使用 AWS CLI 的 AWS Direct Connect示例 - AWS Command Line Interface
操作

本文档仅适用于 AWS CLI 版本 1。有关 AWS CLI 版本 2 的相关文档，请参阅版本 2 用户指南。

使用 AWS CLI 的 AWS Direct Connect示例

以下代码示例演示了如何通过将 AWS Command Line Interface与 AWS Direct Connect 结合使用，来执行操作和实现常见场景。

操作是大型程序的代码摘录，必须在上下文中运行。您可以通过操作了解如何调用单个服务函数，还可以通过函数相关场景的上下文查看操作。

每个示例都包含一个指向完整源代码的链接，您可以从中找到有关如何在上下文中设置和运行代码的说明。

主题

操作

以下代码示例演示如何使用 accept-direct-connect-gateway-association-proposal。

AWS CLI

接受网关关联提议

以下 accept-direct-connect-gateway-association-proposal 接受指定的提议。

aws directconnect  accept-direct-connect-gateway-association-proposal \
    --direct-connect-gateway-id 11460968-4ac1-4fd3-bdb2-00599EXAMPLE \
    --proposal-id cb7f41cb-8128-43a5-93b1-dcaedEXAMPLE \
    --associated-gateway-owner-account 111122223333

{
    "directConnectGatewayAssociation": {
        "directConnectGatewayId": "11460968-4ac1-4fd3-bdb2-00599EXAMPLE",
        "directConnectGatewayOwnerAccount": "111122223333",
        "associationState": "associating",
        "associatedGateway": {
            "id": "tgw-02f776b1a7EXAMPLE",
            "type": "transitGateway",
            "ownerAccount": "111122223333",
            "region": "us-east-1"
        },
        "associationId": "6441f8bf-5917-4279-ade1-9708bEXAMPLE",
        "allowedPrefixesToDirectConnectGateway": [
            {
                "cidr": "192.168.1.0/30"
            }
        ]
    }
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的接受或拒绝 Transit Gateway 关联提议。

以下代码示例演示如何使用 allocate-connection-on-interconnect。

AWS CLI

在互连上创建托管连接

以下 allocate-connection-on-interconnect 命令在互连上创建托管连接：

aws directconnect allocate-connection-on-interconnect --bandwidth 500Mbps --connection-name mydcinterconnect --owner-account 123456789012 --interconnect-id dxcon-fgktov66 --vlan 101

输出：

{
    "partnerName": "TIVIT",
    "vlan": 101,
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-ffzc51m1",
    "connectionState": "ordering",
    "bandwidth": "500Mbps",
    "location": "TIVIT",
    "connectionName": "mydcinterconnect",
    "region": "sa-east-1"
}

以下代码示例演示如何使用 allocate-hosted-connection。

AWS CLI

在互连上创建托管连接

以下 allocate-hosted-connection 示例在指定互连上创建托管连接。

aws directconnect allocate-hosted-connection \
    --bandwidth 500Mbps \
    --connection-name mydcinterconnect \
    --owner-account 123456789012
    -connection-id dxcon-fgktov66
    -vlan 101

输出：

{
    "partnerName": "TIVIT",
    "vlan": 101,
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-ffzc51m1",
    "connectionState": "ordering",
    "bandwidth": "500Mbps",
    "location": "TIVIT",
    "connectionName": "mydcinterconnect",
    "region": "sa-east-1"
}

以下代码示例演示如何使用 allocate-private-virtual-interface。

AWS CLI

预置私有虚拟接口

以下 allocate-private-virtual-interface 命令预置由不同客户拥有的私有虚拟接口。

aws directconnect allocate-private-virtual-interface --connection-id dxcon-ffjrkx17 --owner-account 123456789012 --new-private-virtual-interface-allocation virtualInterfaceName=PrivateVirtualInterface,vlan=1000,asn=65000,authKey=asdf34example,amazonAddress=192.168.1.1/30,customerAddress=192.168.1.2/30

输出：

{
    "virtualInterfaceState": "confirming",
    "asn": 65000,
    "vlan": 1000,
    "customerAddress": "192.168.1.2/30",
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-ffjrkx17",
    "virtualInterfaceId": "dxvif-fgy8orxu",
    "authKey": "asdf34example",
    "routeFilterPrefixes": [],
    "location": "TIVIT",
    "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n  <logical_connection id=\"dxvif-fgy8orxu\">\n  <vlan>1000</vlan>\n  <customer_address>192.168.1.2/30</customer_address>\n  <amazon_address>192.168.1.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>asdf34example</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>private</connection_type>\n</logical_connection>\n",
    "amazonAddress": "192.168.1.1/30",
    "virtualInterfaceType": "private",
    "virtualInterfaceName": "PrivateVirtualInterface"
}

以下代码示例演示如何使用 allocate-public-virtual-interface。

AWS CLI

预置公有虚拟接口

以下 allocate-public-virtual-interface 命令预置由不同客户拥有的公有虚拟接口。

aws directconnect allocate-public-virtual-interface --connection-id dxcon-ffjrkx17 --owner-account 123456789012 --new-public-virtual-interface-allocation virtualInterfaceName=PublicVirtualInterface,vlan=2000,asn=65000,authKey=asdf34example,amazonAddress=203.0.113.1/30,customerAddress=203.0.113.2/30,routeFilterPrefixes=[{cidr=203.0.113.0/30},{cidr=203.0.113.4/30}]

输出：

{
    "virtualInterfaceState": "confirming",
    "asn": 65000,
    "vlan": 2000,
    "customerAddress": "203.0.113.2/30",
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-ffjrkx17",
    "virtualInterfaceId": "dxvif-fg9xo9vp",
    "authKey": "asdf34example",
    "routeFilterPrefixes": [
        {
            "cidr": "203.0.113.0/30"
        },
        {
            "cidr": "203.0.113.4/30"
        }
    ],
    "location": "TIVIT",
    "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fg9xo9vp\">\n  <vlan>2000</vlan>\n  <customer_address>203.0.113.2/30</customer_address>\n  <amazon_address>203.0.113.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>asdf34example</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>public</connection_type>\n</logical_connection>\n",
    "amazonAddress": "203.0.113.1/30",
    "virtualInterfaceType": "public",
    "virtualInterfaceName": "PublicVirtualInterface"
}

以下代码示例演示如何使用 allocate-transit-virtual-interface。

AWS CLI

预置由指定 AWS 账户拥有的中转虚拟接口

以下 allocate-transit-virtual-interface 示例为指定账户预置中转虚拟接口。

aws directconnect allocate-transit-virtual-interface \
    --connection-id dxlag-fEXAMPLE \
    --owner-account 123456789012 \
    --new-transit-virtual-interface-allocation "virtualInterfaceName=Example Transit Virtual Interface,vlan=126,asn=65110,mtu=1500,authKey=0xzxgA9YoW9h58u8SEXAMPLE,amazonAddress=192.168.1.1/30,customerAddress=192.168.1.2/30,addressFamily=ipv4,tags=[{key=Tag,value=Example}]"

