Interface AbuseSignalAsyncClient
- All Superinterfaces:
AutoCloseable,AwsClient,SdkAutoCloseable,SdkClient
builder() method.The asynchronous client performs non-blocking I/O when configured with any
SdkAsyncHttpClient supported in the SDK. However, full non-blocking is not guaranteed as the async client may
perform blocking calls in some cases such as credentials retrieval and endpoint discovery as part of the async API
call.
Amazon Web Services Abuse Signal API provides programmatic means to report suspected abuse of Amazon Web Services resources. You can use the API to submit abuse reports about Amazon Web Services resources and to track the status of your reports. Amazon Web Services Trust & Safety uses the information that you provide to investigate and try to resolve the incident that you reported.
You submit reports in the eXtended Abuse Reporting Format (XARF), an open standard for structured abuse reporting. For more information, see XARF on the XARF website. Reports can cover a wide range of abuse categories, including spam, phishing, distributed denial of service (DDoS), malware distribution, and copyright infringement.
With the Amazon Web Services Abuse Signal API, you can:
-
Submit abuse reports – Create structured abuse reports by using the XARF format, with full support for all XARF v4 report types.
-
Track report status – Monitor the processing status of submitted reports, from submission through resolution.
-
List and filter reports – Retrieve the status of all reports, with optional filtering by correlation ID.
-
Retry submissions safely – Safely retry report submissions without creating duplicates by using client tokens.
Cross-Region data residency: By submitting a report, you instruct Amazon Web Services to store it in all
supported Regions (us-east-1, us-west-2, and eu-west-2), including across the
United States and Europe. If data must remain in a single Region, do not include it in the report.
-
Field Summary
FieldsModifier and TypeFieldDescriptionstatic final StringValue for looking up the service's metadata from theServiceMetadataProvider.static final String -
Method Summary
Modifier and TypeMethodDescriptionbuilder()Create a builder that can be used to configure and create aAbuseSignalAsyncClient.static AbuseSignalAsyncClientcreate()Create aAbuseSignalAsyncClientwith the region loaded from theDefaultAwsRegionProviderChainand credentials loaded from theDefaultCredentialsProvider.createAbuseReport(Consumer<CreateAbuseReportRequest.Builder> createAbuseReportRequest) Submits a structured report.createAbuseReport(CreateAbuseReportRequest createAbuseReportRequest) Submits a structured report.getAbuseReportStatus(Consumer<GetAbuseReportStatusRequest.Builder> getAbuseReportStatusRequest) Retrieves the current processing status of a previously submitted abuse report, including the status, submission timestamp, and last-update time.getAbuseReportStatus(GetAbuseReportStatusRequest getAbuseReportStatusRequest) Retrieves the current processing status of a previously submitted abuse report, including the status, submission timestamp, and last-update time.listAbuseReportStatuses(Consumer<ListAbuseReportStatusesRequest.Builder> listAbuseReportStatusesRequest) Lists abuse report statuses for the calling account, ordered by submission time, with optional filtering and pagination.listAbuseReportStatuses(ListAbuseReportStatusesRequest listAbuseReportStatusesRequest) Lists abuse report statuses for the calling account, ordered by submission time, with optional filtering and pagination.default ListAbuseReportStatusesPublisherlistAbuseReportStatusesPaginator(Consumer<ListAbuseReportStatusesRequest.Builder> listAbuseReportStatusesRequest) This is a variant oflistAbuseReportStatuses(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesRequest)operation.default ListAbuseReportStatusesPublisherlistAbuseReportStatusesPaginator(ListAbuseReportStatusesRequest listAbuseReportStatusesRequest) This is a variant oflistAbuseReportStatuses(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesRequest)operation.The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfigurationdefault AbuseSignalAsyncWaiterwaiter()Create an instance ofAbuseSignalAsyncWaiterusing this client.Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
closeMethods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName
-
Field Details
-
SERVICE_NAME
- See Also:
-
SERVICE_METADATA_ID
Value for looking up the service's metadata from theServiceMetadataProvider.- See Also:
-
-
Method Details
-
createAbuseReport
default CompletableFuture<CreateAbuseReportResponse> createAbuseReport(CreateAbuseReportRequest createAbuseReportRequest) Submits a structured report. Amazon Web Services validates it and returns a report ID. A successful response confirms that Amazon Web Services received your report. It doesn't mean that Amazon Web Services has reached an outcome. Use GetAbuseReportStatus with the report ID to check the report's status and outcome.
