensionName_Values ¶

func DimensionName_Values() []string

DimensionName_Values returns all elements of the DimensionName enum

func DlClass_Values ¶

func DlClass_Values() []string

DlClass_Values returns all elements of the DlClass enum

func DownlinkMode_Values ¶

func DownlinkMode_Values() []string

DownlinkMode_Values returns all elements of the DownlinkMode enum

func EventNotificationPartnerType_Values ¶

func EventNotificationPartnerType_Values() []string

EventNotificationPartnerType_Values returns all elements of the EventNotificationPartnerType enum

func EventNotificationResourceType_Values ¶

func EventNotificationResourceType_Values() []string

EventNotificationResourceType_Values returns all elements of the EventNotificationResourceType enum

func EventNotificationTopicStatus_Values ¶

func EventNotificationTopicStatus_Values() []string

EventNotificationTopicStatus_Values returns all elements of the EventNotificationTopicStatus enum

func Event_Values ¶

func Event_Values() []string

Event_Values returns all elements of the Event enum

func ExpressionType_Values ¶

func ExpressionType_Values() []string

ExpressionType_Values returns all elements of the ExpressionType enum

func FuotaDeviceStatus_Values ¶

func FuotaDeviceStatus_Values() []string

FuotaDeviceStatus_Values returns all elements of the FuotaDeviceStatus enum

func FuotaTaskStatus_Values ¶

func FuotaTaskStatus_Values() []string

FuotaTaskStatus_Values returns all elements of the FuotaTaskStatus enum

func IdentifierType_Values ¶

func IdentifierType_Values() []string

IdentifierType_Values returns all elements of the IdentifierType enum

func ImportTaskStatus_Values ¶

func ImportTaskStatus_Values() []string

ImportTaskStatus_Values returns all elements of the ImportTaskStatus enum

func LogLevel_Values ¶

func LogLevel_Values() []string

LogLevel_Values returns all elements of the LogLevel enum

func MessageType_Values ¶

func MessageType_Values() []string

MessageType_Values returns all elements of the MessageType enum

func MetricName_Values ¶

func MetricName_Values() []string

MetricName_Values returns all elements of the MetricName enum

func MetricQueryStatus_Values ¶

func MetricQueryStatus_Values() []string

MetricQueryStatus_Values returns all elements of the MetricQueryStatus enum

func MulticastFrameInfo_Values ¶

func MulticastFrameInfo_Values() []string

MulticastFrameInfo_Values returns all elements of the MulticastFrameInfo enum

func OnboardStatus_Values ¶

func OnboardStatus_Values() []string

OnboardStatus_Values returns all elements of the OnboardStatus enum

func PartnerType_Values ¶

func PartnerType_Values() []string

PartnerType_Values returns all elements of the PartnerType enum

func PositionConfigurationFec_Values ¶

func PositionConfigurationFec_Values() []string

PositionConfigurationFec_Values returns all elements of the PositionConfigurationFec enum

func PositionConfigurationStatus_Values ¶

func PositionConfigurationStatus_Values() []string

PositionConfigurationStatus_Values returns all elements of the PositionConfigurationStatus enum

func PositionResourceType_Values ¶

func PositionResourceType_Values() []string

PositionResourceType_Values returns all elements of the PositionResourceType enum

func PositionSolverProvider_Values ¶

func PositionSolverProvider_Values() []string

PositionSolverProvider_Values returns all elements of the PositionSolverProvider enum

func PositionSolverType_Values ¶

func PositionSolverType_Values() []string

PositionSolverType_Values returns all elements of the PositionSolverType enum

func PositioningConfigStatus_Values ¶

func PositioningConfigStatus_Values() []string

PositioningConfigStatus_Values returns all elements of the PositioningConfigStatus enum

func SigningAlg_Values ¶

func SigningAlg_Values() []string

SigningAlg_Values returns all elements of the SigningAlg enum

func SummaryMetricConfigurationStatus_Values ¶

func SummaryMetricConfigurationStatus_Values() []string

SummaryMetricConfigurationStatus_Values returns all elements of the SummaryMetricConfigurationStatus enum

func SupportedRfRegion_Values ¶

func SupportedRfRegion_Values() []string

SupportedRfRegion_Values returns all elements of the SupportedRfRegion enum

func WirelessDeviceEvent_Values ¶

func WirelessDeviceEvent_Values() []string

WirelessDeviceEvent_Values returns all elements of the WirelessDeviceEvent enum

func WirelessDeviceFrameInfo_Values ¶

func WirelessDeviceFrameInfo_Values() []string

WirelessDeviceFrameInfo_Values returns all elements of the WirelessDeviceFrameInfo enum

func WirelessDeviceIdType_Values ¶

func WirelessDeviceIdType_Values() []string

WirelessDeviceIdType_Values returns all elements of the WirelessDeviceIdType enum

func WirelessDeviceSidewalkStatus_Values ¶

func WirelessDeviceSidewalkStatus_Values() []string

WirelessDeviceSidewalkStatus_Values returns all elements of the WirelessDeviceSidewalkStatus enum

func WirelessDeviceType_Values ¶

func WirelessDeviceType_Values() []string

WirelessDeviceType_Values returns all elements of the WirelessDeviceType enum

func WirelessGatewayEvent_Values ¶

func WirelessGatewayEvent_Values() []string

WirelessGatewayEvent_Values returns all elements of the WirelessGatewayEvent enum

func WirelessGatewayIdType_Values ¶

func WirelessGatewayIdType_Values() []string

WirelessGatewayIdType_Values returns all elements of the WirelessGatewayIdType enum

func WirelessGatewayServiceType_Values ¶

func WirelessGatewayServiceType_Values() []string

WirelessGatewayServiceType_Values returns all elements of the WirelessGatewayServiceType enum

func WirelessGatewayTaskDefinitionType_Values ¶

func WirelessGatewayTaskDefinitionType_Values() []string

WirelessGatewayTaskDefinitionType_Values returns all elements of the WirelessGatewayTaskDefinitionType enum

func WirelessGatewayTaskStatus_Values ¶

func WirelessGatewayTaskStatus_Values() []string

WirelessGatewayTaskStatus_Values returns all elements of the WirelessGatewayTaskStatus enum

func WirelessGatewayType_Values ¶

func WirelessGatewayType_Values() []string

WirelessGatewayType_Values returns all elements of the WirelessGatewayType enum

type AbpV10X ¶

type AbpV10X struct {

    // The DevAddr value.
    DevAddr *string `type:"string"`

    // The FCnt init value.
    FCntStart *int64 `type:"integer"`

    // Session keys for ABP v1.0.x
    SessionKeys *SessionKeysAbpV10X `type:"structure"`
    // contains filtered or unexported fields
}

ABP device object for LoRaWAN specification v1.0.x

func (AbpV10X) GoString ¶

func (s AbpV10X) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AbpV10X) SetDevAddr ¶

func (s *AbpV10X) SetDevAddr(v string) *AbpV10X

SetDevAddr sets the DevAddr field's value.

func (*AbpV10X) SetFCntStart ¶

func (s *AbpV10X) SetFCntStart(v int64) *AbpV10X

SetFCntStart sets the FCntStart field's value.

func (*AbpV10X) SetSessionKeys ¶

func (s *AbpV10X) SetSessionKeys(v *SessionKeysAbpV10X) *AbpV10X

SetSessionKeys sets the SessionKeys field's value.

func (AbpV10X) String ¶

func (s AbpV10X) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AbpV11 ¶

type AbpV11 struct {

    // The DevAddr value.
    DevAddr *string `type:"string"`

    // The FCnt init value.
    FCntStart *int64 `type:"integer"`

    // Session keys for ABP v1.1
    SessionKeys *SessionKeysAbpV11 `type:"structure"`
    // contains filtered or unexported fields
}

ABP device object for LoRaWAN specification v1.1

func (AbpV11) GoString ¶

func (s AbpV11) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AbpV11) SetDevAddr ¶

func (s *AbpV11) SetDevAddr(v string) *AbpV11

SetDevAddr sets the DevAddr field's value.

func (*AbpV11) SetFCntStart ¶

func (s *AbpV11) SetFCntStart(v int64) *AbpV11

SetFCntStart sets the FCntStart field's value.

func (*AbpV11) SetSessionKeys ¶

func (s *AbpV11) SetSessionKeys(v *SessionKeysAbpV11) *AbpV11

SetSessionKeys sets the SessionKeys field's value.

func (AbpV11) String ¶

func (s AbpV11) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AccessDeniedException ¶

type AccessDeniedException struct {
    RespMetadata protocol.ResponseMetadata `json:"-" xml:"-"`

    Message_ *string `locationName:"Message" type:"string"`
    // contains filtered or unexported fields
}

User does not have permission to perform this action.

func (*AccessDeniedException) Code ¶

func (s *AccessDeniedException) Code() string

Code returns the exception type name.

func (*AccessDeniedException) Error ¶

func (s *AccessDeniedException) Error() string

func (AccessDeniedException) GoString ¶

func (s AccessDeniedException) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AccessDeniedException) Message ¶

func (s *AccessDeniedException) Message() string

Message returns the exception's message.

func (*AccessDeniedException) OrigErr ¶

func (s *AccessDeniedException) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*AccessDeniedException) RequestID ¶

func (s *AccessDeniedException) RequestID() string

RequestID returns the service's response RequestID for request.

func (*AccessDeniedException) StatusCode ¶

func (s *AccessDeniedException) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (AccessDeniedException) String ¶

func (s AccessDeniedException) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type Accuracy ¶

type Accuracy struct {

    // The horizontal accuracy of the estimated position, which is the difference
    // between the estimated location and the actual device location.
    HorizontalAccuracy *float64 `type:"float"`

    // The vertical accuracy of the estimated position, which is the difference
    // between the estimated altitude and actual device latitude in meters.
    VerticalAccuracy *float64 `type:"float"`
    // contains filtered or unexported fields
}

The accuracy of the estimated position in meters. An empty value indicates that no position data is available. A value of ‘0.0’ value indicates that position data is available. This data corresponds to the position information that you specified instead of the position computed by solver.

func (Accuracy) GoString ¶

func (s Accuracy) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Accuracy) SetHorizontalAccuracy ¶

func (s *Accuracy) SetHorizontalAccuracy(v float64) *Accuracy

SetHorizontalAccuracy sets the HorizontalAccuracy field's value.

func (*Accuracy) SetVerticalAccuracy ¶

func (s *Accuracy) SetVerticalAccuracy(v float64) *Accuracy

SetVerticalAccuracy sets the VerticalAccuracy field's value.

func (Accuracy) String ¶

func (s Accuracy) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ApplicationConfig ¶

type ApplicationConfig struct {

    // The name of the position data destination that describes the AWS IoT rule
    // that processes the device's position data for use by AWS IoT Core for LoRaWAN.
    DestinationName *string `type:"string"`

    // The Fport value.
    FPort *int64 `min:"1" type:"integer"`

    // Application type, which can be specified to obtain real-time position information
    // of your LoRaWAN device.
    Type *string `type:"string" enum:"ApplicationConfigType"`
    // contains filtered or unexported fields
}

LoRaWAN application configuration, which can be used to perform geolocation.

func (ApplicationConfig) GoString ¶

func (s ApplicationConfig) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ApplicationConfig) SetDestinationName ¶

func (s *ApplicationConfig) SetDestinationName(v string) *ApplicationConfig

SetDestinationName sets the DestinationName field's value.

func (*ApplicationConfig) SetFPort ¶

func (s *ApplicationConfig) SetFPort(v int64) *ApplicationConfig

SetFPort sets the FPort field's value.

func (*ApplicationConfig) SetType ¶

func (s *ApplicationConfig) SetType(v string) *ApplicationConfig

SetType sets the Type field's value.

func (ApplicationConfig) String ¶

func (s ApplicationConfig) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ApplicationConfig) Validate ¶

func (s *ApplicationConfig) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateAwsAccountWithPartnerAccountInput ¶

type AssociateAwsAccountWithPartnerAccountInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The Sidewalk account credentials.
    //
    // Sidewalk is a required field
    Sidewalk *SidewalkAccountInfo `type:"structure" required:"true"`

    // The tags to attach to the specified resource. Tags are metadata that you
    // can use to manage a resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (AssociateAwsAccountWithPartnerAccountInput) GoString ¶

func (s AssociateAwsAccountWithPartnerAccountInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateAwsAccountWithPartnerAccountInput) SetClientRequestToken ¶

func (s *AssociateAwsAccountWithPartnerAccountInput) SetClientRequestToken(v string) *AssociateAwsAccountWithPartnerAccountInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*AssociateAwsAccountWithPartnerAccountInput) SetSidewalk ¶

func (s *AssociateAwsAccountWithPartnerAccountInput) SetSidewalk(v *SidewalkAccountInfo) *AssociateAwsAccountWithPartnerAccountInput

SetSidewalk sets the Sidewalk field's value.

func (*AssociateAwsAccountWithPartnerAccountInput) SetTags ¶

func (s *AssociateAwsAccountWithPartnerAccountInput) SetTags(v []*Tag) *AssociateAwsAccountWithPartnerAccountInput

SetTags sets the Tags field's value.

func (AssociateAwsAccountWithPartnerAccountInput) String ¶

func (s AssociateAwsAccountWithPartnerAccountInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateAwsAccountWithPartnerAccountInput) Validate ¶

func (s *AssociateAwsAccountWithPartnerAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateAwsAccountWithPartnerAccountOutput ¶

type AssociateAwsAccountWithPartnerAccountOutput struct {

    // The Amazon Resource Name of the resource.
    Arn *string `type:"string"`

    // The Sidewalk account credentials.
    Sidewalk *SidewalkAccountInfo `type:"structure"`
    // contains filtered or unexported fields
}

func (AssociateAwsAccountWithPartnerAccountOutput) GoString ¶

func (s AssociateAwsAccountWithPartnerAccountOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateAwsAccountWithPartnerAccountOutput) SetArn ¶

func (s *AssociateAwsAccountWithPartnerAccountOutput) SetArn(v string) *AssociateAwsAccountWithPartnerAccountOutput

SetArn sets the Arn field's value.

func (*AssociateAwsAccountWithPartnerAccountOutput) SetSidewalk ¶

func (s *AssociateAwsAccountWithPartnerAccountOutput) SetSidewalk(v *SidewalkAccountInfo) *AssociateAwsAccountWithPartnerAccountOutput

SetSidewalk sets the Sidewalk field's value.

func (AssociateAwsAccountWithPartnerAccountOutput) String ¶

func (s AssociateAwsAccountWithPartnerAccountOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateMulticastGroupWithFuotaTaskInput ¶

type AssociateMulticastGroupWithFuotaTaskInput struct {

    // The ID of a FUOTA task.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the multicast group.
    //
    // MulticastGroupId is a required field
    MulticastGroupId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateMulticastGroupWithFuotaTaskInput) GoString ¶

func (s AssociateMulticastGroupWithFuotaTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateMulticastGroupWithFuotaTaskInput) SetId ¶

func (s *AssociateMulticastGroupWithFuotaTaskInput) SetId(v string) *AssociateMulticastGroupWithFuotaTaskInput

SetId sets the Id field's value.

func (*AssociateMulticastGroupWithFuotaTaskInput) SetMulticastGroupId ¶

func (s *AssociateMulticastGroupWithFuotaTaskInput) SetMulticastGroupId(v string) *AssociateMulticastGroupWithFuotaTaskInput

SetMulticastGroupId sets the MulticastGroupId field's value.

func (AssociateMulticastGroupWithFuotaTaskInput) String ¶

func (s AssociateMulticastGroupWithFuotaTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateMulticastGroupWithFuotaTaskInput) Validate ¶

func (s *AssociateMulticastGroupWithFuotaTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateMulticastGroupWithFuotaTaskOutput ¶

type AssociateMulticastGroupWithFuotaTaskOutput struct {
    // contains filtered or unexported fields
}

func (AssociateMulticastGroupWithFuotaTaskOutput) GoString ¶

func (s AssociateMulticastGroupWithFuotaTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (AssociateMulticastGroupWithFuotaTaskOutput) String ¶

func (s AssociateMulticastGroupWithFuotaTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateWirelessDeviceWithFuotaTaskInput ¶

type AssociateWirelessDeviceWithFuotaTaskInput struct {

    // The ID of a FUOTA task.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the wireless device.
    //
    // WirelessDeviceId is a required field
    WirelessDeviceId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateWirelessDeviceWithFuotaTaskInput) GoString ¶

func (s AssociateWirelessDeviceWithFuotaTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessDeviceWithFuotaTaskInput) SetId ¶

func (s *AssociateWirelessDeviceWithFuotaTaskInput) SetId(v string) *AssociateWirelessDeviceWithFuotaTaskInput

SetId sets the Id field's value.

func (*AssociateWirelessDeviceWithFuotaTaskInput) SetWirelessDeviceId ¶

func (s *AssociateWirelessDeviceWithFuotaTaskInput) SetWirelessDeviceId(v string) *AssociateWirelessDeviceWithFuotaTaskInput

SetWirelessDeviceId sets the WirelessDeviceId field's value.

func (AssociateWirelessDeviceWithFuotaTaskInput) String ¶

func (s AssociateWirelessDeviceWithFuotaTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessDeviceWithFuotaTaskInput) Validate ¶

func (s *AssociateWirelessDeviceWithFuotaTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateWirelessDeviceWithFuotaTaskOutput ¶

type AssociateWirelessDeviceWithFuotaTaskOutput struct {
    // contains filtered or unexported fields
}

func (AssociateWirelessDeviceWithFuotaTaskOutput) GoString ¶

func (s AssociateWirelessDeviceWithFuotaTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (AssociateWirelessDeviceWithFuotaTaskOutput) String ¶

func (s AssociateWirelessDeviceWithFuotaTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateWirelessDeviceWithMulticastGroupInput ¶

type AssociateWirelessDeviceWithMulticastGroupInput struct {

    // The ID of the multicast group.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the wireless device.
    //
    // WirelessDeviceId is a required field
    WirelessDeviceId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateWirelessDeviceWithMulticastGroupInput) GoString ¶

func (s AssociateWirelessDeviceWithMulticastGroupInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessDeviceWithMulticastGroupInput) SetId ¶

func (s *AssociateWirelessDeviceWithMulticastGroupInput) SetId(v string) *AssociateWirelessDeviceWithMulticastGroupInput