输出：

{
    "virtualInterface": {
        "ownerAccount": "123456789012",
        "virtualInterfaceId": "dxvif-fEXAMPLE",
        "location": "loc1",
        "connectionId": "dxlag-fEXAMPLE",
        "virtualInterfaceType": "transit",
        "virtualInterfaceName": "Example Transit Virtual Interface",
        "vlan": 126,
        "asn": 65110,
        "amazonSideAsn": 7224,
        "authKey": "0xzxgA9YoW9h58u8SEXAMPLE",
        "amazonAddress": "192.168.1.1/30",
        "customerAddress": "192.168.1.2/30",
        "addressFamily": "ipv4",
        "virtualInterfaceState": "confirming",
        "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fEXAMPLE\">\n  <vlan>126</vlan>\n  <customer_address>192.168.1.2/30</customer_address>\n  <amazon_address>192.168.1.1/30</amazon_address>\n  <bgp_asn>65110</bgp_asn>\n  <bgp_auth_key>0xzxgA9YoW9h58u8SEXAMPLE</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>transit</connection_type>\n</logical_connection>\n",
        "mtu": 1500,
        "jumboFrameCapable": true,
        "virtualGatewayId": "",
        "directConnectGatewayId": "",
        "routeFilterPrefixes": [],
        "bgpPeers": [
            {
                "bgpPeerId": "dxpeer-fEXAMPLE",
                "asn": 65110,
                "authKey": "0xzxgA9YoW9h58u8EXAMPLE",
                "addressFamily": "ipv4",
                "amazonAddress": "192.168.1.1/30",
                "customerAddress": "192.168.1.2/30",
                "bgpPeerState": "pending",
                "bgpStatus": "down",
                "awsDeviceV2": "loc1-26wz6vEXAMPLE"
            }
        ],
        "region": "sa-east-1",
        "awsDeviceV2": "loc1-26wz6vEXAMPLE",
        "tags": [
            {
                "key": "Tag",
                "value": "Example"
            }
        ]
    }
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的创建托管中转虚拟接口。

以下代码示例演示如何使用 associate-connection-with-lag。

AWS CLI

将连接与 LAG 关联

以下示例将指定连接与指定 LAG 关联。

命令:

aws directconnect associate-connection-with-lag --lag-id dxlag-fhccu14t --connection-id dxcon-fg9607vm

输出：

{
  "ownerAccount": "123456789012",
  "connectionId": "dxcon-fg9607vm",
  "lagId": "dxlag-fhccu14t",
  "connectionState": "requested",
  "bandwidth": "1Gbps",
  "location": "EqDC2",
  "connectionName": "Con2ForLag",
  "region": "us-east-1"
}

以下代码示例演示如何使用 associate-hosted-connection。

AWS CLI

将托管连接与 LAG 关联

以下示例将指定托管连接与指定 LAG 关联。

命令:

aws directconnect associate-hosted-connection --parent-connection-id dxlag-fhccu14t --connection-id dxcon-fg9607vm

输出：

{
  "partnerName": "TIVIT",
  "vlan": 101,
  "ownerAccount": "123456789012",
  "connectionId": "dxcon-fg9607vm",
  "lagId": "dxlag-fhccu14t",
  "connectionState": "ordering",
  "bandwidth": "500Mbps",
  "location": "TIVIT",
  "connectionName": "mydcinterconnect",
  "region": "sa-east-1"
}

以下代码示例演示如何使用 associate-virtual-interface。

AWS CLI

将虚拟接口与连接关联

以下示例将指定虚拟接口与指定 LAG 关联。或者，要将虚拟接口与连接关联，请指定 --connection-id 的 AWS Direct Connect 连接 ID，例如，dxcon-ffnikghc。

命令:

aws directconnect associate-virtual-interface --connection-id dxlag-ffjhj9lx --virtual-interface-id dxvif-fgputw0j

输出：

{
  "virtualInterfaceState": "pending",
  "asn": 65000,
  "vlan": 123,
  "customerAddress": "169.254.255.2/30",
  "ownerAccount": "123456789012",
  "connectionId": "dxlag-ffjhj9lx",
  "addressFamily": "ipv4",
  "virtualGatewayId": "vgw-38e90b51",
  "virtualInterfaceId": "dxvif-fgputw0j",
  "authKey": "0x123pK5_VBqv.UQ3kJ4123_",
  "routeFilterPrefixes": [],
  "location": "CSVA1",
  "bgpPeers": [
      {
          "bgpStatus": "down",
          "customerAddress": "169.254.255.2/30",
          "addressFamily": "ipv4",
          "authKey": "0x123pK5_VBqv.UQ3kJ4123_",
          "bgpPeerState": "deleting",
          "amazonAddress": "169.254.255.1/30",
          "asn": 65000
      },
      {
          "bgpStatus": "down",
          "customerAddress": "169.254.255.2/30",
          "addressFamily": "ipv4",
          "authKey": "0x123pK5_VBqv.UQ3kJ4123_",
          "bgpPeerState": "pending",
          "amazonAddress": "169.254.255.1/30",
          "asn": 65000
      }
  ],
  "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fgputw0j\">\n  <vlan>123</vlan>\n  <customer_address>169.254.255.2/30</customer_address>\n  <amazon_address>169.254.255.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>0x123pK5_VBqv.UQ3kJ4123_</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>private</connection_type>\n</logical_connection>\n",
  "amazonAddress": "169.254.255.1/30",
  "virtualInterfaceType": "private",
  "virtualInterfaceName": "VIF1A"
}

以下代码示例演示如何使用 confirm-connection。

AWS CLI

确认在互连上创建托管连接

以下 confirm-connection 命令确认在互连上创建托管连接：

aws directconnect confirm-connection --connection-id dxcon-fg2wi7hy

输出：

{
    "connectionState": "pending"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 ConfirmConnection。

以下代码示例演示如何使用 confirm-private-virtual-interface。

AWS CLI

接受私有虚拟接口的所有权

以下 confirm-private-virtual-interface 命令接受其他客户创建的私有虚拟接口的所有权。

aws directconnect confirm-private-virtual-interface --virtual-interface-id dxvif-fgy8orxu --virtual-gateway-id vgw-e4a47df9

输出：

{
    "virtualInterfaceState": "pending"
}

以下代码示例演示如何使用 confirm-public-virtual-interface。

AWS CLI

接受公有虚拟接口的所有权

以下 confirm-public-virtual-interface 命令接受其他客户创建的公有虚拟接口的所有权。

aws directconnect confirm-public-virtual-interface --virtual-interface-id dxvif-fg9xo9vp

输出：

{
    "virtualInterfaceState": "verifying"
}

以下代码示例演示如何使用 confirm-transit-virtual-interface。

AWS CLI

接受中转虚拟接口的所有权

以下 confirm-transit-virtual-interface 接受其他客户创建的中转虚拟接口的所有权。

aws directconnect confirm-transit-virtual-interface \
    --virtual-interface-id dxvif-fEXAMPLE \
    --direct-connect-gateway-id 4112ccf9-25e9-4111-8237-b6c5dEXAMPLE

输出：

{
    "virtualInterfaceState": "pending"
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的接受托管的虚拟接口。

以下代码示例演示如何使用 create-bgp-peer。

AWS CLI

创建 IPv6 BGP 对等会话

以下示例在私有虚拟接口 dxvif-fg1vuj3d 上创建 IPv6 BGP 对等会话。对等 IPv6 地址由 Amazon 自动分配。

命令:

aws directconnect create-bgp-peer --virtual-interface-id dxvif-fg1vuj3d --new-bgp-peer asn=64600,addressFamily=ipv6

