EC2 launch template
AWS Elastic Disaster Recovery (AWS DRS) utilizes EC2 launch templates to launch drill and recovery EC2 instances for each source server. You can edit those templates for each source server directly from the AWS DRS console.
The EC2 launch template is created automatically for each source server that is added to AWS DRS upon the installation of the AWS Replication Agent.
Note
-
In most use cases, the EC2 launch template does not need to be edited.
-
You cannot use the same template for multiple servers.
-
Many EC2 launch template parameters can be changed, but some may not be used by the AWS DRS launch process and some may interfere with the AWS Elastic Disaster Recovery launch process.
-
You must set the EC2 launch template you want to use with AWS DRS as the default launch template.
To edit the EC2 template for a single servers, take the following steps:
-
Go to the Source servers page.
-
Select a source servers to update.
-
Under the Actions menu, select Edit EC2 launch settings and you will be navigated to the Edit EC2 launch template page within the AWS DRS console.
-
Change the settings according to your preferences.
-
Click Save settings.
Alternatively:
-
Go to the Source servers page.
-
Select a specific source server.
-
Go to the Lunch settings tab.
-
Click Edit in the EC2 launch template section.
EC2 launch template parameters
AWS Elastic Disaster Recovery (AWS DRS) EC2 launch settings are divided into basic and advanced settings.
The basic settings include:
-
Subnet – When you specify a subnet, this field defines where the instance will be launched. When selecting a subnet, only the default network interface will be updated. If you do not include a subnet, the launched instance will use the Region’s default subnet located in the default VPC.
Note
-
If you have a default VPC, you must modify the EC2 launch template and explicitly define the subnet in which to launch. Failure to do so will result in errors when launching drill or recovery instances.
-
For cross-AZ recovery, ensure that the staging area subnet and the subnets that you configure your recovery instances to launch in are not in the same AZ as your source EC2 instances. .
-
-
Security groups – The selected security groups to assign to the instance, applied to the subnet selected for the default network interface. If no security group is selected, there is no default value and no group will be used. Security groups can only be selected if a subnet is included.
-
Instance type – The default instance type to use when launching. If instance type right-sizing is active, the system will disregard this setting. If no instance type is included, a default value will be used.
-
Note
If you change your instance type and do not activate the instance right-sizing feature, then AWS Elastic Disaster Recovery will use the instance type determined by the Instance right-sizing feature and not the instance type you chose in the EC2 launch template. AWS Elastic Disaster Recovery verifies the instance type once per hour, as a result, if you did not activate the instance right-sizing feature, the first time instance launch may still utilize the instance type you set in the EC2 launch template, but any subsequent launches will utilize the right-sizing instance.
Advanced settings include additional parameters that add specific features to the EC2 template. If you choose not to include these parameters in the template, the specific capabilities will not be added.
The advanced settings include:
-
IAM instance profile – Attach a specific profile to the instance that will be launched. Make sure the instance profile has the AWSElasticDisasterRecoveryRecoveryInstancePolicy IAM policy attached in addition to any other policy.
-
Auto assign public IP – Automatically assign a public IP to the launched instance.
-
Termination protection – Protect the launched instance from accidental termination using the EC2 console.
-
Tenancy – Set tenancy information, such as dedicated host needed in conjunction with setting BYOL for Windows servers and Windows Home.
-
Capacity reservation – Apply reservation consideration to the launched instances.
-
Key pair – Associate a key pair with launched instances that are based on EC2 instances.
Note
AWS DRS only supports major EC2 template parameters. If you want to change values that are not supported by this feature, you can still do so by editing the EC2 launch template via the Amazon EC2 console:
-
Create a new EC2 template version with the required changes.
-
Mark it as default.
Important
Every time you modify an EC2 launch template on the Amazon EC2 console, a new version is created. AWS DRS uses the version that is marked as the default. if you prefer to use the EC2 launch template you just modified, make sure to mark it as the default. Changes made through the AWS DRS console are automatically set as the default version.
EC2 launch template tags – In addition to the basic and advanced settings, you can also add up to 50 tags. These will be transferred to your drill and recovery instances. Note that these tags may interfere with other tags that have already been added to the source server. Launch template tags always take precedence over tags set in the AWS DRS Console or tags manually added to the server.
Learn more about EC2 launch template settings and configuration options in this EC2 article.
EC2 template considerations
Revert to previous version – The right-sizing mechanism can fix issues such as an incorrect instance type, but other issues may still occur. If you encounter any issues with the launch template, you can quickly address them by choosing the original default launch template that was created by AWS DRS when the agent was installed. Alternatively, you can edit the relevant fields from the AWS DRS console.
Important
If you decide to create the EC2 template from the Amazon EC2 console, be sure not to change or edit the following fields:
-
RAM disk ID
-
Kernel
-
Nitro Enclave
-
Metadata accessible
These fields must remain unchanged for AWS Elastic Disaster Recovery to function properly.