This operation is idempotent within a time window. If you provide a
clientToken, duplicate requests within 24 hours return the existing report ID. If you omit it, the service generates a token scoped to 5 minutes.Cross-Region data residency: By submitting a report, you instruct Amazon Web Services to store it in all supported Regions (
us-east-1,us-west-2, andeu-west-2), including across the United States and Europe. If data must remain in a single Region, do not include it in the report.- Parameters:
createAbuseReportRequest- The input for a CreateAbuseReport request. Provide the report in XARF format, and optionally your own correlation ID and idempotency token.- Returns:
- A Java Future containing the result of the CreateAbuseReport operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- SubmissionRequirementException The report is well-formed and satisfies the XARF schema, but it does
not meet one or more submission requirements (for example, the submission lookback window or
source_identifierrestrictions). This error is distinct fromValidationException(HTTP 400), which indicates that the report is not well-formed. Retrying the same report will not succeed; the report content must change. - AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - ConflictException The request conflicts with the current state of the resource. For example, an idempotency token was reused with a different payload.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
createAbuseReport
default CompletableFuture<CreateAbuseReportResponse> createAbuseReport(Consumer<CreateAbuseReportRequest.Builder> createAbuseReportRequest) Submits a structured report. Amazon Web Services validates it and returns a report ID. A successful response confirms that Amazon Web Services received your report. It doesn't mean that Amazon Web Services has reached an outcome. Use GetAbuseReportStatus with the report ID to check the report's status and outcome.
This operation is idempotent within a time window. If you provide a
clientToken, duplicate requests within 24 hours return the existing report ID. If you omit it, the service generates a token scoped to 5 minutes.Cross-Region data residency: By submitting a report, you instruct Amazon Web Services to store it in all supported Regions (
us-east-1,us-west-2, andeu-west-2), including across the United States and Europe. If data must remain in a single Region, do not include it in the report.
This is a convenience which creates an instance of the
CreateAbuseReportRequest.Builderavoiding the need to create one manually viaCreateAbuseReportRequest.builder()- Parameters:
createAbuseReportRequest- AConsumerthat will call methods onCreateAbuseReportRequest.Builderto create a request. The input for a CreateAbuseReport request. Provide the report in XARF format, and optionally your own correlation ID and idempotency token.- Returns:
- A Java Future containing the result of the CreateAbuseReport operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- SubmissionRequirementException The report is well-formed and satisfies the XARF schema, but it does
not meet one or more submission requirements (for example, the submission lookback window or
source_identifierrestrictions). This error is distinct fromValidationException(HTTP 400), which indicates that the report is not well-formed. Retrying the same report will not succeed; the report content must change. - AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - ConflictException The request conflicts with the current state of the resource. For example, an idempotency token was reused with a different payload.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getAbuseReportStatus
default CompletableFuture<GetAbuseReportStatusResponse> getAbuseReportStatus(GetAbuseReportStatusRequest getAbuseReportStatusRequest) Retrieves the current processing status of a previously submitted abuse report, including the status, submission timestamp, and last-update time.
You can poll this operation to track the report's status.
PROCESSINGconfirms that Amazon Web Services received your report and is processing it.COMPLETEDmeans Amazon Web Services finished resolving the report, and the response includes areasonCode. The time to reachCOMPLETEDmay vary and can take up to several days depending on the scope and complexity of the suspected abuse.COMPLETEDis the only terminal status. To wait for a report, use theReportProcessingwaiter, which succeeds when the report reachesPROCESSINGorCOMPLETED. If you poll this operation yourself, wait 1–5 seconds between calls.- Parameters:
getAbuseReportStatusRequest- The input for a GetAbuseReportStatus request. Identifies the abuse report whose status you want to retrieve.- Returns:
- A Java Future containing the result of the GetAbuseReportStatus operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ResourceNotFoundException The specified resource was not found. Verify that the
reportIdis correct. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
getAbuseReportStatus
default CompletableFuture<GetAbuseReportStatusResponse> getAbuseReportStatus(Consumer<GetAbuseReportStatusRequest.Builder> getAbuseReportStatusRequest) Retrieves the current processing status of a previously submitted abuse report, including the status, submission timestamp, and last-update time.
You can poll this operation to track the report's status.
PROCESSINGconfirms that Amazon Web Services received your report and is processing it.COMPLETEDmeans Amazon Web Services finished resolving the report, and the response includes areasonCode. The time to reachCOMPLETEDmay vary and can take up to several days depending on the scope and complexity of the suspected abuse.COMPLETEDis the only terminal status. To wait for a report, use theReportProcessingwaiter, which succeeds when the report reachesPROCESSINGorCOMPLETED. If you poll this operation yourself, wait 1–5 seconds between calls.
This is a convenience which creates an instance of the
GetAbuseReportStatusRequest.Builderavoiding the need to create one manually viaGetAbuseReportStatusRequest.builder()- Parameters:
getAbuseReportStatusRequest- AConsumerthat will call methods onGetAbuseReportStatusRequest.Builderto create a request. The input for a GetAbuseReportStatus request. Identifies the abuse report whose status you want to retrieve.- Returns:
- A Java Future containing the result of the GetAbuseReportStatus operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ResourceNotFoundException The specified resource was not found. Verify that the
reportIdis correct. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listAbuseReportStatuses
default CompletableFuture<ListAbuseReportStatusesResponse> listAbuseReportStatuses(ListAbuseReportStatusesRequest listAbuseReportStatusesRequest) Lists abuse report statuses for the calling account, ordered by submission time, with optional filtering and pagination.