输出：

{
  "virtualInterface": {
      "virtualInterfaceState": "available",
      "asn": 65000,
      "vlan": 125,
      "customerAddress": "169.254.255.2/30",
      "ownerAccount": "123456789012",
      "connectionId": "dxcon-fguhmqlc",
      "addressFamily": "ipv4",
      "virtualGatewayId": "vgw-f9eb0c90",
      "virtualInterfaceId": "dxvif-fg1vuj3d",
      "authKey": "0xC_ukbCerl6EYA0example",
      "routeFilterPrefixes": [],
      "location": "EqDC2",
      "bgpPeers": [
          {
              "bgpStatus": "down",
              "customerAddress": "169.254.255.2/30",
              "addressFamily": "ipv4",
              "authKey": "0xC_ukbCerl6EYA0uexample",
              "bgpPeerState": "available",
              "amazonAddress": "169.254.255.1/30",
              "asn": 65000
          },
          {
              "bgpStatus": "down",
              "customerAddress": "2001:db8:1100:2f0:0:1:9cb4:4216/125",
              "addressFamily": "ipv6",
              "authKey": "0xS27kAIU_VHPjjAexample",
              "bgpPeerState": "pending",
              "amazonAddress": "2001:db8:1100:2f0:0:1:9cb4:4211/125",
              "asn": 64600
          }
      ],
      "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fg1vuj3d\">\n  <vlan>125</vlan>\n  <customer_address>169.254.255.2/30</customer_address>\n  <amazon_address>169.254.255.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>0xC_ukbCerl6EYA0uexample</bgp_auth_key>\n  <ipv6_customer_address>2001:db8:1100:2f0:0:1:9cb4:4216/125</ipv6_customer_address>\n  <ipv6_amazon_address>2001:db8:1100:2f0:0:1:9cb4:4211/125</ipv6_amazon_address>\n  <ipv6_bgp_asn>64600</ipv6_bgp_asn>\n  <ipv6_bgp_auth_key>0xS27kAIU_VHPjjAexample</ipv6_bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>private</connection_type>\n</logical_connection>\n",
      "amazonAddress": "169.254.255.1/30",
      "virtualInterfaceType": "private",
      "virtualInterfaceName": "Test"
  }
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 CreateBgpPeer。

以下代码示例演示如何使用 create-connection。

AWS CLI

创建从您的网络到 AWS Direct Connect 位置的连接

以下 create-connection 命令创建从您的网络到 AWS Direct Connect 位置的连接：

aws directconnect create-connection --location TIVIT --bandwidth 1Gbps --connection-name "Connection to AWS"

输出：

{
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-fg31dyv6",
    "connectionState": "requested",
    "bandwidth": "1Gbps",
    "location": "TIVIT",
    "connectionName": "Connection to AWS",
    "region": "sa-east-1"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 CreateConnection。

以下代码示例演示如何使用 create-direct-connect-gateway-association-proposal。

AWS CLI

创建提议以将指定的中转网关与指定的 Direct Connect 网关关联

以下 create-direct-connect-gateway-association-proposal 示例创建提议以将指定的中转网关与指定的 Direct Connect 网关关联。

aws directconnect create-direct-connect-gateway-association-proposal \
    --direct-connect-gateway-id 11460968-4ac1-4fd3-bdb2-00599EXAMPLE \
    --direct-connect-gateway-owner-account 111122223333 \
    --gateway-id tgw-02f776b1a7EXAMPLE \
    --add-allowed-prefixes-to-direct-connect-gateway cidr=192.168.1.0/30

输出：

{
    "directConnectGatewayAssociationProposal": {
        "proposalId": "cb7f41cb-8128-43a5-93b1-dcaedEXAMPLE",
        "directConnectGatewayId": "11460968-4ac1-4fd3-bdb2-00599EXAMPLE",
        "directConnectGatewayOwnerAccount": "111122223333",
        "proposalState": "requested",
        "associatedGateway": {
            "id": "tgw-02f776b1a7EXAMPLE",
            "type": "transitGateway",
            "ownerAccount": "111122223333",
            "region": "us-east-1"
        },
        "requestedAllowedPrefixesToDirectConnectGateway": [
            {
                "cidr": "192.168.1.0/30"
            }
        ]
    }
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的创建 Transit Gateway 关联提议。

以下代码示例演示如何使用 create-direct-connect-gateway-association。

AWS CLI

将虚拟专用网关与 Direct Connect 网关关联

以下示例将虚拟专用网关 vgw-6efe725e 与 Direct Connect 网关 5f294f92-bafb-4011-916d-9b0bexample 关联。您必须在虚拟专用网关所在的区域中运行该命令。

命令:

aws directconnect create-direct-connect-gateway-association --direct-connect-gateway-id 5f294f92-bafb-4011-916d-9b0bexample --virtual-gateway-id vgw-6efe725e

输出：

{
  "directConnectGatewayAssociation": {
      "associationState": "associating",
      "virtualGatewayOwnerAccount": "123456789012",
      "directConnectGatewayId": "5f294f92-bafb-4011-916d-9b0bexample",
      "virtualGatewayId": "vgw-6efe725e",
      "virtualGatewayRegion": "us-east-2"
  }
}

以下代码示例演示如何使用 create-direct-connect-gateway。

AWS CLI

创建 Direct Connect 网关

以下示例创建名为 DxGateway1 的 Direct Connect 网关。

命令:

aws directconnect create-direct-connect-gateway --direct-connect-gateway-name "DxGateway1"

输出：

{
  "directConnectGateway": {
      "amazonSideAsn": 64512,
      "directConnectGatewayId": "5f294f92-bafb-4011-916d-9b0bdexample",
      "ownerAccount": "123456789012",
      "directConnectGatewayName": "DxGateway1",
      "directConnectGatewayState": "available"
  }
}

以下代码示例演示如何使用 create-interconnect。

AWS CLI

在合作伙伴的网络和 AWS 之间创建互连

以下 create-interconnect 命令在 AWS Direct Connect 合作伙伴网络与指定 AWS Direct Connect 位置之间创建新互连。

aws directconnect create-interconnect --interconnect-name "1G Interconnect to AWS" --bandwidth 1Gbps --location TIVIT

输出：

{
    "region": "sa-east-1",
    "bandwidth": "1Gbps",
    "location": "TIVIT",
    "interconnectName": "1G Interconnect to AWS",
    "interconnectId": "dxcon-fgktov66",
    "interconnectState": "requested"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 CreateInterconnect。

以下代码示例演示如何使用 create-lag。

AWS CLI

创建带有新连接的 LAG

以下示例创建一个 LAG，并为 LAG 请求两个带宽为 1 Gbps 的新 AWS Direct Connect 连接。

命令:

aws directconnect create-lag --location CSVA1 --number-of-connections 2 --connections-bandwidth 1Gbps --lag-name 1GBLag

输出：

{
  "awsDevice": "CSVA1-23u8tlpaz8iks",
  "numberOfConnections": 2,
  "lagState": "pending",
  "ownerAccount": "123456789012",
  "lagName": "1GBLag",
  "connections": [
      {
          "ownerAccount": "123456789012",
          "connectionId": "dxcon-ffqr6x5q",
          "lagId": "dxlag-ffjhj9lx",
          "connectionState": "requested",
          "bandwidth": "1Gbps",
          "location": "CSVA1",
          "connectionName": "Requested Connection 1 for Lag dxlag-ffjhj9lx",
          "region": "us-east-1"
      },
      {
          "ownerAccount": "123456789012",
          "connectionId": "dxcon-fflqyj95",
          "lagId": "dxlag-ffjhj9lx",
          "connectionState": "requested",
          "bandwidth": "1Gbps",
          "location": "CSVA1",
          "connectionName": "Requested Connection 2 for Lag dxlag-ffjhj9lx",
          "region": "us-east-1"
      }
  ],
  "lagId": "dxlag-ffjhj9lx",
  "minimumLinks": 0,
  "connectionsBandwidth": "1Gbps",
  "region": "us-east-1",
  "location": "CSVA1"
}

使用现有连接创建 LAG

以下示例使用您账户中的现有连接创建 LAG，并请求使用与现有连接相同的带宽和位置为 LAG 创建第二个新连接。

命令:

aws directconnect create-lag --location EqDC2 --number-of-connections 2 --connections-bandwidth 1Gbps --lag-name 2ConnLAG --connection-id dxcon-fgk145dr

