Viewing offline volumes

You can't create or delete volume backups when the source volume is offline. You can use the volume show ONTAP CLI command to determine a volume's current status.

volume show -vserver svm-name

For information about accessing the ONTAP CLI on your file system, see Using the NetApp ONTAP CLI.

FsxIdabc12345::> volume show -vserver vs1
Vserver   Volume       Aggregate    State      Type       Size  Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
vs1       vol1         aggr1        online     RW          2GB      1.9GB    5%
vs1       vol1_dr      aggr0_dp     online     DP        200GB    160.0GB   20%
vs1       vol2         aggr0        online     RW        150GB    110.3GB   26%
vs1       vol2_dr      aggr0_dp     online     DP        150GB    110.3GB   26%
vs1       vol3         aggr1        online     RW        150GB    120.0GB   20%
vs1       vol3_dr      aggr1_dp     online     DP        150GB    120.0GB   20%
vs1       vol4         aggr1        online     RW        200GB    159.8GB   20%
7 entries were displayed.

To bring an offline volume back online, use the volume online ONTAP CLI command, as shown in the following example. If only one SVM (Vserver) exists, you do not need to specify the -vserver parameter.

FsxID-abcdef123456::> volume online -volume volume_name -vserver svm_name
   
Volume 'vs1:vol1' is now online.