Stop a pipeline execution in CodePipeline - AWS CodePipeline
Stop a pipeline execution (console)Stop an Inbound Execution (Console)Stop a pipeline execution (CLI)Stop an Inbound Execution (CLI)

Stop a pipeline execution in CodePipeline

When a pipeline execution starts to run through a pipeline, it enters one stage at a time and locks the stage while all action executions in the stage are running. These in-progress actions must be handled in a way so that, when the pipeline execution is stopped, the actions are either allowed to complete or abandoned.

There are two ways to stop a pipeline execution:

  • Stop and wait: AWS CodePipeline waits to stop the execution until all in-progress actions are completed (that is, the actions have a Succeeded or Failed status). This option preserves in-progress actions. The execution is in a Stopping state until the in-progress actions are complete. Then the execution is in a Stopped state. The stage unlocks after the actions are complete.

    If you choose to stop and wait, and you change your mind while your execution is still in a Stopping state, you can then choose to abandon.

  • Stop and abandon: AWS CodePipeline stops the execution without waiting for in-progress actions to complete. The execution is in a Stopping state for a very short time while the in-progress actions are abandoned. After the execution is stopped, the action execution is in an Abandoned state while the pipeline execution is in a Stopped state. The stage unlocks.

    For a pipeline execution in a Stopped state, the actions in the stage where the execution stopped can be retried.

    Warning

    This option can lead to failed tasks or out of sequence tasks.

Stop a pipeline execution (console)

You can use the console to stop a pipeline execution. Choose an execution, and then choose the method for stopping the pipeline execution.

Note

You can also stop a pipeline execution that is an inbound execution. To learn more about stopping an inbound execution, see Stop an Inbound Execution (Console).

  1. Sign in to the AWS Management Console and open the CodePipeline console at http://console.aws.amazon.com/codesuite/codepipeline/home.

  2. Do one of the following:

    Note

    Before you stop an execution, we recommend that you disable the transition in front of the stage. This way, when the stage unlocks due to the stopped execution, the stage does not accept a subsequent pipeline execution.

    • In Name, choose the name of the pipeline with the execution you want to stop. On the pipeline details page, choose Stop execution.

    • Choose View history. On the history page, choose Stop execution.

  3. On the Stop execution page, under Select execution, choose the execution you want to stop.

    Note

    The execution is displayed only if it is still in progress. Executions that are already complete are not displayed.

    Image showing that the following option is selected in the console: Stop and wait

  4. Under Select an action to apply to execution, choose one of the following:

    • To make sure the execution does not stop until all in-progress actions are complete, choose Stop and wait.

      Note

      You cannot choose to stop and wait if the execution is already in a Stopping state, but you can choose to stop and abandon.

    • To stop without waiting for in-progress actions to complete, choose Stop and abandon.

      Warning

      This option can lead to failed tasks or out of sequence tasks.

  5. (Optional) Enter comments. These comments, along with the execution status, are displayed on the history page for the execution.

  6. Choose Stop.

    Important

    This action cannot be undone.

  7. View the execution status in the pipeline visualization as follows:

    • If you chose to stop and wait, the selected execution continues until in-progress actions are completed.

      • The success banner message is displayed at the top of the console.

      • In the current stage, in-progress actions continue in an InProgress state. While the actions are in progress, the pipeline execution is in a Stopping state.

        After the actions complete (that is, the action fails or succeeds), the pipeline execution changes to a Stopped state and the action changes to a Failed or Succeeded state. You can also view the action state on the execution details page. You can view the execution status on the execution history page or the execution details page.

      • The pipeline execution changes to a Stopping state briefly, and then it changes to a Stopped state. You can view the execution status on the execution history page or the execution details page.

    • If you chose to stop and abandon, the execution does not wait for in-progress actions to complete.

      • The success banner message is displayed at the top of the console.

      • In the current stage, in-progress actions change to a status of Abandoned. You can also view the action status on the execution details page.

      • The pipeline execution changes to a Stopping state briefly, and then it changes to a Stopped state. You can view the execution status on the execution history page or the execution details page.

    You can view the pipeline execution status in the execution history view and the detailed history view.

