Transferring files over a server endpoint using a client - AWS Transfer Family

Transferring files over a server endpoint using a client

You transfer files over the AWS Transfer Family service by specifying the transfer operation in a client. AWS Transfer Family supports the following clients:

  • We support version 3 of the SFTP protocol.

  • OpenSSH (macOS and Linux)

    Note

    This client works only with servers that are enabled for Secure Shell (SSH) File Transfer Protocol (SFTP).

  • WinSCP (Microsoft Windows only)

  • Cyberduck (Windows, macOS, and Linux)

  • FileZilla (Windows, macOS, and Linux)

The following limitations apply to every client:

  • The maximum number of concurrent, multiplexed, SFTP sessions per connection is 10.

  • There are two timeout values for SFTP/FTP/FTPS connections. For idle connections, the timeout value is 1800 seconds (30 minutes). If there is no activity after the period has passed the client may be disconnected. There is also a 300 seconds (5 minutes) timeout when a client is completely unresponsive.

  • Amazon S3 and Amazon EFS (due to the NFSv4 protocol) require filenames to be in UTF-8 encoding. Using different encoding can lead to unexpected results. For Amazon S3, see Object key naming guidelines.

  • For File Transfer Protocol over SSL (FTPS), only Explicit mode is supported. Implicit mode is not supported.

  • For File Transfer Protocol (FTP) and FTPS, only Passive mode is supported.

  • For FTP and FTPS, only STREAM mode is supported.

  • For FTP and FTPS, only Image/Binary mode is supported.

  • For FTP and FTPS, TLS - PROT C (unprotected) TLS for the data connection is the default but PROT C is not supported in the AWS Transfer Family FTPS protocol. So for FTPS, you need to issue PROT P for your data operation to be accepted.

  • If you are using Amazon S3 for your server's storage, and if your client contains an option to use multiple connections for a single transfer, make sure to disable the option. Otherwise, large file uploads can fail in unpredictable ways. Note that if you are using Amazon EFS as your storage backend, EFS does support multiple connections for a single transfer.

The following is a list of available commands for FTP and FTPS:

Available commands

ABOR

FEAT

MLST

PASS

RETR

STOR

AUTH

LANG

MKD

PASV

RMD

STOU

CDUP

LIST

MODE

PBSZ

RNFR

STRU

CWD

MDTM

NLST

PROT

RNTO

SYST

DELE

MFMT

NOOP

PWD

SIZE

TYPE

EPSV

MLSD

OPTS

QUIT

STAT

USER

Note

APPE is not supported.

For SFTP, the following operations are currently not supported for users that are using the logical home directory on servers that are using Amazon Elastic File System (Amazon EFS).

Unsupported SFTP commands

SSH_FXP_READLINK

SSH_FXP_SYMLINK

SSH_FXP_STAT when the requested file is a symlink

SSH_FXP_REALPATH when the requested path contains any symlink components

Generate public-private key pair

Before you can transfer a file, you must have a public-private key pair available. If you have not previously generated a key pair, see Generate SSH keys for service-managed users.

Available SFTP/FTPS/FTP Commands

The following table describes the available commands for AWS Transfer Family, for the SFTP, FTPS, and FTP protocols.

Note

The table mentions files and directories for Amazon S3, which only supports buckets and objects: there is no hierarchy. However, you can use prefixes in object key names to imply a hierarchy and organize your data in a way similar to folders. This behavior is described in Working with object metadata in the Amazon Simple Storage Service User Guide.

SFTP/FTPS/FTP Commands
Command Amazon S3 Amazon EFS
cd Supported Supported
chgrp Not supported Supported (root or owner only)
chmod Not supported Supported (root only)
chmtime Not supported Supported
chown Not supported Supported (root only)
get Supported Supported (including resolving symbolic links)
ln -s Not supported Supported
ls/dir Supported Supported
mkdir Supported Supported
put Supported Supported
pwd Supported Supported
rename

Supported for files only

Supported
Note

Renaming that would overwrite an existing file or directory is not supported.

rm Supported Supported
rmdir Supported (empty directories only) Supported
version Supported Supported

Find your Amazon VPC endpoint

If the endpoint type for your Transfer Family server is VPC, identifying the endpoint to use for transferring files is not straightforward. In this case, use the following procedure to find your Amazon VPC endpoint.

Find your Amazon VPC endpoint
  1. Navigate to your server's details page.

  2. In the Endpoint details pane, select the VPC.

    The Transfer Family console server details page, showing the Endpoint details for a VPC server.
  3. In the Amazon VPC dashboard, select the VPC endpoint ID.

  4. In the list of DNS names, your server endpoint is the first one listed.

    The Amazon VPC console Endpoints page, showing the DNS names for a selected endpoint.

