Copy file Decrypt file Tag file Delete file Named variables for workflows Example tag and delete workflow

Use predefined steps

When you're creating a workflow, you can choose to add one of the following predefined steps discussed in this topic. You can also choose to add your own custom file-processing steps. For more information, see Use custom file-processing steps.

Copy file

A copy file step creates a copy of the uploaded file in a new Amazon S3 location. Currently, you can use a copy file step only with Amazon S3.

The following copy file step copies files into the test folder in amzn-s3-demo-destination-bucket.

If the copy file step is not the first step of your workflow, you can specify the File location. By specifying the file location, you can copy either the file that was used in the previous step or the original file that was uploaded. You can use this feature to make multiple copies of the original file while keeping the source file intact for file archival and records retention. For an example, see Example tag and delete workflow.

Workflow screen with Copy the file created from previous step... button selected.

Provide the bucket and key details

You must provide the bucket name and a key for the destination of the copy file step. The key can be either a path name or a file name. Whether the key is treated as a path name or a file name is determined by whether you end the key with the forward slash (/) character.

If the final character is /, your file is copied to the folder, and its name does not change. If the final character is alphanumeric, your uploaded file is renamed to the key value. In this case, if a file with that name already exists, the behavior depends on the setting for the Overwrite existing field.

If Overwrite existing is selected, the existing file is replaced with the file being processed.
If Overwrite existing is not selected, nothing happens, and the workflow processing stops.

Tip
If concurrent writes are executed on the same file path, it may result in unexpected behavior when overwriting files.

For example, if your key value is test/, your uploaded files are copied to the test folder. If your key value is test/today, (and Overwrite existing is selected) every file you upload is copied to a file named today in the test folder, and each succeeding file overwrites the previous one.

Note

Amazon S3 supports buckets and objects, and there is no hierarchy. However, you can use prefixes and delimiters in object key names to imply a hierarchy and organize your data in a way similar to folders.

Use a named variable in a copy file step

In a copy file step, you can use a variable to dynamically copy your files into user-specific folders. Currently, you can use ${transfer:UserName} or ${transfer:UploadDate} as a variable to copy files to a destination location for the given user who's uploading files, or based on the current date.

In the following example, if the user richard-roe uploads a file, it gets copied into the amzn-s3-demo-destination-bucket/richard-roe/processed/ folder. If the user mary-major uploads a file, it gets copied into the amzn-s3-demo-destination-bucket/mary-major/processed/ folder.

Parameter screen for a copy step, showing the bucket and the key, parameterized using UserName.

Similarly, you can use ${transfer:UploadDate} as a variable to copy files to a destination location named for the current date. In the following example, if you set the destination to ${transfer:UploadDate}/processed on February 1, 2022, files uploaded are copied into the amzn-s3-demo-destination-bucket/2022-02-01/processed/ folder.

Parameter screen for a copy step, showing the bucket and the key, parameterized using UploadDate.

You can also use both of these variables together, combining their functionality. For example, you could set the Destination key prefix to folder/${transfer:UserName}/${transfer:UploadDate}/, which would created nested folders, for example folder/marymajor/2023-01-05/.

IAM permissions for copy step

To allow a copy step to succeed, make sure the execution role for your workflow contains the following permissions.


{
            "Sid": "ListBucket",
            "Effect": "Allow",
            "Action": "s3:ListBucket",
            "Resource": [
                "arn:aws:s3:::amzn-s3-demo-destination-bucket"
            ]
        },
        {
            "Sid": "HomeDirObjectAccess",
            "Effect": "Allow",
            "Action": [
                "s3:PutObject",
                "s3:GetObject",
                "s3:DeleteObjectVersion",
                "s3:DeleteObject",
                "s3:GetObjectVersion"
            ],
            "Resource": "arn:aws:s3:::amzn-s3-demo-destination-bucket/*"
        }

Note

The s3:ListBucket permission is only necessary if you do not select Overwrite existing. This permission checks your bucket to see if a file with the same name already exists. If you have selected Overwrite existing, the workflow doesn't need to check for the file, and can just write it.