输出：

{
  "awsDevice": "EqDC2-4h6ce2r1bes6",
  "numberOfConnections": 2,
  "lagState": "pending",
  "ownerAccount": "123456789012",
  "lagName": "2ConnLAG",
  "connections": [
      {
          "ownerAccount": "123456789012",
          "connectionId": "dxcon-fh6ljcvo",
          "lagId": "dxlag-fhccu14t",
          "connectionState": "requested",
          "bandwidth": "1Gbps",
          "location": "EqDC2",
          "connectionName": "Requested Connection 1 for Lag dxlag-fhccu14t",
          "region": "us-east-1"
      },
      {
          "ownerAccount": "123456789012",
          "connectionId": "dxcon-fgk145dr",
          "lagId": "dxlag-fhccu14t",
          "connectionState": "down",
          "bandwidth": "1Gbps",
          "location": "EqDC2",
          "connectionName": "VAConn1",
          "region": "us-east-1"
      }
  ],
  "lagId": "dxlag-fhccu14t",
  "minimumLinks": 0,
  "connectionsBandwidth": "1Gbps",
  "region": "us-east-1",
  "location": "EqDC2"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 CreateLag。

以下代码示例演示如何使用 create-private-virtual-interface。

AWS CLI

创建私有虚拟接口

以下 create-private-virtual-interface 命令创建私有虚拟接口：

aws directconnect create-private-virtual-interface --connection-id dxcon-ffjrkx17 --new-private-virtual-interface virtualInterfaceName=PrivateVirtualInterface,vlan=101,asn=65000,authKey=asdf34example,amazonAddress=192.168.1.1/30,customerAddress=192.168.1.2/30,virtualGatewayId=vgw-aba37db6

输出：

{
    "virtualInterfaceState": "pending",
    "asn": 65000,
    "vlan": 101,
    "customerAddress": "192.168.1.2/30",
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-ffjrkx17",
    "virtualGatewayId": "vgw-aba37db6",
    "virtualInterfaceId": "dxvif-ffhhk74f",
    "authKey": "asdf34example",
    "routeFilterPrefixes": [],
    "location": "TIVIT",
    "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-ffhhk74f\">\n  <vlan>101</vlan>\n  <customer_address>192.168.1.2/30</customer_address>\n  <amazon_address>192.168.1.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>asdf34example</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>private</connection_type>\n</logical_connection>\n",
    "amazonAddress": "192.168.1.1/30",
    "virtualInterfaceType": "private",
    "virtualInterfaceName": "PrivateVirtualInterface"
}

以下代码示例演示如何使用 create-public-virtual-interface。

AWS CLI

创建公有虚拟接口

以下 create-public-virtual-interface 命令创建公有虚拟接口：

aws directconnect create-public-virtual-interface --connection-id dxcon-ffjrkx17 --new-public-virtual-interface virtualInterfaceName=PublicVirtualInterface,vlan=2000,asn=65000,authKey=asdf34example,amazonAddress=203.0.113.1/30,customerAddress=203.0.113.2/30,routeFilterPrefixes=[{cidr=203.0.113.0/30},{cidr=203.0.113.4/30}]

输出：

{
    "virtualInterfaceState": "verifying",
    "asn": 65000,
    "vlan": 2000,
    "customerAddress": "203.0.113.2/30",
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-ffjrkx17",
    "virtualInterfaceId": "dxvif-fgh0hcrk",
    "authKey": "asdf34example",
    "routeFilterPrefixes": [
        {
            "cidr": "203.0.113.0/30"
        },
        {
            "cidr": "203.0.113.4/30"
        }
    ],
    "location": "TIVIT",
    "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fgh0hcrk\">\n  <vlan>2000</vlan>\n  <customer_address>203.0.113.2/30</customer_address>\n  <amazon_address>203.0.113.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>asdf34example</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>public</connection_type>\n</logical_connection>\n",
    "amazonAddress": "203.0.113.1/30",
    "virtualInterfaceType": "public",
    "virtualInterfaceName": "PublicVirtualInterface"
}

以下代码示例演示如何使用 create-transit-virtual-interface。

AWS CLI

创建中转虚拟接口

以下 create-transit-virtual-interface 示例为指定连接创建中转虚拟接口。

aws directconnect create-transit-virtual-interface \
    --connection-id dxlag-fEXAMPLE \
    --new-transit-virtual-interface "virtualInterfaceName=Example Transit Virtual Interface,vlan=126,asn=65110,mtu=1500,authKey=0xzxgA9YoW9h58u8SvEXAMPLE,amazonAddress=192.168.1.1/30,customerAddress=192.168.1.2/30,addressFamily=ipv4,directConnectGatewayId=8384da05-13ce-4a91-aada-5a1baEXAMPLE,tags=[{key=Tag,value=Example}]"

输出：

{
    "virtualInterface": {
        "ownerAccount": "1111222233333",
        "virtualInterfaceId": "dxvif-fEXAMPLE",
        "location": "loc1",
        "connectionId": "dxlag-fEXAMPLE",
        "virtualInterfaceType": "transit",
        "virtualInterfaceName": "Example Transit Virtual Interface",
        "vlan": 126,
        "asn": 65110,
        "amazonSideAsn": 4200000000,
        "authKey": "0xzxgA9YoW9h58u8SEXAMPLE",
        "amazonAddress": "192.168.1.1/30",
        "customerAddress": "192.168.1.2/30",
        "addressFamily": "ipv4",
        "virtualInterfaceState": "pending",
        "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fEXAMPLE\">\n  <vlan>126</vlan>\n  <customer_address>192.168.1.2/30</customer_address>\n  <amazon_address>192.168.1.1/30</amazon_address>\n  <bgp_asn>65110</bgp_asn>\n  <bgp_auth_key>0xzxgA9YoW9h58u8SvOmXRTw</bgp_auth_key>\n  <amazon_bgp_asn>4200000000</amazon_bgp_asn>\n  <connection_type>transit</connection_type>\n</logical_connection>\n",
        "mtu": 1500,
        "jumboFrameCapable": true,
        "virtualGatewayId": "",
        "directConnectGatewayId": "8384da05-13ce-4a91-aada-5a1baEXAMPLE",
        "routeFilterPrefixes": [],
        "bgpPeers": [
            {
                "bgpPeerId": "dxpeer-EXAMPLE",
                "asn": 65110,
                "authKey": "0xzxgA9YoW9h58u8SEXAMPLE",
                "addressFamily": "ipv4",
                "amazonAddress": "192.168.1.1/30",
                "customerAddress": "192.168.1.2/30",
                "bgpPeerState": "pending",
                "bgpStatus": "down",
                "awsDeviceV2": "loc1-26wz6vEXAMPLE"
            }
        ],
        "region": "sa-east-1",
        "awsDeviceV2": "loc1-26wz6vEXAMPLE",
        "tags": [
            {
                "key": "Tag",
                "value": "Example"
            }
        ]
    }
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的创建 Direct Connect 网关的中转虚拟接口。

以下代码示例演示如何使用 delete-bgp-peer。

AWS CLI

从虚拟接口删除 BGP 对等体

以下示例从虚拟接口 dxvif-fg1vuj3d 删除 IPv6 BGP 对等体。

命令:

aws directconnect delete-bgp-peer --virtual-interface-id dxvif-fg1vuj3d --asn 64600 --customer-address 2001:db8:1100:2f0:0:1:9cb4:4216/125

