Class CfnChannel.H265SettingsProperty.Jsii$Proxy
- All Implemented Interfaces:
CfnChannel.H265SettingsProperty
,software.amazon.jsii.JsiiSerializable
- Enclosing interface:
CfnChannel.H265SettingsProperty
CfnChannel.H265SettingsProperty
-
Nested Class Summary
Nested classes/interfaces inherited from class software.amazon.jsii.JsiiObject
software.amazon.jsii.JsiiObject.InitializationMode
Nested classes/interfaces inherited from interface software.amazon.awscdk.services.medialive.CfnChannel.H265SettingsProperty
CfnChannel.H265SettingsProperty.Builder, CfnChannel.H265SettingsProperty.Jsii$Proxy
-
Constructor Summary
ModifierConstructorDescriptionprotected
Constructor that initializes the object based on literal property values passed by theCfnChannel.H265SettingsProperty.Builder
.protected
Jsii$Proxy
(software.amazon.jsii.JsiiObjectRef objRef) Constructor that initializes the object based on values retrieved from the JsiiObject. -
Method Summary
Modifier and TypeMethodDescriptioncom.fasterxml.jackson.databind.JsonNode
final boolean
final String
Adaptive quantization.final String
Indicates that AFD values will be written into the output stream.final String
Whether or not EML should insert an Alternative Transfer Function SEI message to support backwards compatibility with non-HDR decoders and displays.final Number
Average bitrate in bits/second.final Number
Size of buffer (HRD buffer model) in bits.final String
Includes colorspace metadata in the output.final Object
Color Space settings.final Object
Optional filters that you can apply to an encode.final String
Four bit AFD value to write on all frames of video in the output stream.final String
If set to enabled, adjust quantization within each frame to reduce flicker or 'pop' on I-frames.final Number
Framerate denominator.final Number
Framerate numerator - framerate is a fraction, e.g.final Number
Frequency of closed GOPs.final Number
GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits.final String
Indicates if the gopSize is specified in frames or seconds.final String
getLevel()
H.265 Level.final String
Amount of lookahead.final Number
For QVBR: See the tooltip for Quality level.final Number
Only meaningful if sceneChangeDetect is set to enabled.final Number
getMinQp()
final String
final String
final Number
Pixel Aspect Ratio denominator.final Number
Pixel Aspect Ratio numerator.final String
H.265 Profile.final Number
Controls the target quality for the video encode.final String
Rate control mode.final String
Sets the scan type of the output to progressive or top-field-first interlaced.final String
Scene change detection.final Number
Number of slices per picture.final String
getTier()
H.265 Tier.final Number
final String
final Number
final Object
final String
Determines how timecodes should be inserted into the video elementary stream.final String
final int
hashCode()
Methods inherited from class software.amazon.jsii.JsiiObject
jsiiAsyncCall, jsiiAsyncCall, jsiiCall, jsiiCall, jsiiGet, jsiiGet, jsiiSet, jsiiStaticCall, jsiiStaticCall, jsiiStaticGet, jsiiStaticGet, jsiiStaticSet, jsiiStaticSet
-
Constructor Details
-
Jsii$Proxy
protected Jsii$Proxy(software.amazon.jsii.JsiiObjectRef objRef) Constructor that initializes the object based on values retrieved from the JsiiObject.- Parameters:
objRef
- Reference to the JSII managed object.
-
Jsii$Proxy
Constructor that initializes the object based on literal property values passed by theCfnChannel.H265SettingsProperty.Builder
.
-
-
Method Details
-
getAdaptiveQuantization
Description copied from interface:CfnChannel.H265SettingsProperty
Adaptive quantization.Allows intra-frame quantizers to vary to improve visual quality.
- Specified by:
getAdaptiveQuantization
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getAfdSignaling
Description copied from interface:CfnChannel.H265SettingsProperty
Indicates that AFD values will be written into the output stream.If afdSignaling is "auto", the system will try to preserve the input AFD value (in cases where multiple AFD values are valid). If set to "fixed", the AFD value will be the value configured in the fixedAfd parameter.
- Specified by:
getAfdSignaling
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getAlternativeTransferFunction
Description copied from interface:CfnChannel.H265SettingsProperty
Whether or not EML should insert an Alternative Transfer Function SEI message to support backwards compatibility with non-HDR decoders and displays.- Specified by:
getAlternativeTransferFunction
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getBitrate
Description copied from interface:CfnChannel.H265SettingsProperty
Average bitrate in bits/second.Required when the rate control mode is VBR or CBR. Not used for QVBR. In an MS Smooth output group, each output must have a unique value when its bitrate is rounded down to the nearest multiple of 1000.
- Specified by:
getBitrate
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getBufSize
Description copied from interface:CfnChannel.H265SettingsProperty
Size of buffer (HRD buffer model) in bits.- Specified by:
getBufSize
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getColorMetadata
Description copied from interface:CfnChannel.H265SettingsProperty
Includes colorspace metadata in the output.- Specified by:
getColorMetadata
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getColorSpaceSettings
Description copied from interface:CfnChannel.H265SettingsProperty
Color Space settings.- Specified by:
getColorSpaceSettings
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getFilterSettings
Description copied from interface:CfnChannel.H265SettingsProperty
Optional filters that you can apply to an encode.- Specified by:
getFilterSettings
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getFixedAfd
Description copied from interface:CfnChannel.H265SettingsProperty
Four bit AFD value to write on all frames of video in the output stream.Only valid when afdSignaling is set to 'Fixed'.