SetId sets the Id field's value.

func (*AssociateWirelessDeviceWithMulticastGroupInput) SetWirelessDeviceId ¶

func (s *AssociateWirelessDeviceWithMulticastGroupInput) SetWirelessDeviceId(v string) *AssociateWirelessDeviceWithMulticastGroupInput

SetWirelessDeviceId sets the WirelessDeviceId field's value.

func (AssociateWirelessDeviceWithMulticastGroupInput) String ¶

func (s AssociateWirelessDeviceWithMulticastGroupInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessDeviceWithMulticastGroupInput) Validate ¶

func (s *AssociateWirelessDeviceWithMulticastGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateWirelessDeviceWithMulticastGroupOutput ¶

type AssociateWirelessDeviceWithMulticastGroupOutput struct {
    // contains filtered or unexported fields
}

func (AssociateWirelessDeviceWithMulticastGroupOutput) GoString ¶

func (s AssociateWirelessDeviceWithMulticastGroupOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (AssociateWirelessDeviceWithMulticastGroupOutput) String ¶

func (s AssociateWirelessDeviceWithMulticastGroupOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateWirelessDeviceWithThingInput ¶

type AssociateWirelessDeviceWithThingInput struct {

    // The ID of the resource to update.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ARN of the thing to associate with the wireless device.
    //
    // ThingArn is a required field
    ThingArn *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateWirelessDeviceWithThingInput) GoString ¶

func (s AssociateWirelessDeviceWithThingInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessDeviceWithThingInput) SetId ¶

func (s *AssociateWirelessDeviceWithThingInput) SetId(v string) *AssociateWirelessDeviceWithThingInput

SetId sets the Id field's value.

func (*AssociateWirelessDeviceWithThingInput) SetThingArn ¶

func (s *AssociateWirelessDeviceWithThingInput) SetThingArn(v string) *AssociateWirelessDeviceWithThingInput

SetThingArn sets the ThingArn field's value.

func (AssociateWirelessDeviceWithThingInput) String ¶

func (s AssociateWirelessDeviceWithThingInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessDeviceWithThingInput) Validate ¶

func (s *AssociateWirelessDeviceWithThingInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateWirelessDeviceWithThingOutput ¶

type AssociateWirelessDeviceWithThingOutput struct {
    // contains filtered or unexported fields
}

func (AssociateWirelessDeviceWithThingOutput) GoString ¶

func (s AssociateWirelessDeviceWithThingOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (AssociateWirelessDeviceWithThingOutput) String ¶

func (s AssociateWirelessDeviceWithThingOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateWirelessGatewayWithCertificateInput ¶

type AssociateWirelessGatewayWithCertificateInput struct {

    // The ID of the resource to update.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the certificate to associate with the wireless gateway.
    //
    // IotCertificateId is a required field
    IotCertificateId *string `min:"1" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateWirelessGatewayWithCertificateInput) GoString ¶

func (s AssociateWirelessGatewayWithCertificateInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessGatewayWithCertificateInput) SetId ¶

func (s *AssociateWirelessGatewayWithCertificateInput) SetId(v string) *AssociateWirelessGatewayWithCertificateInput

SetId sets the Id field's value.

func (*AssociateWirelessGatewayWithCertificateInput) SetIotCertificateId ¶

func (s *AssociateWirelessGatewayWithCertificateInput) SetIotCertificateId(v string) *AssociateWirelessGatewayWithCertificateInput

SetIotCertificateId sets the IotCertificateId field's value.

func (AssociateWirelessGatewayWithCertificateInput) String ¶

func (s AssociateWirelessGatewayWithCertificateInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessGatewayWithCertificateInput) Validate ¶

func (s *AssociateWirelessGatewayWithCertificateInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateWirelessGatewayWithCertificateOutput ¶

type AssociateWirelessGatewayWithCertificateOutput struct {

    // The ID of the certificate associated with the wireless gateway.
    IotCertificateId *string `min:"1" type:"string"`
    // contains filtered or unexported fields
}

func (AssociateWirelessGatewayWithCertificateOutput) GoString ¶

func (s AssociateWirelessGatewayWithCertificateOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessGatewayWithCertificateOutput) SetIotCertificateId ¶

func (s *AssociateWirelessGatewayWithCertificateOutput) SetIotCertificateId(v string) *AssociateWirelessGatewayWithCertificateOutput

SetIotCertificateId sets the IotCertificateId field's value.

func (AssociateWirelessGatewayWithCertificateOutput) String ¶

func (s AssociateWirelessGatewayWithCertificateOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateWirelessGatewayWithThingInput ¶

type AssociateWirelessGatewayWithThingInput struct {

    // The ID of the resource to update.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ARN of the thing to associate with the wireless gateway.
    //
    // ThingArn is a required field
    ThingArn *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateWirelessGatewayWithThingInput) GoString ¶

func (s AssociateWirelessGatewayWithThingInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessGatewayWithThingInput) SetId ¶

func (s *AssociateWirelessGatewayWithThingInput) SetId(v string) *AssociateWirelessGatewayWithThingInput

SetId sets the Id field's value.

func (*AssociateWirelessGatewayWithThingInput) SetThingArn ¶

func (s *AssociateWirelessGatewayWithThingInput) SetThingArn(v string) *AssociateWirelessGatewayWithThingInput

SetThingArn sets the ThingArn field's value.

func (AssociateWirelessGatewayWithThingInput) String ¶

func (s AssociateWirelessGatewayWithThingInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateWirelessGatewayWithThingInput) Validate ¶

func (s *AssociateWirelessGatewayWithThingInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateWirelessGatewayWithThingOutput ¶

type AssociateWirelessGatewayWithThingOutput struct {
    // contains filtered or unexported fields
}

func (AssociateWirelessGatewayWithThingOutput) GoString ¶

func (s AssociateWirelessGatewayWithThingOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (AssociateWirelessGatewayWithThingOutput) String ¶

func (s AssociateWirelessGatewayWithThingOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type Beaconing ¶

type Beaconing struct {

    // The data rate for gateways that are sending the beacons.
    DataRate *int64 `type:"integer"`

    // The frequency list for the gateways to send the beacons.
    Frequencies []*int64 `type:"list"`
    // contains filtered or unexported fields
}

Beaconing parameters for configuring the wireless gateways.

func (Beaconing) GoString ¶

func (s Beaconing) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Beaconing) SetDataRate ¶

func (s *Beaconing) SetDataRate(v int64) *Beaconing

SetDataRate sets the DataRate field's value.

func (*Beaconing) SetFrequencies ¶

func (s *Beaconing) SetFrequencies(v []*int64) *Beaconing

SetFrequencies sets the Frequencies field's value.

func (Beaconing) String ¶

func (s Beaconing) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CancelMulticastGroupSessionInput ¶

type CancelMulticastGroupSessionInput struct {

    // The ID of the multicast group.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CancelMulticastGroupSessionInput) GoString ¶

func (s CancelMulticastGroupSessionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CancelMulticastGroupSessionInput) SetId ¶

func (s *CancelMulticastGroupSessionInput) SetId(v string) *CancelMulticastGroupSessionInput

SetId sets the Id field's value.

func (CancelMulticastGroupSessionInput) String ¶

func (s CancelMulticastGroupSessionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CancelMulticastGroupSessionInput) Validate ¶

func (s *CancelMulticastGroupSessionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelMulticastGroupSessionOutput ¶

type CancelMulticastGroupSessionOutput struct {
    // contains filtered or unexported fields
}

func (CancelMulticastGroupSessionOutput) GoString ¶

func (s CancelMulticastGroupSessionOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (CancelMulticastGroupSessionOutput) String ¶

func (s CancelMulticastGroupSessionOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CdmaLocalId ¶

type CdmaLocalId struct {

    // CDMA channel information.
    //
    // CdmaChannel is a required field
    CdmaChannel *int64 `type:"integer" required:"true"`

    // Pseudo-noise offset, which is a characteristic of the signal from a cell
    // on a radio tower.
    //
    // PnOffset is a required field
    PnOffset *int64 `type:"integer" required:"true"`
    // contains filtered or unexported fields
}

CDMA local ID information, which corresponds to the local identification parameters of a CDMA cell.

func (CdmaLocalId) GoString ¶

func (s CdmaLocalId) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CdmaLocalId) SetCdmaChannel ¶

func (s *CdmaLocalId) SetCdmaChannel(v int64) *CdmaLocalId

SetCdmaChannel sets the CdmaChannel field's value.

func (*CdmaLocalId) SetPnOffset ¶

func (s *CdmaLocalId) SetPnOffset(v int64) *CdmaLocalId

SetPnOffset sets the PnOffset field's value.

func (CdmaLocalId) String ¶

func (s CdmaLocalId) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CdmaLocalId) Validate ¶

func (s *CdmaLocalId) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CdmaNmrObj ¶

type CdmaNmrObj struct {

    // CDMA base station ID (BSID).
    BaseStationId *int64 `type:"integer"`

    // CDMA channel information.
    //
    // CdmaChannel is a required field
    CdmaChannel *int64 `type:"integer" required:"true"`

    // Transmit power level of the pilot signal, measured in dBm (decibel-milliwatts).
    PilotPower *int64 `type:"integer"`

    // Pseudo-noise offset, which is a characteristic of the signal from a cell
    // on a radio tower.
    //
    // PnOffset is a required field
    PnOffset *int64 `type:"integer" required:"true"`
    // contains filtered or unexported fields
}

CDMA object for network measurement reports.

func (CdmaNmrObj) GoString ¶

func (s CdmaNmrObj) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CdmaNmrObj) SetBaseStationId ¶

func (s *CdmaNmrObj) SetBaseStationId(v int64) *CdmaNmrObj

SetBaseStationId sets the BaseStationId field's value.

func (*CdmaNmrObj) SetCdmaChannel ¶

func (s *CdmaNmrObj) SetCdmaChannel(v int64) *CdmaNmrObj

SetCdmaChannel sets the CdmaChannel field's value.

func (*CdmaNmrObj) SetPilotPower ¶

func (s *CdmaNmrObj) SetPilotPower(v int64) *CdmaNmrObj

SetPilotPower sets the PilotPower field's value.

func (*CdmaNmrObj) SetPnOffset ¶

func (s *CdmaNmrObj) SetPnOffset(v int64) *CdmaNmrObj

SetPnOffset sets the PnOffset field's value.

func (CdmaNmrObj) String ¶

func (s CdmaNmrObj) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CdmaNmrObj) Validate ¶

func (s *CdmaNmrObj) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CdmaObj ¶

type CdmaObj struct {

    // CDMA base station latitude in degrees.
    BaseLat *float64 `type:"float"`

    // CDMA base station longitude in degrees.
    BaseLng *float64 `type:"float"`

    // CDMA base station ID (BSID).
    //
    // BaseStationId is a required field
    BaseStationId *int64 `type:"integer" required:"true"`

    // CDMA local identification (local ID) parameters.
    CdmaLocalId *CdmaLocalId `type:"structure"`

    // CDMA network measurement reports.
    CdmaNmr []*CdmaNmrObj `min:"1" type:"list"`

    // CDMA network ID (NID).
    //
    // NetworkId is a required field
    NetworkId *int64 `type:"integer" required:"true"`

    // Transmit power level of the pilot signal, measured in dBm (decibel-milliwatts).
    PilotPower *int64 `type:"integer"`

    // CDMA registration zone (RZ).
    RegistrationZone *int64 `type:"integer"`

    // CDMA system ID (SID).
    //
    // SystemId is a required field
    SystemId *int64 `min:"1" type:"integer" required:"true"`
    // contains filtered or unexported fields
}

CDMA (Code-division multiple access) object.

func (CdmaObj) GoString ¶

func (s CdmaObj) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CdmaObj) SetBaseLat ¶

func (s *CdmaObj) SetBaseLat(v float64) *CdmaObj

SetBaseLat sets the BaseLat field's value.

func (*CdmaObj) SetBaseLng ¶

func (s *CdmaObj) SetBaseLng(v float64) *CdmaObj

SetBaseLng sets the BaseLng field's value.

func (*CdmaObj) SetBaseStationId ¶

func (s *CdmaObj) SetBaseStationId(v int64) *CdmaObj

SetBaseStationId sets the BaseStationId field's value.

func (*CdmaObj) SetCdmaLocalId ¶

func (s *CdmaObj) SetCdmaLocalId(v *CdmaLocalId) *CdmaObj

SetCdmaLocalId sets the CdmaLocalId field's value.

func (*CdmaObj) SetCdmaNmr ¶

func (s *CdmaObj) SetCdmaNmr(v []*CdmaNmrObj) *CdmaObj

SetCdmaNmr sets the CdmaNmr field's value.

func (*CdmaObj) SetNetworkId ¶

func (s *CdmaObj) SetNetworkId(v int64) *CdmaObj

SetNetworkId sets the NetworkId field's value.

func (*CdmaObj) SetPilotPower ¶

func (s *CdmaObj) SetPilotPower(v int64) *CdmaObj

SetPilotPower sets the PilotPower field's value.

func (*CdmaObj) SetRegistrationZone ¶

func (s *CdmaObj) SetRegistrationZone(v int64) *CdmaObj

SetRegistrationZone sets the RegistrationZone field's value.

func (*CdmaObj) SetSystemId ¶

func (s *CdmaObj) SetSystemId(v int64) *CdmaObj

SetSystemId sets the SystemId field's value.

func (CdmaObj) String ¶

func (s CdmaObj) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CdmaObj) Validate ¶

func (s *CdmaObj) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CellTowers ¶

type CellTowers struct {

    // CDMA object information.
    Cdma []*CdmaObj `min:"1" type:"list"`

    // GSM object information.
    Gsm []*GsmObj `min:"1" type:"list"`

    // LTE object information.
    Lte []*LteObj `min:"1" type:"list"`

    // TD-SCDMA object information.
    Tdscdma []*TdscdmaObj `min:"1" type:"list"`

    // WCDMA object information.
    Wcdma []*WcdmaObj `min:"1" type:"list"`
    // contains filtered or unexported fields
}

The cell towers that were used to perform the measurements.

func (CellTowers) GoString ¶

func (s CellTowers) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CellTowers) SetCdma ¶

func (s *CellTowers) SetCdma(v []*CdmaObj) *CellTowers

SetCdma sets the Cdma field's value.

func (*CellTowers) SetGsm ¶

func (s *CellTowers) SetGsm(v []*GsmObj) *CellTowers

SetGsm sets the Gsm field's value.

func (*CellTowers) SetLte ¶

func (s *CellTowers) SetLte(v []*LteObj) *CellTowers

SetLte sets the Lte field's value.

func (*CellTowers) SetTdscdma ¶

func (s *CellTowers) SetTdscdma(v []*TdscdmaObj) *CellTowers

SetTdscdma sets the Tdscdma field's value.

func (*CellTowers) SetWcdma ¶

func (s *CellTowers) SetWcdma(v []*WcdmaObj) *CellTowers

SetWcdma sets the Wcdma field's value.

func (CellTowers) String ¶

func (s CellTowers) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CellTowers) Validate ¶

func (s *CellTowers) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CertificateList ¶

type CertificateList struct {

    // The certificate chain algorithm provided by sidewalk.
    //
    // SigningAlg is a required field
    SigningAlg *string `type:"string" required:"true" enum:"SigningAlg"`

    // The value of the chosen sidewalk certificate.
    //
    // Value is a required field
    Value *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

List of sidewalk certificates.

func (CertificateList) GoString ¶

func (s CertificateList) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CertificateList) SetSigningAlg ¶

func (s *CertificateList) SetSigningAlg(v string) *CertificateList

SetSigningAlg sets the SigningAlg field's value.

func (*CertificateList) SetValue ¶

func (s *CertificateList) SetValue(v string) *CertificateList

SetValue sets the Value field's value.

func (CertificateList) String ¶

func (s CertificateList) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConflictException ¶

type ConflictException struct {
    RespMetadata protocol.ResponseMetadata `json:"-" xml:"-"`

    Message_ *string `locationName:"Message" type:"string"`

    // Id of the resource in the conflicting operation.
    ResourceId *string `type:"string"`

    // Type of the resource in the conflicting operation.
    ResourceType *string `type:"string"`
    // contains filtered or unexported fields
}

Adding, updating, or deleting the resource can cause an inconsistent state.

func (*ConflictException) Code ¶

func (s *ConflictException) Code() string

Code returns the exception type name.

func (*ConflictException) Error ¶

func (s *ConflictException) Error() string

func (ConflictException) GoString ¶

func (s ConflictException) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConflictException) Message ¶

func (s *ConflictException) Message() string

Message returns the exception's message.

func (*ConflictException) OrigErr ¶

func (s *ConflictException) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*ConflictException) RequestID ¶

func (s *ConflictException) RequestID() string

RequestID returns the service's response RequestID for request.

func (*ConflictException) StatusCode ¶

func (s *ConflictException) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (ConflictException) String ¶

func (s ConflictException) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConnectionStatusEventConfiguration ¶

type ConnectionStatusEventConfiguration struct {

    // Connection status event configuration object for enabling or disabling LoRaWAN
    // related event topics.
    LoRaWAN *LoRaWANConnectionStatusEventNotificationConfigurations `type:"structure"`

    // Denotes whether the wireless gateway ID connection status event topic is
    // enabled or disabled.
    WirelessGatewayIdEventTopic *string `type:"string" enum:"EventNotificationTopicStatus"`
    // contains filtered or unexported fields
}

Connection status event configuration object for enabling or disabling topic.

func (ConnectionStatusEventConfiguration) GoString ¶

func (s ConnectionStatusEventConfiguration) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConnectionStatusEventConfiguration) SetLoRaWAN ¶

func (s *ConnectionStatusEventConfiguration) SetLoRaWAN(v *LoRaWANConnectionStatusEventNotificationConfigurations) *ConnectionStatusEventConfiguration

SetLoRaWAN sets the LoRaWAN field's value.

