Package software.amazon.awscdk.services.fms

Class CfnPolicy

java.lang.Object
software.amazon.jsii.JsiiObject
software.constructs.Construct
software.amazon.awscdk.core.Construct
software.amazon.awscdk.core.CfnElement
software.amazon.awscdk.core.CfnRefElement
software.amazon.awscdk.core.CfnResource
software.amazon.awscdk.services.fms.CfnPolicy
All Implemented Interfaces:
IConstruct, IDependable, IInspectable, software.amazon.jsii.JsiiSerializable, software.constructs.IConstruct
@Generated(value="jsii-pacmak/1.84.0 (build 5404dcf)", date="2023-06-19T16:29:56.757Z") @Stability(Stable) public class CfnPolicy extends CfnResource implements IInspectable
A CloudFormation AWS::FMS::Policy.

An AWS Firewall Manager policy.

Firewall Manager provides the following types of policies:

  • An AWS Shield Advanced policy, which applies Shield Advanced protection to specified accounts and resources.
  • An AWS WAF policy (type WAFV2), which defines rule groups to run first in the corresponding AWS WAF web ACL and rule groups to run last in the web ACL.
  • An AWS WAF Classic policy, which defines a rule group. AWS WAF Classic doesn't support rule groups in Amazon CloudFront , so, to create AWS WAF Classic policies through CloudFront , you first need to create your rule groups outside of CloudFront .
  • A security group policy, which manages VPC security groups across your AWS organization.
  • An AWS Network Firewall policy, which provides firewall rules to filter network traffic in specified Amazon VPCs.
  • A DNS Firewall policy, which provides Amazon Route 53 Resolver DNS Firewall rules to filter DNS queries for specified Amazon VPCs.
  • A third-party firewall policy, which manages a third-party firewall service such as the Palo Alto Networks Cloud Next-Generation Firewall.

Each policy is specific to one of the types. If you want to enforce more than one policy type across accounts, create multiple policies. You can create multiple policies for each type.

These policies require some setup to use. For more information, see the sections on prerequisites and getting started under AWS Firewall Manager .

Example: 

 // The code below shows an example of how to instantiate this type.
 // The values are placeholders you should change.
 import software.amazon.awscdk.services.fms.*;
 CfnPolicy cfnPolicy = CfnPolicy.Builder.create(this, "MyCfnPolicy")
         .excludeResourceTags(false)
         .policyName("policyName")
         .remediationEnabled(false)
         .securityServicePolicyData(SecurityServicePolicyDataProperty.builder()
                 .type("type")
                 // the properties below are optional
                 .managedServiceData("managedServiceData")
                 .policyOption(PolicyOptionProperty.builder()
                         .networkFirewallPolicy(NetworkFirewallPolicyProperty.builder()
                                 .firewallDeploymentModel("firewallDeploymentModel")
                                 .build())
                         .thirdPartyFirewallPolicy(ThirdPartyFirewallPolicyProperty.builder()
                                 .firewallDeploymentModel("firewallDeploymentModel")
                                 .build())
                         .build())
                 .build())
         // the properties below are optional
         .deleteAllPolicyResources(false)
         .excludeMap(Map.of(
                 "account", List.of("account"),
                 "orgunit", List.of("orgunit")))
         .includeMap(Map.of(
                 "account", List.of("account"),
                 "orgunit", List.of("orgunit")))
         .policyDescription("policyDescription")
         .resourcesCleanUp(false)
         .resourceSetIds(List.of("resourceSetIds"))
         .resourceTags(List.of(ResourceTagProperty.builder()
                 .key("key")
                 // the properties below are optional
                 .value("value")
                 .build()))
         .resourceType("resourceType")
         .resourceTypeList(List.of("resourceTypeList"))
         .tags(List.of(PolicyTagProperty.builder()
                 .key("key")
                 .value("value")
                 .build()))
         .build();

  • Field Details

    • CFN_RESOURCE_TYPE_NAME

      @Stability(Stable) public static final String CFN_RESOURCE_TYPE_NAME
      The CloudFormation resource type name for this resource class.

