Interface CreateConnectAttachmentRequest.Builder

All Superinterfaces:

AwsRequest.Builder, Buildable, CopyableBuilder<CreateConnectAttachmentRequest.Builder,CreateConnectAttachmentRequest>, NetworkManagerRequest.Builder, SdkBuilder<CreateConnectAttachmentRequest.Builder,CreateConnectAttachmentRequest>, SdkPojo, SdkRequest.Builder

Enclosing class:

CreateConnectAttachmentRequest

@Mutable
@NotThreadSafe
public static interface CreateConnectAttachmentRequest.Builder
extends NetworkManagerRequest.Builder, SdkPojo, CopyableBuilder<CreateConnectAttachmentRequest.Builder,CreateConnectAttachmentRequest>

Method Summary

Modifier and Type	Method	Description
CreateConnectAttachmentRequest.Builder	clientToken(String clientToken)	The client token associated with the request.
CreateConnectAttachmentRequest.Builder	coreNetworkId(String coreNetworkId)	The ID of a core network where you want to create the attachment.
CreateConnectAttachmentRequest.Builder	edgeLocation(String edgeLocation)	The Region where the edge is located.
CreateConnectAttachmentRequest.Builder	natGatewayRules(Collection<NatRuleRequest> natGatewayRules)	The NAT rules for the Connect attachment, up to 50 rules.
CreateConnectAttachmentRequest.Builder	natGatewayRules(Consumer<NatRuleRequest.Builder>... natGatewayRules)	The NAT rules for the Connect attachment, up to 50 rules.
CreateConnectAttachmentRequest.Builder	natGatewayRules(NatRuleRequest... natGatewayRules)	The NAT rules for the Connect attachment, up to 50 rules.
CreateConnectAttachmentRequest.Builder	natGatewaySupport(String natGatewaySupport)	Specifies whether to enable NAT gateway support on the Connect attachment.
CreateConnectAttachmentRequest.Builder	natGatewaySupport(NatGatewaySupportValue natGatewaySupport)	Specifies whether to enable NAT gateway support on the Connect attachment.
default CreateConnectAttachmentRequest.Builder	options(Consumer<ConnectAttachmentOptions.Builder> options)	Options for creating an attachment.
CreateConnectAttachmentRequest.Builder	options(ConnectAttachmentOptions options)	Options for creating an attachment.
CreateConnectAttachmentRequest.Builder	overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)	Add an optional request override configuration.
CreateConnectAttachmentRequest.Builder	overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)	Add an optional request override configuration.
CreateConnectAttachmentRequest.Builder	routingPolicyLabel(String routingPolicyLabel)	The routing policy label to apply to the Connect attachment for traffic routing decisions.
CreateConnectAttachmentRequest.Builder	tags(Collection<Tag> tags)	The list of key-value tags associated with the request.
CreateConnectAttachmentRequest.Builder	tags(Consumer<Tag.Builder>... tags)	The list of key-value tags associated with the request.
CreateConnectAttachmentRequest.Builder	tags(Tag... tags)	The list of key-value tags associated with the request.
CreateConnectAttachmentRequest.Builder	transportAttachmentId(String transportAttachmentId)	The ID of the attachment between the two connections.

Methods inherited from interface software.amazon.awssdk.awscore.AwsRequest.Builder

overrideConfiguration

Methods inherited from interface software.amazon.awssdk.utils.builder.CopyableBuilder

copy

Methods inherited from interface software.amazon.awssdk.services.networkmanager.model.NetworkManagerRequest.Builder

build

Methods inherited from interface software.amazon.awssdk.utils.builder.SdkBuilder

applyMutation, build

Methods inherited from interface software.amazon.awssdk.core.SdkPojo

equalsBySdkFields, sdkFieldNameToField, sdkFields

Method Details

coreNetworkId

CreateConnectAttachmentRequest.Builder coreNetworkId(String coreNetworkId)

The ID of a core network where you want to create the attachment.

Parameters:

coreNetworkId - The ID of a core network where you want to create the attachment.

Returns:

Returns a reference to this object so that method calls can be chained together.

edgeLocation

CreateConnectAttachmentRequest.Builder edgeLocation(String edgeLocation)

The Region where the edge is located.

Parameters:

edgeLocation - The Region where the edge is located.

Returns:

Returns a reference to this object so that method calls can be chained together.

transportAttachmentId

CreateConnectAttachmentRequest.Builder transportAttachmentId(String transportAttachmentId)

The ID of the attachment between the two connections.

Parameters:

transportAttachmentId - The ID of the attachment between the two connections.

Returns:

Returns a reference to this object so that method calls can be chained together.

routingPolicyLabel

CreateConnectAttachmentRequest.Builder routingPolicyLabel(String routingPolicyLabel)

The routing policy label to apply to the Connect attachment for traffic routing decisions.

Parameters:

routingPolicyLabel - The routing policy label to apply to the Connect attachment for traffic routing decisions.

Returns:

Returns a reference to this object so that method calls can be chained together.

natGatewaySupport

CreateConnectAttachmentRequest.Builder natGatewaySupport(String natGatewaySupport)

Specifies whether to enable NAT gateway support on the Connect attachment. NAT is supported only on Connect attachments that use the GRE tunnel protocol. Tunnel-less Connect attachments aren't supported. To enable NAT gateway support, you must also specify at least one NAT rule. If you don't specify a value, NAT gateway support is disabled. Only the core network owner can configure NAT on an attachment.

