Deploy a default Amazon EC2 host for Tape Gateway - AWS Storage Gateway

Deploy a default Amazon EC2 host for Tape Gateway

This topic lists the steps to deploy an Amazon EC2 host using the default specifications.

You can deploy and activate a Tape Gateway on an Amazon Elastic Compute Cloud (Amazon EC2) instance. The AWS Storage Gateway Amazon Machine Image (AMI) is available as a community AMI.

Note

Storage Gateway community AMIs are published and fully supported by AWS. You can see that the publisher is AWS, a verified provider.

  1. To set up the Amazon EC2instance, choose Amazon EC2 as the Host platform in the Platform options section of the workflow. For instructions on configuring the Amazon EC2 instance, see Deploying an Amazon EC2 instance to host your Tape Gateway.

  2. Select Launch instance to open the AWS Storage Gateway AMI template in the Amazon EC2 console and customize additional settings such as Instance types, Network settings and Configure storage.

  3. Optionally, you can select Use default settings in the Storage Gateway console to deploy an Amazon EC2 instance with the default configuration.

    The Amazon EC2 instance that Use default settings creates has the following default specifications:

    • Instance type — m5.xlarge

    • Network Settings

      • For VPC, select the VPC that you want your EC2 instance to run in.

      • For Subnet, specify the subnet that your EC2 instance should be launched in.

        Note

        VPC subnets will appear in the drop down only if they have the auto-assign public IPv4 address setting activated from the VPC management console.

      • Auto-assign Public IP — Activated

      An EC2 security group is created and associated with the EC2 instance. The security group has the following inbound port rules:

      Note

      You will need Port 80 open during gateway activation. The port is closed immediately following activation. Thereafter, your EC2 instance can only be accessed over the other ports from the selected VPC.

      The iSCSI targets on your gateway are only accessible from the hosts in the same VPC as the gateway. If the iSCSI targets need to be accessed from hosts outside of the VPC, you should update the appropriate security group rules.

      You can edit security groups at any time by navigating to the Amazon EC2 instance details page, selecting Security, navigating to Security group details, and choosing the security group ID.

      Port

      Protocol

      File System Protocol

      80

      TCP

      HTTP access for activation

      3260

      TCP

      iSCSI

    • Configure storage

      Default Settings

      AMI Root Volume

      Volume 2 Cache

      Volume 3 Cache

      Device Name

      '/dev/sdb'

      '/dev/sdc'

      Size

      80 Gib

      165 GiB

      150 GiB

      Volume Type

      gp3

      gp3

      gp3

      IOPS

      3000

      3000

      3000

      Delete on termination

      Yes

      Yes

      Yes

      Encrypted

      No

      No

      No

      Throughput

      125

      125

      125