  • Constructor Details

    • CfnPolicy

      protected CfnPolicy(software.amazon.jsii.JsiiObjectRef objRef)

    • CfnPolicy

      protected CfnPolicy(software.amazon.jsii.JsiiObject.InitializationMode initializationMode)

    • CfnPolicy

      @Stability(Stable) public CfnPolicy(@NotNull Construct scope, @NotNull String id, @NotNull CfnPolicyProps props)
      Create a new AWS::FMS::Policy.

      Parameters:
      scope -
      • scope in which this resource is defined.
      This parameter is required.
      id -
      • scoped id of the resource.
      This parameter is required.
      props -
      • resource properties.
      This parameter is required.

  • Method Details

    • inspect

      @Stability(Stable) public void inspect(@NotNull TreeInspector inspector)
      Examines the CloudFormation resource and discloses attributes.

      Specified by:
      inspect in interface IInspectable
      Parameters:
      inspector -
      • tree inspector to collect and process attributes.
      This parameter is required.

    • renderProperties

      @Stability(Stable) @NotNull protected Map<String,Object> renderProperties(@NotNull Map<String,Object> props)
      Overrides:
      renderProperties in class CfnResource
      Parameters:
      props - This parameter is required.

    • getAttrArn

      @Stability(Stable) @NotNull public String getAttrArn()
      The Amazon Resource Name (ARN) of the policy.

    • getAttrId

      @Stability(Stable) @NotNull public String getAttrId()
      The ID of the policy.

    • getCfnProperties

      @Stability(Stable) @NotNull protected Map<String,Object> getCfnProperties()
      Overrides:
      getCfnProperties in class CfnResource

    • getExcludeResourceTags

      @Stability(Stable) @NotNull public Object getExcludeResourceTags()
      Used only when tags are specified in the ResourceTags property.

      If this property is True , resources with the specified tags are not in scope of the policy. If it's False , only resources with the specified tags are in scope of the policy.

    • setExcludeResourceTags

      @Stability(Stable) public void setExcludeResourceTags(@NotNull Boolean value)
      Used only when tags are specified in the ResourceTags property.

      If this property is True , resources with the specified tags are not in scope of the policy. If it's False , only resources with the specified tags are in scope of the policy.

    • setExcludeResourceTags

      @Stability(Stable) public void setExcludeResourceTags(@NotNull IResolvable value)
      Used only when tags are specified in the ResourceTags property.

      If this property is True , resources with the specified tags are not in scope of the policy. If it's False , only resources with the specified tags are in scope of the policy.

    • getPolicyName

      @Stability(Stable) @NotNull public String getPolicyName()
      The name of the AWS Firewall Manager policy.

    • setPolicyName

      @Stability(Stable) public void setPolicyName(@NotNull String value)
      The name of the AWS Firewall Manager policy.

    • getRemediationEnabled

      @Stability(Stable) @NotNull public Object getRemediationEnabled()
      Indicates if the policy should be automatically applied to new resources.

    • setRemediationEnabled

      @Stability(Stable) public void setRemediationEnabled(@NotNull Boolean value)
      Indicates if the policy should be automatically applied to new resources.

    • setRemediationEnabled

      @Stability(Stable) public void setRemediationEnabled(@NotNull IResolvable value)
      Indicates if the policy should be automatically applied to new resources.

    • getSecurityServicePolicyData

      @Stability(Stable) @NotNull public Object getSecurityServicePolicyData()
      Details about the security service that is being used to protect the resources.

      This contains the following settings:

      • Type - Indicates the service type that the policy uses to protect the resource. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting AWS Support .

      Valid values: DNS_FIREWALL | NETWORK_FIREWALL | SECURITY_GROUPS_COMMON | SECURITY_GROUPS_CONTENT_AUDIT | SECURITY_GROUPS_USAGE_AUDIT | SHIELD_ADVANCED | THIRD_PARTY_FIREWALL | WAFV2 | WAF

      • ManagedServiceData - Details about the service that are specific to the service type, in JSON format.
      • Example: DNS_FIREWALL

      "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"

      Valid values for preProcessRuleGroups are between 1 and 99. Valid values for postProcessRuleGroups are between 9901 and 10000.

      • Example: NETWORK_FIREWALL - Centralized deployment model

      "{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

      With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

      With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig . To configure the Availability Zones in firewallCreationConfig , specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters.

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall centralized deployment model

      "{ \"type\":\"THIRD_PARTY_FIREWALL\", \"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\", \"thirdPartyFirewallConfig\":{ \"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to CENTRALIZED .

      • Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall distributed deployment model

      "{\"type\":\"THIRD_PARTY_FIREWALL\",\"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\",\"thirdPartyFirewallConfig\":{\"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{ \"distributedFirewallDeploymentModel\":{ \"distributedFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{ \"availabilityZoneConfigList\":[ {\"availabilityZoneName\":\"${AvailabilityZone}\" } ] } }, \"allowedIPV4CidrList\":[ ] } } } }"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Specification for SHIELD_ADVANCED for Amazon CloudFront distributions

      "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false}"

      For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}"

      The default value for automaticResponseStatus is IGNORED . The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED . The default value for overrideCustomerWebaclClassic is false .

      For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.

      • Example: WAFV2

      "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAmazonIpReputationList\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

      In the loggingConfiguration , you can specify one logDestinationConfigs , you can optionally provide up to 20 redactedFields , and the RedactedFieldType must be one of URI , QUERY_STRING , HEADER , or METHOD .

      • Example: AWS WAF Classic

      "{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"

      • Example: WAFV2 - AWS Firewall Manager support for AWS WAF managed rule group versioning

      "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

      To use a specific version of a AWS WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true , and set version to the version you'd like to use. If you don't set versionEnabled to true , or if you omit versionEnabled , then Firewall Manager uses the default version of the AWS WAF managed rule group.

      • Example: SECURITY_GROUPS_COMMON

      "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

      • Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns

      "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

      • Example: SECURITY_GROUPS_CONTENT_AUDIT

      "{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}"

      The security group action for content audit can be ALLOW or DENY . For ALLOW , all in-scope security group rules must be within the allowed range of the policy's security group rules. For DENY , all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.

      • Example: SECURITY_GROUPS_USAGE_AUDIT

      "{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"

    • setSecurityServicePolicyData

      @Stability(Stable) public void setSecurityServicePolicyData(@NotNull IResolvable value)
      Details about the security service that is being used to protect the resources.

      This contains the following settings:

      • Type - Indicates the service type that the policy uses to protect the resource. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting AWS Support .

      Valid values: DNS_FIREWALL | NETWORK_FIREWALL | SECURITY_GROUPS_COMMON | SECURITY_GROUPS_CONTENT_AUDIT | SECURITY_GROUPS_USAGE_AUDIT | SHIELD_ADVANCED | THIRD_PARTY_FIREWALL | WAFV2 | WAF

      • ManagedServiceData - Details about the service that are specific to the service type, in JSON format.
      • Example: DNS_FIREWALL

      "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"

      Valid values for preProcessRuleGroups are between 1 and 99. Valid values for postProcessRuleGroups are between 9901 and 10000.

      • Example: NETWORK_FIREWALL - Centralized deployment model

      "{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

      With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

      With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig . To configure the Availability Zones in firewallCreationConfig , specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters.

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall centralized deployment model

      "{ \"type\":\"THIRD_PARTY_FIREWALL\", \"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\", \"thirdPartyFirewallConfig\":{ \"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to CENTRALIZED .

      • Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall distributed deployment model

      "{\"type\":\"THIRD_PARTY_FIREWALL\",\"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\",\"thirdPartyFirewallConfig\":{\"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{ \"distributedFirewallDeploymentModel\":{ \"distributedFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{ \"availabilityZoneConfigList\":[ {\"availabilityZoneName\":\"${AvailabilityZone}\" } ] } }, \"allowedIPV4CidrList\":[ ] } } } }"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Specification for SHIELD_ADVANCED for Amazon CloudFront distributions

      "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false}"

      For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}"

      The default value for automaticResponseStatus is IGNORED . The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED . The default value for overrideCustomerWebaclClassic is false .

      For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.

      • Example: WAFV2

      "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAmazonIpReputationList\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

      In the loggingConfiguration , you can specify one logDestinationConfigs , you can optionally provide up to 20 redactedFields , and the RedactedFieldType must be one of URI , QUERY_STRING , HEADER , or METHOD .

      • Example: AWS WAF Classic

      "{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"

      • Example: WAFV2 - AWS Firewall Manager support for AWS WAF managed rule group versioning

      "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

      To use a specific version of a AWS WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true , and set version to the version you'd like to use. If you don't set versionEnabled to true , or if you omit versionEnabled , then Firewall Manager uses the default version of the AWS WAF managed rule group.

