DynamoDB용 Java 클라이언트측 암호화 라이브러리 버전 3.x로 마이그레이션

public class MigrationExampleStep1 {

    public static void MigrationStep1(String kmsKeyId, String ddbTableName, int sortReadValue) {
        // 1. Create a Keyring.
        //    This example creates an AWS KMS Keyring that specifies the 
        //    same kmsKeyId previously used in the version 2.x configuration.
        //    It uses the 'CreateMrkMultiKeyring' method to create the 
        //    keyring, so that the keyring can correctly handle both single
        //    region and Multi-Region KMS Keys.
        //    Note that this example uses the AWS SDK for Java v2 KMS client.
        final MaterialProviders matProv = MaterialProviders.builder()
                .MaterialProvidersConfig(MaterialProvidersConfig.builder().build())
                .build();
        final CreateAwsKmsMrkMultiKeyringInput keyringInput = CreateAwsKmsMrkMultiKeyringInput.builder()
                .generator(kmsKeyId)
                .build();
        final IKeyring kmsKeyring = matProv.CreateAwsKmsMrkMultiKeyring(keyringInput);

        // 2. Create a Table Schema over your annotated class.
        //    For guidance on using the new attribute actions 
        //    annotations, see SimpleClass.java in the 
        //    aws-database-encryption-sdk-dynamodb GitHub repository. 
        //    All primary key attributes must be signed but not encrypted 
        //    and by default all non-primary key attributes 
        //    are encrypted and signed (ENCRYPT_AND_SIGN).
        //    If you want a particular non-primary key attribute to be signed but
        //    not encrypted, use the 'DynamoDbEncryptionSignOnly' annotation.
        //    If you want a particular attribute to be neither signed nor encrypted
        //    (DO_NOTHING), use the 'DynamoDbEncryptionDoNothing' annotation.
        final TableSchema<SimpleClass> schemaOnEncrypt = TableSchema.fromBean(SimpleClass.class);

        // 3. Define which attributes the client should expect to be excluded 
        //    from the signature when reading items.
        //    This value represents all unsigned attributes across the entire 
        //    dataset.
        final List<String> allowedUnsignedAttributes = Arrays.asList("attribute3");

        // 4. Configure an explicit map of the attribute actions configured 
        //    in your version 2.x modeled class.
        final Map<String, CryptoAction> legacyActions = new HashMap<>();
        legacyActions.put("partition_key", CryptoAction.SIGN_ONLY);
        legacyActions.put("sort_key", CryptoAction.SIGN_ONLY);
        legacyActions.put("attribute1", CryptoAction.ENCRYPT_AND_SIGN);
        legacyActions.put("attribute2", CryptoAction.SIGN_ONLY);
        legacyActions.put("attribute3", CryptoAction.DO_NOTHING);

        // 5. Configure the DynamoDBEncryptor that you used in version 2.x.
        final AWSKMS kmsClient = AWSKMSClientBuilder.defaultClient();
        final DirectKmsMaterialProvider cmp = new DirectKmsMaterialProvider(kmsClient, kmsKeyId);
        final DynamoDBEncryptor oldEncryptor = DynamoDBEncryptor.getInstance(cmp);

        // 6. Configure the legacy behavior.
        //    Input the DynamoDBEncryptor and attribute actions created in 
        //    the previous steps. For Legacy Policy, use 
        //    'FORCE_LEGACY_ENCRYPT_ALLOW_LEGACY_DECRYPT'. This policy continues to read 
        //    and write items using the old format, but will be able to read
        //    items written in the new format as soon as they appear.
        final LegacyOverride legacyOverride = LegacyOverride
                .builder()
                .encryptor(oldEncryptor)
                .policy(LegacyPolicy.FORCE_LEGACY_ENCRYPT_ALLOW_LEGACY_DECRYPT)
                .attributeActionsOnEncrypt(legacyActions)
                .build();

