Starting EC2-compatible instances automatically - AWS Snowball Edge Developer Guide
Creating an EC2-compatible launch configurationUpdating an EC2-compatible launch configurationDeleting an EC2-compatible launch configurationListig EC2-compatible launch configurationsCreating a Virtual Network Interface on a Snowball EdgeDescribing Your Virtual Network InterfacesUpdating a Virtual Network InterfaceDeleting a Virtual Network Interface

Starting EC2-compatible instances automatically

The Snowball Edge Client is a standalone command line interface (CLI) application that you can run in your environment. You can use it to perform some administrative tasks on your Snowball Edge device or cluster of devices. For more information about how to use the Snowball Edge client, including how to start and stop services with it, see Configuring and using the Snowball Edge Client.

Following, you can find information about the Snowball Edge client commands that are specific to compute instances, including examples of use.

For a list of Amazon EC2-compatible commands you can use on your AWS Snowball Edge device, see Supported Amazon EC2-compatible AWS CLI commands on a Snowball Edge.

Creating an EC2-compatible launch configuration on a Snowball Edge

To automatically start Amazon EC2-compatible compute instances on your AWS Snowball Edge device after it is unlocked, you can create a launch configuration. To do so, use the snowballEdge create-autostart-configuration command, as shown following.

Usage

snowballEdge create-autostart-configuration --physical-connector-type [SFP_PLUS or RJ45 or QSFP] --ip-address-assignment [DHCP or STATIC] [--static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]] --launch-template-id [--launch-template-version]

Updating an EC2-compatible launch configuration on a Snowball Edge

To update an existing launch configuration on your Snowball Edge, use the snowballEdge update-autostart-configuration command. You can find its usage following. To enable or disable a launch configuration, specify the --enabled parameter.

Usage

snowballEdge update-autostart-configuration --autostart-configuration-arn [--physical-connector-type [SFP_PLUS or RJ45 or QSFP]] [--ip-address-assignment [DHCP or STATIC]] [--static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]][--launch-template-id] [--launch-template-version] [--enabled]

Deleting an EC2-compatible launch configuration on a Snowball Edge

To delete a launch configuration that's no longer in use, use the snowballEdge delete-autostart-configuration command, as follows.

Usage

snowballEdge delete-autostart-configuration --autostart-configuration-arn

Listing EC2-compatible launch configurations on a Snowball Edge

To list the launch configurations that you have created on your Snowball Edge, use the describe-autostart-configurations command, as follows.

Usage

snowballEdge describe-autostart-configurations

Creating a Virtual Network Interface on a Snowball Edge

To run a compute instance or start the NFS interface on a Snowball Edge, first create a Virtual Network Interface (VNI). Each Snowball Edge has three network interfaces (NICs), the physical network interface controllers for the device. These are the RJ45, SFP, and QSFP ports on the back of the device.

Each VNI is based on a physical one, and you can have any number of VNI s associated with each NIC. To create a virtual network interface, use the snowballEdge create-virtual-network-interface command.

Note

The --static-ip-address-configuration parameter is valid only when using the STATIC option for the --ip-address-assignment parameter.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge create-virtual-network-interface --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]

The following usage example shows the method without the Snowball Edge client configured.

snowballEdge create-virtual-network-interface --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code] --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]
Example: Creating VNICs (Using DHCP)
snowballEdge create-virtual-network-interface --ip-address-assignment dhcp --physical-network-interface-id s.ni-8EXAMPLEaEXAMPLEd
{
  "VirtualNetworkInterface" : {
    "VirtualNetworkInterfaceArn" : "arn:aws:snowball-device:::interface/s.ni-8EXAMPLE8EXAMPLEf",
    "PhysicalNetworkInterfaceId" : "s.ni-8EXAMPLEaEXAMPLEd",
    "IpAddressAssignment" : "DHCP",
    "IpAddress" : "192.0.2.0",
    "Netmask" : "255.255.255.0",
    "DefaultGateway" : "192.0.2.1",
    "MacAddress" : "EX:AM:PL:E1:23:45",
    "MtuSize" : "1500"
  }
}

Describing Your Virtual Network Interfaces

To describe the VNICs that you previously created on your device, use the snowballEdge describe-virtual-network-interfaces command. You can find its usage following.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge describe-virtual-network-interfaces

The following usage example shows the method without the Snowball Edge client configured.

snowballEdge describe-virtual-network-interfaces --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code]
Example: Describing VNICs
snowballEdge describe-virtual-network-interfaces
[
  {
    "VirtualNetworkInterfaceArn" : "arn:aws:snowball-device:::interface/s.ni-8EXAMPLE8EXAMPLE8",
    "PhysicalNetworkInterfaceId" : "s.ni-8EXAMPLEaEXAMPLEd",
    "IpAddressAssignment" : "DHCP",
    "IpAddress" : "192.0.2.0",
    "Netmask" : "255.255.255.0",
    "DefaultGateway" : "192.0.2.1",
    "MacAddress" : "EX:AM:PL:E1:23:45",
    "MtuSize" : "1500"
  },{
    "VirtualNetworkInterfaceArn" : "arn:aws:snowball-device:::interface/s.ni-1EXAMPLE1EXAMPLE1",
    "PhysicalNetworkInterfaceId" : "s.ni-8EXAMPLEaEXAMPLEd",
    "IpAddressAssignment" : "DHCP",
    "IpAddress" : "192.0.2.2",
    "Netmask" : "255.255.255.0",
    "DefaultGateway" : "192.0.2.1",
    "MacAddress" : "12:34:5E:XA:MP:LE",
    "MtuSize" : "1500"
  }  
]

Updating a Virtual Network Interface on a Snowball Edge

After creating a virtual network interface (VNI), you can update its configuration using the snowballEdge update-virtual-network-interface command. After providing the Amazon Resource Name (ARN) for a particular VNI, you provide values only for whatever elements you are updating.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge update-virtual-network-interface --virtual-network-interface-arn [virtual network-interface-arn] --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]

The following usage example shows the method without the Snowball Edge client configured. 

snowballEdge update-virtual-network-interface --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code] --virtual-network-interface-arn [virtual network-interface-arn] --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]
Example: Updating a VNIC (Using DHCP)
snowballEdge update-virtual-network-interface --virtual-network-interface-arn arn:aws:snowball-device:::interface/s.ni-8EXAMPLEbEXAMPLEd --ip-address-assignment dhcp

Deleting a Virtual Network Interface on a Snowball Edge

To delete a virtual network interface (VNI), you can use the snowballEdge delete-virtual-network-interface command.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge delete-virtual-network-interface --virtual-network-interface-arn [virtual network-interface-arn]

The following usage example shows the method without the Snowball Edge client configured.

snowballEdge delete-virtual-network-interface --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code] --virtual-network-interface-arn [virtual network-interface-arn]
Example: Deleting a VNIC
snowballEdge delete-virtual-network-interface --virtual-network-interface-arn arn:aws:snowball-device:::interface/s.ni-8EXAMPLEbEXAMPLEd