      • Example: SECURITY_GROUPS_COMMON

      "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

      • Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns

      "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

      • Example: SECURITY_GROUPS_CONTENT_AUDIT

      "{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}"

      The security group action for content audit can be ALLOW or DENY . For ALLOW , all in-scope security group rules must be within the allowed range of the policy's security group rules. For DENY , all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.

      • Example: SECURITY_GROUPS_USAGE_AUDIT

      "{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"

    • setSecurityServicePolicyData

      @Stability(Stable) public void setSecurityServicePolicyData(@NotNull CfnPolicy.SecurityServicePolicyDataProperty value)
      Details about the security service that is being used to protect the resources.

      This contains the following settings:

      • Type - Indicates the service type that the policy uses to protect the resource. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting AWS Support .

      Valid values: DNS_FIREWALL | NETWORK_FIREWALL | SECURITY_GROUPS_COMMON | SECURITY_GROUPS_CONTENT_AUDIT | SECURITY_GROUPS_USAGE_AUDIT | SHIELD_ADVANCED | THIRD_PARTY_FIREWALL | WAFV2 | WAF

      • ManagedServiceData - Details about the service that are specific to the service type, in JSON format.
      • Example: DNS_FIREWALL

      "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"

      Valid values for preProcessRuleGroups are between 1 and 99. Valid values for postProcessRuleGroups are between 9901 and 10000.

      • Example: NETWORK_FIREWALL - Centralized deployment model

      "{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

      With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

      With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig . To configure the Availability Zones in firewallCreationConfig , specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters.

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management

      "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall centralized deployment model

      "{ \"type\":\"THIRD_PARTY_FIREWALL\", \"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\", \"thirdPartyFirewallConfig\":{ \"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

      To use the distributed deployment model, you must set FirewallDeploymentModel to CENTRALIZED .

      • Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall distributed deployment model

      "{\"type\":\"THIRD_PARTY_FIREWALL\",\"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\",\"thirdPartyFirewallConfig\":{\"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{ \"distributedFirewallDeploymentModel\":{ \"distributedFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{ \"availabilityZoneConfigList\":[ {\"availabilityZoneName\":\"${AvailabilityZone}\" } ] } }, \"allowedIPV4CidrList\":[ ] } } } }"

      To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

      • Specification for SHIELD_ADVANCED for Amazon CloudFront distributions

      "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false}"

      For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}"

      The default value for automaticResponseStatus is IGNORED . The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED . The default value for overrideCustomerWebaclClassic is false .

      For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.

      • Example: WAFV2

      "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAmazonIpReputationList\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

      In the loggingConfiguration , you can specify one logDestinationConfigs , you can optionally provide up to 20 redactedFields , and the RedactedFieldType must be one of URI , QUERY_STRING , HEADER , or METHOD .

      • Example: AWS WAF Classic

      "{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"

      • Example: WAFV2 - AWS Firewall Manager support for AWS WAF managed rule group versioning

      "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

      To use a specific version of a AWS WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true , and set version to the version you'd like to use. If you don't set versionEnabled to true , or if you omit versionEnabled , then Firewall Manager uses the default version of the AWS WAF managed rule group.

      • Example: SECURITY_GROUPS_COMMON

      "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

      • Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns

      "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

      • Example: SECURITY_GROUPS_CONTENT_AUDIT

      "{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}"

      The security group action for content audit can be ALLOW or DENY . For ALLOW , all in-scope security group rules must be within the allowed range of the policy's security group rules. For DENY , all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.

      • Example: SECURITY_GROUPS_USAGE_AUDIT

      "{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"

    • getDeleteAllPolicyResources

      @Stability(Stable) @Nullable public Object getDeleteAllPolicyResources()
      Used when deleting a policy. If true , Firewall Manager performs cleanup according to the policy type.