输出：

{
  "virtualInterface": {
      "virtualInterfaceState": "available",
      "asn": 65000,
      "vlan": 125,
      "customerAddress": "169.254.255.2/30",
      "ownerAccount": "123456789012",
      "connectionId": "dxcon-fguhmqlc",
      "addressFamily": "ipv4",
      "virtualGatewayId": "vgw-f9eb0c90",
      "virtualInterfaceId": "dxvif-fg1vuj3d",
      "authKey": "0xC_ukbCerl6EYA0example",
      "routeFilterPrefixes": [],
      "location": "EqDC2",
      "bgpPeers": [
          {
              "bgpStatus": "down",
              "customerAddress": "169.254.255.2/30",
              "addressFamily": "ipv4",
              "authKey": "0xC_ukbCerl6EYA0uexample",
              "bgpPeerState": "available",
              "amazonAddress": "169.254.255.1/30",
              "asn": 65000
          },
          {
              "bgpStatus": "down",
              "customerAddress": "2001:db8:1100:2f0:0:1:9cb4:4216/125",
              "addressFamily": "ipv6",
              "authKey": "0xS27kAIU_VHPjjAexample",
              "bgpPeerState": "deleting",
              "amazonAddress": "2001:db8:1100:2f0:0:1:9cb4:4211/125",
              "asn": 64600
          }
      ],
      "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fg1vuj3d\">\n  <vlan>125</vlan>\n  <customer_address>169.254.255.2/30</customer_address>\n  <amazon_address>169.254.255.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>0xC_ukbCerl6EYA0example</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>private</connection_type>\n</logical_connection>\n",
      "amazonAddress": "169.254.255.1/30",
      "virtualInterfaceType": "private",
      "virtualInterfaceName": "Test"
  }
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DeleteBgpPeer。

以下代码示例演示如何使用 delete-connection。

AWS CLI

删除连接

以下 delete-connection 命令删除指定的连接。

aws directconnect delete-connection --connection-id dxcon-fg31dyv6

输出：

{
    "ownerAccount": "123456789012",
    "connectionId": "dxcon-fg31dyv6",
    "connectionState": "deleted",
    "bandwidth": "1Gbps",
    "location": "TIVIT",
    "connectionName": "Connection to AWS",
    "region": "sa-east-1"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DeleteConnection。

以下代码示例演示如何使用 delete-direct-connect-gateway-association。

AWS CLI

删除 Direct Connect 网关关联

以下 delete-direct-connect-gateway-association 示例删除与具有指定关联 ID 的中转网关的 Direct Connect 网关关联。

aws directconnect delete-direct-connect-gateway-association --association-id  be85116d-46eb-4b43-a27a-da0c2ad648de

输出：

{
    "directConnectGatewayAssociation": {
        "directConnectGatewayId": "11460968-4ac1-4fd3-bdb2-00599EXAMPlE",
        "directConnectGatewayOwnerAccount": "123456789012",
        "associationState": "disassociating",
        "associatedGateway": {
            "id": "tgw-095b3b0b54EXAMPLE",
            "type": "transitGateway",
            "ownerAccount": "123456789012",
            "region": "us-east-1"
       },
        "associationId": " be85116d-46eb-4b43-a27a-da0c2ad648deEXAMPLE ",
        "allowedPrefixesToDirectConnectGateway": [
            {
                "cidr": "192.0.1.0/28"
            }
        ]
    }
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的关联和接触关联 Transit Gateway。

以下代码示例演示如何使用 delete-direct-connect-gateway。

AWS CLI

删除 Direct Connect 网关

以下示例删除 Direct Connect 网关 5f294f92-bafb-4011-916d-9b0bexample。

命令:

aws directconnect delete-direct-connect-gateway --direct-connect-gateway-id 5f294f92-bafb-4011-916d-9b0bexample

输出：

{
  "directConnectGateway": {
      "amazonSideAsn": 64512,
      "directConnectGatewayId": "5f294f92-bafb-4011-916d-9b0bexample",
      "ownerAccount": "123456789012",
      "directConnectGatewayName": "DxGateway1",
      "directConnectGatewayState": "deleting"
  }
}

以下代码示例演示如何使用 delete-interconnect。

AWS CLI

删除互连

以下 delete-interconnect 命令删除指定的互连。

aws directconnect delete-interconnect --interconnect-id dxcon-fgktov66

输出：

{
    "interconnectState": "deleted"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DeleteInterconnect。

以下代码示例演示如何使用 delete-lag。

AWS CLI

删除 LAG

以下示例删除指定 LAG。

命令:

aws directconnect delete-lag --lag-id dxlag-ffrhowd9

输出：

{
  "awsDevice": "EqDC2-4h6ce2r1bes6",
  "numberOfConnections": 0,
  "lagState": "deleted",
  "ownerAccount": "123456789012",
  "lagName": "TestLAG",
  "connections": [],
  "lagId": "dxlag-ffrhowd9",
  "minimumLinks": 0,
  "connectionsBandwidth": "1Gbps",
  "region": "us-east-1",
  "location": "EqDC2"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DeleteLag。

以下代码示例演示如何使用 delete-virtual-interface。

AWS CLI

删除虚拟接口

以下 delete-virtual-interface 命令删除指定的虚拟接口：

aws directconnect delete-virtual-interface --virtual-interface-id dxvif-ffhhk74f

输出：

{
    "virtualInterfaceState": "deleting"
}

以下代码示例演示如何使用 describe-connection-loa。

AWS CLI

描述使用 Linux 或 Mac OS X 连接的 LOA-CFA

以下示例描述用于连接 dxcon-fh6ayh1d 的 LOA-CFA。LOA-CFA 的内容经过 base64 编码。此命令使用 --output 和 --query 参数来控制输出并提取 loaContent 结构的内容。命令的最后一部分使用 base64 实用工具解码内容并将输出发送到 PDF 文件。

aws directconnect describe-connection-loa --connection-id dxcon-fh6ayh1d --output text --query loa.loaContent|base64 --decode > myLoaCfa.pdf

描述使用 Windows 连接的 LOA-CFA

前面的示例需要使用 base64 实用程序解码输出。在 Windows 电脑上，您可以改用 certutil。在以下示例中，第一个命令描述了用于连接 dxcon-fh6ayh1d 的 LOA-CFA，并使用 --output 和 --query 参数控制输出，将 loaContent 结构的内容提取到名为 myLoaCfa.base64 的文件中。第二个命令使用 certutil 实用工具解码文件并将输出发送到 PDF 文件。

aws directconnect describe-connection-loa --connection-id dxcon-fh6ayh1d --output text --query loa.loaContent > myLoaCfa.base64

certutil -decode myLoaCfa.base64 myLoaCfa.pdf

有关控制 AWS CLI 输出的更多信息，请参阅《AWS Command Line Interface 用户指南》中的从 AWS Command Line Interface 控制命令输出。

以下代码示例演示如何使用 describe-connections-on-interconnect。

AWS CLI

列出互连上的连接

以下 describe-connections-on-interconnect 命令列出给定互连中已预置的连接：

aws directconnect describe-connections-on-interconnect --interconnect-id dxcon-fgktov66

输出：

{
    "connections": [
        {
            "partnerName": "TIVIT",
            "vlan": 101,
            "ownerAccount": "123456789012",
            "connectionId": "dxcon-ffzc51m1",
            "connectionState": "ordering",
            "bandwidth": "500Mbps",
            "location": "TIVIT",
            "connectionName": "mydcinterconnect",
            "region": "sa-east-1"
        }
    ]
}

