Apple HLS passthrough procedure - AWS Elemental Live

Apple HLS passthrough procedure

Passthrough is enabled or disabled individually for each output, which means it can be applied differently for different outputs in the same group.

  1. If you have not already set up for manifest decoration, do so now; see Procedure to enable manifest decoration.

  2. In the Profile or Event screen, go to the Output Groups section at the bottom of the screen and display the tab for Apple HLS Output Group.

    1. In each output, open the PID Control section. You will note that the SCTE-35 field is automatically selected (because you set up for manifest decoration) and you cannot clear it .

    2. Complete the following field:

      • SCTE-35 PID field: Enter the ID of the PID where you want the SCTE-35 messages to go.

Result

All SCTE-35 messages from the input are included in the data stream of the relevant output.