func (*ConnectionStatusEventConfiguration) SetWirelessGatewayIdEventTopic ¶

func (s *ConnectionStatusEventConfiguration) SetWirelessGatewayIdEventTopic(v string) *ConnectionStatusEventConfiguration

SetWirelessGatewayIdEventTopic sets the WirelessGatewayIdEventTopic field's value.

func (ConnectionStatusEventConfiguration) String ¶

func (s ConnectionStatusEventConfiguration) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConnectionStatusResourceTypeEventConfiguration ¶

type ConnectionStatusResourceTypeEventConfiguration struct {

    // Connection status resource type event configuration object for enabling or
    // disabling LoRaWAN related event topics.
    LoRaWAN *LoRaWANConnectionStatusResourceTypeEventConfiguration `type:"structure"`
    // contains filtered or unexported fields
}

Connection status resource type event configuration object for enabling or disabling topic.

func (ConnectionStatusResourceTypeEventConfiguration) GoString ¶

func (s ConnectionStatusResourceTypeEventConfiguration) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConnectionStatusResourceTypeEventConfiguration) SetLoRaWAN ¶

func (s *ConnectionStatusResourceTypeEventConfiguration) SetLoRaWAN(v *LoRaWANConnectionStatusResourceTypeEventConfiguration) *ConnectionStatusResourceTypeEventConfiguration

SetLoRaWAN sets the LoRaWAN field's value.

func (ConnectionStatusResourceTypeEventConfiguration) String ¶

func (s ConnectionStatusResourceTypeEventConfiguration) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateDestinationInput ¶

type CreateDestinationInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The description of the new resource.
    Description *string `type:"string"`

    // The rule name or topic rule to send messages to.
    //
    // Expression is a required field
    Expression *string `type:"string" required:"true"`

    // The type of value in Expression.
    //
    // ExpressionType is a required field
    ExpressionType *string `type:"string" required:"true" enum:"ExpressionType"`

    // The name of the new resource.
    //
    // Name is a required field
    Name *string `type:"string" required:"true"`

    // The ARN of the IAM Role that authorizes the destination.
    //
    // RoleArn is a required field
    RoleArn *string `min:"20" type:"string" required:"true"`

    // The tags to attach to the new destination. Tags are metadata that you can
    // use to manage a resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (CreateDestinationInput) GoString ¶

func (s CreateDestinationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDestinationInput) SetClientRequestToken ¶

func (s *CreateDestinationInput) SetClientRequestToken(v string) *CreateDestinationInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateDestinationInput) SetDescription ¶

func (s *CreateDestinationInput) SetDescription(v string) *CreateDestinationInput

SetDescription sets the Description field's value.

func (*CreateDestinationInput) SetExpression ¶

func (s *CreateDestinationInput) SetExpression(v string) *CreateDestinationInput

SetExpression sets the Expression field's value.

func (*CreateDestinationInput) SetExpressionType ¶

func (s *CreateDestinationInput) SetExpressionType(v string) *CreateDestinationInput

SetExpressionType sets the ExpressionType field's value.

func (*CreateDestinationInput) SetName ¶

func (s *CreateDestinationInput) SetName(v string) *CreateDestinationInput

SetName sets the Name field's value.

func (*CreateDestinationInput) SetRoleArn ¶

func (s *CreateDestinationInput) SetRoleArn(v string) *CreateDestinationInput

SetRoleArn sets the RoleArn field's value.

func (*CreateDestinationInput) SetTags ¶

func (s *CreateDestinationInput) SetTags(v []*Tag) *CreateDestinationInput

SetTags sets the Tags field's value.

func (CreateDestinationInput) String ¶

func (s CreateDestinationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDestinationInput) Validate ¶

func (s *CreateDestinationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDestinationOutput ¶

type CreateDestinationOutput struct {

    // The Amazon Resource Name of the new resource.
    Arn *string `type:"string"`

    // The name of the new resource.
    Name *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateDestinationOutput) GoString ¶

func (s CreateDestinationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDestinationOutput) SetArn ¶

func (s *CreateDestinationOutput) SetArn(v string) *CreateDestinationOutput

SetArn sets the Arn field's value.

func (*CreateDestinationOutput) SetName ¶

func (s *CreateDestinationOutput) SetName(v string) *CreateDestinationOutput

SetName sets the Name field's value.

func (CreateDestinationOutput) String ¶

func (s CreateDestinationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateDeviceProfileInput ¶

type CreateDeviceProfileInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The device profile information to use to create the device profile.
    LoRaWAN *LoRaWANDeviceProfile `type:"structure"`

    // The name of the new resource.
    Name *string `type:"string"`

    // The Sidewalk-related information for creating the Sidewalk device profile.
    Sidewalk *SidewalkCreateDeviceProfile `type:"structure"`

    // The tags to attach to the new device profile. Tags are metadata that you
    // can use to manage a resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (CreateDeviceProfileInput) GoString ¶

func (s CreateDeviceProfileInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDeviceProfileInput) SetClientRequestToken ¶

func (s *CreateDeviceProfileInput) SetClientRequestToken(v string) *CreateDeviceProfileInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateDeviceProfileInput) SetLoRaWAN ¶

func (s *CreateDeviceProfileInput) SetLoRaWAN(v *LoRaWANDeviceProfile) *CreateDeviceProfileInput

SetLoRaWAN sets the LoRaWAN field's value.

func (*CreateDeviceProfileInput) SetName ¶

func (s *CreateDeviceProfileInput) SetName(v string) *CreateDeviceProfileInput

SetName sets the Name field's value.

func (*CreateDeviceProfileInput) SetSidewalk ¶

func (s *CreateDeviceProfileInput) SetSidewalk(v *SidewalkCreateDeviceProfile) *CreateDeviceProfileInput

SetSidewalk sets the Sidewalk field's value.

func (*CreateDeviceProfileInput) SetTags ¶

func (s *CreateDeviceProfileInput) SetTags(v []*Tag) *CreateDeviceProfileInput

SetTags sets the Tags field's value.

func (CreateDeviceProfileInput) String ¶

func (s CreateDeviceProfileInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDeviceProfileInput) Validate ¶

func (s *CreateDeviceProfileInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDeviceProfileOutput ¶

type CreateDeviceProfileOutput struct {

    // The Amazon Resource Name of the new resource.
    Arn *string `type:"string"`

    // The ID of the new device profile.
    Id *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateDeviceProfileOutput) GoString ¶

func (s CreateDeviceProfileOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDeviceProfileOutput) SetArn ¶

func (s *CreateDeviceProfileOutput) SetArn(v string) *CreateDeviceProfileOutput

SetArn sets the Arn field's value.

func (*CreateDeviceProfileOutput) SetId ¶

func (s *CreateDeviceProfileOutput) SetId(v string) *CreateDeviceProfileOutput

SetId sets the Id field's value.

func (CreateDeviceProfileOutput) String ¶

func (s CreateDeviceProfileOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateFuotaTaskInput ¶

type CreateFuotaTaskInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The description of the new resource.
    Description *string `type:"string"`

    // The S3 URI points to a firmware update image that is to be used with a FUOTA
    // task.
    //
    // FirmwareUpdateImage is a required field
    FirmwareUpdateImage *string `min:"1" type:"string" required:"true"`

    // The firmware update role that is to be used with a FUOTA task.
    //
    // FirmwareUpdateRole is a required field
    FirmwareUpdateRole *string `min:"1" type:"string" required:"true"`

    // The interval for sending fragments in milliseconds, rounded to the nearest
    // second.
    //
    // This interval only determines the timing for when the Cloud sends down the
    // fragments to yor device. There can be a delay for when your device will receive
    // these fragments. This delay depends on the device's class and the communication
    // delay with the cloud.
    FragmentIntervalMS *int64 `min:"1" type:"integer"`

    // The size of each fragment in bytes. This parameter is supported only for
    // FUOTA tasks with multicast groups.
    FragmentSizeBytes *int64 `min:"1" type:"integer"`

    // The LoRaWAN information used with a FUOTA task.
    LoRaWAN *LoRaWANFuotaTask `type:"structure"`

    // The name of a FUOTA task.
    Name *string `type:"string"`

    // The percentage of the added fragments that are redundant. For example, if
    // the size of the firmware image file is 100 bytes and the fragment size is
    // 10 bytes, with RedundancyPercent set to 50(%), the final number of encoded
    // fragments is (100 / 10) + (100 / 10 * 50%) = 15.
    RedundancyPercent *int64 `type:"integer"`

    // The tag to attach to the specified resource. Tags are metadata that you can
    // use to manage a resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (CreateFuotaTaskInput) GoString ¶

func (s CreateFuotaTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateFuotaTaskInput) SetClientRequestToken ¶

func (s *CreateFuotaTaskInput) SetClientRequestToken(v string) *CreateFuotaTaskInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateFuotaTaskInput) SetDescription ¶

func (s *CreateFuotaTaskInput) SetDescription(v string) *CreateFuotaTaskInput

SetDescription sets the Description field's value.

func (*CreateFuotaTaskInput) SetFirmwareUpdateImage ¶

func (s *CreateFuotaTaskInput) SetFirmwareUpdateImage(v string) *CreateFuotaTaskInput

SetFirmwareUpdateImage sets the FirmwareUpdateImage field's value.

func (*CreateFuotaTaskInput) SetFirmwareUpdateRole ¶

func (s *CreateFuotaTaskInput) SetFirmwareUpdateRole(v string) *CreateFuotaTaskInput

SetFirmwareUpdateRole sets the FirmwareUpdateRole field's value.

func (*CreateFuotaTaskInput) SetFragmentIntervalMS ¶

func (s *CreateFuotaTaskInput) SetFragmentIntervalMS(v int64) *CreateFuotaTaskInput

SetFragmentIntervalMS sets the FragmentIntervalMS field's value.

func (*CreateFuotaTaskInput) SetFragmentSizeBytes ¶

func (s *CreateFuotaTaskInput) SetFragmentSizeBytes(v int64) *CreateFuotaTaskInput

SetFragmentSizeBytes sets the FragmentSizeBytes field's value.

func (*CreateFuotaTaskInput) SetLoRaWAN ¶

func (s *CreateFuotaTaskInput) SetLoRaWAN(v *LoRaWANFuotaTask) *CreateFuotaTaskInput

SetLoRaWAN sets the LoRaWAN field's value.

func (*CreateFuotaTaskInput) SetName ¶

func (s *CreateFuotaTaskInput) SetName(v string) *CreateFuotaTaskInput

SetName sets the Name field's value.

func (*CreateFuotaTaskInput) SetRedundancyPercent ¶

func (s *CreateFuotaTaskInput) SetRedundancyPercent(v int64) *CreateFuotaTaskInput

SetRedundancyPercent sets the RedundancyPercent field's value.

func (*CreateFuotaTaskInput) SetTags ¶

func (s *CreateFuotaTaskInput) SetTags(v []*Tag) *CreateFuotaTaskInput

SetTags sets the Tags field's value.

func (CreateFuotaTaskInput) String ¶

func (s CreateFuotaTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateFuotaTaskInput) Validate ¶

func (s *CreateFuotaTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateFuotaTaskOutput ¶

type CreateFuotaTaskOutput struct {

    // The arn of a FUOTA task.
    Arn *string `type:"string"`

    // The ID of a FUOTA task.
    Id *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateFuotaTaskOutput) GoString ¶

func (s CreateFuotaTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateFuotaTaskOutput) SetArn ¶

func (s *CreateFuotaTaskOutput) SetArn(v string) *CreateFuotaTaskOutput

SetArn sets the Arn field's value.

func (*CreateFuotaTaskOutput) SetId ¶

func (s *CreateFuotaTaskOutput) SetId(v string) *CreateFuotaTaskOutput

SetId sets the Id field's value.

func (CreateFuotaTaskOutput) String ¶

func (s CreateFuotaTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateMulticastGroupInput ¶

type CreateMulticastGroupInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The description of the multicast group.
    Description *string `type:"string"`

    // The LoRaWAN information that is to be used with the multicast group.
    //
    // LoRaWAN is a required field
    LoRaWAN *LoRaWANMulticast `type:"structure" required:"true"`

    // The name of the multicast group.
    Name *string `type:"string"`

    // The tag to attach to the specified resource. Tags are metadata that you can
    // use to manage a resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (CreateMulticastGroupInput) GoString ¶

func (s CreateMulticastGroupInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateMulticastGroupInput) SetClientRequestToken ¶

func (s *CreateMulticastGroupInput) SetClientRequestToken(v string) *CreateMulticastGroupInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateMulticastGroupInput) SetDescription ¶

func (s *CreateMulticastGroupInput) SetDescription(v string) *CreateMulticastGroupInput

SetDescription sets the Description field's value.

func (*CreateMulticastGroupInput) SetLoRaWAN ¶

func (s *CreateMulticastGroupInput) SetLoRaWAN(v *LoRaWANMulticast) *CreateMulticastGroupInput

SetLoRaWAN sets the LoRaWAN field's value.

func (*CreateMulticastGroupInput) SetName ¶

func (s *CreateMulticastGroupInput) SetName(v string) *CreateMulticastGroupInput

SetName sets the Name field's value.

func (*CreateMulticastGroupInput) SetTags ¶

func (s *CreateMulticastGroupInput) SetTags(v []*Tag) *CreateMulticastGroupInput

SetTags sets the Tags field's value.

func (CreateMulticastGroupInput) String ¶

func (s CreateMulticastGroupInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateMulticastGroupInput) Validate ¶

func (s *CreateMulticastGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateMulticastGroupOutput ¶

type CreateMulticastGroupOutput struct {

    // The arn of the multicast group.
    Arn *string `type:"string"`

    // The ID of the multicast group.
    Id *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateMulticastGroupOutput) GoString ¶

func (s CreateMulticastGroupOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateMulticastGroupOutput) SetArn ¶

func (s *CreateMulticastGroupOutput) SetArn(v string) *CreateMulticastGroupOutput

SetArn sets the Arn field's value.

func (*CreateMulticastGroupOutput) SetId ¶

func (s *CreateMulticastGroupOutput) SetId(v string) *CreateMulticastGroupOutput

SetId sets the Id field's value.

func (CreateMulticastGroupOutput) String ¶

func (s CreateMulticastGroupOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateNetworkAnalyzerConfigurationInput ¶

type CreateNetworkAnalyzerConfigurationInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The description of the new resource.
    Description *string `type:"string"`

    // Multicast Group resources to add to the network analyzer configruation. Provide
    // the MulticastGroupId of the resource to add in the input array.
    MulticastGroups []*string `type:"list"`

    // Name of the network analyzer configuration.
    //
    // Name is a required field
    Name *string `min:"1" type:"string" required:"true"`

    // The tag to attach to the specified resource. Tags are metadata that you can
    // use to manage a resource.
    Tags []*Tag `type:"list"`

    // Trace content for your wireless devices, gateways, and multicast groups.
    TraceContent *TraceContent `type:"structure"`

    // Wireless device resources to add to the network analyzer configuration. Provide
    // the WirelessDeviceId of the resource to add in the input array.
    WirelessDevices []*string `type:"list"`

    // Wireless gateway resources to add to the network analyzer configuration.
    // Provide the WirelessGatewayId of the resource to add in the input array.
    WirelessGateways []*string `type:"list"`
    // contains filtered or unexported fields
}

func (CreateNetworkAnalyzerConfigurationInput) GoString ¶

func (s CreateNetworkAnalyzerConfigurationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateNetworkAnalyzerConfigurationInput) SetClientRequestToken ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetClientRequestToken(v string) *CreateNetworkAnalyzerConfigurationInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateNetworkAnalyzerConfigurationInput) SetDescription ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetDescription(v string) *CreateNetworkAnalyzerConfigurationInput

SetDescription sets the Description field's value.

func (*CreateNetworkAnalyzerConfigurationInput) SetMulticastGroups ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetMulticastGroups(v []*string) *CreateNetworkAnalyzerConfigurationInput

SetMulticastGroups sets the MulticastGroups field's value.

func (*CreateNetworkAnalyzerConfigurationInput) SetName ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetName(v string) *CreateNetworkAnalyzerConfigurationInput

SetName sets the Name field's value.

func (*CreateNetworkAnalyzerConfigurationInput) SetTags ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetTags(v []*Tag) *CreateNetworkAnalyzerConfigurationInput

SetTags sets the Tags field's value.

func (*CreateNetworkAnalyzerConfigurationInput) SetTraceContent ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetTraceContent(v *TraceContent) *CreateNetworkAnalyzerConfigurationInput

SetTraceContent sets the TraceContent field's value.

func (*CreateNetworkAnalyzerConfigurationInput) SetWirelessDevices ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetWirelessDevices(v []*string) *CreateNetworkAnalyzerConfigurationInput

SetWirelessDevices sets the WirelessDevices field's value.

func (*CreateNetworkAnalyzerConfigurationInput) SetWirelessGateways ¶

func (s *CreateNetworkAnalyzerConfigurationInput) SetWirelessGateways(v []*string) *CreateNetworkAnalyzerConfigurationInput

SetWirelessGateways sets the WirelessGateways field's value.

func (CreateNetworkAnalyzerConfigurationInput) String ¶

func (s CreateNetworkAnalyzerConfigurationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateNetworkAnalyzerConfigurationInput) Validate ¶

func (s *CreateNetworkAnalyzerConfigurationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateNetworkAnalyzerConfigurationOutput ¶

type CreateNetworkAnalyzerConfigurationOutput struct {

    // The Amazon Resource Name of the new resource.
    Arn *string `type:"string"`

    // Name of the network analyzer configuration.
    Name *string `min:"1" type:"string"`
    // contains filtered or unexported fields
}

func (CreateNetworkAnalyzerConfigurationOutput) GoString ¶

func (s CreateNetworkAnalyzerConfigurationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateNetworkAnalyzerConfigurationOutput) SetArn ¶

func (s *CreateNetworkAnalyzerConfigurationOutput) SetArn(v string) *CreateNetworkAnalyzerConfigurationOutput

SetArn sets the Arn field's value.