        // 7. Create a DynamoDbEncryptionInterceptor with the above configuration.
        final Map<String, DynamoDbEnhancedTableEncryptionConfig> tableConfigs = new HashMap<>();
        tableConfigs.put(ddbTableName,
                DynamoDbEnhancedTableEncryptionConfig.builder()
                        .logicalTableName(ddbTableName)
                        .keyring(kmsKeyring)
                        .allowedUnsignedAttributes(allowedUnsignedAttributes)
                        .schemaOnEncrypt(tableSchema)
                        .legacyOverride(legacyOverride)
                        .build());
        final DynamoDbEncryptionInterceptor interceptor =
                DynamoDbEnhancedClientEncryption.CreateDynamoDbEncryptionInterceptor(
                        CreateDynamoDbEncryptionInterceptorInput.builder()
                                .tableEncryptionConfigs(tableConfigs)
                                .build()
                );

        // 8. Create a new AWS SDK DynamoDb client using the 
        //    interceptor from Step 7.
        final DynamoDbClient ddb = DynamoDbClient.builder()
                .overrideConfiguration(
                        ClientOverrideConfiguration.builder()
                                .addExecutionInterceptor(interceptor)
                                .build())
                .build();

        // 9. Create the DynamoDbEnhancedClient using the AWS SDK DynamoDb client 
        //    created in Step 8, and create a table with your modeled class.
        final DynamoDbEnhancedClient enhancedClient = DynamoDbEnhancedClient.builder()
                .dynamoDbClient(ddb)
                .build();
        final DynamoDbTable<SimpleClass> table = enhancedClient.table(ddbTableName, tableSchema);
    }
}

public class MigrationExampleStep2 {

    public static void MigrationStep2(String kmsKeyId, String ddbTableName, int sortReadValue) {
        // 1. Continue to configure your keyring, table schema, legacy 
        //    attribute actions, allowedUnsignedAttributes, and 
        //    DynamoDBEncryptor as you did in Step 1.
        final MaterialProviders matProv = MaterialProviders.builder()
                .MaterialProvidersConfig(MaterialProvidersConfig.builder().build())
                .build();
        final CreateAwsKmsMrkMultiKeyringInput keyringInput = CreateAwsKmsMrkMultiKeyringInput.builder()
                .generator(kmsKeyId)
                .build();
        final IKeyring kmsKeyring = matProv.CreateAwsKmsMrkMultiKeyring(keyringInput);

        final TableSchema<SimpleClass> schemaOnEncrypt = TableSchema.fromBean(SimpleClass.class);

        final List<String> allowedUnsignedAttributes = Arrays.asList("attribute3");

        final Map<String, CryptoAction> legacyActions = new HashMap<>();
        legacyActions.put("partition_key", CryptoAction.SIGN_ONLY);
        legacyActions.put("sort_key", CryptoAction.SIGN_ONLY);
        legacyActions.put("attribute1", CryptoAction.ENCRYPT_AND_SIGN);
        legacyActions.put("attribute2", CryptoAction.SIGN_ONLY);
        legacyActions.put("attribute3", CryptoAction.DO_NOTHING);

        final AWSKMS kmsClient = AWSKMSClientBuilder.defaultClient();
        final DirectKmsMaterialProvider cmp = new DirectKmsMaterialProvider(kmsClient, kmsKeyId);
        final DynamoDBEncryptor oldEncryptor = DynamoDBEncryptor.getInstance(cmp);

        // 2. Update your legacy behavior to only write new items using the new
        //    format. 
        //    For Legacy Policy, use 'FORBID_LEGACY_ENCRYPT_ALLOW_LEGACY_DECRYPT'. This policy
        //    continues to read items in both formats, but will only write items
        //    using the new format.
        final LegacyOverride legacyOverride = LegacyOverride
                .builder()
                .encryptor(oldEncryptor)
                .policy(LegacyPolicy.FORBID_LEGACY_ENCRYPT_ALLOW_LEGACY_DECRYPT)
                .attributeActionsOnEncrypt(legacyActions)
                .build();