以下代码示例演示如何使用 describe-connections。

AWS CLI

列出当前区域的所有连接

以下 describe-connections 命令列出当前区域中的所有连接：

aws directconnect describe-connections

输出：

{
  "connections": [
      {
          "awsDevice": "EqDC2-123h49s71dabc",
          "ownerAccount": "123456789012",
          "connectionId": "dxcon-fguhmqlc",
          "lagId": "dxlag-ffrz71kw",
          "connectionState": "down",
          "bandwidth": "1Gbps",
          "location": "EqDC2",
          "connectionName": "My_Connection",
          "loaIssueTime": 1491568964.0,
          "region": "us-east-1"
      }
  ]
}

以下代码示例演示如何使用 describe-direct-connect-gateway-association-proposals。

AWS CLI

描述您的 Direct Connect 网关关联提议

以下 describe-direct-connect-gateway-association-proposals 示例显示有关您 Direct Connect 网关关联提议的详细信息。

aws directconnect describe-direct-connect-gateway-association-proposals

输出：

{
    "directConnectGatewayAssociationProposals": [
        {
            "proposalId": "c2ede9b4-bbc6-4d33-923c-bc4feEXAMPLE",
            "directConnectGatewayId": "11460968-4ac1-4fd3-bdb2-00599EXAMPLE",
            "directConnectGatewayOwnerAccount": "111122223333",
            "proposalState": "requested",
            "associatedGateway": {
                "id": "tgw-02f776b1a7EXAMPLE",
                "type": "transitGateway",
                "ownerAccount": "111122223333",
                "region": "us-east-1"
            },
            "existingAllowedPrefixesToDirectConnectGateway": [
                {
                    "cidr": "192.168.2.0/30"
                },
                {
                    "cidr": "192.168.1.0/30"
                }
            ],
            "requestedAllowedPrefixesToDirectConnectGateway": [
                {
                    "cidr": "192.168.1.0/30"
                }
            ]
        },
        {
            "proposalId": "cb7f41cb-8128-43a5-93b1-dcaedEXAMPLE",
            "directConnectGatewayId": "11560968-4ac1-4fd3-bcb2-00599EXAMPLE",
            "directConnectGatewayOwnerAccount": "111122223333",
            "proposalState": "accepted",
            "associatedGateway": {
                "id": "tgw-045776b1a7EXAMPLE",
                "type": "transitGateway",
                "ownerAccount": "111122223333",
                "region": "us-east-1"
            },
            "existingAllowedPrefixesToDirectConnectGateway": [
                {
                    "cidr": "192.168.4.0/30"
                },
                {
                    "cidr": "192.168.5.0/30"
                }
            ],
            "requestedAllowedPrefixesToDirectConnectGateway": [
                {
                    "cidr": "192.168.5.0/30"
                }
            ]
        }
    ]
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的关联和接触关联 Transit Gateway。

以下代码示例演示如何使用 describe-direct-connect-gateway-associations。

AWS CLI

描述 Direct Connect 网关关联

以下示例描述 Direct Connect 网关 5f294f92-bafb-4011-916d-9b0bexample 的所有关联。

命令:

aws directconnect describe-direct-connect-gateway-associations --direct-connect-gateway-id 5f294f92-bafb-4011-916d-9b0bexample

输出：

{
  "nextToken": "eyJ2IjoxLCJzIjoxLCJpIjoiOU83OTFodzdycnZCbkN4MExHeHVwQT09IiwiYyI6InIxTEN0UEVHV0I1UFlkaWFnNlUxanJkRWF6eW1iOElHM0FRVW1MdHRJK0dxcnN1RWtvcFBKWFE2ZjRNRGdGTkhCa0tDZmVINEtZOEYwZ0dEYWZpbmU0ZnZMYVhKRjdXRVdENmdQZ1Y4d2w0PSJ9",
  "directConnectGatewayAssociations": [
      {
          "associationState": "associating",
          "virtualGatewayOwnerAccount": "123456789012",
          "directConnectGatewayId": "5f294f92-bafb-4011-916d-9b0bexample",
          "virtualGatewayId": "vgw-6efe725e",
          "virtualGatewayRegion": "us-east-2"
      },
      {
          "associationState": "disassociating",
          "virtualGatewayOwnerAccount": "123456789012",
          "directConnectGatewayId": "5f294f92-bafb-4011-916d-9b0bexample",
          "virtualGatewayId": "vgw-ebaa27db",
          "virtualGatewayRegion": "us-east-2"
      }
  ]
}

以下代码示例演示如何使用 describe-direct-connect-gateway-attachments。

AWS CLI

描述 Direct Connect 网关附件

以下示例描述附加到 Direct Connect 网关 5f294f92-bafb-4011-916d-9b0bexample 的虚拟接口。

命令:

aws directconnect describe-direct-connect-gateway-attachments --direct-connect-gateway-id 5f294f92-bafb-4011-916d-9b0bexample

输出：

{
  "directConnectGatewayAttachments": [
      {
          "virtualInterfaceOwnerAccount": "123456789012",
          "directConnectGatewayId": "5f294f92-bafb-4011-916d-9b0bexample",
          "virtualInterfaceRegion": "us-east-2",
          "attachmentState": "attaching",
          "virtualInterfaceId": "dxvif-fg9zyabc"
      }
  ],
  "nextToken": "eyJ2IjoxLCJzIjoxLCJpIjoibEhXdlNpUXF5RzhoL1JyUW52SlV2QT09IiwiYyI6Im5wQjFHQ0RyQUdRS3puNnNXcUlINCtkTTA4dTk3KzBiU0xtb05JQmlaczZ6NXRIYmk3c3VESUxFTTd6a2FzVHM0VTFwaGJkZGNxTytqWmQ3QzMzOGRQaTVrTThrOG1zelRsV3gyMWV3VTNFPSJ9"
}

以下代码示例演示如何使用 describe-direct-connect-gateways。

AWS CLI

描述您的 Direct Connect 网关

以下示例描述您的所有 Direct Connect 网关。

命令:

aws directconnect describe-direct-connect-gateways

输出：

{
  "directConnectGateways": [
      {
          "amazonSideAsn": 64512,
          "directConnectGatewayId": "cf68415c-f4ae-48f2-87a7-3b52cexample",
          "ownerAccount": "123456789012",
          "directConnectGatewayName": "DxGateway2",
          "directConnectGatewayState": "available"
      },
      {
          "amazonSideAsn": 64512,
          "directConnectGatewayId": "5f294f92-bafb-4011-916d-9b0bdexample",
          "ownerAccount": "123456789012",
          "directConnectGatewayName": "DxGateway1",
          "directConnectGatewayState": "available"
      }
  ]
}

以下代码示例演示如何使用 describe-hosted-connections。

AWS CLI

列出互连上的连接

以下示例列出已在给定互连上预置的连接列表。

命令:

aws directconnect describe-hosted-connections --connection-id dxcon-fgktov66

输出：

{
    "connections": [
        {
            "partnerName": "TIVIT",
            "vlan": 101,
            "ownerAccount": "123456789012",
            "connectionId": "dxcon-ffzc51m1",
            "connectionState": "ordering",
            "bandwidth": "500Mbps",
            "location": "TIVIT",
            "connectionName": "mydcinterconnect",
            "region": "sa-east-1"
        }
    ]
}

以下代码示例演示如何使用 describe-interconnect-loa。

AWS CLI

描述使用 Linux 或 Mac OS X 进行互连的 LOA-CFA

以下示例描述用于互连 dxcon-fh6ayh1d 的 LOA-CFA。LOA-CFA 的内容经过 base64 编码。此命令使用 --output 和 --query 参数来控制输出并提取 loaContent 结构的内容。命令的最后一部分使用 base64 实用工具解码内容并将输出发送到 PDF 文件。

aws directconnect describe-interconnect-loa --interconnect-id dxcon-fh6ayh1d --output text --query loa.loaContent|base64 --decode > myLoaCfa.pdf