func (*CreateNetworkAnalyzerConfigurationOutput) SetName ¶

func (s *CreateNetworkAnalyzerConfigurationOutput) SetName(v string) *CreateNetworkAnalyzerConfigurationOutput

SetName sets the Name field's value.

func (CreateNetworkAnalyzerConfigurationOutput) String ¶

func (s CreateNetworkAnalyzerConfigurationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateServiceProfileInput ¶

type CreateServiceProfileInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The service profile information to use to create the service profile.
    LoRaWAN *LoRaWANServiceProfile `type:"structure"`

    // The name of the new resource.
    Name *string `type:"string"`

    // The tags to attach to the new service profile. Tags are metadata that you
    // can use to manage a resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (CreateServiceProfileInput) GoString ¶

func (s CreateServiceProfileInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateServiceProfileInput) SetClientRequestToken ¶

func (s *CreateServiceProfileInput) SetClientRequestToken(v string) *CreateServiceProfileInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateServiceProfileInput) SetLoRaWAN ¶

func (s *CreateServiceProfileInput) SetLoRaWAN(v *LoRaWANServiceProfile) *CreateServiceProfileInput

SetLoRaWAN sets the LoRaWAN field's value.

func (*CreateServiceProfileInput) SetName ¶

func (s *CreateServiceProfileInput) SetName(v string) *CreateServiceProfileInput

SetName sets the Name field's value.

func (*CreateServiceProfileInput) SetTags ¶

func (s *CreateServiceProfileInput) SetTags(v []*Tag) *CreateServiceProfileInput

SetTags sets the Tags field's value.

func (CreateServiceProfileInput) String ¶

func (s CreateServiceProfileInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateServiceProfileInput) Validate ¶

func (s *CreateServiceProfileInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateServiceProfileOutput ¶

type CreateServiceProfileOutput struct {

    // The Amazon Resource Name of the new resource.
    Arn *string `type:"string"`

    // The ID of the new service profile.
    Id *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateServiceProfileOutput) GoString ¶

func (s CreateServiceProfileOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateServiceProfileOutput) SetArn ¶

func (s *CreateServiceProfileOutput) SetArn(v string) *CreateServiceProfileOutput

SetArn sets the Arn field's value.

func (*CreateServiceProfileOutput) SetId ¶

func (s *CreateServiceProfileOutput) SetId(v string) *CreateServiceProfileOutput

SetId sets the Id field's value.

func (CreateServiceProfileOutput) String ¶

func (s CreateServiceProfileOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateWirelessDeviceInput ¶

type CreateWirelessDeviceInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The description of the new resource.
    Description *string `type:"string"`

    // The name of the destination to assign to the new wireless device.
    //
    // DestinationName is a required field
    DestinationName *string `type:"string" required:"true"`

    // The device configuration information to use to create the wireless device.
    LoRaWAN *LoRaWANDevice `type:"structure"`

    // The name of the new resource.
    Name *string `type:"string"`

    // FPort values for the GNSS, stream, and ClockSync functions of the positioning
    // information.
    Positioning *string `type:"string" enum:"PositioningConfigStatus"`

    // The device configuration information to use to create the Sidewalk device.
    Sidewalk *SidewalkCreateWirelessDevice `type:"structure"`

    // The tags to attach to the new wireless device. Tags are metadata that you
    // can use to manage a resource.
    Tags []*Tag `type:"list"`

    // The wireless device type.
    //
    // Type is a required field
    Type *string `type:"string" required:"true" enum:"WirelessDeviceType"`
    // contains filtered or unexported fields
}

func (CreateWirelessDeviceInput) GoString ¶

func (s CreateWirelessDeviceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessDeviceInput) SetClientRequestToken ¶

func (s *CreateWirelessDeviceInput) SetClientRequestToken(v string) *CreateWirelessDeviceInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateWirelessDeviceInput) SetDescription ¶

func (s *CreateWirelessDeviceInput) SetDescription(v string) *CreateWirelessDeviceInput

SetDescription sets the Description field's value.

func (*CreateWirelessDeviceInput) SetDestinationName ¶

func (s *CreateWirelessDeviceInput) SetDestinationName(v string) *CreateWirelessDeviceInput

SetDestinationName sets the DestinationName field's value.

func (*CreateWirelessDeviceInput) SetLoRaWAN ¶

func (s *CreateWirelessDeviceInput) SetLoRaWAN(v *LoRaWANDevice) *CreateWirelessDeviceInput

SetLoRaWAN sets the LoRaWAN field's value.

func (*CreateWirelessDeviceInput) SetName ¶

func (s *CreateWirelessDeviceInput) SetName(v string) *CreateWirelessDeviceInput

SetName sets the Name field's value.

func (*CreateWirelessDeviceInput) SetPositioning ¶

func (s *CreateWirelessDeviceInput) SetPositioning(v string) *CreateWirelessDeviceInput

SetPositioning sets the Positioning field's value.

func (*CreateWirelessDeviceInput) SetSidewalk ¶

func (s *CreateWirelessDeviceInput) SetSidewalk(v *SidewalkCreateWirelessDevice) *CreateWirelessDeviceInput

SetSidewalk sets the Sidewalk field's value.

func (*CreateWirelessDeviceInput) SetTags ¶

func (s *CreateWirelessDeviceInput) SetTags(v []*Tag) *CreateWirelessDeviceInput

SetTags sets the Tags field's value.

func (*CreateWirelessDeviceInput) SetType ¶

func (s *CreateWirelessDeviceInput) SetType(v string) *CreateWirelessDeviceInput

SetType sets the Type field's value.

func (CreateWirelessDeviceInput) String ¶

func (s CreateWirelessDeviceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessDeviceInput) Validate ¶

func (s *CreateWirelessDeviceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateWirelessDeviceOutput ¶

type CreateWirelessDeviceOutput struct {

    // The Amazon Resource Name of the new resource.
    Arn *string `type:"string"`

    // The ID of the new wireless device.
    Id *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateWirelessDeviceOutput) GoString ¶

func (s CreateWirelessDeviceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessDeviceOutput) SetArn ¶

func (s *CreateWirelessDeviceOutput) SetArn(v string) *CreateWirelessDeviceOutput

SetArn sets the Arn field's value.

func (*CreateWirelessDeviceOutput) SetId ¶

func (s *CreateWirelessDeviceOutput) SetId(v string) *CreateWirelessDeviceOutput

SetId sets the Id field's value.

func (CreateWirelessDeviceOutput) String ¶

func (s CreateWirelessDeviceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateWirelessGatewayInput ¶

type CreateWirelessGatewayInput struct {

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The description of the new resource.
    Description *string `type:"string"`

    // The gateway configuration information to use to create the wireless gateway.
    //
    // LoRaWAN is a required field
    LoRaWAN *LoRaWANGateway `type:"structure" required:"true"`

    // The name of the new resource.
    Name *string `type:"string"`

    // The tags to attach to the new wireless gateway. Tags are metadata that you
    // can use to manage a resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (CreateWirelessGatewayInput) GoString ¶

func (s CreateWirelessGatewayInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayInput) SetClientRequestToken ¶

func (s *CreateWirelessGatewayInput) SetClientRequestToken(v string) *CreateWirelessGatewayInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateWirelessGatewayInput) SetDescription ¶

func (s *CreateWirelessGatewayInput) SetDescription(v string) *CreateWirelessGatewayInput

SetDescription sets the Description field's value.

func (*CreateWirelessGatewayInput) SetLoRaWAN ¶

func (s *CreateWirelessGatewayInput) SetLoRaWAN(v *LoRaWANGateway) *CreateWirelessGatewayInput

SetLoRaWAN sets the LoRaWAN field's value.

func (*CreateWirelessGatewayInput) SetName ¶

func (s *CreateWirelessGatewayInput) SetName(v string) *CreateWirelessGatewayInput

SetName sets the Name field's value.

func (*CreateWirelessGatewayInput) SetTags ¶

func (s *CreateWirelessGatewayInput) SetTags(v []*Tag) *CreateWirelessGatewayInput

SetTags sets the Tags field's value.

func (CreateWirelessGatewayInput) String ¶

func (s CreateWirelessGatewayInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayInput) Validate ¶

func (s *CreateWirelessGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateWirelessGatewayOutput ¶

type CreateWirelessGatewayOutput struct {

    // The Amazon Resource Name of the new resource.
    Arn *string `type:"string"`

    // The ID of the new wireless gateway.
    Id *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateWirelessGatewayOutput) GoString ¶

func (s CreateWirelessGatewayOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayOutput) SetArn ¶

func (s *CreateWirelessGatewayOutput) SetArn(v string) *CreateWirelessGatewayOutput

SetArn sets the Arn field's value.

func (*CreateWirelessGatewayOutput) SetId ¶

func (s *CreateWirelessGatewayOutput) SetId(v string) *CreateWirelessGatewayOutput

SetId sets the Id field's value.

func (CreateWirelessGatewayOutput) String ¶

func (s CreateWirelessGatewayOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateWirelessGatewayTaskDefinitionInput ¶

type CreateWirelessGatewayTaskDefinitionInput struct {

    // Whether to automatically create tasks using this task definition for all
    // gateways with the specified current version. If false, the task must me created
    // by calling CreateWirelessGatewayTask.
    //
    // AutoCreateTasks is a required field
    AutoCreateTasks *bool `type:"boolean" required:"true"`

    // Each resource must have a unique client request token. The client token is
    // used to implement idempotency. It ensures that the request completes no more
    // than one time. If you retry a request with the same token and the same parameters,
    // the request will complete successfully. However, if you try to create a new
    // resource using the same token but different parameters, an HTTP 409 conflict
    // occurs. If you omit this value, AWS SDKs will automatically generate a unique
    // client request. For more information about idempotency, see Ensuring idempotency
    // in Amazon EC2 API requests (https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html).
    ClientRequestToken *string `min:"1" type:"string" idempotencyToken:"true"`

    // The name of the new resource.
    Name *string `min:"1" type:"string"`

    // The tags to attach to the specified resource. Tags are metadata that you
    // can use to manage a resource.
    Tags []*Tag `type:"list"`

    // Information about the gateways to update.
    Update *UpdateWirelessGatewayTaskCreate `type:"structure"`
    // contains filtered or unexported fields
}

func (CreateWirelessGatewayTaskDefinitionInput) GoString ¶

func (s CreateWirelessGatewayTaskDefinitionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayTaskDefinitionInput) SetAutoCreateTasks ¶

func (s *CreateWirelessGatewayTaskDefinitionInput) SetAutoCreateTasks(v bool) *CreateWirelessGatewayTaskDefinitionInput

SetAutoCreateTasks sets the AutoCreateTasks field's value.

func (*CreateWirelessGatewayTaskDefinitionInput) SetClientRequestToken ¶

func (s *CreateWirelessGatewayTaskDefinitionInput) SetClientRequestToken(v string) *CreateWirelessGatewayTaskDefinitionInput

SetClientRequestToken sets the ClientRequestToken field's value.

func (*CreateWirelessGatewayTaskDefinitionInput) SetName ¶

func (s *CreateWirelessGatewayTaskDefinitionInput) SetName(v string) *CreateWirelessGatewayTaskDefinitionInput

SetName sets the Name field's value.

func (*CreateWirelessGatewayTaskDefinitionInput) SetTags ¶

func (s *CreateWirelessGatewayTaskDefinitionInput) SetTags(v []*Tag) *CreateWirelessGatewayTaskDefinitionInput

SetTags sets the Tags field's value.

func (*CreateWirelessGatewayTaskDefinitionInput) SetUpdate ¶

func (s *CreateWirelessGatewayTaskDefinitionInput) SetUpdate(v *UpdateWirelessGatewayTaskCreate) *CreateWirelessGatewayTaskDefinitionInput

SetUpdate sets the Update field's value.

func (CreateWirelessGatewayTaskDefinitionInput) String ¶

func (s CreateWirelessGatewayTaskDefinitionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayTaskDefinitionInput) Validate ¶

func (s *CreateWirelessGatewayTaskDefinitionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateWirelessGatewayTaskDefinitionOutput ¶

type CreateWirelessGatewayTaskDefinitionOutput struct {

    // The Amazon Resource Name of the resource.
    Arn *string `type:"string"`

    // The ID of the new wireless gateway task definition.
    Id *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateWirelessGatewayTaskDefinitionOutput) GoString ¶

func (s CreateWirelessGatewayTaskDefinitionOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayTaskDefinitionOutput) SetArn ¶

func (s *CreateWirelessGatewayTaskDefinitionOutput) SetArn(v string) *CreateWirelessGatewayTaskDefinitionOutput

SetArn sets the Arn field's value.

func (*CreateWirelessGatewayTaskDefinitionOutput) SetId ¶

func (s *CreateWirelessGatewayTaskDefinitionOutput) SetId(v string) *CreateWirelessGatewayTaskDefinitionOutput

SetId sets the Id field's value.

func (CreateWirelessGatewayTaskDefinitionOutput) String ¶

func (s CreateWirelessGatewayTaskDefinitionOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateWirelessGatewayTaskInput ¶

type CreateWirelessGatewayTaskInput struct {

    // The ID of the resource to update.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the WirelessGatewayTaskDefinition.
    //
    // WirelessGatewayTaskDefinitionId is a required field
    WirelessGatewayTaskDefinitionId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CreateWirelessGatewayTaskInput) GoString ¶

func (s CreateWirelessGatewayTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayTaskInput) SetId ¶

func (s *CreateWirelessGatewayTaskInput) SetId(v string) *CreateWirelessGatewayTaskInput

SetId sets the Id field's value.

func (*CreateWirelessGatewayTaskInput) SetWirelessGatewayTaskDefinitionId ¶

func (s *CreateWirelessGatewayTaskInput) SetWirelessGatewayTaskDefinitionId(v string) *CreateWirelessGatewayTaskInput

SetWirelessGatewayTaskDefinitionId sets the WirelessGatewayTaskDefinitionId field's value.

func (CreateWirelessGatewayTaskInput) String ¶

func (s CreateWirelessGatewayTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayTaskInput) Validate ¶

func (s *CreateWirelessGatewayTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateWirelessGatewayTaskOutput ¶

type CreateWirelessGatewayTaskOutput struct {

    // The status of the request.
    Status *string `type:"string" enum:"WirelessGatewayTaskStatus"`

    // The ID of the WirelessGatewayTaskDefinition.
    WirelessGatewayTaskDefinitionId *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateWirelessGatewayTaskOutput) GoString ¶

func (s CreateWirelessGatewayTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateWirelessGatewayTaskOutput) SetStatus ¶

func (s *CreateWirelessGatewayTaskOutput) SetStatus(v string) *CreateWirelessGatewayTaskOutput

SetStatus sets the Status field's value.

func (*CreateWirelessGatewayTaskOutput) SetWirelessGatewayTaskDefinitionId ¶

func (s *CreateWirelessGatewayTaskOutput) SetWirelessGatewayTaskDefinitionId(v string) *CreateWirelessGatewayTaskOutput

SetWirelessGatewayTaskDefinitionId sets the WirelessGatewayTaskDefinitionId field's value.

func (CreateWirelessGatewayTaskOutput) String ¶

func (s CreateWirelessGatewayTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DakCertificateMetadata ¶

type DakCertificateMetadata struct {

    // The advertised product ID (APID) that's used for pre-production and production
    // applications.
    ApId *string `type:"string"`

    // The certificate ID for the DAK.
    //
    // CertificateId is a required field
    CertificateId *string `type:"string" required:"true"`

    // The device type ID that's used for prototyping applications.
    DeviceTypeId *string `type:"string"`

    // Whether factory support has been enabled.
    FactorySupport *bool `type:"boolean"`

    // The maximum number of signatures that the DAK can sign. A value of -1 indicates
    // that there's no device limit.
    MaxAllowedSignature *int64 `type:"integer"`
    // contains filtered or unexported fields
}

The device attestation key (DAK) information.

func (DakCertificateMetadata) GoString ¶

func (s DakCertificateMetadata) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DakCertificateMetadata) SetApId ¶

func (s *DakCertificateMetadata) SetApId(v string) *DakCertificateMetadata

SetApId sets the ApId field's value.

func (*DakCertificateMetadata) SetCertificateId ¶

func (s *DakCertificateMetadata) SetCertificateId(v string) *DakCertificateMetadata

SetCertificateId sets the CertificateId field's value.

func (*DakCertificateMetadata) SetDeviceTypeId ¶

func (s *DakCertificateMetadata) SetDeviceTypeId(v string) *DakCertificateMetadata

SetDeviceTypeId sets the DeviceTypeId field's value.

func (*DakCertificateMetadata) SetFactorySupport ¶

func (s *DakCertificateMetadata) SetFactorySupport(v bool) *DakCertificateMetadata

SetFactorySupport sets the FactorySupport field's value.

func (*DakCertificateMetadata) SetMaxAllowedSignature ¶

func (s *DakCertificateMetadata) SetMaxAllowedSignature(v int64) *DakCertificateMetadata

SetMaxAllowedSignature sets the MaxAllowedSignature field's value.

func (DakCertificateMetadata) String ¶

func (s DakCertificateMetadata) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteDestinationInput ¶

type DeleteDestinationInput struct {

    // The name of the resource to delete.
    //
    // Name is a required field
    Name *string `location:"uri" locationName:"Name" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteDestinationInput) GoString ¶

func (s DeleteDestinationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDestinationInput) SetName ¶

func (s *DeleteDestinationInput) SetName(v string) *DeleteDestinationInput

SetName sets the Name field's value.

func (DeleteDestinationInput) String ¶

func (s DeleteDestinationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDestinationInput) Validate ¶

func (s *DeleteDestinationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteDestinationOutput ¶

type DeleteDestinationOutput struct {
    // contains filtered or unexported fields
}

func (DeleteDestinationOutput) GoString ¶

func (s DeleteDestinationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteDestinationOutput) String ¶

func (s DeleteDestinationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteDeviceProfileInput ¶

type DeleteDeviceProfileInput struct {

    // The ID of the resource to delete.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteDeviceProfileInput) GoString ¶

func (s DeleteDeviceProfileInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDeviceProfileInput) SetId ¶

func (s *DeleteDeviceProfileInput) SetId(v string) *DeleteDeviceProfileInput

SetId sets the Id field's value.

