Class SubnetConnectivityOverride

java.lang.Object
software.amazon.awssdk.services.networksecuritymanager.model.SubnetConnectivityOverride
All Implemented Interfaces:
Serializable, SdkPojo, ToCopyableBuilder<SubnetConnectivityOverride.Builder,SubnetConnectivityOverride>

@Generated("software.amazon.awssdk:codegen") public final class SubnetConnectivityOverride extends Object implements SdkPojo, Serializable, ToCopyableBuilder<SubnetConnectivityOverride.Builder,SubnetConnectivityOverride>

An override that applies a connectivity treatment to the subnets that a scope selects, instead of the policy's defaultSubnetConnectivity.

See Also:
  • Method Details

    • connectivityType

      public final SubnetConnectivity connectivityType()

      The connectivity treatment to apply to the selected subnets. You select both the override value as well as the subnets they apply to. The Network Firewall automated internet firewall applies the override value to the specified subnets, and applies the default connectivity to the rest of the subnets. Valid values:

      • flexible – Sets the connectivity for each network interface in the subnet based on whether it is associated with a public IP address. A network interface with a public IP address gets bidirectional internet connectivity. A network interface without a public IP address gets outbound-only connectivity. All traffic is inspected against your firewall rules.

      • bidirectional – Provides bidirectional internet connectivity to every network interface that has a public IP association. Any network interface without a public IP cannot communicate with the internet unless a NAT device is explicitly inserted in the path. All inbound and outbound traffic is inspected against your firewall rules.

      • outbound-only – Provides egress-only connectivity for all network interfaces in the subnet. All outbound traffic and inbound responses are inspected against your firewall rules. Unsolicited inbound connections are dropped. For IPv4 traffic, the Network Firewall automated internet firewall performs NAT.

      • exclude – The Network Firewall automated internet firewall doesn't inspect traffic for the selected subnets. The subnets bypass the firewall entirely, and their traffic passes directly through the internet gateway. You can specify this value only in an override, not as the defaultSubnetConnectivity.

      If the service returns an enum value that is not available in the current SDK version, connectivityType will return SubnetConnectivity.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from connectivityTypeAsString().

      Returns:
      The connectivity treatment to apply to the selected subnets. You select both the override value as well as the subnets they apply to. The Network Firewall automated internet firewall applies the override value to the specified subnets, and applies the default connectivity to the rest of the subnets. Valid values:

      • flexible – Sets the connectivity for each network interface in the subnet based on whether it is associated with a public IP address. A network interface with a public IP address gets bidirectional internet connectivity. A network interface without a public IP address gets outbound-only connectivity. All traffic is inspected against your firewall rules.

      • bidirectional – Provides bidirectional internet connectivity to every network interface that has a public IP association. Any network interface without a public IP cannot communicate with the internet unless a NAT device is explicitly inserted in the path. All inbound and outbound traffic is inspected against your firewall rules.

      • outbound-only – Provides egress-only connectivity for all network interfaces in the subnet. All outbound traffic and inbound responses are inspected against your firewall rules. Unsolicited inbound connections are dropped. For IPv4 traffic, the Network Firewall automated internet firewall performs NAT.

      • exclude – The Network Firewall automated internet firewall doesn't inspect traffic for the selected subnets. The subnets bypass the firewall entirely, and their traffic passes directly through the internet gateway. You can specify this value only in an override, not as the defaultSubnetConnectivity.

      See Also:
    • connectivityTypeAsString

      public final String connectivityTypeAsString()

      The connectivity treatment to apply to the selected subnets. You select both the override value as well as the subnets they apply to. The Network Firewall automated internet firewall applies the override value to the specified subnets, and applies the default connectivity to the rest of the subnets. Valid values:

      • flexible – Sets the connectivity for each network interface in the subnet based on whether it is associated with a public IP address. A network interface with a public IP address gets bidirectional internet connectivity. A network interface without a public IP address gets outbound-only connectivity. All traffic is inspected against your firewall rules.

      • bidirectional – Provides bidirectional internet connectivity to every network interface that has a public IP association. Any network interface without a public IP cannot communicate with the internet unless a NAT device is explicitly inserted in the path. All inbound and outbound traffic is inspected against your firewall rules.