Stop an Inbound Execution (Console)

You can use the console to stop an inbound execution. An inbound execution is a pipeline execution that is waiting to enter a stage where the transition has been disabled. When the transition is enabled, an inbound execution that is InProgress continues to enter the stage. An inbound execution that is Stopped does not enter the stage.

Note

After an inbound execution has been stopped, it cannot be retried.

If you do not see an inbound execution, then there are no pending executions at a disabled stage transition.

  1. Sign in to the AWS Management Console and open the CodePipeline console at http://console.aws.amazon.com/codesuite/codepipeline/home.

    The names of all pipelines associated with your AWS account will be displayed.

  2. Choose the name of the pipeline for which you want to stop the inbound execution, Do one of the following:

    • In the Pipeline view, choose the inbound execution ID and then choose to stop the execution.

    • Choose the pipeline and choose View history. In the execution history, choose the inbound execution ID and then choose to stop the execution.

  3. In the Stop execution modal, follow the steps in the section above to select the execution ID and specify the stop method.

    Use the get-pipeline-state command to view the status of the inbound execution.

Stop a pipeline execution (CLI)

To use the AWS CLI to manually stop a pipeline, use the stop-pipeline-execution command with the following parameters:

  • Execution ID (required)

  • Comments (optional)

  • Pipeline name (required)

  • Abandon flag (optional, the default is false)

Command format:

aws codepipeline stop-pipeline-execution --pipeline-name Pipeline_Name –-pipeline-execution-id Execution_ID [--abandon | --no-abandon] [--reason STOP_EXECUTION_REASON]

  1. Open a terminal (Linux, macOS, or Unix) or command prompt (Windows).

  2. To stop a pipeline execution, choose one of the following:

    • To make sure the execution does not stop until all in-progress actions are complete, choose to stop and wait. You can do this by including the no-abandon parameter. If you do not specify the parameter, the command defaults to stop and wait. Use the AWS CLI to run the stop-pipeline-execution command, specifying the name of the pipeline and the execution ID. For example, to stop a pipeline named MyFirstPipeline with the stop and wait option specified:

      aws codepipeline stop-pipeline-execution --pipeline-name MyFirstPipeline --pipeline-execution-id d-EXAMPLE --no-abandon

      For example, to stop a pipeline named MyFirstPipeline, defaulting to the stop and wait option, and choosing to include comments:

      aws codepipeline stop-pipeline-execution --pipeline-name MyFirstPipeline --pipeline-execution-id d-EXAMPLE --reason "Stopping execution after the build action is done"
      Note

      You cannot choose to stop and wait if the execution is already in a Stopping state. You can choose to stop and abandon an execution that is already in a Stopping state.

    • To stop without waiting for in-progress actions to complete, choose to stop and abandon. Include the abandon parameter. Use the AWS CLI to run the stop-pipeline-execution command, specifying the name of the pipeline and the execution ID.

      For example, to stop a pipeline named MyFirstPipeline, specifying the abandon option, and choosing to include comments:

      aws codepipeline stop-pipeline-execution --pipeline-name MyFirstPipeline --pipeline-execution-id d-EXAMPLE --abandon --reason "Stopping execution for a bug fix"

Stop an Inbound Execution (CLI)

You can use the CLI to stop an inbound execution. An inbound execution is a pipeline execution that is waiting to enter a stage where the transition has been disabled. When the transition is enabled, an inbound execution that is InProgress continues to enter the stage. An inbound execution that is Stopped does not enter the stage.

Note

After an inbound execution has been stopped, it cannot be retried.

If you do not see an inbound execution, then there are no pending executions at a disabled stage transition.

To use the AWS CLI to manually stop an inbound execution, use the stop-pipeline-execution command with the following parameters:

  • Inbound Execution ID (required)

  • Comments (optional)

  • Pipeline name (required)

  • Abandon flag (optional, the default is false)

Command format:

aws codepipeline stop-pipeline-execution --pipeline-name Pipeline_Name –-pipeline-execution-id Inbound_Execution_ID [--abandon | --no-abandon] [--reason STOP_EXECUTION_REASON]

Follow the steps in the procedure above to enter the command and specify the stop method.

Use the get-pipeline-state command to view the status of the inbound execution.