描述使用 Windows 进行互连的 LOA-CFA

前面的示例需要使用 base64 实用程序解码输出。在 Windows 电脑上，您可以改用 certutil。在以下示例中，第一个命令描述了用于互连 dxcon-fh6ayh1d 的 LOA-CFA，并使用 --output 和 --query 参数控制输出，将 loaContent 结构的内容提取到名为 myLoaCfa.base64 的文件中。第二个命令使用 certutil 实用工具解码文件并将输出发送到 PDF 文件。

aws directconnect describe-interconnect-loa --interconnect-id dxcon-fh6ayh1d --output text --query loa.loaContent > myLoaCfa.base64

certutil -decode myLoaCfa.base64 myLoaCfa.pdf

有关控制 AWS CLI 输出的更多信息，请参阅《AWS Command Line Interface 用户指南》中的从 AWS Command Line Interface 控制命令输出。

以下代码示例演示如何使用 describe-interconnects。

AWS CLI

列出互连

以下 describe-interconnects 命令列出您 AWS 账户拥有的互连：

aws directconnect describe-interconnects

输出：

{
    "interconnects": [
        {
            "region": "sa-east-1",
            "bandwidth": "1Gbps",
            "location": "TIVIT",
            "interconnectName": "1G Interconnect to AWS",
            "interconnectId": "dxcon-fgktov66",
            "interconnectState": "down"
        }
    ]
}

以下代码示例演示如何使用 describe-lags。

AWS CLI

描述您的 LAG

以下命令描述当前区域的所有 LAG。

命令:

aws directconnect describe-lags

输出：

{
  "lags": [
      {
          "awsDevice": "EqDC2-19y7z3m17xpuz",
          "numberOfConnections": 2,
          "lagState": "down",
          "ownerAccount": "123456789012",
          "lagName": "DA-LAG",
          "connections": [
              {
                  "ownerAccount": "123456789012",
                  "connectionId": "dxcon-ffnikghc",
                  "lagId": "dxlag-fgsu9erb",
                  "connectionState": "requested",
                  "bandwidth": "10Gbps",
                  "location": "EqDC2",
                  "connectionName": "Requested Connection 1 for Lag dxlag-fgsu9erb",
                  "region": "us-east-1"
              },
              {
                  "ownerAccount": "123456789012",
                  "connectionId": "dxcon-fglgbdea",
                  "lagId": "dxlag-fgsu9erb",
                  "connectionState": "requested",
                  "bandwidth": "10Gbps",
                  "location": "EqDC2",
                  "connectionName": "Requested Connection 2 for Lag dxlag-fgsu9erb",
                  "region": "us-east-1"
              }
          ],
          "lagId": "dxlag-fgsu9erb",
          "minimumLinks": 0,
          "connectionsBandwidth": "10Gbps",
          "region": "us-east-1",
          "location": "EqDC2"
      }
  ]
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DescribeLags。

以下代码示例演示如何使用 describe-loa。

AWS CLI

描述使用 Linux 或 Mac OS X 连接的 LOA-CFA

以下示例描述用于连接 dxcon-fh6ayh1d 的 LOA-CFA。LOA-CFA 的内容经过 base64 编码。此命令使用 --output 和 --query 参数来控制输出并提取 loaContent 结构的内容。命令的最后一部分使用 base64 实用工具解码内容并将输出发送到 PDF 文件。

aws directconnect describe-loa --connection-id dxcon-fh6ayh1d --output text --query loa.loaContent|base64 --decode > myLoaCfa.pdf

描述使用 Windows 连接的 LOA-CFA

前面的示例需要使用 base64 实用程序解码输出。在 Windows 电脑上，您可以改用 certutil。在以下示例中，第一个命令描述了用于连接 dxcon-fh6ayh1d 的 LOA-CFA，并使用 --output 和 --query 参数控制输出，将 loaContent 结构的内容提取到名为 myLoaCfa.base64 的文件中。第二个命令使用 certutil 实用工具解码文件并将输出发送到 PDF 文件。

aws directconnect describe-loa --connection-id dxcon-fh6ayh1d --output text --query loa.loaContent > myLoaCfa.base64

certutil -decode myLoaCfa.base64 myLoaCfa.pdf

有关控制 AWS CLI 输出的更多信息，请参阅《AWS Command Line Interface 用户指南》中的从 AWS Command Line Interface 控制命令输出。

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DescribeLoa。

以下代码示例演示如何使用 describe-locations。

AWS CLI

列出 AWS Direct Connect 合作伙伴和位置

以下 describe-locations 命令列出当前区域的 AWS Direct Connect 合作伙伴和位置：

aws directconnect describe-locations

输出：

{
    "locations": [
        {
            "locationName": "NAP do Brasil, Barueri, Sao Paulo",
            "locationCode": "TNDB"
        },
        {
            "locationName": "Tivit - Site Transamerica (Sao Paulo)",
            "locationCode": "TIVIT"
        }
    ]
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DescribeLocations。

以下代码示例演示如何使用 describe-tags。

AWS CLI

描述您 AWS Direct Connect 资源的标签

以下命令描述连接 dxcon-abcabc12 的标签。

命令:

aws directconnect describe-tags --resource-arns arn:aws:directconnect:us-east-1:123456789012:dxcon/dxcon-abcabc12

输出：

{
  "resourceTags": [
      {
          "resourceArn": "arn:aws:directconnect:us-east-1:123456789012:dxcon/dxcon-abcabc12",
          "tags": [
              {
                  "value": "VAConnection",
                  "key": "Name"
              }
          ]
      }
  ]
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 DescribeTags。

以下代码示例演示如何使用 describe-virtual-gateways。

AWS CLI

列出虚拟专用网关

以下 describe-virtual-gateways 命令列出您 AWS 账户拥有的虚拟专用网关：

aws directconnect describe-virtual-gateways

输出：

{
    "virtualGateways": [
        {
            "virtualGatewayId": "vgw-aba37db6",
            "virtualGatewayState": "available"
        }
    ]
}

以下代码示例演示如何使用 describe-virtual-interfaces。

AWS CLI

列出所有虚拟接口

以下 describe-virtual-interfaces 命令列出与您 AWS 账户关联的所有虚拟接口的相关信息：

aws directconnect describe-virtual-interfaces --connection-id dxcon-ffjrkx17

输出：

{
    "virtualInterfaces": [
        {
            "virtualInterfaceState": "down",
            "asn": 65000,
            "vlan": 101,
            "customerAddress": "192.168.1.2/30",
            "ownerAccount": "123456789012",
            "connectionId": "dxcon-ffjrkx17",
            "virtualGatewayId": "vgw-aba37db6",
            "virtualInterfaceId": "dxvif-ffhhk74f",
            "authKey": "asdf34example",
            "routeFilterPrefixes": [],
            "location": "TIVIT",
            "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-ffhhk74f\">\n  <vlan>101</vlan>\n  <customer_address>192.168.1.2/30</customer_address>\n  <amazon_address>192.168.1.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>asdf34example</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>private</connection_type>\n</logical_connection>\n",
            "amazonAddress": "192.168.1.1/30",
            "virtualInterfaceType": "private",
            "virtualInterfaceName": "PrivateVirtualInterface"
        },
        {
            "virtualInterfaceState": "verifying",
            "asn": 65000,
            "vlan": 2000,
            "customerAddress": "203.0.113.2/30",
            "ownerAccount": "123456789012",
            "connectionId": "dxcon-ffjrkx17",
            "virtualGatewayId": "",
            "virtualInterfaceId": "dxvif-fgh0hcrk",
            "authKey": "asdf34example",
            "routeFilterPrefixes": [
                {
                    "cidr": "203.0.113.4/30"
                },
                {
                    "cidr": "203.0.113.0/30"
                }
            ],
            "location": "TIVIT",
            "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fgh0hcrk\">\n  <vlan>2000</vlan>\n  <customer_address>203.0.113.2/30</customer_address>\n  <amazon_address>203.0.113.1/30</amazon_address>\n  <bgp_asn>65000</bgp_asn>\n  <bgp_auth_key>asdf34example</bgp_auth_key>\n  <amazon_bgp_asn>7224</amazon_bgp_asn>\n  <connection_type>public</connection_type>\n</logical_connection>\n",
            "amazonAddress": "203.0.113.1/30",
            "virtualInterfaceType": "public",
            "virtualInterfaceName": "PublicVirtualInterface"
        }
    ]
}

