NatGateway

Gets and sets the property ConnectivityType.

Indicates whether the NAT gateway supports public or private connectivity.

Gets and sets the property CreateTime.

The date and time the NAT gateway was created.

Gets and sets the property DeleteTime.

The date and time the NAT gateway was deleted, if applicable.

Gets and sets the property FailureCode.

If the NAT gateway could not be created, specifies the error code for the failure. (InsufficientFreeAddressesInSubnet | Gateway.NotAttached | InvalidAllocationID.NotFound | Resource.AlreadyAssociated | InternalError | InvalidSubnetID.NotFound)

Gets and sets the property FailureMessage.

If the NAT gateway could not be created, specifies the error message for the failure, that corresponds to the error code.

• For InsufficientFreeAddressesInSubnet: "Subnet has insufficient free addresses to create this NAT gateway"

• For Gateway.NotAttached: "Network vpc-xxxxxxxx has no Internet gateway attached"

• For InvalidAllocationID.NotFound: "Elastic IP address eipalloc-xxxxxxxx could not be associated with this NAT gateway"

• For Resource.AlreadyAssociated: "Elastic IP address eipalloc-xxxxxxxx is already associated"

• For InternalError: "Network interface eni-xxxxxxxx, created and used internally by this NAT gateway is in an invalid state. Please try again."

• For InvalidSubnetID.NotFound: "The specified subnet subnet-xxxxxxxx does not exist or could not be found."

Gets and sets the property NatGatewayAddresses.

Information about the IP addresses and network interface associated with the NAT gateway.

Gets and sets the property NatGatewayId.

The ID of the NAT gateway.

Gets and sets the property ProvisionedBandwidth.

Reserved. If you need to sustain traffic greater than the documented limits, contact Amazon Web Services Support.

Gets and sets the property State.

The state of the NAT gateway.

• pending: The NAT gateway is being created and is not ready to process traffic.

• failed: The NAT gateway could not be created. Check the failureCode and failureMessage fields for the reason.

• available: The NAT gateway is able to process traffic. This status remains until you delete the NAT gateway, and does not indicate the health of the NAT gateway.

• deleting: The NAT gateway is in the process of being terminated and may still be processing traffic.

• deleted: The NAT gateway has been terminated and is no longer processing traffic.

Gets and sets the property SubnetId.

The ID of the subnet in which the NAT gateway is located.

Gets and sets the property Tags.

The tags for the NAT gateway.

Gets and sets the property VpcId.

The ID of the VPC in which the NAT gateway is located.