AWS SDK Version 3 for .NET
API Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Container for the parameters to the RegisterImage operation. Registers an AMI. When you're creating an instance-store backed AMI, registering the AMI is the final step in the creation process. For more information about creating AMIs, see Create an AMI from a snapshot and Create an instance-store backed AMI in the Amazon EC2 User Guide.

For Amazon EBS-backed instances, CreateImage creates and registers the AMI in a single request, so you don't have to register the AMI yourself. We recommend that you always use CreateImage unless you have a specific reason to use RegisterImage.

If needed, you can deregister an AMI at any time. Any modifications you make to an AMI backed by an instance store volume invalidates its registration. If you make changes to an image, deregister the previous image and register the new image.

Register a snapshot of a root device volume

You can use RegisterImage to create an Amazon EBS-backed Linux AMI from a snapshot of a root device volume. You specify the snapshot using a block device mapping. You can't set the encryption state of the volume using the block device mapping. If the snapshot is encrypted, or encryption by default is enabled, the root volume of an instance launched from the AMI is encrypted.

For more information, see Create an AMI from a snapshot and Use encryption with Amazon EBS-backed AMIs in the Amazon EC2 User Guide.

Amazon Web Services Marketplace product codes

If any snapshots have Amazon Web Services Marketplace product codes, they are copied to the new AMI.

In most cases, AMIs for Windows, RedHat, SUSE, and SQL Server require correct licensing information to be present on the AMI. For more information, see Understand AMI billing information in the Amazon EC2 User Guide. When creating an AMI from a snapshot, the RegisterImage operation derives the correct billing information from the snapshot's metadata, but this requires the appropriate metadata to be present. To verify if the correct billing information was applied, check the PlatformDetails field on the new AMI. If the field is empty or doesn't match the expected operating system code (for example, Windows, RedHat, SUSE, or SQL), the AMI creation was unsuccessful, and you should discard the AMI and instead create the AMI from an instance using CreateImage. For more information, see Create an AMI from an instance in the Amazon EC2 User Guide.

If you purchase a Reserved Instance to apply to an On-Demand Instance that was launched from an AMI with a billing product code, make sure that the Reserved Instance has the matching billing product code. If you purchase a Reserved Instance without the matching billing product code, the Reserved Instance will not be applied to the On-Demand Instance. For information about how to obtain the platform details and billing information of an AMI, see Understand AMI billing information in the Amazon EC2 User Guide.

Inheritance Hierarchy

System.Object
  Amazon.Runtime.AmazonWebServiceRequest
    Amazon.EC2.AmazonEC2Request
      Amazon.EC2.Model.RegisterImageRequest

Namespace: Amazon.EC2.Model
Assembly: AWSSDK.EC2.dll
Version: 3.x.y.z

Syntax

C# 
public class RegisterImageRequest : AmazonEC2Request
         IAmazonWebServiceRequest

The RegisterImageRequest type exposes the following members

Constructors

NameDescription
Public Method RegisterImageRequest()

Empty constructor used to set properties independently even when a simple constructor is available

Public Method RegisterImageRequest(string)

Instantiates RegisterImageRequest with the parameterized properties

Properties

NameTypeDescription
Public Property Architecture Amazon.EC2.ArchitectureValues

Gets and sets the property Architecture.

The architecture of the AMI.

Default: For Amazon EBS-backed AMIs, i386. For instance store-backed AMIs, the architecture specified in the manifest file.

Public Property BillingProducts System.Collections.Generic.List<System.String>

Gets and sets the property BillingProducts.

The billing product codes. Your account must be authorized to specify billing product codes.

If your account is not authorized to specify billing product codes, you can publish AMIs that include billable software and list them on the Amazon Web Services Marketplace. You must first register as a seller on the Amazon Web Services Marketplace. For more information, see Getting started as a seller and AMI-based products in the Amazon Web Services Marketplace Seller Guide.

Public Property BlockDeviceMappings System.Collections.Generic.List<Amazon.EC2.Model.BlockDeviceMapping>

Gets and sets the property BlockDeviceMappings.

The block device mapping entries.