func (DeleteDeviceProfileInput) String ¶

func (s DeleteDeviceProfileInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDeviceProfileInput) Validate ¶

func (s *DeleteDeviceProfileInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteDeviceProfileOutput ¶

type DeleteDeviceProfileOutput struct {
    // contains filtered or unexported fields
}

func (DeleteDeviceProfileOutput) GoString ¶

func (s DeleteDeviceProfileOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteDeviceProfileOutput) String ¶

func (s DeleteDeviceProfileOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteFuotaTaskInput ¶

type DeleteFuotaTaskInput struct {

    // The ID of a FUOTA task.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteFuotaTaskInput) GoString ¶

func (s DeleteFuotaTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteFuotaTaskInput) SetId ¶

func (s *DeleteFuotaTaskInput) SetId(v string) *DeleteFuotaTaskInput

SetId sets the Id field's value.

func (DeleteFuotaTaskInput) String ¶

func (s DeleteFuotaTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteFuotaTaskInput) Validate ¶

func (s *DeleteFuotaTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteFuotaTaskOutput ¶

type DeleteFuotaTaskOutput struct {
    // contains filtered or unexported fields
}

func (DeleteFuotaTaskOutput) GoString ¶

func (s DeleteFuotaTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteFuotaTaskOutput) String ¶

func (s DeleteFuotaTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteMulticastGroupInput ¶

type DeleteMulticastGroupInput struct {

    // The ID of the multicast group.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteMulticastGroupInput) GoString ¶

func (s DeleteMulticastGroupInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteMulticastGroupInput) SetId ¶

func (s *DeleteMulticastGroupInput) SetId(v string) *DeleteMulticastGroupInput

SetId sets the Id field's value.

func (DeleteMulticastGroupInput) String ¶

func (s DeleteMulticastGroupInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteMulticastGroupInput) Validate ¶

func (s *DeleteMulticastGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteMulticastGroupOutput ¶

type DeleteMulticastGroupOutput struct {
    // contains filtered or unexported fields
}

func (DeleteMulticastGroupOutput) GoString ¶

func (s DeleteMulticastGroupOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteMulticastGroupOutput) String ¶

func (s DeleteMulticastGroupOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteNetworkAnalyzerConfigurationInput ¶

type DeleteNetworkAnalyzerConfigurationInput struct {

    // Name of the network analyzer configuration.
    //
    // ConfigurationName is a required field
    ConfigurationName *string `location:"uri" locationName:"ConfigurationName" min:"1" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteNetworkAnalyzerConfigurationInput) GoString ¶

func (s DeleteNetworkAnalyzerConfigurationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteNetworkAnalyzerConfigurationInput) SetConfigurationName ¶

func (s *DeleteNetworkAnalyzerConfigurationInput) SetConfigurationName(v string) *DeleteNetworkAnalyzerConfigurationInput

SetConfigurationName sets the ConfigurationName field's value.

func (DeleteNetworkAnalyzerConfigurationInput) String ¶

func (s DeleteNetworkAnalyzerConfigurationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteNetworkAnalyzerConfigurationInput) Validate ¶

func (s *DeleteNetworkAnalyzerConfigurationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteNetworkAnalyzerConfigurationOutput ¶

type DeleteNetworkAnalyzerConfigurationOutput struct {
    // contains filtered or unexported fields
}

func (DeleteNetworkAnalyzerConfigurationOutput) GoString ¶

func (s DeleteNetworkAnalyzerConfigurationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteNetworkAnalyzerConfigurationOutput) String ¶

func (s DeleteNetworkAnalyzerConfigurationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteQueuedMessagesInput ¶

type DeleteQueuedMessagesInput struct {

    // The ID of a given wireless device for which downlink messages will be deleted.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // If message ID is "*", it cleares the entire downlink queue for a given device,
    // specified by the wireless device ID. Otherwise, the downlink message with
    // the specified message ID will be deleted.
    //
    // MessageId is a required field
    MessageId *string `location:"querystring" locationName:"messageId" type:"string" required:"true"`

    // The wireless device type, which can be either Sidewalk or LoRaWAN.
    WirelessDeviceType *string `location:"querystring" locationName:"WirelessDeviceType" type:"string" enum:"WirelessDeviceType"`
    // contains filtered or unexported fields
}

func (DeleteQueuedMessagesInput) GoString ¶

func (s DeleteQueuedMessagesInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteQueuedMessagesInput) SetId ¶

func (s *DeleteQueuedMessagesInput) SetId(v string) *DeleteQueuedMessagesInput

SetId sets the Id field's value.

func (*DeleteQueuedMessagesInput) SetMessageId ¶

func (s *DeleteQueuedMessagesInput) SetMessageId(v string) *DeleteQueuedMessagesInput

SetMessageId sets the MessageId field's value.

func (*DeleteQueuedMessagesInput) SetWirelessDeviceType ¶

func (s *DeleteQueuedMessagesInput) SetWirelessDeviceType(v string) *DeleteQueuedMessagesInput

SetWirelessDeviceType sets the WirelessDeviceType field's value.

func (DeleteQueuedMessagesInput) String ¶

func (s DeleteQueuedMessagesInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteQueuedMessagesInput) Validate ¶

func (s *DeleteQueuedMessagesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteQueuedMessagesOutput ¶

type DeleteQueuedMessagesOutput struct {
    // contains filtered or unexported fields
}

func (DeleteQueuedMessagesOutput) GoString ¶

func (s DeleteQueuedMessagesOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteQueuedMessagesOutput) String ¶

func (s DeleteQueuedMessagesOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteServiceProfileInput ¶

type DeleteServiceProfileInput struct {

    // The ID of the resource to delete.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteServiceProfileInput) GoString ¶

func (s DeleteServiceProfileInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteServiceProfileInput) SetId ¶

func (s *DeleteServiceProfileInput) SetId(v string) *DeleteServiceProfileInput

SetId sets the Id field's value.

func (DeleteServiceProfileInput) String ¶

func (s DeleteServiceProfileInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteServiceProfileInput) Validate ¶

func (s *DeleteServiceProfileInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteServiceProfileOutput ¶

type DeleteServiceProfileOutput struct {
    // contains filtered or unexported fields
}

func (DeleteServiceProfileOutput) GoString ¶

func (s DeleteServiceProfileOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteServiceProfileOutput) String ¶

func (s DeleteServiceProfileOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteWirelessDeviceImportTaskInput ¶

type DeleteWirelessDeviceImportTaskInput struct {

    // The unique identifier of the import task to be deleted.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteWirelessDeviceImportTaskInput) GoString ¶

func (s DeleteWirelessDeviceImportTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessDeviceImportTaskInput) SetId ¶

func (s *DeleteWirelessDeviceImportTaskInput) SetId(v string) *DeleteWirelessDeviceImportTaskInput

SetId sets the Id field's value.

func (DeleteWirelessDeviceImportTaskInput) String ¶

func (s DeleteWirelessDeviceImportTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessDeviceImportTaskInput) Validate ¶

func (s *DeleteWirelessDeviceImportTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteWirelessDeviceImportTaskOutput ¶

type DeleteWirelessDeviceImportTaskOutput struct {
    // contains filtered or unexported fields
}

func (DeleteWirelessDeviceImportTaskOutput) GoString ¶

func (s DeleteWirelessDeviceImportTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteWirelessDeviceImportTaskOutput) String ¶

func (s DeleteWirelessDeviceImportTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteWirelessDeviceInput ¶

type DeleteWirelessDeviceInput struct {

    // The ID of the resource to delete.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteWirelessDeviceInput) GoString ¶

func (s DeleteWirelessDeviceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessDeviceInput) SetId ¶

func (s *DeleteWirelessDeviceInput) SetId(v string) *DeleteWirelessDeviceInput

SetId sets the Id field's value.

func (DeleteWirelessDeviceInput) String ¶

func (s DeleteWirelessDeviceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessDeviceInput) Validate ¶

func (s *DeleteWirelessDeviceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteWirelessDeviceOutput ¶

type DeleteWirelessDeviceOutput struct {
    // contains filtered or unexported fields
}

func (DeleteWirelessDeviceOutput) GoString ¶

func (s DeleteWirelessDeviceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteWirelessDeviceOutput) String ¶

func (s DeleteWirelessDeviceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteWirelessGatewayInput ¶

type DeleteWirelessGatewayInput struct {

    // The ID of the resource to delete.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteWirelessGatewayInput) GoString ¶

func (s DeleteWirelessGatewayInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessGatewayInput) SetId ¶

func (s *DeleteWirelessGatewayInput) SetId(v string) *DeleteWirelessGatewayInput

SetId sets the Id field's value.

func (DeleteWirelessGatewayInput) String ¶

func (s DeleteWirelessGatewayInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessGatewayInput) Validate ¶

func (s *DeleteWirelessGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteWirelessGatewayOutput ¶

type DeleteWirelessGatewayOutput struct {
    // contains filtered or unexported fields
}

func (DeleteWirelessGatewayOutput) GoString ¶

func (s DeleteWirelessGatewayOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteWirelessGatewayOutput) String ¶

func (s DeleteWirelessGatewayOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteWirelessGatewayTaskDefinitionInput ¶

type DeleteWirelessGatewayTaskDefinitionInput struct {

    // The ID of the resource to delete.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteWirelessGatewayTaskDefinitionInput) GoString ¶

func (s DeleteWirelessGatewayTaskDefinitionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessGatewayTaskDefinitionInput) SetId ¶

func (s *DeleteWirelessGatewayTaskDefinitionInput) SetId(v string) *DeleteWirelessGatewayTaskDefinitionInput

SetId sets the Id field's value.

func (DeleteWirelessGatewayTaskDefinitionInput) String ¶

func (s DeleteWirelessGatewayTaskDefinitionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessGatewayTaskDefinitionInput) Validate ¶

func (s *DeleteWirelessGatewayTaskDefinitionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteWirelessGatewayTaskDefinitionOutput ¶

type DeleteWirelessGatewayTaskDefinitionOutput struct {
    // contains filtered or unexported fields
}

func (DeleteWirelessGatewayTaskDefinitionOutput) GoString ¶

func (s DeleteWirelessGatewayTaskDefinitionOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteWirelessGatewayTaskDefinitionOutput) String ¶

func (s DeleteWirelessGatewayTaskDefinitionOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteWirelessGatewayTaskInput ¶

type DeleteWirelessGatewayTaskInput struct {

    // The ID of the resource to delete.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteWirelessGatewayTaskInput) GoString ¶

func (s DeleteWirelessGatewayTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessGatewayTaskInput) SetId ¶

func (s *DeleteWirelessGatewayTaskInput) SetId(v string) *DeleteWirelessGatewayTaskInput

SetId sets the Id field's value.

func (DeleteWirelessGatewayTaskInput) String ¶

func (s DeleteWirelessGatewayTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteWirelessGatewayTaskInput) Validate ¶

func (s *DeleteWirelessGatewayTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteWirelessGatewayTaskOutput ¶

type DeleteWirelessGatewayTaskOutput struct {
    // contains filtered or unexported fields
}

func (DeleteWirelessGatewayTaskOutput) GoString ¶

func (s DeleteWirelessGatewayTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteWirelessGatewayTaskOutput) String ¶

func (s DeleteWirelessGatewayTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeregisterWirelessDeviceInput ¶

type DeregisterWirelessDeviceInput struct {

    // The identifier of the wireless device to deregister from AWS IoT Wireless.
    //
    // Identifier is a required field
    Identifier *string `location:"uri" locationName:"Identifier" type:"string" required:"true"`

    // The type of wireless device to deregister from AWS IoT Wireless, which can
    // be LoRaWAN or Sidewalk.
    WirelessDeviceType *string `location:"querystring" locationName:"WirelessDeviceType" type:"string" enum:"WirelessDeviceType"`
    // contains filtered or unexported fields
}

func (DeregisterWirelessDeviceInput) GoString ¶

func (s DeregisterWirelessDeviceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeregisterWirelessDeviceInput) SetIdentifier ¶

func (s *DeregisterWirelessDeviceInput) SetIdentifier(v string) *DeregisterWirelessDeviceInput

SetIdentifier sets the Identifier field's value.

func (*DeregisterWirelessDeviceInput) SetWirelessDeviceType ¶

func (s *DeregisterWirelessDeviceInput) SetWirelessDeviceType(v string) *DeregisterWirelessDeviceInput

SetWirelessDeviceType sets the WirelessDeviceType field's value.

func (DeregisterWirelessDeviceInput) String ¶

func (s DeregisterWirelessDeviceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeregisterWirelessDeviceInput) Validate ¶

func (s *DeregisterWirelessDeviceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeregisterWirelessDeviceOutput ¶

type DeregisterWirelessDeviceOutput struct {
    // contains filtered or unexported fields
}

func (DeregisterWirelessDeviceOutput) GoString ¶

func (s DeregisterWirelessDeviceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeregisterWirelessDeviceOutput) String ¶

func (s DeregisterWirelessDeviceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type Destinations ¶

type Destinations struct {

    // The Amazon Resource Name of the resource.
    Arn *string `type:"string"`

    // The description of the resource.
    Description *string `type:"string"`

    // The rule name or topic rule to send messages to.
    Expression *string `type:"string"`

    // The type of value in Expression.
    ExpressionType *string `type:"string" enum:"ExpressionType"`

    // The name of the resource.
    Name *string `type:"string"`

    // The ARN of the IAM Role that authorizes the destination.
    RoleArn *string `min:"20" type:"string"`
    // contains filtered or unexported fields
}

Describes a destination.

func (Destinations) GoString ¶

func (s Destinations) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Destinations) SetArn ¶

func (s *Destinations) SetArn(v string) *Destinations

SetArn sets the Arn field's value.

func (*Destinations) SetDescription ¶

func (s *Destinations) SetDescription(v string) *Destinations

SetDescription sets the Description field's value.

func (*Destinations) SetExpression ¶

func (s *Destinations) SetExpression(v string) *Destinations

SetExpression sets the Expression field's value.

func (*Destinations) SetExpressionType ¶

func (s *Destinations) SetExpressionType(v string) *Destinations

SetExpressionType sets the ExpressionType field's value.

func (*Destinations) SetName ¶

func (s *Destinations) SetName(v string) *Destinations

SetName sets the Name field's value.

func (*Destinations) SetRoleArn ¶

func (s *Destinations) SetRoleArn(v string) *Destinations

SetRoleArn sets the RoleArn field's value.

func (Destinations) String ¶

func (s Destinations) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeviceProfile ¶

type DeviceProfile struct {

    // The Amazon Resource Name of the resource.
    Arn *string `type:"string"`

    // The ID of the device profile.
    Id *string `type:"string"`

    // The name of the resource.
    Name *string `type:"string"`
    // contains filtered or unexported fields
}

Describes a device profile.

func (DeviceProfile) GoString ¶

func (s DeviceProfile) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeviceProfile) SetArn ¶

func (s *DeviceProfile) SetArn(v string) *DeviceProfile

SetArn sets the Arn field's value.

func (*DeviceProfile) SetId ¶

func (s *DeviceProfile) SetId(v string) *DeviceProfile

SetId sets the Id field's value.

func (*DeviceProfile) SetName ¶

func (s *DeviceProfile) SetName(v string) *DeviceProfile

SetName sets the Name field's value.

func (DeviceProfile) String ¶

func (s DeviceProfile) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeviceRegistrationStateEventConfiguration ¶

type DeviceRegistrationStateEventConfiguration struct {

    // Device registration state event configuration object for enabling or disabling
    // Sidewalk related event topics.
    Sidewalk *SidewalkEventNotificationConfigurations `type:"structure"`

    // Denotes whether the wireless device ID device registration state event topic
    // is enabled or disabled.
    WirelessDeviceIdEventTopic *string `type:"string" enum:"EventNotificationTopicStatus"`
    // contains filtered or unexported fields
}

Device registration state event configuration object for enabling and disabling relevant topics.

func (DeviceRegistrationStateEventConfiguration) GoString ¶

func (s DeviceRegistrationStateEventConfiguration) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeviceRegistrationStateEventConfiguration) SetSidewalk ¶

func (s *DeviceRegistrationStateEventConfiguration) SetSidewalk(v *SidewalkEventNotificationConfigurations) *DeviceRegistrationStateEventConfiguration

SetSidewalk sets the Sidewalk field's value.

func (*DeviceRegistrationStateEventConfiguration) SetWirelessDeviceIdEventTopic ¶

func (s *DeviceRegistrationStateEventConfiguration) SetWirelessDeviceIdEventTopic(v string) *DeviceRegistrationStateEventConfiguration

SetWirelessDeviceIdEventTopic sets the WirelessDeviceIdEventTopic field's value.

func (DeviceRegistrationStateEventConfiguration) String ¶

func (s DeviceRegistrationStateEventConfiguration) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeviceRegistrationStateResourceTypeEventConfiguration ¶

type DeviceRegistrationStateResourceTypeEventConfiguration struct {

    // Device registration resource type state event configuration object for enabling
    // or disabling Sidewalk related event topics.
    Sidewalk *SidewalkResourceTypeEventConfiguration `type:"structure"`
    // contains filtered or unexported fields
}

Device registration state resource type event configuration object for enabling or disabling topic.

func (DeviceRegistrationStateResourceTypeEventConfiguration) GoString ¶

func (s DeviceRegistrationStateResourceTypeEventConfiguration) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeviceRegistrationStateResourceTypeEventConfiguration) SetSidewalk ¶

func (s *DeviceRegistrationStateResourceTypeEventConfiguration) SetSidewalk(v *SidewalkResourceTypeEventConfiguration) *DeviceRegistrationStateResourceTypeEventConfiguration

SetSidewalk sets the Sidewalk field's value.

func (DeviceRegistrationStateResourceTypeEventConfiguration) String ¶

func (s DeviceRegistrationStateResourceTypeEventConfiguration) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type Dimension ¶

type Dimension struct {

    // The name of the dimension.
    Name *string `locationName:"name" type:"string" enum:"DimensionName"`

    // The dimension's value.
    Value *string `locationName:"value" type:"string"`
    // contains filtered or unexported fields
}

