VPC peering process, lifecycle, and limitations - Amazon Virtual Private Cloud
VPC peering connection lifecycleMultiple VPC peering connectionsVPC peering limitations

VPC peering process, lifecycle, and limitations

To establish a VPC peering connection, you do the following:

  1. The owner of the requester VPC sends a request to the owner of the accepter VPC to create the VPC peering connection. The accepter VPC can be owned by you, or another AWS account, and cannot have a CIDR block that overlaps with the CIDR block of the requester VPC.

  2. The owner of the accepter VPC accepts the VPC peering connection request to activate the VPC peering connection.

  3. To enable the flow of traffic between the VPCs using private IP addresses, the owner of each VPC in the VPC peering connection must manually add a route to one or more of their VPC route tables that points to the IP address range of the other VPC (the peer VPC).

  4. If required, update the security group rules that are associated with your EC2 instance to ensure that traffic to and from the peer VPC is not restricted. If both VPCs are in the same Region, you can reference a security group from the peer VPC as a source or destination for inbound or outbound rules in your security group.

  5. With the default VPC peering connection options, if EC2 instances on either side of a VPC peering connection address each other using a public DNS hostname, the hostname resolves to the public IP address of the EC2 instance. To change this behavior, enable DNS hostname resolution for your VPC connection. After enabling DNS hostname resolution, if EC2 instances on either side of the VPC peering connection address each other using a public DNS hostname, the hostname resolves to the private IP address of the EC2 instance.

For more information, see Work with VPC peering connections.

VPC peering connection lifecycle

A VPC peering connection goes through various stages starting from when the request is initiated. At each stage, there may be actions that you can take, and at the end of its lifecycle, the VPC peering connection remains visible in the Amazon VPC console and API or command line output for a period of time.

VPC peering connection lifecycle

  • Initiating-request: A request for a VPC peering connection has been initiated. At this stage, the peering connection can fail, or can go to pending-acceptance.

  • Failed: The request for the VPC peering connection has failed. While in this state, it cannot be accepted, rejected, or deleted. The failed VPC peering connection remains visible to the requester for 2 hours.

  • Pending-acceptance: The VPC peering connection request is awaiting acceptance from the owner of the accepter VPC. During this state, the owner of the requester VPC can delete the request, and the owner of the accepter VPC can accept or reject the request. If no action is taken on the request, it expires after 7 days.

  • Expired: The VPC peering connection request has expired, and no action can be taken on it by either VPC owner. The expired VPC peering connection remains visible to both VPC owners for 2 days.

  • Rejected: The owner of the accepter VPC has rejected a pending-acceptance VPC peering connection request. While in this state, the request cannot be accepted. The rejected VPC peering connection remains visible to the owner of the requester VPC for 2 days, and visible to the owner of the accepter VPC for 2 hours. If the request was created within the same AWS account, the rejected request remains visible for 2 hours.

  • Provisioning: The VPC peering connection request has been accepted, and will soon be in the active state.

  • Active: The VPC peering connection is active, and traffic can flow between the VPCs (provided that your security groups and route tables allow the flow of traffic). While in this state, either of the VPC owners can delete the VPC peering connection, but cannot reject it.

    Note

    If an event in a Region in which a VPC resides prevents the flow of traffic, the status of the VPC peering connection remains Active.

  • Deleting: Applies to an inter-Region VPC peering connection that is in the process of being deleted. The owner of either VPC has submitted a request to delete an active VPC peering connection, or the owner of the requester VPC has submitted a request to delete a pending-acceptance VPC peering connection request.

  • Deleted: An active VPC peering connection has been deleted by either of the VPC owners, or a pending-acceptance VPC peering connection request has been deleted by the owner of the requester VPC. While in this state, the VPC peering connection cannot be accepted or rejected. The VPC peering connection remains visible to the party that deleted it for 2 hours, and visible to the other party for 2 days. If the VPC peering connection was created within the same AWS account, the deleted request remains visible for 2 hours.

Multiple VPC peering connections

A VPC peering connection is a one to one relationship between two VPCs. You can create multiple VPC peering connections for each VPC that you own, but transitive peering relationships are not supported. You do not have any peering relationship with VPCs that your VPC is not directly peered with.