      • outbound-only – Provides egress-only connectivity for all network interfaces in the subnet. All outbound traffic and inbound responses are inspected against your firewall rules. Unsolicited inbound connections are dropped. For IPv4 traffic, the Network Firewall automated internet firewall performs NAT.

      • exclude – The Network Firewall automated internet firewall doesn't inspect traffic for the selected subnets. The subnets bypass the firewall entirely, and their traffic passes directly through the internet gateway. You can specify this value only in an override, not as the defaultSubnetConnectivity.

      If the service returns an enum value that is not available in the current SDK version, connectivityType will return SubnetConnectivity.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from connectivityTypeAsString().

      Returns:
      The connectivity treatment to apply to the selected subnets. You select both the override value as well as the subnets they apply to. The Network Firewall automated internet firewall applies the override value to the specified subnets, and applies the default connectivity to the rest of the subnets. Valid values:

      • flexible – Sets the connectivity for each network interface in the subnet based on whether it is associated with a public IP address. A network interface with a public IP address gets bidirectional internet connectivity. A network interface without a public IP address gets outbound-only connectivity. All traffic is inspected against your firewall rules.

      • bidirectional – Provides bidirectional internet connectivity to every network interface that has a public IP association. Any network interface without a public IP cannot communicate with the internet unless a NAT device is explicitly inserted in the path. All inbound and outbound traffic is inspected against your firewall rules.

      • outbound-only – Provides egress-only connectivity for all network interfaces in the subnet. All outbound traffic and inbound responses are inspected against your firewall rules. Unsolicited inbound connections are dropped. For IPv4 traffic, the Network Firewall automated internet firewall performs NAT.

      • exclude – The Network Firewall automated internet firewall doesn't inspect traffic for the selected subnets. The subnets bypass the firewall entirely, and their traffic passes directly through the internet gateway. You can specify this value only in an override, not as the defaultSubnetConnectivity.

      See Also:
    • hasScopes

      public final boolean hasScopes()
      For responses, this returns true if the service returned a value for the Scopes property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • scopes

      public final List<String> scopes()

      A list that contains the Amazon Resource Name (ARN) of the scope that selects the subnets to override. The list must contain exactly one scope ARN. The deployment determines which accounts are in scope, and the referenced scope selects subnets within those accounts.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasScopes() method.

      Returns:
      A list that contains the Amazon Resource Name (ARN) of the scope that selects the subnets to override. The list must contain exactly one scope ARN. The deployment determines which accounts are in scope, and the referenced scope selects subnets within those accounts.
    • toBuilder

      Description copied from interface: ToCopyableBuilder
      Take this object and create a builder that contains all of the current property values of this object.
      Specified by:
      toBuilder in interface ToCopyableBuilder<SubnetConnectivityOverride.Builder,SubnetConnectivityOverride>
      Returns:
      a builder for type T
    • builder

      public static SubnetConnectivityOverride.Builder builder()
    • serializableBuilderClass

      public static Class<? extends SubnetConnectivityOverride.Builder> serializableBuilderClass()
    • hashCode

      public final int hashCode()
      Overrides:
      hashCode in class Object
    • equals

      public final boolean equals(Object obj)
      Overrides:
      equals in class Object
    • equalsBySdkFields

      public final boolean equalsBySdkFields(Object obj)
      Description copied from interface: SdkPojo
      Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in an SdkPojo class, and is generated based on a service model.

      If an SdkPojo class does not have any inherited fields, equalsBySdkFields and equals are essentially the same.

      Specified by:
      equalsBySdkFields in interface SdkPojo
      Parameters:
      obj - the object to be compared with
      Returns:
      true if the other object equals to this object by sdk fields, false otherwise.
    • toString

      public final String toString()
      Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
      Overrides:
      toString in class Object
    • getValueForField

      public final <T> Optional<T> getValueForField(String fieldName, Class<T> clazz)
    • sdkFields

      public final List<SdkField<?>> sdkFields()
      Specified by:
      sdkFields in interface SdkPojo
      Returns:
      List of SdkField in this POJO. May be empty list but should never be null.
    • sdkFieldNameToField

      public final Map<String,SdkField<?>> sdkFieldNameToField()
      Specified by:
      sdkFieldNameToField in interface SdkPojo
      Returns:
      The mapping between the field name and its corresponding field.