If you specify an Amazon EBS volume using the ID of an Amazon EBS snapshot, you can't specify the encryption state of the volume.

If you create an AMI on an Outpost, then all backing snapshots must be on the same Outpost or in the Region of that Outpost. AMIs on an Outpost that include local snapshots can be used to launch instances on the same Outpost only. For more information, Amazon EBS local snapshots on Outposts in the Amazon EBS User Guide.

Public Property BootMode Amazon.EC2.BootModeValues

Gets and sets the property BootMode.

The boot mode of the AMI. A value of uefi-preferred indicates that the AMI supports both UEFI and Legacy BIOS.

The operating system contained in the AMI must be configured to support the specified boot mode.

For more information, see Boot modes in the Amazon EC2 User Guide.

Public Property Description System.String

Gets and sets the property Description.

A description for your AMI.

Public Property EnaSupport System.Boolean

Gets and sets the property EnaSupport.

Set to true to enable enhanced networking with ENA for the AMI and any instances that you launch from the AMI.

This option is supported only for HVM AMIs. Specifying this option with a PV AMI can make instances launched from the AMI unreachable.

Public Property ImageLocation System.String

Gets and sets the property ImageLocation.

The full path to your AMI manifest in Amazon S3 storage. The specified bucket must have the aws-exec-read canned access control list (ACL) to ensure that it can be accessed by Amazon EC2. For more information, see Canned ACLs in the Amazon S3 Service Developer Guide.

Public Property ImdsSupport Amazon.EC2.ImdsSupportValues

Gets and sets the property ImdsSupport.

Set to v2.0 to indicate that IMDSv2 is specified in the AMI. Instances launched from this AMI will have HttpTokens automatically set to required so that, by default, the instance requires that IMDSv2 is used when requesting instance metadata. In addition, HttpPutResponseHopLimit is set to 2. For more information, see Configure the AMI in the Amazon EC2 User Guide.

If you set the value to v2.0, make sure that your AMI software can support IMDSv2.

Public Property KernelId System.String

Gets and sets the property KernelId.

The ID of the kernel.

Public Property Name System.String

Gets and sets the property Name.

A name for your AMI.

Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('), at-signs (@), or underscores(_)

Public Property RamdiskId System.String

Gets and sets the property RamdiskId.

The ID of the RAM disk.

Public Property RootDeviceName System.String

Gets and sets the property RootDeviceName.

The device name of the root device volume (for example, /dev/sda1).

Public Property SriovNetSupport System.String

Gets and sets the property SriovNetSupport.

Set to simple to enable enhanced networking with the Intel 82599 Virtual Function interface for the AMI and any instances that you launch from the AMI.

There is no way to disable sriovNetSupport at this time.

This option is supported only for HVM AMIs. Specifying this option with a PV AMI can make instances launched from the AMI unreachable.

Public Property TagSpecifications System.Collections.Generic.List<Amazon.EC2.Model.TagSpecification>

Gets and sets the property TagSpecifications.

The tags to apply to the AMI.

To tag the AMI, the value for ResourceType must be image. If you specify another value for ResourceType, the request fails.

To tag an AMI after it has been registered, see CreateTags.

Public Property TpmSupport Amazon.EC2.TpmSupportValues

Gets and sets the property TpmSupport.

Set to v2.0 to enable Trusted Platform Module (TPM) support. For more information, see NitroTPM in the Amazon EC2 User Guide.

Public Property UefiData System.String

Gets and sets the property UefiData.

Base64 representation of the non-volatile UEFI variable store. To retrieve the UEFI data, use the GetInstanceUefiData command. You can inspect and modify the UEFI data by using the python-uefivars tool on GitHub. For more information, see UEFI Secure Boot in the Amazon EC2 User Guide.

Public Property VirtualizationType System.String

Gets and sets the property VirtualizationType.

The type of virtualization (hvm | paravirtual).

Default: paravirtual

Version Information

.NET:
Supported in: 8.0 and newer, Core 3.1

.NET Standard:
Supported in: 2.0

.NET Framework:
Supported in: 4.5 and newer, 3.5