If your Amazon S3 files have tags, you need to add one or two permissions to your IAM policy.

Add s3:GetObjectTagging for an Amazon S3 file that isn't versioned.
Add s3:GetObjectVersionTagging for an Amazon S3 file that is versioned.

Decrypt file

The AWS storage blog has a post that describes how to simply decrypt files without writing any code using Transfer Family Managed workflows, Encrypt and decrypt files with PGP and AWS Transfer Family.

Supported symmetric encryption algorithms

For PGP decryption, Transfer Family supports the following symmetric encryption algorithms: IDEA, 3DES, CAST5, Blowfish, DES, AES-128, AES-192, AES-256, TwoFish, CAMELLIA-128, CAMELLIA-192, CAMELLIA-256

The FIPS-compliant symmetric encryption algorithms are AES-128, AES-192, AES-256, and 3DES.

Use PGP decryption in your workflow

Transfer Family has built-in support for Pretty Good Privacy (PGP) decryption. You can use PGP decryption on files that are uploaded over SFTP, FTPS, or FTP to Amazon Simple Storage Service (Amazon S3) or Amazon Elastic File System (Amazon EFS).

To use PGP decryption, you must create and store the PGP private keys that will be used for decryption of your files. Your users can then encrypt files by using corresponding PGP encryption keys before uploading the files to your Transfer Family server. After you receive the encrypted files, you can decrypt those files in your workflow. For a detailed tutorial, see Setting up a managed workflow for decrypting a file.

To use PGP decryption in your workflow

Identify a Transfer Family server to host your workflow, or create a new one. You need to have the server ID before you can store your PGP keys in AWS Secrets Manager with the correct secret name.
Store your PGP key in AWS Secrets Manager under the required secret name. For details, see Manage PGP keys. Workflows can automatically locate the correct PGP key to be used for decryption based on the secret name in Secrets Manager.

Note
When you store secrets in Secrets Manager, your AWS account incurs charges. For information about pricing, see AWS Secrets Manager Pricing.
Encrypt a file by using your PGP key pair. (For a list of supported clients, see Supported PGP clients.) If you are using the command line, run the following command. To use this command, replace username@example.com with the email address that you used to create the PGP key pair. Replace testfile.txt with the name of the file that you want to encrypt.
```
gpg -e -r username@example.com testfile.txt
```
Upload the encrypted file to your Transfer Family server.
Configure a decryption step in your workflow. For more information, see Add a decryption step.

Add a decryption step

A decryption step decrypts an encrypted file that was uploaded to Amazon S3 or Amazon EFS as part of your workflow. For details about configuring decryption, see Use PGP decryption in your workflow.

When you create your decryption step for a workflow, you must specify the destination for the decrypted files. You must also select whether to overwrite existing files if a file already exists at the destination location. You can monitor the decryption workflow results and get audit logs for each file in real time by using Amazon CloudWatch Logs.

After you choose the Decrypt file type for your step, the Configure parameters page appears. Fill in the values for the Configure PGP decryption parameters section.

The available options are as follows:

Step name – Enter a descriptive name for the step.
File location – By specifying the file location, you can decrypt either the file that was used in the previous step or the original file that was uploaded.

Note
This parameter is not available if this step is the first step of the workflow.
Destination for decrypted files – Choose an Amazon S3 bucket or an Amazon EFS file system as the destination for the decrypted file.
- If you choose Amazon S3, you must provide a destination bucket name and a destination key prefix. To parameterize the destination key prefix by username, enter ${transfer:UserName} for Destination key prefix. Similarly, to parameterize the destination key prefix by upload date, enter ${Transfer:UploadDate} for Destination key prefix.
- If you choose Amazon EFS, you must provide a destination file system and path.
Note
The storage option that you choose here must match the storage system that's used by the Transfer Family server with which this workflow is associated. Otherwise, you will receive an error when you attempt to run this workflow.
Overwrite existing – If you upload a file, and a file with the same filename already exists at the destination, the behavior depends on the setting for this parameter:
- If Overwrite existing is selected, the existing file is replaced with the file being processed.
- If Overwrite existing is not selected, nothing happens, and the workflow processing stops.
  