- Specified by:
getFixedAfd
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getFlickerAq
Description copied from interface:CfnChannel.H265SettingsProperty
If set to enabled, adjust quantization within each frame to reduce flicker or 'pop' on I-frames.- Specified by:
getFlickerAq
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getFramerateDenominator
Description copied from interface:CfnChannel.H265SettingsProperty
Framerate denominator.- Specified by:
getFramerateDenominator
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getFramerateNumerator
Description copied from interface:CfnChannel.H265SettingsProperty
Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.- Specified by:
getFramerateNumerator
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getGopClosedCadence
Description copied from interface:CfnChannel.H265SettingsProperty
Frequency of closed GOPs.In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
- Specified by:
getGopClosedCadence
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getGopSize
Description copied from interface:CfnChannel.H265SettingsProperty
GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits.If gopSizeUnits is frames, gopSize must be an integer and must be greater than or equal to 1. If gopSizeUnits is seconds, gopSize must be greater than 0, but need not be an integer.
- Specified by:
getGopSize
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getGopSizeUnits
Description copied from interface:CfnChannel.H265SettingsProperty
Indicates if the gopSize is specified in frames or seconds.If seconds the system will convert the gopSize into a frame count at run time.
- Specified by:
getGopSizeUnits
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getLevel
Description copied from interface:CfnChannel.H265SettingsProperty
H.265 Level.- Specified by:
getLevel
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getLookAheadRateControl
Description copied from interface:CfnChannel.H265SettingsProperty
Amount of lookahead.A value of low can decrease latency and memory usage, while high can produce better quality for certain content.
- Specified by:
getLookAheadRateControl
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getMaxBitrate
Description copied from interface:CfnChannel.H265SettingsProperty
For QVBR: See the tooltip for Quality level.- Specified by:
getMaxBitrate
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getMinIInterval
Description copied from interface:CfnChannel.H265SettingsProperty
Only meaningful if sceneChangeDetect is set to enabled.Defaults to 5 if multiplex rate control is used. Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
- Specified by:
getMinIInterval
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getMinQp
- Specified by:
getMinQp
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getMvOverPictureBoundaries
- Specified by:
getMvOverPictureBoundaries
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getMvTemporalPredictor
- Specified by:
getMvTemporalPredictor
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getParDenominator
Description copied from interface:CfnChannel.H265SettingsProperty
Pixel Aspect Ratio denominator.- Specified by:
getParDenominator
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getParNumerator
Description copied from interface:CfnChannel.H265SettingsProperty
Pixel Aspect Ratio numerator.- Specified by:
getParNumerator
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getProfile
Description copied from interface:CfnChannel.H265SettingsProperty
H.265 Profile.- Specified by:
getProfile
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getQvbrQualityLevel
Description copied from interface:CfnChannel.H265SettingsProperty
Controls the target quality for the video encode.Applies only when the rate control mode is QVBR. Set values for the QVBR quality level field and Max bitrate field that suit your most important viewing devices. Recommended values are:
- Primary screen: Quality level: 8 to 10. Max bitrate: 4M
- PC or tablet: Quality level: 7. Max bitrate: 1.5M to 3M
- Smartphone: Quality level: 6. Max bitrate: 1M to 1.5M
- Specified by:
getQvbrQualityLevel
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getRateControlMode
Description copied from interface:CfnChannel.H265SettingsProperty
Rate control mode.QVBR: Quality will match the specified quality level except when it is constrained by the maximum bitrate. Recommended if you or your viewers pay for bandwidth. CBR: Quality varies, depending on the video complexity. Recommended only if you distribute your assets to devices that cannot handle variable bitrates. Multiplex: This rate control mode is only supported (and is required) when the video is being delivered to a MediaLive Multiplex in which case the rate control configuration is controlled by the properties within the Multiplex Program.
- Specified by:
getRateControlMode
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getScanType
Description copied from interface:CfnChannel.H265SettingsProperty
Sets the scan type of the output to progressive or top-field-first interlaced.- Specified by:
getScanType
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getSceneChangeDetect
Description copied from interface:CfnChannel.H265SettingsProperty
Scene change detection.- Specified by:
getSceneChangeDetect
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getSlices
Description copied from interface:CfnChannel.H265SettingsProperty
Number of slices per picture.Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures. This field is optional; when no value is specified the encoder will choose the number of slices based on encode resolution.
- Specified by:
getSlices
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getTier
Description copied from interface:CfnChannel.H265SettingsProperty
H.265 Tier.- Specified by:
getTier
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getTileHeight
- Specified by:
getTileHeight
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getTilePadding
- Specified by:
getTilePadding
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getTileWidth
- Specified by:
getTileWidth
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getTimecodeBurninSettings
- Specified by:
getTimecodeBurninSettings
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getTimecodeInsertion
Description copied from interface:CfnChannel.H265SettingsProperty
Determines how timecodes should be inserted into the video elementary stream.- 'disabled': Do not include timecodes
- 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config
- Specified by:
getTimecodeInsertion
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
getTreeblockSize
- Specified by:
getTreeblockSize
in interfaceCfnChannel.H265SettingsProperty
- See Also:
-
$jsii$toJson
@Internal public com.fasterxml.jackson.databind.JsonNode $jsii$toJson()- Specified by:
$jsii$toJson
in interfacesoftware.amazon.jsii.JsiiSerializable
-
equals
-
hashCode
public final int hashCode()
-