AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.
Retrieves an object from Amazon S3.
In the GetObject request, specify the full key name for the object.
General purpose buckets - Both the virtual-hosted-style requests and the path-style
requests are supported. For a virtual hosted-style request example, if you have the
object photos/2006/February/sample.jpg, specify the object key name as /photos/2006/February/sample.jpg.
For a path-style request example, if you have the object photos/2006/February/sample.jpg
in the bucket named examplebucket, specify the object key name as /examplebucket/photos/2006/February/sample.jpg.
For more information about request types, see HTTP
Host Header Bucket Specification in the Amazon S3 User Guide.
Directory buckets - Only virtual-hosted-style requests are supported. For
a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg
in the bucket named examplebucket--use1-az5--x-s3, specify the object key name
as /photos/2006/February/sample.jpg. Also, when you make requests to this API
operation, your requests are sent to the Zonal endpoint. These endpoints support virtual-hosted-style
requests in the format https://bucket-name.s3express-zone-id.region-code.amazonaws.com/key-name. Path-style requests are not supported. For more information about endpoints
in Availability Zones, see Regional
and Zonal endpoints for directory buckets in Availability Zones in the Amazon
S3 User Guide. For more information about endpoints in Local Zones, see Available
Local Zone for directory buckets in the Amazon S3 User Guide.
General purpose bucket permissions - You must have the required permissions
in a policy. To use GetObject, you must have the READ access to the
object (or version). If you grant READ access to the anonymous user, the GetObject
operation returns the object without using an authorization header. For more information,
see Specifying
permissions in a policy in the Amazon S3 User Guide.
If you include a versionId in your request header, you must have the s3:GetObjectVersion
permission to access a specific version of an object. The s3:GetObject permission
is not required in this scenario.
If you request the current version of an object without a specific versionId
in the request header, only the s3:GetObject permission is required. The s3:GetObjectVersion
permission is not required in this scenario.
If the object that you request doesn’t exist, the error that Amazon S3 returns depends
on whether you also have the s3:ListBucket permission.
If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an
HTTP status code 404 Not Found error.
If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status
code 403 Access Denied error.
Directory bucket permissions - To grant access to this API operation on a
directory bucket, we recommend that you use the CreateSession API operation for session-based authorization. Specifically,
you grant the s3express:CreateSession permission to the directory bucket in
a bucket policy or an IAM identity-based policy. Then, you make the CreateSession
API call on the bucket to obtain a session token. With the session token in your request
header, you can make API requests to this operation. After the session token expires,
you make another CreateSession API call to generate a new session token for
use. Amazon Web Services CLI or SDKs create session and refresh the session token
automatically to avoid service interruptions when a session expires. For more information
about authorization, see CreateSession.
If the object is encrypted using SSE-KMS, you must also have the kms:GenerateDataKey
and kms:Decrypt permissions in IAM identity-based policies and KMS key policies
for the KMS key.
If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval storage
class, the S3 Glacier Deep Archive storage class, the S3 Intelligent-Tiering Archive
Access tier, or the S3 Intelligent-Tiering Deep Archive Access tier, before you can
retrieve the object you must first restore a copy using RestoreObject.
Otherwise, this operation returns an InvalidObjectState error. For information
about restoring archived objects, see Restoring
Archived Objects in the Amazon S3 User Guide.
Directory buckets - For directory buckets, only the S3 Express One Zone storage
class is supported to store newly created objects. Unsupported storage class values
won't write a destination object and will respond with the HTTP status code 400
Bad Request.
Encryption request headers, like x-amz-server-side-encryption, should not be
sent for the GetObject requests, if your object uses server-side encryption
with Amazon S3 managed encryption keys (SSE-S3), server-side encryption with Key Management
Service (KMS) keys (SSE-KMS), or dual-layer server-side encryption with Amazon Web
Services KMS keys (DSSE-KMS). If you include the header in your GetObject requests
for the object that uses these types of keys, you’ll get an HTTP 400 Bad Request
error.
Directory buckets - For directory buckets, there are only two supported options for server-side encryption: SSE-S3 and SSE-KMS. SSE-C isn't supported. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide.
There are times when you want to override certain response header values of a GetObject
response. For example, you might override the Content-Disposition response
header value through your GetObject request.
You can override values for a set of response headers. These modified response header
values are included only in a successful response, that is, when the HTTP status code
200 OK is returned. The headers you can override using the following query
parameters in the request are a subset of the headers that Amazon S3 accepts when
you create an object.
The response headers that you can override for the GetObject response are Cache-Control,
Content-Disposition, Content-Encoding, Content-Language, Content-Type,
and Expires.
To override values for a set of response headers in the GetObject response,
you can use the following query parameters in the request.
response-cache-control
response-content-disposition
response-content-encoding
response-content-language
response-content-type
response-expires
When you use these parameters, you must sign the request by using either an Authorization header or a presigned URL. These parameters cannot be used with an unsigned (anonymous) request.
Directory buckets - The HTTP Host header syntax is Bucket-name.s3express-zone-id.region-code.amazonaws.com.
The following operations are related to GetObject:
For .NET Core this operation is only available in asynchronous form. Please refer to GetObjectAsync.
Namespace: Amazon.S3
Assembly: AWSSDK.S3.dll
Version: 3.x.y.z
public abstract GetObjectResponse GetObject( String bucketName, String key )
The bucket name containing the object. Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide. Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide. Object Lambda access points - When you use this action with an Object Lambda access point, you must direct requests to the Object Lambda access point hostname. The Object Lambda access point hostname takes the form AccessPointName-AccountId.s3-object-lambda.Region.amazonaws.com. Access points and Object Lambda access points are not supported by directory buckets. S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
Key of the object to get.
.NET Framework:
Supported in: 4.5 and newer, 3.5