      For AWS WAF and Shield Advanced policies, Firewall Manager does the following:

      • Deletes rule groups created by Firewall Manager
      • Removes web ACLs from in-scope resources
      • Deletes web ACLs that contain no rules or rule groups

      For security group policies, Firewall Manager does the following for each security group in the policy:

      • Disassociates the security group from in-scope resources
      • Deletes the security group if it was created through Firewall Manager and if it's no longer associated with any resources through another policy

      After the cleanup, in-scope resources are no longer protected by web ACLs in this policy. Protection of out-of-scope resources remains unchanged. Scope is determined by tags that you create and accounts that you associate with the policy. When creating the policy, if you specify that only resources in specific accounts or with specific tags are in scope of the policy, those accounts and resources are handled by the policy. All others are out of scope. If you don't specify tags or accounts, all resources are in scope.

    • setDeleteAllPolicyResources

      @Stability(Stable) public void setDeleteAllPolicyResources(@Nullable Boolean value)
      Used when deleting a policy. If true , Firewall Manager performs cleanup according to the policy type.

      For AWS WAF and Shield Advanced policies, Firewall Manager does the following:

      • Deletes rule groups created by Firewall Manager
      • Removes web ACLs from in-scope resources
      • Deletes web ACLs that contain no rules or rule groups

      For security group policies, Firewall Manager does the following for each security group in the policy:

      • Disassociates the security group from in-scope resources
      • Deletes the security group if it was created through Firewall Manager and if it's no longer associated with any resources through another policy

      After the cleanup, in-scope resources are no longer protected by web ACLs in this policy. Protection of out-of-scope resources remains unchanged. Scope is determined by tags that you create and accounts that you associate with the policy. When creating the policy, if you specify that only resources in specific accounts or with specific tags are in scope of the policy, those accounts and resources are handled by the policy. All others are out of scope. If you don't specify tags or accounts, all resources are in scope.

    • setDeleteAllPolicyResources

      @Stability(Stable) public void setDeleteAllPolicyResources(@Nullable IResolvable value)
      Used when deleting a policy. If true , Firewall Manager performs cleanup according to the policy type.

      For AWS WAF and Shield Advanced policies, Firewall Manager does the following:

      • Deletes rule groups created by Firewall Manager
      • Removes web ACLs from in-scope resources
      • Deletes web ACLs that contain no rules or rule groups

      For security group policies, Firewall Manager does the following for each security group in the policy:

      • Disassociates the security group from in-scope resources
      • Deletes the security group if it was created through Firewall Manager and if it's no longer associated with any resources through another policy

      After the cleanup, in-scope resources are no longer protected by web ACLs in this policy. Protection of out-of-scope resources remains unchanged. Scope is determined by tags that you create and accounts that you associate with the policy. When creating the policy, if you specify that only resources in specific accounts or with specific tags are in scope of the policy, those accounts and resources are handled by the policy. All others are out of scope. If you don't specify tags or accounts, all resources are in scope.

    • getExcludeMap

      @Stability(Stable) @Nullable public Object getExcludeMap()
      Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.

      Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

      You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

      You can specify account IDs, OUs, or a combination:

      • Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
      • Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
      • Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

    • setExcludeMap

      @Stability(Stable) public void setExcludeMap(@Nullable IResolvable value)
      Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.

      Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

      You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

      You can specify account IDs, OUs, or a combination:

      • Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
      • Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
      • Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

    • setExcludeMap

      @Stability(Stable) public void setExcludeMap(@Nullable CfnPolicy.IEMapProperty value)
      Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.

      Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

      You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

      You can specify account IDs, OUs, or a combination:

      • Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
      • Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
      • Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

    • getIncludeMap

      @Stability(Stable) @Nullable public Object getIncludeMap()
      Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.

      Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

      You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

      You can specify account IDs, OUs, or a combination:

      • Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
      • Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
      • Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

    • setIncludeMap

      @Stability(Stable) public void setIncludeMap(@Nullable IResolvable value)
      Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.

      Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

      You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

      You can specify account IDs, OUs, or a combination:

      • Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
      • Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
      • Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

    • setIncludeMap

      @Stability(Stable) public void setIncludeMap(@Nullable CfnPolicy.IEMapProperty value)
      Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.

      Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

      You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

      You can specify account IDs, OUs, or a combination:

      • Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
      • Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
      • Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

    • getPolicyDescription

      @Stability(Stable) @Nullable public String getPolicyDescription()
      The definition of the AWS Network Firewall firewall policy.

    • setPolicyDescription

      @Stability(Stable) public void setPolicyDescription(@Nullable String value)
      The definition of the AWS Network Firewall firewall policy.