以下代码示例演示如何使用 disassociate-connection-from-lag。

AWS CLI

解除连接与 LAG 的关联

以下示例解除指定连接与指定 LAG 的关联。

命令:

aws directconnect disassociate-connection-from-lag --lag-id dxlag-fhccu14t --connection-id  dxcon-fg9607vm

输出：

{
  "ownerAccount": "123456789012",
  "connectionId": "dxcon-fg9607vm",
  "connectionState": "requested",
  "bandwidth": "1Gbps",
  "location": "EqDC2",
  "connectionName": "Con2ForLag",
  "region": "us-east-1"
}

以下代码示例演示如何使用 tag-resource。

AWS CLI

向 AWS Direct Connect 资源添加标签

以下命令向连接 dxcon-abcabc12 中添加一个键为 Name、值为 VAConnection 的标签。如果命令成功，则不返回任何输出。

命令:

aws directconnect tag-resource --resource-arn arn:aws:directconnect:us-east-1:123456789012:dxcon/dxcon-abcabc12 --tags "key=Name,value=VAConnection"

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 TagResource。

以下代码示例演示如何使用 untag-resource。

AWS CLI

从 AWS Direct Connect 资源中移除标签

以下命令从连接 dxcon-abcabc12 中移除具有键 Name 的标签。如果命令成功，则不返回任何输出。

命令:

aws directconnect untag-resource --resource-arn arn:aws:directconnect:us-east-1:123456789012:dxcon/dxcon-abcabc12 --tag-keys Name

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 UntagResource。

以下代码示例演示如何使用 update-direct-connect-gateway-association。

AWS CLI

更新 Direct Connect 网关关联的指定属性

以下 update-direct-connect-gateway-association 示例将指定的 CIDR 块添加到 Direct Connect 网关关联。

aws directconnect update-direct-connect-gateway-association \
    --association-id 820a6e4f-5374-4004-8317-3f64bEXAMPLE \
    --add-allowed-prefixes-to-direct-connect-gateway cidr=192.168.2.0/30

输出：

{
    "directConnectGatewayAssociation": {
        "directConnectGatewayId": "11460968-4ac1-4fd3-bdb2-00599EXAMPLE",
        "directConnectGatewayOwnerAccount": "111122223333",
        "associationState": "updating",
        "associatedGateway": {
            "id": "tgw-02f776b1a7EXAMPLE",
            "type": "transitGateway",
            "ownerAccount": "111122223333",
            "region": "us-east-1"
        },
        "associationId": "820a6e4f-5374-4004-8317-3f64bEXAMPLE",
        "allowedPrefixesToDirectConnectGateway": [
            {
                "cidr": "192.168.2.0/30"
            },
            {
                "cidr": "192.168.1.0/30"
            }
        ]
    }
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的使用 Direct Connect 网关。

以下代码示例演示如何使用 update-lag。

AWS CLI

更新 LAG

以下示例更改指定 LAG 的名称。

命令:

aws directconnect update-lag --lag-id dxlag-ffjhj9lx --lag-name 2ConnLag

输出：

{
  "awsDevice": "CSVA1-23u8tlpaz8iks",
  "numberOfConnections": 2,
  "lagState": "down",
  "ownerAccount": "123456789012",
  "lagName": "2ConnLag",
  "connections": [
      {
          "ownerAccount": "123456789012",
          "connectionId": "dxcon-fflqyj95",
          "lagId": "dxlag-ffjhj9lx",
          "connectionState": "requested",
          "bandwidth": "1Gbps",
          "location": "CSVA1",
          "connectionName": "Requested Connection 2 for Lag dxlag-ffjhj9lx",
          "region": "us-east-1"
      },
      {
          "ownerAccount": "123456789012",
          "connectionId": "dxcon-ffqr6x5q",
          "lagId": "dxlag-ffjhj9lx",
          "connectionState": "requested",
          "bandwidth": "1Gbps",
          "location": "CSVA1",
          "connectionName": "Requested Connection 1 for Lag dxlag-ffjhj9lx",
          "region": "us-east-1"
      }
  ],
  "lagId": "dxlag-ffjhj9lx",
  "minimumLinks": 0,
  "connectionsBandwidth": "1Gbps",
  "region": "us-east-1",
  "location": "CSVA1"
}

  • 有关 API 详细信息，请参阅《AWS CLI 命令参考》中的 UpdateLag。

以下代码示例演示如何使用 update-virtual-interface-attributes。

AWS CLI

更新虚拟接口的 MTU

以下 update-virtual-interface-attributes 示例更新指定虚拟接口的 MTU。

aws directconnect update-virtual-interface-attributes \
    --virtual-interface-id dxvif-fEXAMPLE \
    --mtu 1500

输出：

{
    "ownerAccount": "1111222233333",
    "virtualInterfaceId": "dxvif-fEXAMPLE",
    "location": "loc1",
    "connectionId": "dxlag-fEXAMPLE",
    "virtualInterfaceType": "transit",
    "virtualInterfaceName": "example transit virtual interface",
    "vlan": 125,
    "asn": 650001,
    "amazonSideAsn": 64512,
    "authKey": "0xzxgA9YoW9h58u8SEXAMPLE",
    "amazonAddress": "169.254.248.1/30",
    "customerAddress": "169.254.248.2/30",
    "addressFamily": "ipv4",
    "virtualInterfaceState": "down",
    "customerRouterConfig": "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<logical_connection id=\"dxvif-fEXAMPLE\">\n  <vlan>125</vlan>\n  <customer_address>169.254.248.2/30</customer_address>\n  <amazon_address>169.254.248.1/30</amazon_address>\n  <bgp_asn>650001</bgp_asn>\n  <bgp_auth_key>0xzxgA9YoW9h58u8SEXAMPLE</bgp_auth_key>\n  <amazon_bgp_asn>64512</amazon_bgp_asn>\n  <connection_type>transit</connection_type>\n</logical_connection>\n",
    "mtu": 1500,
    "jumboFrameCapable": true,
    "virtualGatewayId": "",
    "directConnectGatewayId": "879b76a1-403d-4700-8b53-4a56ed85436e",
    "routeFilterPrefixes": [],
    "bgpPeers": [
        {
            "bgpPeerId": "dxpeer-fEXAMPLE",
            "asn": 650001,
            "authKey": "0xzxgA9YoW9h58u8SEXAMPLE",
            "addressFamily": "ipv4",
            "amazonAddress": "169.254.248.1/30",
            "customerAddress": "169.254.248.2/30",
            "bgpPeerState": "available",
            "bgpStatus": "down",
            "awsDeviceV2": "loc1-26wz6vEXAMPLE"
        }
    ],
    "region": "sa-east-1",
    "awsDeviceV2": "loc1-26wz6vEXAMPLE",
    "tags": []
}

有关更多信息，请参阅《AWS Direct Connect 用户指南》中的为私有虚拟接口或中转虚拟接口设置网络 MTU。