The required list of dimensions for the metric.

func (Dimension) GoString ¶

func (s Dimension) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Dimension) SetName ¶

func (s *Dimension) SetName(v string) *Dimension

SetName sets the Name field's value.

func (*Dimension) SetValue ¶

func (s *Dimension) SetValue(v string) *Dimension

SetValue sets the Value field's value.

func (Dimension) String ¶

func (s Dimension) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DisassociateAwsAccountFromPartnerAccountInput ¶

type DisassociateAwsAccountFromPartnerAccountInput struct {

    // The partner account ID to disassociate from the AWS account.
    //
    // PartnerAccountId is a required field
    PartnerAccountId *string `location:"uri" locationName:"PartnerAccountId" type:"string" required:"true"`

    // The partner type.
    //
    // PartnerType is a required field
    PartnerType *string `location:"querystring" locationName:"partnerType" type:"string" required:"true" enum:"PartnerType"`
    // contains filtered or unexported fields
}

func (DisassociateAwsAccountFromPartnerAccountInput) GoString ¶

func (s DisassociateAwsAccountFromPartnerAccountInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateAwsAccountFromPartnerAccountInput) SetPartnerAccountId ¶

func (s *DisassociateAwsAccountFromPartnerAccountInput) SetPartnerAccountId(v string) *DisassociateAwsAccountFromPartnerAccountInput

SetPartnerAccountId sets the PartnerAccountId field's value.

func (*DisassociateAwsAccountFromPartnerAccountInput) SetPartnerType ¶

func (s *DisassociateAwsAccountFromPartnerAccountInput) SetPartnerType(v string) *DisassociateAwsAccountFromPartnerAccountInput

SetPartnerType sets the PartnerType field's value.

func (DisassociateAwsAccountFromPartnerAccountInput) String ¶

func (s DisassociateAwsAccountFromPartnerAccountInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateAwsAccountFromPartnerAccountInput) Validate ¶

func (s *DisassociateAwsAccountFromPartnerAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateAwsAccountFromPartnerAccountOutput ¶

type DisassociateAwsAccountFromPartnerAccountOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateAwsAccountFromPartnerAccountOutput) GoString ¶

func (s DisassociateAwsAccountFromPartnerAccountOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DisassociateAwsAccountFromPartnerAccountOutput) String ¶

func (s DisassociateAwsAccountFromPartnerAccountOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DisassociateMulticastGroupFromFuotaTaskInput ¶

type DisassociateMulticastGroupFromFuotaTaskInput struct {

    // The ID of a FUOTA task.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the multicast group.
    //
    // MulticastGroupId is a required field
    MulticastGroupId *string `location:"uri" locationName:"MulticastGroupId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisassociateMulticastGroupFromFuotaTaskInput) GoString ¶

func (s DisassociateMulticastGroupFromFuotaTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateMulticastGroupFromFuotaTaskInput) SetId ¶

func (s *DisassociateMulticastGroupFromFuotaTaskInput) SetId(v string) *DisassociateMulticastGroupFromFuotaTaskInput

SetId sets the Id field's value.

func (*DisassociateMulticastGroupFromFuotaTaskInput) SetMulticastGroupId ¶

func (s *DisassociateMulticastGroupFromFuotaTaskInput) SetMulticastGroupId(v string) *DisassociateMulticastGroupFromFuotaTaskInput

SetMulticastGroupId sets the MulticastGroupId field's value.

func (DisassociateMulticastGroupFromFuotaTaskInput) String ¶

func (s DisassociateMulticastGroupFromFuotaTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateMulticastGroupFromFuotaTaskInput) Validate ¶

func (s *DisassociateMulticastGroupFromFuotaTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateMulticastGroupFromFuotaTaskOutput ¶

type DisassociateMulticastGroupFromFuotaTaskOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateMulticastGroupFromFuotaTaskOutput) GoString ¶

func (s DisassociateMulticastGroupFromFuotaTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DisassociateMulticastGroupFromFuotaTaskOutput) String ¶

func (s DisassociateMulticastGroupFromFuotaTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DisassociateWirelessDeviceFromFuotaTaskInput ¶

type DisassociateWirelessDeviceFromFuotaTaskInput struct {

    // The ID of a FUOTA task.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the wireless device.
    //
    // WirelessDeviceId is a required field
    WirelessDeviceId *string `location:"uri" locationName:"WirelessDeviceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisassociateWirelessDeviceFromFuotaTaskInput) GoString ¶

func (s DisassociateWirelessDeviceFromFuotaTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessDeviceFromFuotaTaskInput) SetId ¶

func (s *DisassociateWirelessDeviceFromFuotaTaskInput) SetId(v string) *DisassociateWirelessDeviceFromFuotaTaskInput

SetId sets the Id field's value.

func (*DisassociateWirelessDeviceFromFuotaTaskInput) SetWirelessDeviceId ¶

func (s *DisassociateWirelessDeviceFromFuotaTaskInput) SetWirelessDeviceId(v string) *DisassociateWirelessDeviceFromFuotaTaskInput

SetWirelessDeviceId sets the WirelessDeviceId field's value.

func (DisassociateWirelessDeviceFromFuotaTaskInput) String ¶

func (s DisassociateWirelessDeviceFromFuotaTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessDeviceFromFuotaTaskInput) Validate ¶

func (s *DisassociateWirelessDeviceFromFuotaTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateWirelessDeviceFromFuotaTaskOutput ¶

type DisassociateWirelessDeviceFromFuotaTaskOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateWirelessDeviceFromFuotaTaskOutput) GoString ¶

func (s DisassociateWirelessDeviceFromFuotaTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DisassociateWirelessDeviceFromFuotaTaskOutput) String ¶

func (s DisassociateWirelessDeviceFromFuotaTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DisassociateWirelessDeviceFromMulticastGroupInput ¶

type DisassociateWirelessDeviceFromMulticastGroupInput struct {

    // The ID of the multicast group.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

    // The ID of the wireless device.
    //
    // WirelessDeviceId is a required field
    WirelessDeviceId *string `location:"uri" locationName:"WirelessDeviceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisassociateWirelessDeviceFromMulticastGroupInput) GoString ¶

func (s DisassociateWirelessDeviceFromMulticastGroupInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessDeviceFromMulticastGroupInput) SetId ¶

func (s *DisassociateWirelessDeviceFromMulticastGroupInput) SetId(v string) *DisassociateWirelessDeviceFromMulticastGroupInput

SetId sets the Id field's value.

func (*DisassociateWirelessDeviceFromMulticastGroupInput) SetWirelessDeviceId ¶

func (s *DisassociateWirelessDeviceFromMulticastGroupInput) SetWirelessDeviceId(v string) *DisassociateWirelessDeviceFromMulticastGroupInput

SetWirelessDeviceId sets the WirelessDeviceId field's value.

func (DisassociateWirelessDeviceFromMulticastGroupInput) String ¶

func (s DisassociateWirelessDeviceFromMulticastGroupInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessDeviceFromMulticastGroupInput) Validate ¶

func (s *DisassociateWirelessDeviceFromMulticastGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateWirelessDeviceFromMulticastGroupOutput ¶

type DisassociateWirelessDeviceFromMulticastGroupOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateWirelessDeviceFromMulticastGroupOutput) GoString ¶

func (s DisassociateWirelessDeviceFromMulticastGroupOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DisassociateWirelessDeviceFromMulticastGroupOutput) String ¶

func (s DisassociateWirelessDeviceFromMulticastGroupOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DisassociateWirelessDeviceFromThingInput ¶

type DisassociateWirelessDeviceFromThingInput struct {

    // The ID of the resource to update.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisassociateWirelessDeviceFromThingInput) GoString ¶

func (s DisassociateWirelessDeviceFromThingInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessDeviceFromThingInput) SetId ¶

func (s *DisassociateWirelessDeviceFromThingInput) SetId(v string) *DisassociateWirelessDeviceFromThingInput

SetId sets the Id field's value.

func (DisassociateWirelessDeviceFromThingInput) String ¶

func (s DisassociateWirelessDeviceFromThingInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessDeviceFromThingInput) Validate ¶

func (s *DisassociateWirelessDeviceFromThingInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateWirelessDeviceFromThingOutput ¶

type DisassociateWirelessDeviceFromThingOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateWirelessDeviceFromThingOutput) GoString ¶

func (s DisassociateWirelessDeviceFromThingOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DisassociateWirelessDeviceFromThingOutput) String ¶

func (s DisassociateWirelessDeviceFromThingOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DisassociateWirelessGatewayFromCertificateInput ¶

type DisassociateWirelessGatewayFromCertificateInput struct {

    // The ID of the resource to update.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisassociateWirelessGatewayFromCertificateInput) GoString ¶

func (s DisassociateWirelessGatewayFromCertificateInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessGatewayFromCertificateInput) SetId ¶

func (s *DisassociateWirelessGatewayFromCertificateInput) SetId(v string) *DisassociateWirelessGatewayFromCertificateInput

SetId sets the Id field's value.

func (DisassociateWirelessGatewayFromCertificateInput) String ¶

func (s DisassociateWirelessGatewayFromCertificateInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessGatewayFromCertificateInput) Validate ¶

func (s *DisassociateWirelessGatewayFromCertificateInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateWirelessGatewayFromCertificateOutput ¶

type DisassociateWirelessGatewayFromCertificateOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateWirelessGatewayFromCertificateOutput) GoString ¶

func (s DisassociateWirelessGatewayFromCertificateOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DisassociateWirelessGatewayFromCertificateOutput) String ¶

func (s DisassociateWirelessGatewayFromCertificateOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DisassociateWirelessGatewayFromThingInput ¶

type DisassociateWirelessGatewayFromThingInput struct {

    // The ID of the resource to update.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisassociateWirelessGatewayFromThingInput) GoString ¶

func (s DisassociateWirelessGatewayFromThingInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessGatewayFromThingInput) SetId ¶

func (s *DisassociateWirelessGatewayFromThingInput) SetId(v string) *DisassociateWirelessGatewayFromThingInput

SetId sets the Id field's value.

func (DisassociateWirelessGatewayFromThingInput) String ¶

func (s DisassociateWirelessGatewayFromThingInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DisassociateWirelessGatewayFromThingInput) Validate ¶

func (s *DisassociateWirelessGatewayFromThingInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateWirelessGatewayFromThingOutput ¶

type DisassociateWirelessGatewayFromThingOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateWirelessGatewayFromThingOutput) GoString ¶

func (s DisassociateWirelessGatewayFromThingOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DisassociateWirelessGatewayFromThingOutput) String ¶

func (s DisassociateWirelessGatewayFromThingOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DownlinkQueueMessage ¶

type DownlinkQueueMessage struct {

    // LoRaWAN router info.
    LoRaWAN *LoRaWANSendDataToDevice `type:"structure"`

    // The message ID assigned by IoT Wireless to each downlink message, which helps
    // identify the message.
    MessageId *string `type:"string"`

    // The time at which Iot Wireless received the downlink message.
    ReceivedAt *string `type:"string"`

    // The transmit mode to use for sending data to the wireless device. This can
    // be 0 for UM (unacknowledge mode) or 1 for AM (acknowledge mode).
    TransmitMode *int64 `type:"integer"`
    // contains filtered or unexported fields
}

The message in the downlink queue.

func (DownlinkQueueMessage) GoString ¶

func (s DownlinkQueueMessage) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DownlinkQueueMessage) SetLoRaWAN ¶

func (s *DownlinkQueueMessage) SetLoRaWAN(v *LoRaWANSendDataToDevice) *DownlinkQueueMessage

SetLoRaWAN sets the LoRaWAN field's value.

func (*DownlinkQueueMessage) SetMessageId ¶

func (s *DownlinkQueueMessage) SetMessageId(v string) *DownlinkQueueMessage

SetMessageId sets the MessageId field's value.

func (*DownlinkQueueMessage) SetReceivedAt ¶

func (s *DownlinkQueueMessage) SetReceivedAt(v string) *DownlinkQueueMessage

SetReceivedAt sets the ReceivedAt field's value.

func (*DownlinkQueueMessage) SetTransmitMode ¶

func (s *DownlinkQueueMessage) SetTransmitMode(v int64) *DownlinkQueueMessage

SetTransmitMode sets the TransmitMode field's value.

func (DownlinkQueueMessage) String ¶

func (s DownlinkQueueMessage) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type EventConfigurationItem ¶

type EventConfigurationItem struct {

    // Object of all event configurations and the status of the event topics.
    Events *EventNotificationItemConfigurations `type:"structure"`

    // Resource identifier opted in for event messaging.
    Identifier *string `type:"string"`

    // Identifier type of the particular resource identifier for event configuration.
    IdentifierType *string `type:"string" enum:"IdentifierType"`

    // Partner type of the resource if the identifier type is PartnerAccountId.
    PartnerType *string `type:"string" enum:"EventNotificationPartnerType"`
    // contains filtered or unexported fields
}

Event configuration object for a single resource.

func (EventConfigurationItem) GoString ¶

func (s EventConfigurationItem) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*EventConfigurationItem) SetEvents ¶

func (s *EventConfigurationItem) SetEvents(v *EventNotificationItemConfigurations) *EventConfigurationItem

SetEvents sets the Events field's value.

func (*EventConfigurationItem) SetIdentifier ¶

func (s *EventConfigurationItem) SetIdentifier(v string) *EventConfigurationItem

SetIdentifier sets the Identifier field's value.

func (*EventConfigurationItem) SetIdentifierType ¶

func (s *EventConfigurationItem) SetIdentifierType(v string) *EventConfigurationItem

SetIdentifierType sets the IdentifierType field's value.

func (*EventConfigurationItem) SetPartnerType ¶

func (s *EventConfigurationItem) SetPartnerType(v string) *EventConfigurationItem

SetPartnerType sets the PartnerType field's value.

func (EventConfigurationItem) String ¶

func (s EventConfigurationItem) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type EventNotificationItemConfigurations ¶

type EventNotificationItemConfigurations struct {

    // Connection status event configuration for an event configuration item.
    ConnectionStatus *ConnectionStatusEventConfiguration `type:"structure"`

    // Device registration state event configuration for an event configuration
    // item.
    DeviceRegistrationState *DeviceRegistrationStateEventConfiguration `type:"structure"`

    // Join event configuration for an event configuration item.
    Join *JoinEventConfiguration `type:"structure"`

    // Message delivery status event configuration for an event configuration item.
    MessageDeliveryStatus *MessageDeliveryStatusEventConfiguration `type:"structure"`

    // Proximity event configuration for an event configuration item.
    Proximity *ProximityEventConfiguration `type:"structure"`
    // contains filtered or unexported fields
}

Object of all event configurations and the status of the event topics.

func (EventNotificationItemConfigurations) GoString ¶

func (s EventNotificationItemConfigurations) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*EventNotificationItemConfigurations) SetConnectionStatus ¶

func (s *EventNotificationItemConfigurations) SetConnectionStatus(v *ConnectionStatusEventConfiguration) *EventNotificationItemConfigurations

SetConnectionStatus sets the ConnectionStatus field's value.

func (*EventNotificationItemConfigurations) SetDeviceRegistrationState ¶

func (s *EventNotificationItemConfigurations) SetDeviceRegistrationState(v *DeviceRegistrationStateEventConfiguration) *EventNotificationItemConfigurations

SetDeviceRegistrationState sets the DeviceRegistrationState field's value.

func (*EventNotificationItemConfigurations) SetJoin ¶

func (s *EventNotificationItemConfigurations) SetJoin(v *JoinEventConfiguration) *EventNotificationItemConfigurations

SetJoin sets the Join field's value.

func (*EventNotificationItemConfigurations) SetMessageDeliveryStatus ¶

func (s *EventNotificationItemConfigurations) SetMessageDeliveryStatus(v *MessageDeliveryStatusEventConfiguration) *EventNotificationItemConfigurations

SetMessageDeliveryStatus sets the MessageDeliveryStatus field's value.

func (*EventNotificationItemConfigurations) SetProximity ¶

func (s *EventNotificationItemConfigurations) SetProximity(v *ProximityEventConfiguration) *EventNotificationItemConfigurations

SetProximity sets the Proximity field's value.

func (EventNotificationItemConfigurations) String ¶

func (s EventNotificationItemConfigurations) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type FPorts ¶

type FPorts struct {

    // Optional LoRaWAN application information, which can be used for geolocation.
    Applications []*ApplicationConfig `type:"list"`

    // The Fport value.
    ClockSync *int64 `min:"1" type:"integer"`

    // The Fport value.
    Fuota *int64 `min:"1" type:"integer"`

    // The Fport value.
    Multicast *int64 `min:"1" type:"integer"`

    // FPort values for the GNSS, stream, and ClockSync functions of the positioning
    // information.
    Positioning *Positioning `type:"structure"`
    // contains filtered or unexported fields
}

List of FPort assigned for different LoRaWAN application packages to use

func (FPorts) GoString ¶

func (s FPorts) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*FPorts) SetApplications ¶

func (s *FPorts) SetApplications(v []*ApplicationConfig) *FPorts

SetApplications sets the Applications field's value.

func (*FPorts) SetClockSync ¶

func (s *FPorts) SetClockSync(v int64) *FPorts

SetClockSync sets the ClockSync field's value.

func (*FPorts) SetFuota ¶

func (s *FPorts) SetFuota(v int64) *FPorts

SetFuota sets the Fuota field's value.

func (*FPorts) SetMulticast ¶

func (s *FPorts) SetMulticast(v int64) *FPorts

SetMulticast sets the Multicast field's value.

func (*FPorts) SetPositioning ¶

func (s *FPorts) SetPositioning(v *Positioning) *FPorts

SetPositioning sets the Positioning field's value.

func (FPorts) String ¶

func (s FPorts) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*FPorts) Validate ¶

func (s *FPorts) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type FuotaTask ¶

type FuotaTask struct {

    // The arn of a FUOTA task.
    Arn *string `type:"string"`

    // The ID of a FUOTA task.
    Id *string `type:"string"`

    // The name of a FUOTA task.
    Name *string `type:"string"`
    // contains filtered or unexported fields
}