    • getResourcesCleanUp

      @Stability(Stable) @Nullable public Object getResourcesCleanUp()
      Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope.

      For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.

      By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.

      This option is not available for Shield Advanced or AWS WAF Classic policies.

    • setResourcesCleanUp

      @Stability(Stable) public void setResourcesCleanUp(@Nullable Boolean value)
      Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope.

      For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.

      By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.

      This option is not available for Shield Advanced or AWS WAF Classic policies.

    • setResourcesCleanUp

      @Stability(Stable) public void setResourcesCleanUp(@Nullable IResolvable value)
      Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope.

      For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.

      By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.

      This option is not available for Shield Advanced or AWS WAF Classic policies.

    • getResourceSetIds

      @Stability(Stable) @Nullable public List<String> getResourceSetIds()
      The unique identifiers of the resource sets used by the policy.

    • setResourceSetIds

      @Stability(Stable) public void setResourceSetIds(@Nullable List<String> value)
      The unique identifiers of the resource sets used by the policy.

    • getResourceTags

      @Stability(Stable) @Nullable public Object getResourceTags()
      An array of ResourceTag objects, used to explicitly include resources in the policy scope or explicitly exclude them.

      If this isn't set, then tags aren't used to modify policy scope. See also ExcludeResourceTags .

    • setResourceTags

      @Stability(Stable) public void setResourceTags(@Nullable IResolvable value)
      An array of ResourceTag objects, used to explicitly include resources in the policy scope or explicitly exclude them.

      If this isn't set, then tags aren't used to modify policy scope. See also ExcludeResourceTags .

    • setResourceTags

      @Stability(Stable) public void setResourceTags(@Nullable List<Object> value)
      An array of ResourceTag objects, used to explicitly include resources in the policy scope or explicitly exclude them.

      If this isn't set, then tags aren't used to modify policy scope. See also ExcludeResourceTags .

    • getResourceType

      @Stability(Stable) @Nullable public String getResourceType()
      The type of resource protected by or in scope of the policy.

      This is in the format shown in the AWS Resource Types Reference . To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList .

      For AWS WAF and Shield Advanced, example resource types include AWS::ElasticLoadBalancingV2::LoadBalancer and AWS::CloudFront::Distribution . For a security group common policy, valid values are AWS::EC2::NetworkInterface and AWS::EC2::Instance . For a security group content audit policy, valid values are AWS::EC2::SecurityGroup , AWS::EC2::NetworkInterface , and AWS::EC2::Instance . For a security group usage audit policy, the value is AWS::EC2::SecurityGroup . For an AWS Network Firewall policy or DNS Firewall policy, the value is AWS::EC2::VPC .

    • setResourceType

      @Stability(Stable) public void setResourceType(@Nullable String value)
      The type of resource protected by or in scope of the policy.

      This is in the format shown in the AWS Resource Types Reference . To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList .

      For AWS WAF and Shield Advanced, example resource types include AWS::ElasticLoadBalancingV2::LoadBalancer and AWS::CloudFront::Distribution . For a security group common policy, valid values are AWS::EC2::NetworkInterface and AWS::EC2::Instance . For a security group content audit policy, valid values are AWS::EC2::SecurityGroup , AWS::EC2::NetworkInterface , and AWS::EC2::Instance . For a security group usage audit policy, the value is AWS::EC2::SecurityGroup . For an AWS Network Firewall policy or DNS Firewall policy, the value is AWS::EC2::VPC .

    • getResourceTypeList

      @Stability(Stable) @Nullable public List<String> getResourceTypeList()
      An array of ResourceType objects.

      Use this only to specify multiple resource types. To specify a single resource type, use ResourceType .

    • setResourceTypeList

      @Stability(Stable) public void setResourceTypeList(@Nullable List<String> value)
      An array of ResourceType objects.

      Use this only to specify multiple resource types. To specify a single resource type, use ResourceType .

    • getTags

      @Stability(Stable) @Nullable public List<CfnPolicy.PolicyTagProperty> getTags()
      A collection of key:value pairs associated with an AWS resource.

      The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each AWS resource.

    • setTags

      @Stability(Stable) public void setTags(@Nullable List<CfnPolicy.PolicyTagProperty> value)
      A collection of key:value pairs associated with an AWS resource.

      The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each AWS resource.