Parameters:

natGatewaySupport - Specifies whether to enable NAT gateway support on the Connect attachment. NAT is supported only on Connect attachments that use the GRE tunnel protocol. Tunnel-less Connect attachments aren't supported. To enable NAT gateway support, you must also specify at least one NAT rule. If you don't specify a value, NAT gateway support is disabled. Only the core network owner can configure NAT on an attachment.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

• NatGatewaySupportValue
• NatGatewaySupportValue

natGatewaySupport

CreateConnectAttachmentRequest.Builder natGatewaySupport(NatGatewaySupportValue natGatewaySupport)

Specifies whether to enable NAT gateway support on the Connect attachment. NAT is supported only on Connect attachments that use the GRE tunnel protocol. Tunnel-less Connect attachments aren't supported. To enable NAT gateway support, you must also specify at least one NAT rule. If you don't specify a value, NAT gateway support is disabled. Only the core network owner can configure NAT on an attachment.

Parameters:

natGatewaySupport - Specifies whether to enable NAT gateway support on the Connect attachment. NAT is supported only on Connect attachments that use the GRE tunnel protocol. Tunnel-less Connect attachments aren't supported. To enable NAT gateway support, you must also specify at least one NAT rule. If you don't specify a value, NAT gateway support is disabled. Only the core network owner can configure NAT on an attachment.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

• NatGatewaySupportValue
• NatGatewaySupportValue

natGatewayRules

CreateConnectAttachmentRequest.Builder natGatewayRules(Collection<NatRuleRequest> natGatewayRules)

The NAT rules for the Connect attachment, up to 50 rules.

Parameters:

natGatewayRules - The NAT rules for the Connect attachment, up to 50 rules.

Returns:

Returns a reference to this object so that method calls can be chained together.

natGatewayRules

CreateConnectAttachmentRequest.Builder natGatewayRules(NatRuleRequest... natGatewayRules)

The NAT rules for the Connect attachment, up to 50 rules.

Parameters:

natGatewayRules - The NAT rules for the Connect attachment, up to 50 rules.

Returns:

Returns a reference to this object so that method calls can be chained together.

natGatewayRules

CreateConnectAttachmentRequest.Builder natGatewayRules(Consumer<NatRuleRequest.Builder>... natGatewayRules)

The NAT rules for the Connect attachment, up to 50 rules.

This is a convenience method that creates an instance of the NatRuleRequest.Builder avoiding the need to create one manually via NatRuleRequest.builder() .

When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to natGatewayRules(List<NatRuleRequest>).

Parameters:

natGatewayRules - a consumer that will call methods on NatRuleRequest.Builder

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

• natGatewayRules(java.util.Collection<NatRuleRequest>)

options

CreateConnectAttachmentRequest.Builder options(ConnectAttachmentOptions options)

Options for creating an attachment.

Parameters:

options - Options for creating an attachment.

Returns:

Returns a reference to this object so that method calls can be chained together.

options

default CreateConnectAttachmentRequest.Builder options(Consumer<ConnectAttachmentOptions.Builder> options)

Options for creating an attachment.

This is a convenience method that creates an instance of the ConnectAttachmentOptions.Builder avoiding the need to create one manually via ConnectAttachmentOptions.builder().

When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to options(ConnectAttachmentOptions).

Parameters:

options - a consumer that will call methods on ConnectAttachmentOptions.Builder

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

• options(ConnectAttachmentOptions)

tags

CreateConnectAttachmentRequest.Builder tags(Collection<Tag> tags)

The list of key-value tags associated with the request.

Parameters:

tags - The list of key-value tags associated with the request.

Returns:

Returns a reference to this object so that method calls can be chained together.

tags

CreateConnectAttachmentRequest.Builder tags(Tag... tags)

The list of key-value tags associated with the request.

Parameters:

tags - The list of key-value tags associated with the request.

Returns:

Returns a reference to this object so that method calls can be chained together.

tags

CreateConnectAttachmentRequest.Builder tags(Consumer<Tag.Builder>... tags)

The list of key-value tags associated with the request.

This is a convenience method that creates an instance of the Tag.Builder avoiding the need to create one manually via Tag.builder().

When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to tags(List<Tag>).

Parameters:

tags - a consumer that will call methods on Tag.Builder

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

• tags(java.util.Collection<Tag>)

clientToken

CreateConnectAttachmentRequest.Builder clientToken(String clientToken)

The client token associated with the request.

Parameters:

clientToken - The client token associated with the request.

Returns:

Returns a reference to this object so that method calls can be chained together.

overrideConfiguration

CreateConnectAttachmentRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)

Description copied from interface: AwsRequest.Builder

Add an optional request override configuration.

Specified by:

overrideConfiguration in interface AwsRequest.Builder

Parameters:

overrideConfiguration - The override configuration.

Returns:

This object for method chaining.

overrideConfiguration

CreateConnectAttachmentRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)

Description copied from interface: AwsRequest.Builder

Add an optional request override configuration.

Specified by:

overrideConfiguration in interface AwsRequest.Builder

Parameters:

builderConsumer - A Consumer to which an empty AwsRequestOverrideConfiguration.Builder will be given.

Returns:

This object for method chaining.