        // 3. Create a DynamoDbEncryptionInterceptor with the above configuration.
        final Map<String, DynamoDbEnhancedTableEncryptionConfig> tableConfigs = new HashMap<>();
        tableConfigs.put(ddbTableName,
                DynamoDbEnhancedTableEncryptionConfig.builder()
                        .logicalTableName(ddbTableName)
                        .keyring(kmsKeyring)
                        .allowedUnsignedAttributes(allowedUnsignedAttributes)
                        .schemaOnEncrypt(tableSchema)
                        .legacyOverride(legacyOverride)
                        .build());
        final DynamoDbEncryptionInterceptor interceptor =
                DynamoDbEnhancedClientEncryption.CreateDynamoDbEncryptionInterceptor(
                        CreateDynamoDbEncryptionInterceptorInput.builder()
                                .tableEncryptionConfigs(tableConfigs)
                                .build()
                );

        // 4. Create a new AWS SDK DynamoDb client using the 
        //    interceptor from Step 3.
        final DynamoDbClient ddb = DynamoDbClient.builder()
                .overrideConfiguration(
                        ClientOverrideConfiguration.builder()
                                .addExecutionInterceptor(interceptor)
                                .build())
                .build();

        // 5. Create the DynamoDbEnhancedClient using the AWS SDK DynamoDb Client created
        //    in Step 4, and create a table with your modeled class.
        final DynamoDbEnhancedClient enhancedClient = DynamoDbEnhancedClient.builder()
                .dynamoDbClient(ddb)
                .build();
        final DynamoDbTable<SimpleClass> table = enhancedClient.table(ddbTableName, tableSchema);
    }
}

public class MigrationExampleStep3 {

    public static void MigrationStep3(String kmsKeyId, String ddbTableName, int sortReadValue) {
        // 1. Continue to configure your keyring, table schema,
        //    and allowedUnsignedAttributes as you did in Step 1.
        //    Do not include the configurations for the DynamoDBEncryptor or 
        //    the legacy attribute actions.
        final MaterialProviders matProv = MaterialProviders.builder()
                .MaterialProvidersConfig(MaterialProvidersConfig.builder().build())
                .build();
        final CreateAwsKmsMrkMultiKeyringInput keyringInput = CreateAwsKmsMrkMultiKeyringInput.builder()
                .generator(kmsKeyId)
                .build();
        final IKeyring kmsKeyring = matProv.CreateAwsKmsMrkMultiKeyring(keyringInput);

        final TableSchema<SimpleClass> schemaOnEncrypt = TableSchema.fromBean(SimpleClass.class);

        final List<String> allowedUnsignedAttributes = Arrays.asList("attribute3");


        // 3. Create a DynamoDbEncryptionInterceptor with the above configuration.
        //    Do not configure any legacy behavior.
        final Map<String, DynamoDbEnhancedTableEncryptionConfig> tableConfigs = new HashMap<>();
        tableConfigs.put(ddbTableName,
                DynamoDbEnhancedTableEncryptionConfig.builder()
                        .logicalTableName(ddbTableName)
                        .keyring(kmsKeyring)
                        .allowedUnsignedAttributes(allowedUnsignedAttributes)
                        .schemaOnEncrypt(tableSchema)
                        .build());
        final DynamoDbEncryptionInterceptor interceptor =
                DynamoDbEnhancedClientEncryption.CreateDynamoDbEncryptionInterceptor(
                        CreateDynamoDbEncryptionInterceptorInput.builder()
                                .tableEncryptionConfigs(tableConfigs)
                                .build()
                );

        // 4. Create a new AWS SDK DynamoDb client using the 
        //    interceptor from Step 3.
        final DynamoDbClient ddb = DynamoDbClient.builder()
                .overrideConfiguration(
                        ClientOverrideConfiguration.builder()
                                .addExecutionInterceptor(interceptor)
                                .build())
                .build();

        // 5. Create the DynamoDbEnhancedClient using the AWS SDK Client 
        //    created in Step 4, and create a table with your modeled class.
        final DynamoDbEnhancedClient enhancedClient = DynamoDbEnhancedClient.builder()
                .dynamoDbClient(ddb)
                .build();
        final DynamoDbTable<SimpleClass> table = enhancedClient.table(ddbTableName, tableSchema);
    }
}