Avoid setstat errors

Some SFTP file transfer clients can attempt to change the attributes of remote files, including timestamp and permissions, using commands, such as SETSTAT when uploading the file. However, these commands are not compatible with object storage systems, such as Amazon S3. Due to this incompatibility, file uploads from these clients can result in errors even when the file is otherwise successfully uploaded.

  • When you call the CreateServer or UpdateServer API, use the ProtocolDetails option SetStatOption to ignore the error that is generated when the client attempts to use SETSTAT on a file you are uploading to an S3 bucket.

  • Set the value to ENABLE_NO_OP to have the Transfer Family server ignore the SETSTAT command, and upload files without needing to make any changes to your SFTP client.

  • Note that while the SetStatOption ENABLE_NO_OP setting ignores the error, it does generate a log entry in CloudWatch Logs, so you can determine when the client is making a SETSTAT call.

For the API details for this option, see ProtocolDetails.

Use OpenSSH

Use the instructions that follow to transfer files from the command line using OpenSSH.

Note

This client works only with an SFTP-enabled server.

To transfer files over AWS Transfer Family using the OpenSSH command line utility
  1. On Linux, macOS, or Windows, open a command terminal.

  2. At the prompt, enter the following command:

    sftp -i transfer-key sftp_user@service_endpoint

    In the preceding command, sftp_user is the username and transfer-key is the SSH private key. Here, service_endpoint is the server's endpoint as shown in the AWS Transfer Family console for the selected server.

    Note

    This command uses settings that are in the default ssh_config file. Unless you have previously edited this file, SFTP uses port 22. You can specify a different port (for example 2222) by adding a -P flag to the command, as follows.

    sftp -P 2222 -i transfer-key sftp_user@service_endpoint

    Alternatively, if you always want to use port 2222 or port 22000, you can update your default port in your ssh_config file.

    An sftp prompt should appear.

  3. (Optional) To view the user's home directory, enter the following command at the sftp prompt:

    pwd

  4. To upload a file from your file system to the Transfer Family server, use the put command. For example, to upload hello.txt (assuming that file is in your current directory on your file system), run the following command at the sftp prompt:

    put hello.txt

    A message similar to the following appears, indicating that the file transfer is in progress, or complete.

    Uploading hello.txt to /my-bucket/home/sftp_user/hello.txt

    hello.txt 100% 127 0.1KB/s 00:00

Note

After your server is created, it can take a few minutes for the server endpoint hostname to be resolvable by the DNS service in your environment.

Use WinSCP

Use the instructions that follow to transfer files from the command line using WinSCP.

Note

If you are using WinSCP 5.19, you can directly connect to Amazon S3 using your AWS credentials and upload/download files. For more details, see Connecting to Amazon S3 service.

To transfer files over AWS Transfer Family using WinSCP
  1. Open the WinSCP client.

  2. In the Login dialog box, for File protocol, choose a protocol: SFTP or FTP.

    If you chose FTP, for Encryption, choose one of the following:

    • No encryption for FTP

    • TLS/SSL Explicit encryption for FTPS

  3. For Host name, enter your server endpoint. The server endpoint is located on the Server details page. For more information, see View SFTP, FTPS, and FTP server details.

    Note

    If your server uses a VPC endpoint, see Find your Amazon VPC endpoint.

  4. For Port number, enter the following:

    • 22 for SFTP

    • 21 for FTP/FTPS

  5. For User name, enter the name for the user that you created for your specific identity provider.

    Note

    The username should be one of the users you created or configured for your identity provider. AWS Transfer Family provides the following identity providers:

  6. Choose Advanced to open the Advanced Site Settings dialog box. In the SSH section, choose Authentication.

  7. For Private key file, browse for and choose the SSH private key file from your file system.

    Note

    If WinSCP offers to convert your SSH private key to the PPK format, choose OK.

  8. Choose OK to return to the Login dialog box, and then choose Save.

  9. In the Save session as site dialog box, choose OK to complete your connection setup.

  10. In the Login dialog box, choose Tools, and then choose Preferences.

  11. In the Preferences dialog box, for Transfer, choose Endurance.

    For the Enable transfer resume/transfer to temporary filename for option, choose Disable.

    Note

    If you leave this option enabled, it increases upload costs, substantially decreasing upload performance. It also can lead to failures of large file uploads.

  12. For Transfer, choose Background, and clear the Use multiple connections for single transfer check box.

    Note

    If you leave this option selected, large file uploads can fail in unpredictable ways. For example, orphaned multipart uploads that incur Amazon S3 charges can be created. Silent data corruption can also occur.

  13. Perform your file transfer.

    You can use drag-and-drop methods to copy files between the target and source windows. You can use toolbar icons to upload, download, delete, edit, or modify the properties of files in WinSCP.

Note

This note does not apply if you are using Amazon EFS for storage.

