RadiusSettings
Contains information about a Remote Authentication Dial In User Service (RADIUS) server.
Contents
- AuthenticationProtocol
-
The protocol specified for your RADIUS endpoints.
Type: String
Valid Values:
PAP | CHAP | MS-CHAPv1 | MS-CHAPv2Required: No
- DisplayLabel
-
Not currently used.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 64.
Required: No
- RadiusPort
-
The port that your RADIUS server is using for communications. Your self-managed network must allow inbound traffic over this port from the AWS Directory Service servers.
Type: Integer
Valid Range: Minimum value of 1025. Maximum value of 65535.
Required: No
- RadiusRetries
-
The maximum number of times that communication with the RADIUS server is retried after the initial attempt.
Type: Integer
Valid Range: Minimum value of 0. Maximum value of 10.
Required: No
- RadiusServers
-
An array of strings that contains the fully qualified domain name (FQDN) or IP addresses of the RADIUS server endpoints, or the FQDN or IP addresses of your RADIUS server load balancer.
Type: Array of strings
Length Constraints: Minimum length of 1. Maximum length of 256.
Required: No
- RadiusTimeout
-
The amount of time, in seconds, to wait for the RADIUS server to respond.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 50.
Required: No
-
Required for enabling RADIUS on the directory.
Type: String
Length Constraints: Minimum length of 8. Maximum length of 512.
Pattern:
^(\p{LD}|\p{Punct}| )+$Required: No
- UseSameUsername
-
Not currently used.
Type: Boolean
Required: No
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