The following diagram is an example of one VPC peered to two different VPCs. There are two VPC peering connections: VPC A is peered with both VPC B and VPC C. VPC B and VPC C are not peered, and you cannot use VPC A as a transit point for peering between VPC B and VPC C. If you want to enable routing of traffic between VPC B and VPC C, you must create a unique VPC peering connection between them.

One VPC peered with two VPCs

VPC peering limitations

Consider the following limitations for VPC peering connections. In some cases, you can use a transit gateway attachment instead of a VPC peering connection. For more information, see Examples in Amazon VPC Transit Gateways.

Connections

  • There is a quota on the number of active and pending VPC peering connections per VPC. For more information, see VPC peering connection quotas for an account.

  • You cannot have more than one VPC peering connection between two VPCs at the same time.

  • Any tags that you create for your VPC peering connection are only applied in the account or Region in which you create them.

  • You cannot connect to or query the Amazon DNS server in a peer VPC.

  • If the IPv4 CIDR block of a VPC in a VPC peering connection falls outside of the private IPv4 address ranges specified by RFC 1918, private DNS hostnames for that VPC cannot be resolved to private IP addresses. To resolve private DNS hostnames to private IP addresses, you can enable DNS resolution support for the VPC peering connection. For more information, see Enable DNS resolution for a VPC peering connection.

  • You can enable resources on either side of a VPC peering connection to communicate over IPv6. You must associate an IPv6 CIDR block with each VPC, enable the instances in the VPCs for IPv6 communication, and route IPv6 traffic intended for the peer VPC to the VPC peering connection.

  • Unicast reverse path forwarding in VPC peering connections is not supported. For more information, see Routing for response traffic.

Overlapping CIDR blocks

  • You cannot create a VPC peering connection between VPCs that have matching or overlapping IPv4 or IPv6 CIDR blocks.

  • If you have multiple IPv4 CIDR blocks, you can't create a VPC peering connection if any of the CIDR blocks overlap, even if you intend to use only the non-overlapping CIDR blocks or only IPv6 CIDR blocks.

Transitive peering

  • VPC peering does not support transitive peering relationships. For example, if there are VPC peering connections between VPC A and VPC B, and between VPC A and VPC C, you can't route traffic from VPC B to VPC C through VPC A. To route traffic between VPC B and VPC C, you must create a VPC peering connection between them. For more information, see Three VPCs peered together.

Edge to edge routing through a gateway or private connection

  • If VPC A has an internet gateway, resources in VPC B can't use the internet gateway in VPC A to access the internet.

  • If VPC A has an NAT device that provides internet access to subnets in VPC A, resources in VPC B can't use the NAT device in VPC A to access the internet.

  • If VPC A has a VPN connection to a corporate network, resources in VPC B can't use the VPN connection to communicate with the corporate network.

  • If VPC A has an AWS Direct Connect connection to a corporate network, resources in VPC B can't use the AWS Direct Connect connection to communicate with the corporate network.

  • If VPC A has a gateway endpoint that provides connectivity to Amazon S3 to private subnets in VPC A, resources in VPC B can't use the gateway endpoint to access Amazon S3.

Inter-Region VPC peering connections

  • The Maximum Transmission Unit (MTU) across the VPC peering connection over Regions is 1500 bytes. Jumbo frames (MTUs up to 9001 bytes) are not supported for inter-Region VPC peering connections. They are, however, supported for VPC peering connections in the same Region. For more information about jumbo frames, see Jumbo frames (9001 MTU) in the Amazon EC2 User Guide.

  • You must enable DNS resolution support for the VPC peering connection to resolve private DNS hostnames of the peered VPC to private IP addresses, even if the IPv4 CIDR for the VPC falls into the private IPv4 address ranges specified by RFC 1918.

Shared VPCs and subnets

  • Only VPC owners can work with (describe, create, accept, reject, modify, or delete) peering connections. Participants cannot work with peering connections. For more information see, Share your VPC with other accounts in the Amazon VPC User Guide.