A FUOTA task.

func (FuotaTask) GoString ¶

func (s FuotaTask) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*FuotaTask) SetArn ¶

func (s *FuotaTask) SetArn(v string) *FuotaTask

SetArn sets the Arn field's value.

func (*FuotaTask) SetId ¶

func (s *FuotaTask) SetId(v string) *FuotaTask

SetId sets the Id field's value.

func (*FuotaTask) SetName ¶

func (s *FuotaTask) SetName(v string) *FuotaTask

SetName sets the Name field's value.

func (FuotaTask) String ¶

func (s FuotaTask) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GatewayListItem ¶

type GatewayListItem struct {

    // The frequency to use for the gateways when sending a downlink message to
    // the wireless device.
    //
    // DownlinkFrequency is a required field
    DownlinkFrequency *int64 `min:"1e+08" type:"integer" required:"true"`

    // The ID of the wireless gateways that you want to add to the list of gateways
    // when sending downlink messages.
    //
    // GatewayId is a required field
    GatewayId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

Gateway list item object that specifies the frequency and list of gateways for which the downlink message should be sent.

func (GatewayListItem) GoString ¶

func (s GatewayListItem) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GatewayListItem) SetDownlinkFrequency ¶

func (s *GatewayListItem) SetDownlinkFrequency(v int64) *GatewayListItem

SetDownlinkFrequency sets the DownlinkFrequency field's value.

func (*GatewayListItem) SetGatewayId ¶

func (s *GatewayListItem) SetGatewayId(v string) *GatewayListItem

SetGatewayId sets the GatewayId field's value.

func (GatewayListItem) String ¶

func (s GatewayListItem) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GatewayListItem) Validate ¶

func (s *GatewayListItem) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetDestinationInput ¶

type GetDestinationInput struct {

    // The name of the resource to get.
    //
    // Name is a required field
    Name *string `location:"uri" locationName:"Name" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (GetDestinationInput) GoString ¶

func (s GetDestinationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDestinationInput) SetName ¶

func (s *GetDestinationInput) SetName(v string) *GetDestinationInput

SetName sets the Name field's value.

func (GetDestinationInput) String ¶

func (s GetDestinationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDestinationInput) Validate ¶

func (s *GetDestinationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetDestinationOutput ¶

type GetDestinationOutput struct {

    // The Amazon Resource Name of the resource.
    Arn *string `type:"string"`

    // The description of the resource.
    Description *string `type:"string"`

    // The rule name or topic rule to send messages to.
    Expression *string `type:"string"`

    // The type of value in Expression.
    ExpressionType *string `type:"string" enum:"ExpressionType"`

    // The name of the resource.
    Name *string `type:"string"`

    // The ARN of the IAM Role that authorizes the destination.
    RoleArn *string `min:"20" type:"string"`
    // contains filtered or unexported fields
}

func (GetDestinationOutput) GoString ¶

func (s GetDestinationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDestinationOutput) SetArn ¶

func (s *GetDestinationOutput) SetArn(v string) *GetDestinationOutput

SetArn sets the Arn field's value.

func (*GetDestinationOutput) SetDescription ¶

func (s *GetDestinationOutput) SetDescription(v string) *GetDestinationOutput

SetDescription sets the Description field's value.

func (*GetDestinationOutput) SetExpression ¶

func (s *GetDestinationOutput) SetExpression(v string) *GetDestinationOutput

SetExpression sets the Expression field's value.

func (*GetDestinationOutput) SetExpressionType ¶

func (s *GetDestinationOutput) SetExpressionType(v string) *GetDestinationOutput

SetExpressionType sets the ExpressionType field's value.

func (*GetDestinationOutput) SetName ¶

func (s *GetDestinationOutput) SetName(v string) *GetDestinationOutput

SetName sets the Name field's value.

func (*GetDestinationOutput) SetRoleArn ¶

func (s *GetDestinationOutput) SetRoleArn(v string) *GetDestinationOutput

SetRoleArn sets the RoleArn field's value.

func (GetDestinationOutput) String ¶

func (s GetDestinationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetDeviceProfileInput ¶

type GetDeviceProfileInput struct {

    // The ID of the resource to get.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (GetDeviceProfileInput) GoString ¶

func (s GetDeviceProfileInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDeviceProfileInput) SetId ¶

func (s *GetDeviceProfileInput) SetId(v string) *GetDeviceProfileInput

SetId sets the Id field's value.

func (GetDeviceProfileInput) String ¶

func (s GetDeviceProfileInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDeviceProfileInput) Validate ¶

func (s *GetDeviceProfileInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetDeviceProfileOutput ¶

type GetDeviceProfileOutput struct {

    // The Amazon Resource Name of the resource.
    Arn *string `type:"string"`

    // The ID of the device profile.
    Id *string `type:"string"`

    // Information about the device profile.
    LoRaWAN *LoRaWANDeviceProfile `type:"structure"`

    // The name of the resource.
    Name *string `type:"string"`

    // Information about the Sidewalk parameters in the device profile.
    Sidewalk *SidewalkGetDeviceProfile `type:"structure"`
    // contains filtered or unexported fields
}

func (GetDeviceProfileOutput) GoString ¶

func (s GetDeviceProfileOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDeviceProfileOutput) SetArn ¶

func (s *GetDeviceProfileOutput) SetArn(v string) *GetDeviceProfileOutput

SetArn sets the Arn field's value.

func (*GetDeviceProfileOutput) SetId ¶

func (s *GetDeviceProfileOutput) SetId(v string) *GetDeviceProfileOutput

SetId sets the Id field's value.

func (*GetDeviceProfileOutput) SetLoRaWAN ¶

func (s *GetDeviceProfileOutput) SetLoRaWAN(v *LoRaWANDeviceProfile) *GetDeviceProfileOutput

SetLoRaWAN sets the LoRaWAN field's value.

func (*GetDeviceProfileOutput) SetName ¶

func (s *GetDeviceProfileOutput) SetName(v string) *GetDeviceProfileOutput

SetName sets the Name field's value.

func (*GetDeviceProfileOutput) SetSidewalk ¶

func (s *GetDeviceProfileOutput) SetSidewalk(v *SidewalkGetDeviceProfile) *GetDeviceProfileOutput

SetSidewalk sets the Sidewalk field's value.

func (GetDeviceProfileOutput) String ¶

func (s GetDeviceProfileOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetEventConfigurationByResourceTypesInput ¶

type GetEventConfigurationByResourceTypesInput struct {
    // contains filtered or unexported fields
}

func (GetEventConfigurationByResourceTypesInput) GoString ¶

func (s GetEventConfigurationByResourceTypesInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (GetEventConfigurationByResourceTypesInput) String ¶

func (s GetEventConfigurationByResourceTypesInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetEventConfigurationByResourceTypesOutput ¶

type GetEventConfigurationByResourceTypesOutput struct {

    // Resource type event configuration for the connection status event.
    ConnectionStatus *ConnectionStatusResourceTypeEventConfiguration `type:"structure"`

    // Resource type event configuration for the device registration state event.
    DeviceRegistrationState *DeviceRegistrationStateResourceTypeEventConfiguration `type:"structure"`

    // Resource type event configuration for the join event.
    Join *JoinResourceTypeEventConfiguration `type:"structure"`

    // Resource type event configuration object for the message delivery status
    // event.
    MessageDeliveryStatus *MessageDeliveryStatusResourceTypeEventConfiguration `type:"structure"`

    // Resource type event configuration for the proximity event.
    Proximity *ProximityResourceTypeEventConfiguration `type:"structure"`
    // contains filtered or unexported fields
}

func (GetEventConfigurationByResourceTypesOutput) GoString ¶

func (s GetEventConfigurationByResourceTypesOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetEventConfigurationByResourceTypesOutput) SetConnectionStatus ¶

func (s *GetEventConfigurationByResourceTypesOutput) SetConnectionStatus(v *ConnectionStatusResourceTypeEventConfiguration) *GetEventConfigurationByResourceTypesOutput

SetConnectionStatus sets the ConnectionStatus field's value.

func (*GetEventConfigurationByResourceTypesOutput) SetDeviceRegistrationState ¶

func (s *GetEventConfigurationByResourceTypesOutput) SetDeviceRegistrationState(v *DeviceRegistrationStateResourceTypeEventConfiguration) *GetEventConfigurationByResourceTypesOutput

SetDeviceRegistrationState sets the DeviceRegistrationState field's value.

func (*GetEventConfigurationByResourceTypesOutput) SetJoin ¶

func (s *GetEventConfigurationByResourceTypesOutput) SetJoin(v *JoinResourceTypeEventConfiguration) *GetEventConfigurationByResourceTypesOutput

SetJoin sets the Join field's value.

func (*GetEventConfigurationByResourceTypesOutput) SetMessageDeliveryStatus ¶

func (s *GetEventConfigurationByResourceTypesOutput) SetMessageDeliveryStatus(v *MessageDeliveryStatusResourceTypeEventConfiguration) *GetEventConfigurationByResourceTypesOutput

SetMessageDeliveryStatus sets the MessageDeliveryStatus field's value.

func (*GetEventConfigurationByResourceTypesOutput) SetProximity ¶

func (s *GetEventConfigurationByResourceTypesOutput) SetProximity(v *ProximityResourceTypeEventConfiguration) *GetEventConfigurationByResourceTypesOutput

SetProximity sets the Proximity field's value.

func (GetEventConfigurationByResourceTypesOutput) String ¶

func (s GetEventConfigurationByResourceTypesOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetFuotaTaskInput ¶

type GetFuotaTaskInput struct {

    // The ID of a FUOTA task.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (GetFuotaTaskInput) GoString ¶

func (s GetFuotaTaskInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetFuotaTaskInput) SetId ¶

func (s *GetFuotaTaskInput) SetId(v string) *GetFuotaTaskInput

SetId sets the Id field's value.

func (GetFuotaTaskInput) String ¶

func (s GetFuotaTaskInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetFuotaTaskInput) Validate ¶

func (s *GetFuotaTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetFuotaTaskOutput ¶

type GetFuotaTaskOutput struct {

    // The arn of a FUOTA task.
    Arn *string `type:"string"`

    // Created at timestamp for the resource.
    CreatedAt *time.Time `type:"timestamp"`

    // The description of the new resource.
    Description *string `type:"string"`

    // The S3 URI points to a firmware update image that is to be used with a FUOTA
    // task.
    FirmwareUpdateImage *string `min:"1" type:"string"`

    // The firmware update role that is to be used with a FUOTA task.
    FirmwareUpdateRole *string `min:"1" type:"string"`

    // The interval for sending fragments in milliseconds, rounded to the nearest
    // second.
    //
    // This interval only determines the timing for when the Cloud sends down the
    // fragments to yor device. There can be a delay for when your device will receive
    // these fragments. This delay depends on the device's class and the communication
    // delay with the cloud.
    FragmentIntervalMS *int64 `min:"1" type:"integer"`

    // The size of each fragment in bytes. This parameter is supported only for
    // FUOTA tasks with multicast groups.
    FragmentSizeBytes *int64 `min:"1" type:"integer"`

    // The ID of a FUOTA task.
    Id *string `type:"string"`

    // The LoRaWAN information returned from getting a FUOTA task.
    LoRaWAN *LoRaWANFuotaTaskGetInfo `type:"structure"`

    // The name of a FUOTA task.
    Name *string `type:"string"`

    // The percentage of the added fragments that are redundant. For example, if
    // the size of the firmware image file is 100 bytes and the fragment size is
    // 10 bytes, with RedundancyPercent set to 50(%), the final number of encoded
    // fragments is (100 / 10) + (100 / 10 * 50%) = 15.
    RedundancyPercent *int64 `type:"integer"`

    // The status of a FUOTA task.
    Status *string `type:"string" enum:"FuotaTaskStatus"`
    // contains filtered or unexported fields
}

func (GetFuotaTaskOutput) GoString ¶

func (s GetFuotaTaskOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetFuotaTaskOutput) SetArn ¶

func (s *GetFuotaTaskOutput) SetArn(v string) *GetFuotaTaskOutput

SetArn sets the Arn field's value.

func (*GetFuotaTaskOutput) SetCreatedAt ¶

func (s *GetFuotaTaskOutput) SetCreatedAt(v time.Time) *GetFuotaTaskOutput

SetCreatedAt sets the CreatedAt field's value.

func (*GetFuotaTaskOutput) SetDescription ¶

func (s *GetFuotaTaskOutput) SetDescription(v string) *GetFuotaTaskOutput

SetDescription sets the Description field's value.

func (*GetFuotaTaskOutput) SetFirmwareUpdateImage ¶

func (s *GetFuotaTaskOutput) SetFirmwareUpdateImage(v string) *GetFuotaTaskOutput

SetFirmwareUpdateImage sets the FirmwareUpdateImage field's value.

func (*GetFuotaTaskOutput) SetFirmwareUpdateRole ¶

func (s *GetFuotaTaskOutput) SetFirmwareUpdateRole(v string) *GetFuotaTaskOutput

SetFirmwareUpdateRole sets the FirmwareUpdateRole field's value.

func (*GetFuotaTaskOutput) SetFragmentIntervalMS ¶

func (s *GetFuotaTaskOutput) SetFragmentIntervalMS(v int64) *GetFuotaTaskOutput

SetFragmentIntervalMS sets the FragmentIntervalMS field's value.

func (*GetFuotaTaskOutput) SetFragmentSizeBytes ¶

func (s *GetFuotaTaskOutput) SetFragmentSizeBytes(v int64) *GetFuotaTaskOutput

SetFragmentSizeBytes sets the FragmentSizeBytes field's value.

func (*GetFuotaTaskOutput) SetId ¶

func (s *GetFuotaTaskOutput) SetId(v string) *GetFuotaTaskOutput

SetId sets the Id field's value.

func (*GetFuotaTaskOutput) SetLoRaWAN ¶

func (s *GetFuotaTaskOutput) SetLoRaWAN(v *LoRaWANFuotaTaskGetInfo) *GetFuotaTaskOutput

SetLoRaWAN sets the LoRaWAN field's value.

func (*GetFuotaTaskOutput) SetName ¶

func (s *GetFuotaTaskOutput) SetName(v string) *GetFuotaTaskOutput

SetName sets the Name field's value.

func (*GetFuotaTaskOutput) SetRedundancyPercent ¶

func (s *GetFuotaTaskOutput) SetRedundancyPercent(v int64) *GetFuotaTaskOutput

SetRedundancyPercent sets the RedundancyPercent field's value.

func (*GetFuotaTaskOutput) SetStatus ¶

func (s *GetFuotaTaskOutput) SetStatus(v string) *GetFuotaTaskOutput

SetStatus sets the Status field's value.

func (GetFuotaTaskOutput) String ¶

func (s GetFuotaTaskOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetLogLevelsByResourceTypesInput ¶

type GetLogLevelsByResourceTypesInput struct {
    // contains filtered or unexported fields
}

func (GetLogLevelsByResourceTypesInput) GoString ¶

func (s GetLogLevelsByResourceTypesInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (GetLogLevelsByResourceTypesInput) String ¶

func (s GetLogLevelsByResourceTypesInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetLogLevelsByResourceTypesOutput ¶

type GetLogLevelsByResourceTypesOutput struct {

    // The log level for a log message. The log levels can be disabled, or set to
    // ERROR to display less verbose logs containing only error information, or
    // to INFO for more detailed logs.
    DefaultLogLevel *string `type:"string" enum:"LogLevel"`

    // The list of wireless device log options.
    WirelessDeviceLogOptions []*WirelessDeviceLogOption `type:"list"`

    // The list of wireless gateway log options.
    WirelessGatewayLogOptions []*WirelessGatewayLogOption `type:"list"`
    // contains filtered or unexported fields
}

func (GetLogLevelsByResourceTypesOutput) GoString ¶

func (s GetLogLevelsByResourceTypesOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetLogLevelsByResourceTypesOutput) SetDefaultLogLevel ¶

func (s *GetLogLevelsByResourceTypesOutput) SetDefaultLogLevel(v string) *GetLogLevelsByResourceTypesOutput

SetDefaultLogLevel sets the DefaultLogLevel field's value.

func (*GetLogLevelsByResourceTypesOutput) SetWirelessDeviceLogOptions ¶

func (s *GetLogLevelsByResourceTypesOutput) SetWirelessDeviceLogOptions(v []*WirelessDeviceLogOption) *GetLogLevelsByResourceTypesOutput

SetWirelessDeviceLogOptions sets the WirelessDeviceLogOptions field's value.

func (*GetLogLevelsByResourceTypesOutput) SetWirelessGatewayLogOptions ¶

func (s *GetLogLevelsByResourceTypesOutput) SetWirelessGatewayLogOptions(v []*WirelessGatewayLogOption) *GetLogLevelsByResourceTypesOutput

SetWirelessGatewayLogOptions sets the WirelessGatewayLogOptions field's value.

func (GetLogLevelsByResourceTypesOutput) String ¶

func (s GetLogLevelsByResourceTypesOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetMetricConfigurationInput ¶

type GetMetricConfigurationInput struct {
    // contains filtered or unexported fields
}

func (GetMetricConfigurationInput) GoString ¶

func (s GetMetricConfigurationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (GetMetricConfigurationInput) String ¶

func (s GetMetricConfigurationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetMetricConfigurationOutput ¶

type GetMetricConfigurationOutput struct {

    // The configuration status of the AWS account for summary metric aggregation.
    SummaryMetric *SummaryMetricConfiguration `type:"structure"`
    // contains filtered or unexported fields
}

func (GetMetricConfigurationOutput) GoString ¶

func (s GetMetricConfigurationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMetricConfigurationOutput) SetSummaryMetric ¶

func (s *GetMetricConfigurationOutput) SetSummaryMetric(v *SummaryMetricConfiguration) *GetMetricConfigurationOutput

SetSummaryMetric sets the SummaryMetric field's value.

func (GetMetricConfigurationOutput) String ¶

func (s GetMetricConfigurationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetMetricsInput ¶

type GetMetricsInput struct {

    // The list of queries to retrieve the summary metrics.
    SummaryMetricQueries []*SummaryMetricQuery `type:"list"`
    // contains filtered or unexported fields
}

func (GetMetricsInput) GoString ¶

func (s GetMetricsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMetricsInput) SetSummaryMetricQueries ¶

func (s *GetMetricsInput) SetSummaryMetricQueries(v []*SummaryMetricQuery) *GetMetricsInput

