Creating a new VPC - Amazon WorkSpaces Secure Browser

Creating a new VPC

Complete the following steps to create a new VPC with one public subnet and one private subnet.

To create a new VPC

  1. Open the Amazon VPC Console at https://console.aws.amazon.com/vpc/.

  2. In the navigation pane, choose VPC Dashboard.

  3. Choose Launch VPC Wizard.

  4. In Step 1: Select a VPC Configuration, choose VPC with Public and Private Subnets, and then choose Select.

  5. In Step 2: VPC with Public and Private Subnets, configure the VPC as follows:

    • For IPv4 CIDR block, specify an IPv4 CIDR block for the VPC.

    • For IPv6 CIDR block, keep the default value, No IPv6 CIDR Block.

    • For VPC name, enter a unique name for the VPC.

    • Configure the public subnet as follows:

      • For Public subnet's IPv4 CIDR, specify the CIDR block for the subnet.

      • For Availability Zone, keep the default value, No Preference.

      • For Public subnet name, enter a name for the subnet. For example, WorkSpaces Secure Browser Public Subnet.

    • Configure the first private subnet as follows:

      • For Private subnet's IPv4 CIDR, specify the CIDR block for the subnet. Make a note of the value that you specify.

      • For Availability Zone, select a specific zone and make a note of the zone that you select.

      • For Private subnet name, enter a name for the subnet. For example, WorkSpaces Secure Browser Private Subnet1.

    • For the remaining fields, keep the default values where applicable.

    • For Elastic IP Allocation ID, enter the value that corresponds to the Elastic IP address that you created. This address is then assigned to the NAT gateway. If you don't have an Elastic IP address, create one by using the Amazon VPC Console at https://console.aws.amazon.com/vpc/.

    • For Service endpoints, if an Amazon S3 endpoint is required for your environment, specify one.

      To specify an Amazon S3 endpoint, do the following:

      1. Choose Add Endpoint.

      2. For Service, select the com.amazonaws.Region.s3 entry, where Region is the AWS Region you're creating your VPC in.

      3. For Subnet, choose Private subnet.

      4. For Policy, keep the default value, Full Access.

    • For Enable DNS hostnames, keep the default value, Yes.

    • For Hardware tenancy, keep the default value, Default.

    • Choose Create VPC.

    • It takes several minutes to set up your VPC. After the VPC is created, choose OK.