  Tip
  If concurrent writes are executed on the same file path, it may result in unexpected behavior when overwriting files.

The following screenshot shows an example of the options that you might choose for your decrypt file step.

The AWS Transfer Family console, showing the Configure PGP decryption parameters section with sample values.

IAM permissions for decrypt step

To allow a decrypt step to succeed, make sure the execution role for your workflow contains the following permissions.


{
            "Sid": "ListBucket",
            "Effect": "Allow",
            "Action": "s3:ListBucket",
            "Resource": [
                "arn:aws:s3:::amzn-s3-demo-destination-bucket"
            ]
        },
        {
            "Sid": "HomeDirObjectAccess",
            "Effect": "Allow",
            "Action": [
                "s3:PutObject",
                "s3:GetObject",
                "s3:DeleteObjectVersion",
                "s3:DeleteObject",
                "s3:GetObjectVersion"
            ],
            "Resource": "arn:aws:s3:::amzn-s3-demo-destination-bucket/*"
        },
        {
            "Sid": "Decrypt",
            "Effect": "Allow",
            "Action": [
                "secretsmanager:GetSecretValue",
            ],
            "Resource": "arn:aws:secretsmanager:region:account-id:secret:aws/transfer/*"
        }

Note

If your Amazon S3 files have tags, you need to add one or two permissions to your IAM policy.

Add s3:GetObjectTagging for an Amazon S3 file that isn't versioned.
Add s3:GetObjectVersionTagging for an Amazon S3 file that is versioned.

Tag file

To tag incoming files for further downstream processing, use a tag step. Enter the value of the tag that you would like to assign to the incoming files. Currently, the tag operation is supported only if you are using Amazon S3 for your Transfer Family server storage.

The following example tag step assigns scan_outcome and clean as the tag key and value, respectively.

Workflows screen showing the details for a tagging step.

To allow a tag step to succeed, make sure the execution role for your workflow contains the following permissions.


{
            "Sid": "Tag",
            "Effect": "Allow",
            "Action": [
                "s3:PutObjectTagging",
                "s3:PutObjectVersionTagging"
            ],
            "Resource": [
                "arn:aws:s3:::amzn-s3-demo-bucket/*"
            ]
}

Note

If your workflow contains a tag step that runs before either a copy or decrypt step, you need to add one or two permissions to your IAM policy.

Add s3:GetObjectTagging for an Amazon S3 file that isn't versioned.
Add s3:GetObjectVersionTagging for an Amazon S3 file that is versioned.

Delete file

To delete a processed file from a previous workflow step or to delete the originally uploaded file, use a delete file step.

Workflows screen showing the details for a delete step.

To allow a delete step to succeed, make sure the execution role for your workflow contains the following permissions.


{
            "Sid": "Delete",
            "Effect": "Allow",
            "Action": [
                "s3:DeleteObjectVersion",
                "s3:DeleteObject"
            ],
            "Resource": "arn:aws:secretsmanager:region:account-ID:secret:aws/transfer/*"
        }

Named variables for workflows

For copy and decrypt steps, you can use a variable to dynamically perform actions. Currently, AWS Transfer Family supports the following named variables.

Use ${transfer:UserName} to copy or decrypt files to a destination based on the user who's uploading the files.
Use ${transfer:UploadDate} to copy or decrypt files to a destination location based on the current date.

Example tag and delete workflow

The following example illustrates a workflow that tags incoming files that need to be processed by a downstream application, such as a data analytics platform. After tagging the incoming file, the workflow then deletes the originally uploaded file to save on storage costs.