SetSummaryMetricQueries sets the SummaryMetricQueries field's value.

func (GetMetricsInput) String ¶

func (s GetMetricsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetMetricsOutput ¶

type GetMetricsOutput struct {

    // The list of summary metrics that were retrieved.
    SummaryMetricQueryResults []*SummaryMetricQueryResult `type:"list"`
    // contains filtered or unexported fields
}

func (GetMetricsOutput) GoString ¶

func (s GetMetricsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMetricsOutput) SetSummaryMetricQueryResults ¶

func (s *GetMetricsOutput) SetSummaryMetricQueryResults(v []*SummaryMetricQueryResult) *GetMetricsOutput

SetSummaryMetricQueryResults sets the SummaryMetricQueryResults field's value.

func (GetMetricsOutput) String ¶

func (s GetMetricsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetMulticastGroupInput ¶

type GetMulticastGroupInput struct {

    // The ID of the multicast group.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (GetMulticastGroupInput) GoString ¶

func (s GetMulticastGroupInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMulticastGroupInput) SetId ¶

func (s *GetMulticastGroupInput) SetId(v string) *GetMulticastGroupInput

SetId sets the Id field's value.

func (GetMulticastGroupInput) String ¶

func (s GetMulticastGroupInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMulticastGroupInput) Validate ¶

func (s *GetMulticastGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetMulticastGroupOutput ¶

type GetMulticastGroupOutput struct {

    // The arn of the multicast group.
    Arn *string `type:"string"`

    // Created at timestamp for the resource.
    CreatedAt *time.Time `type:"timestamp"`

    // The description of the new resource.
    Description *string `type:"string"`

    // The ID of the multicast group.
    Id *string `type:"string"`

    // The LoRaWAN information that is to be returned from getting multicast group
    // information.
    LoRaWAN *LoRaWANMulticastGet `type:"structure"`

    // The name of the multicast group.
    Name *string `type:"string"`

    // The status of the multicast group.
    Status *string `type:"string"`
    // contains filtered or unexported fields
}

func (GetMulticastGroupOutput) GoString ¶

func (s GetMulticastGroupOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMulticastGroupOutput) SetArn ¶

func (s *GetMulticastGroupOutput) SetArn(v string) *GetMulticastGroupOutput

SetArn sets the Arn field's value.

func (*GetMulticastGroupOutput) SetCreatedAt ¶

func (s *GetMulticastGroupOutput) SetCreatedAt(v time.Time) *GetMulticastGroupOutput

SetCreatedAt sets the CreatedAt field's value.

func (*GetMulticastGroupOutput) SetDescription ¶

func (s *GetMulticastGroupOutput) SetDescription(v string) *GetMulticastGroupOutput

SetDescription sets the Description field's value.

func (*GetMulticastGroupOutput) SetId ¶

func (s *GetMulticastGroupOutput) SetId(v string) *GetMulticastGroupOutput

SetId sets the Id field's value.

func (*GetMulticastGroupOutput) SetLoRaWAN ¶

func (s *GetMulticastGroupOutput) SetLoRaWAN(v *LoRaWANMulticastGet) *GetMulticastGroupOutput

SetLoRaWAN sets the LoRaWAN field's value.

func (*GetMulticastGroupOutput) SetName ¶

func (s *GetMulticastGroupOutput) SetName(v string) *GetMulticastGroupOutput

SetName sets the Name field's value.

func (*GetMulticastGroupOutput) SetStatus ¶

func (s *GetMulticastGroupOutput) SetStatus(v string) *GetMulticastGroupOutput

SetStatus sets the Status field's value.

func (GetMulticastGroupOutput) String ¶

func (s GetMulticastGroupOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetMulticastGroupSessionInput ¶

type GetMulticastGroupSessionInput struct {

    // The ID of the multicast group.
    //
    // Id is a required field
    Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (GetMulticastGroupSessionInput) GoString ¶

func (s GetMulticastGroupSessionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMulticastGroupSessionInput) SetId ¶

func (s *GetMulticastGroupSessionInput) SetId(v string) *GetMulticastGroupSessionInput

SetId sets the Id field's value.

func (GetMulticastGroupSessionInput) String ¶

func (s GetMulticastGroupSessionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMulticastGroupSessionInput) Validate ¶

func (s *GetMulticastGroupSessionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetMulticastGroupSessionOutput ¶

type GetMulticastGroupSessionOutput struct {

    // The LoRaWAN information used with the multicast session.
    LoRaWAN *LoRaWANMulticastSession `type:"structure"`
    // contains filtered or unexported fields
}

func (GetMulticastGroupSessionOutput) GoString ¶

func (s GetMulticastGroupSessionOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetMulticastGroupSessionOutput) SetLoRaWAN ¶

func (s *GetMulticastGroupSessionOutput) SetLoRaWAN(v *LoRaWANMulticastSession) *GetMulticastGroupSessionOutput

SetLoRaWAN sets the LoRaWAN field's value.

func (GetMulticastGroupSessionOutput) String ¶

func (s GetMulticastGroupSessionOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetNetworkAnalyzerConfigurationInput ¶

type GetNetworkAnalyzerConfigurationInput struct {

    // Name of the network analyzer configuration.
    //
    // ConfigurationName is a required field
    ConfigurationName *string `location:"uri" locationName:"ConfigurationName" min:"1" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (GetNetworkAnalyzerConfigurationInput) GoString ¶

func (s GetNetworkAnalyzerConfigurationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetNetworkAnalyzerConfigurationInput) SetConfigurationName ¶

func (s *GetNetworkAnalyzerConfigurationInput) SetConfigurationName(v string) *GetNetworkAnalyzerConfigurationInput

SetConfigurationName sets the ConfigurationName field's value.

func (GetNetworkAnalyzerConfigurationInput) String ¶

func (s GetNetworkAnalyzerConfigurationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetNetworkAnalyzerConfigurationInput) Validate ¶

func (s *GetNetworkAnalyzerConfigurationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetNetworkAnalyzerConfigurationOutput ¶

type GetNetworkAnalyzerConfigurationOutput struct {

    // The Amazon Resource Name of the new resource.
    Arn *string `type:"string"`

    // The description of the new resource.
    Description *string `type:"string"`

    // List of multicast group resources that have been added to the network analyzer
    // configuration.
    MulticastGroups []*string `type:"list"`

    // Name of the network analyzer configuration.
    Name *string `min:"1" type:"string"`

    // Trace content for your wireless devices, gateways, and multicast groups.
    TraceContent *TraceContent `type:"structure"`

    // List of wireless device resources that have been added to the network analyzer
    // configuration.
    WirelessDevices []*string `type:"list"`

    // List of wireless gateway resources that have been added to the network analyzer
    // configuration.
    WirelessGateways []*string `type:"list"`
    // contains filtered or unexported fields
}

func (GetNetworkAnalyzerConfigurationOutput) GoString ¶

func (s GetNetworkAnalyzerConfigurationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetNetworkAnalyzerConfigurationOutput) SetArn ¶

func (s *GetNetworkAnalyzerConfigurationOutput) SetArn(v string) *GetNetworkAnalyzerConfigurationOutput

SetArn sets the Arn field's value.

func (*GetNetworkAnalyzerConfigurationOutput) SetDescription ¶

func (s *GetNetworkAnalyzerConfigurationOutput) SetDescription(v string) *GetNetworkAnalyzerConfigurationOutput

SetDescription sets the Description field's value.

func (*GetNetworkAnalyzerConfigurationOutput) SetMulticastGroups ¶

func (s *GetNetworkAnalyzerConfigurationOutput) SetMulticastGroups(v []*string) *GetNetworkAnalyzerConfigurationOutput

SetMulticastGroups sets the MulticastGroups field's value.

func (*GetNetworkAnalyzerConfigurationOutput) SetName ¶

func (s *GetNetworkAnalyzerConfigurationOutput) SetName(v string) *GetNetworkAnalyzerConfigurationOutput

SetName sets the Name field's value.

func (*GetNetworkAnalyzerConfigurationOutput) SetTraceContent ¶

func (s *GetNetworkAnalyzerConfigurationOutput) SetTraceContent(v *TraceContent) *GetNetworkAnalyzerConfigurationOutput

SetTraceContent sets the TraceContent field's value.

func (*GetNetworkAnalyzerConfigurationOutput) SetWirelessDevices ¶

func (s *GetNetworkAnalyzerConfigurationOutput) SetWirelessDevices(v []*string) *GetNetworkAnalyzerConfigurationOutput

SetWirelessDevices sets the WirelessDevices field's value.

func (*GetNetworkAnalyzerConfigurationOutput) SetWirelessGateways ¶

func (s *GetNetworkAnalyzerConfigurationOutput) SetWirelessGateways(v []*string) *GetNetworkAnalyzerConfigurationOutput

SetWirelessGateways sets the WirelessGateways field's value.

func (GetNetworkAnalyzerConfigurationOutput) String ¶

func (s GetNetworkAnalyzerConfigurationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetPartnerAccountInput ¶

type GetPartnerAccountInput struct {

    // The partner account ID to disassociate from the AWS account.
    //
    // PartnerAccountId is a required field
    PartnerAccountId *string `location:"uri" locationName:"PartnerAccountId" type:"string" required:"true"`

    // The partner type.
    //
    // PartnerType is a required field
    PartnerType *string `location:"querystring" locationName:"partnerType" type:"string" required:"true" enum:"PartnerType"`
    // contains filtered or unexported fields
}

func (GetPartnerAccountInput) GoString ¶

func (s GetPartnerAccountInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPartnerAccountInput) SetPartnerAccountId ¶

func (s *GetPartnerAccountInput) SetPartnerAccountId(v string) *GetPartnerAccountInput

SetPartnerAccountId sets the PartnerAccountId field's value.

func (*GetPartnerAccountInput) SetPartnerType ¶

func (s *GetPartnerAccountInput) SetPartnerType(v string) *GetPartnerAccountInput

SetPartnerType sets the PartnerType field's value.

func (GetPartnerAccountInput) String ¶

func (s GetPartnerAccountInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPartnerAccountInput) Validate ¶

func (s *GetPartnerAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetPartnerAccountOutput ¶

type GetPartnerAccountOutput struct {

    // Whether the partner account is linked to the AWS account.
    AccountLinked *bool `type:"boolean"`

    // The Sidewalk account credentials.
    Sidewalk *SidewalkAccountInfoWithFingerprint `type:"structure"`
    // contains filtered or unexported fields
}

func (GetPartnerAccountOutput) GoString ¶

func (s GetPartnerAccountOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPartnerAccountOutput) SetAccountLinked ¶

func (s *GetPartnerAccountOutput) SetAccountLinked(v bool) *GetPartnerAccountOutput

SetAccountLinked sets the AccountLinked field's value.

func (*GetPartnerAccountOutput) SetSidewalk ¶

func (s *GetPartnerAccountOutput) SetSidewalk(v *SidewalkAccountInfoWithFingerprint) *GetPartnerAccountOutput

SetSidewalk sets the Sidewalk field's value.

func (GetPartnerAccountOutput) String ¶

func (s GetPartnerAccountOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetPositionConfigurationInput ¶

type GetPositionConfigurationInput struct {

    // Resource identifier used in a position configuration.
    //
    // ResourceIdentifier is a required field
    ResourceIdentifier *string `location:"uri" locationName:"ResourceIdentifier" type:"string" required:"true"`

    // Resource type of the resource for which position configuration is retrieved.
    //
    // ResourceType is a required field
    ResourceType *string `location:"querystring" locationName:"resourceType" type:"string" required:"true" enum:"PositionResourceType"`
    // contains filtered or unexported fields
}

Deprecated: This operation is no longer supported.

func (GetPositionConfigurationInput) GoString ¶

func (s GetPositionConfigurationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionConfigurationInput) SetResourceIdentifier ¶

func (s *GetPositionConfigurationInput) SetResourceIdentifier(v string) *GetPositionConfigurationInput

SetResourceIdentifier sets the ResourceIdentifier field's value.

func (*GetPositionConfigurationInput) SetResourceType ¶

func (s *GetPositionConfigurationInput) SetResourceType(v string) *GetPositionConfigurationInput

SetResourceType sets the ResourceType field's value.

func (GetPositionConfigurationInput) String ¶

func (s GetPositionConfigurationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionConfigurationInput) Validate ¶

func (s *GetPositionConfigurationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetPositionConfigurationOutput ¶

type GetPositionConfigurationOutput struct {

    // The position data destination that describes the AWS IoT rule that processes
    // the device's position data for use by AWS IoT Core for LoRaWAN.
    Destination *string `type:"string"`

    // The wrapper for the solver configuration details object.
    Solvers *PositionSolverDetails `type:"structure"`
    // contains filtered or unexported fields
}

Deprecated: This operation is no longer supported.

func (GetPositionConfigurationOutput) GoString ¶

func (s GetPositionConfigurationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionConfigurationOutput) SetDestination ¶

func (s *GetPositionConfigurationOutput) SetDestination(v string) *GetPositionConfigurationOutput

SetDestination sets the Destination field's value.

func (*GetPositionConfigurationOutput) SetSolvers ¶

func (s *GetPositionConfigurationOutput) SetSolvers(v *PositionSolverDetails) *GetPositionConfigurationOutput

SetSolvers sets the Solvers field's value.

func (GetPositionConfigurationOutput) String ¶

func (s GetPositionConfigurationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetPositionEstimateInput ¶

type GetPositionEstimateInput struct {

    // Retrieves an estimated device position by resolving measurement data from
    // cellular radio towers. The position is resolved using HERE's cellular-based
    // solver.
    CellTowers *CellTowers `type:"structure"`

    // Retrieves an estimated device position by resolving the global navigation
    // satellite system (GNSS) scan data. The position is resolved using the GNSS
    // solver powered by LoRa Cloud.
    Gnss *Gnss `type:"structure"`

    // Retrieves an estimated device position by resolving the IP address information
    // from the device. The position is resolved using MaxMind's IP-based solver.
    Ip *Ip `type:"structure"`

    // Optional information that specifies the time when the position information
    // will be resolved. It uses the Unix timestamp format. If not specified, the
    // time at which the request was received will be used.
    Timestamp *time.Time `type:"timestamp"`

    // Retrieves an estimated device position by resolving WLAN measurement data.
    // The position is resolved using HERE's Wi-Fi based solver.
    WiFiAccessPoints []*WiFiAccessPoint `type:"list"`
    // contains filtered or unexported fields
}

func (GetPositionEstimateInput) GoString ¶

func (s GetPositionEstimateInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionEstimateInput) SetCellTowers ¶

func (s *GetPositionEstimateInput) SetCellTowers(v *CellTowers) *GetPositionEstimateInput

SetCellTowers sets the CellTowers field's value.

func (*GetPositionEstimateInput) SetGnss ¶

func (s *GetPositionEstimateInput) SetGnss(v *Gnss) *GetPositionEstimateInput

SetGnss sets the Gnss field's value.

func (*GetPositionEstimateInput) SetIp ¶

func (s *GetPositionEstimateInput) SetIp(v *Ip) *GetPositionEstimateInput

SetIp sets the Ip field's value.

func (*GetPositionEstimateInput) SetTimestamp ¶

func (s *GetPositionEstimateInput) SetTimestamp(v time.Time) *GetPositionEstimateInput

SetTimestamp sets the Timestamp field's value.

func (*GetPositionEstimateInput) SetWiFiAccessPoints ¶

func (s *GetPositionEstimateInput) SetWiFiAccessPoints(v []*WiFiAccessPoint) *GetPositionEstimateInput

SetWiFiAccessPoints sets the WiFiAccessPoints field's value.

func (GetPositionEstimateInput) String ¶

func (s GetPositionEstimateInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionEstimateInput) Validate ¶

func (s *GetPositionEstimateInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetPositionEstimateOutput ¶

type GetPositionEstimateOutput struct {

    // The position information of the resource, displayed as a JSON payload. The
    // payload is of type blob and uses the GeoJSON (https://geojson.org/) format,
    // which a format that's used to encode geographic data structures. A sample
    // payload contains the timestamp information, the WGS84 coordinates of the
    // location, and the accuracy and confidence level. For more information and
    // examples, see Resolve device location (console) (https://docs.aws.amazon.com/iot/latest/developerguide/location-resolve-console.html).
    GeoJsonPayload []byte `type:"blob"`
    // contains filtered or unexported fields
}

func (GetPositionEstimateOutput) GoString ¶

func (s GetPositionEstimateOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionEstimateOutput) SetGeoJsonPayload ¶

func (s *GetPositionEstimateOutput) SetGeoJsonPayload(v []byte) *GetPositionEstimateOutput

SetGeoJsonPayload sets the GeoJsonPayload field's value.

func (GetPositionEstimateOutput) String ¶

func (s GetPositionEstimateOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type GetPositionInput ¶

type GetPositionInput struct {

    // Resource identifier used to retrieve the position information.
    //
    // ResourceIdentifier is a required field
    ResourceIdentifier *string `location:"uri" locationName:"ResourceIdentifier" type:"string" required:"true"`

    // Resource type of the resource for which position information is retrieved.
    //
    // ResourceType is a required field
    ResourceType *string `location:"querystring" locationName:"resourceType" type:"string" required:"true" enum:"PositionResourceType"`
    // contains filtered or unexported fields
}

Deprecated: This operation is no longer supported.

func (GetPositionInput) GoString ¶

func (s GetPositionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionInput) SetResourceIdentifier ¶

func (s *GetPositionInput) SetResourceIdentifier(v string) *GetPositionInput

SetResourceIdentifier sets the ResourceIdentifier field's value.

func (*GetPositionInput) SetResourceType ¶

func (s *GetPositionInput) SetResourceType(v string) *GetPositionInput

SetResourceType sets the ResourceType field's value.

func (GetPositionInput) String ¶

func (s GetPositionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetPositionInput) Validate ¶

func (s *GetPositionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetPositionOutput ¶