Use the
correlationIdparameter to filter results by the reporter-provided correlation ID that was specified during report submission.Results are paginated. Use
nextTokento retrieve additional results.- Parameters:
listAbuseReportStatusesRequest- The input for a ListAbuseReportStatuses request. Use it to filter results by correlation ID and to page through them.- Returns:
- A Java Future containing the result of the ListAbuseReportStatuses operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listAbuseReportStatuses
default CompletableFuture<ListAbuseReportStatusesResponse> listAbuseReportStatuses(Consumer<ListAbuseReportStatusesRequest.Builder> listAbuseReportStatusesRequest) Lists abuse report statuses for the calling account, ordered by submission time, with optional filtering and pagination.
Use the
correlationIdparameter to filter results by the reporter-provided correlation ID that was specified during report submission.Results are paginated. Use
nextTokento retrieve additional results.
This is a convenience which creates an instance of the
ListAbuseReportStatusesRequest.Builderavoiding the need to create one manually viaListAbuseReportStatusesRequest.builder()- Parameters:
listAbuseReportStatusesRequest- AConsumerthat will call methods onListAbuseReportStatusesRequest.Builderto create a request. The input for a ListAbuseReportStatuses request. Use it to filter results by correlation ID and to page through them.- Returns:
- A Java Future containing the result of the ListAbuseReportStatuses operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listAbuseReportStatusesPaginator
default ListAbuseReportStatusesPublisher listAbuseReportStatusesPaginator(ListAbuseReportStatusesRequest listAbuseReportStatusesRequest) This is a variant of
listAbuseReportStatuses(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesRequest)operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a newSubscriptioni.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper method
2) Using a custom subscribersoftware.amazon.awssdk.services.abusesignal.paginators.ListAbuseReportStatusesPublisher publisher = client.listAbuseReportStatusesPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.software.amazon.awssdk.services.abusesignal.paginators.ListAbuseReportStatusesPublisher publisher = client.listAbuseReportStatusesPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesResponse response) { //... }; });Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listAbuseReportStatuses(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesRequest)operation.- Parameters:
listAbuseReportStatusesRequest- The input for a ListAbuseReportStatuses request. Use it to filter results by correlation ID and to page through them.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listAbuseReportStatusesPaginator
default ListAbuseReportStatusesPublisher listAbuseReportStatusesPaginator(Consumer<ListAbuseReportStatusesRequest.Builder> listAbuseReportStatusesRequest) This is a variant of
listAbuseReportStatuses(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesRequest)operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a newSubscriptioni.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper method
2) Using a custom subscribersoftware.amazon.awssdk.services.abusesignal.paginators.ListAbuseReportStatusesPublisher publisher = client.listAbuseReportStatusesPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.software.amazon.awssdk.services.abusesignal.paginators.ListAbuseReportStatusesPublisher publisher = client.listAbuseReportStatusesPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesResponse response) { //... }; });Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listAbuseReportStatuses(software.amazon.awssdk.services.abusesignal.model.ListAbuseReportStatusesRequest)operation.
This is a convenience which creates an instance of the
ListAbuseReportStatusesRequest.Builderavoiding the need to create one manually viaListAbuseReportStatusesRequest.builder()- Parameters:
listAbuseReportStatusesRequest- AConsumerthat will call methods onListAbuseReportStatusesRequest.Builderto create a request. The input for a ListAbuseReportStatuses request. Use it to filter results by correlation ID and to page through them.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invokeThrowable.getCause()to retrieve the underlying exception.- ThrottlingException The request was denied due to request throttling. This error is retryable; retry with exponential backoff.
- AccessDeniedException The caller does not have sufficient access to perform this operation. Verify
that the caller has the specific IAM permission for the operation it is calling (for example,
abuse:CreateAbuseReport,abuse:GetAbuseReportStatus, orabuse:ListAbuseReportStatuses). Grant only the actions each caller requires. - InternalServerException An unexpected error occurred during the processing of the request. This error
is retryable; check the
Retry-Afterheader before you retry. - ValidationException The input fails to satisfy the constraints specified by the service, which
indicates that the request is not well-formed. Check
fieldListfor the specific members that failed validation. - SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- AbuseSignalException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
waiter
Create an instance ofAbuseSignalAsyncWaiterusing this client.Waiters created via this method are managed by the SDK and resources will be released when the service client is closed.
- Returns:
- an instance of
AbuseSignalAsyncWaiter
-
serviceClientConfiguration
Description copied from interface:SdkClientThe SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration- Specified by:
serviceClientConfigurationin interfaceAwsClient- Specified by:
serviceClientConfigurationin interfaceSdkClient- Returns:
- SdkServiceClientConfiguration
-
create
Create aAbuseSignalAsyncClientwith the region loaded from theDefaultAwsRegionProviderChainand credentials loaded from theDefaultCredentialsProvider. -
builder
Create a builder that can be used to configure and create aAbuseSignalAsyncClient.
-