Console

Example tag and move workflow

Open the AWS Transfer Family console at https://console.aws.amazon.com/transfer/.
In the left navigation pane, choose Workflows.
On the Workflows page, choose Create workflow.
On the Create workflow page, enter a description. This description appears on the Workflows page.
Add the first step (copy).
1. In the Nominal steps section, choose Add step.
2. Choose Copy file, then choose Next.
3. Enter a step name, then select a destination bucket and a key prefix.
4. Choose Next, then review the details for the step.
5. Choose Create step to add the step and continue.
Add the second step (tag).
1. In the Nominal steps section, choose Add step.
2. Choose Tag file, then choose Next.
3. Enter a step name.
4. For File location, select Tag the file created from previous step.
5. Enter a Key and Value.
6. Choose Next, then review the details for the step.
7. Choose Create step to add the step and continue.
Add the third step (delete).
1. In the Nominal steps section, choose Add step.
2. Choose Delete file, then choose Next.
3. Enter a step name.
4. For File location, select Delete the original source file.
5. Choose Next, then review the details for the step.
6. Choose Create step to add the step and continue.
Review the workflow configuration, and then choose Create workflow.

CLI

Example tag and move workflow

Save the following code into a file; for example, tagAndMoveWorkflow.json. Replace each user input placeholder with your own information.


[
   {
       "Type": "COPY",
       "CopyStepDetails": {
          "Name": "CopyStep",
          "DestinationFileLocation": {
             "S3FileLocation": {
                "Bucket": "amzn-s3-demo-bucket",
                "Key": "test/"
             }
          }
       }
   },
   {
       "Type": "TAG",
       "TagStepDetails": {
          "Name": "TagStep",
          "Tags": [
             {
                "Key": "name",
                "Value": "demo"
             }
          ],
          "SourceFileLocation": "${previous.file}"
       }
   },
   {
      "Type": "DELETE",
      "DeleteStepDetails":{
         "Name":"DeleteStep",
         "SourceFileLocation": "${original.file}"
      }
  }
]

The first step copies the uploaded file to a new Amazon S3 location. The second step adds a tag (key-value pair) to the file (previous.file) that was copied to the new location. And, finally, the third step deletes the original file (original.file).

Create a workflow from the saved file. Replace each user input placeholder with your own information.
```
aws transfer create-workflow --description "short-description" --steps file://path-to-file --region region-ID
```
For example:
```
aws transfer create-workflow --description "copy-tag-delete workflow" --steps file://tagAndMoveWorkflow.json --region us-east-1
```
Note
For more details about using files to load parameters, see How to load parameters from a file.
Update an existing server.

Note
This step assumes you already have a Transfer Family server and you want to associate a workflow with it. If not, see Configuring an SFTP, FTPS, or FTP server endpoint. Replace each user input placeholder with your own information.
```
aws transfer update-server --server-id server-ID --region region-ID 
  --workflow-details '{"OnUpload":[{ "WorkflowId": "workflow-ID","ExecutionRole": "execution-role-ARN"}]}'
```
For example:
```
aws transfer update-server --server-id s-1234567890abcdef0 --region us-east-2 
  --workflow-details '{"OnUpload":[{ "WorkflowId": "w-abcdef01234567890","ExecutionRole": "arn:aws:iam::111111111111:role/nikki-wolf-execution-role"}]}'
```

Warning Javascript is disabled or is unavailable in your browser.

To use the Amazon Web Services Documentation, Javascript must be enabled. Please refer to your browser's Help pages for instructions.

Document Conventions

Create a workflow

Use custom file-processing steps

Use predefined steps

Topics

Copy file

Provide the bucket and key details

Tip

Note

Use a named variable in a copy file step

IAM permissions for copy step

Note

Decrypt file

Supported symmetric encryption algorithms

Use PGP decryption in your workflow

To use PGP decryption in your workflow

Note

Add a decryption step

Note

Note

Tip

IAM permissions for decrypt step

Note

Tag file

Note

Delete file

Named variables for workflows

Example tag and delete workflow

Example tag and move workflow

Example tag and move workflow

Note

Note