Commands that attempt to change attributes of remote files, including timestamps, are not compatible with object storage systems such as Amazon S3. Therefore, if you are using Amazon S3 for storage, be sure to disable WinSCP timestamp settings (or use the SetStatOption as described in Avoid setstat errors) before you perform file transfers. To do so, in the WinSCP Transfer settings dialog box, disable the Set permissions upload option and the Preserve timestamp common option.

Use Cyberduck

Use the instructions that follow to transfer files from the command line using Cyberduck.

To transfer files over AWS Transfer Family using Cyberduck
  1. Open the Cyberduck client.

  2. Choose Open Connection.

  3. In the Open Connection dialog box, choose a protocol: SFTP (SSH File Transfer Protocol), FTP-SSL (Explicit AUTH TLS), or FTP (File Transfer Protocol).

  4. For Server, enter your server endpoint. The server endpoint is located on the Server details page. For more information, see View SFTP, FTPS, and FTP server details.

    Note

    If your server uses a VPC endpoint, see Find your Amazon VPC endpoint.

  5. For Port number, enter the following:

    • 22 for SFTP

    • 21 for FTP/FTPS

  6. For Username, enter the name for the user that you created in Managing users for server endpoints.

  7. If SFTP is selected, for SSH Private Key, choose or enter the SSH private key.

  8. Choose Connect.

  9. Perform your file transfer.

    Depending on where your files are, do one of the following:

    • In your local directory (the source), choose the files that you want to transfer, and drag and drop them into the Amazon S3 directory (the target).

    • In the Amazon S3 directory (the source), choose the files that you want to transfer, and drag and drop them into your local directory (the target).

Use FileZilla

Use the instructions that follow to transfer files using FileZilla.

To set up FileZilla for a file transfer
  1. Open the FileZilla client.

  2. Choose File, and then choose Site Manager.

  3. In the Site Manager dialog box, choose New site.

  4. On the General tab, for Protocol, choose a protocol: SFTP or FTP.

    If you chose FTP, for Encryption, choose one of the following:

    • Only use plain FTP (insecure) – for FTP

    • Use explicit FTP over TLS if available – for FTPS

  5. For Host name, enter the protocol that you are using, followed by your server endpoint. The server endpoint is located on the Server details page. For more information, see View SFTP, FTPS, and FTP server details.

    Note

    If your server uses a VPC endpoint, see Find your Amazon VPC endpoint.

    • If you are using SFTP, enter: sftp://hostname

    • If you are using FTPS, enter: ftps://hostname

    Make sure to replace hostname with your actual server endpoint.

  6. For Port number, enter the following:

    • 22 for SFTP

    • 21 for FTP/FTPS

  7. If SFTP is selected, for Logon Type, choose Key file.

    For Key file, choose or enter the SSH private key.

  8. For User, enter the name for the user that you created in Managing users for server endpoints.

  9. Choose Connect.

  10. Perform your file transfer.

    Note

    If you interrupt a file transfer in progress, AWS Transfer Family might write a partial object in your Amazon S3 bucket. If you interrupt an upload, check that the file size in the Amazon S3 bucket matches the file size of the source object before continuing.

Use a Perl client

If you use the NET::SFTP::Foreign perl client, you must set the queue_size to 1. For example:

my $sftp = Net::SFTP::Foreign->new('user@s-12345.server.transfer.us-east-2.amazonaws.com', queue_size => 1);

Note

This workaround is needed for revisions of Net::SFTP::Foreign prior to 1.92.02.

Use LFTP

LFTP is a free FTP client that allows users to perform file transfers via the command-line interface from most Linux machines.

For large file downloads, LFTP has a known issue with out of order packets, causing the file transfer to fail.

Post upload processing

You can view post upload processing information including Amazon S3 object metadata and event notifications.

Amazon S3 object metadata

As a part of your object's metadata you see a key called x-amz-meta-user-agent whose value is AWSTransfer and x-amz-meta-user-agent-id whose value is username@server-id. The username is the Transfer Family user who uploaded the file and server-id is the server used for the upload. This information can be accessed using the HeadObject operation on the S3 object inside your Lambda function.

The Metadata screen displaying information about Amazon S3 object metadata for AWS Transfer Family.

Amazon S3 event notifications

When an object is uploaded to your S3 bucket using Transfer Family, RoleSessionName is contained in the Requester field in the S3 event notification structure as [AWS:Role Unique Identifier]/username.sessionid@server-id. For example, the following are the contents for a sample Requester field from an S3 access log for a file that was copied to the S3 bucket.

arn:aws:sts::AWS-Account-ID:assumed-role/IamRoleName/username.sessionid@server-id

In the Requester field above, it shows the IAM Role called IamRoleName. For more information about configuring S3 event notifications, see Configuring Amazon S3 event notifications in the Amazon Simple Storage Service Developer Guide. For more information about AWS Identity and Access Management (IAM) role unique identifiers, see Unique identifiers in the AWS Identity and Access Management User Guide.