쿠키 기본 설정 선택

당사는 사이트와 서비스를 제공하는 데 필요한 필수 쿠키 및 유사한 도구를 사용합니다. 고객이 사이트를 어떻게 사용하는지 파악하고 개선할 수 있도록 성능 쿠키를 사용해 익명의 통계를 수집합니다. 필수 쿠키는 비활성화할 수 없지만 '사용자 지정' 또는 ‘거부’를 클릭하여 성능 쿠키를 거부할 수 있습니다.

사용자가 동의하는 경우 AWS와 승인된 제3자도 쿠키를 사용하여 유용한 사이트 기능을 제공하고, 사용자의 기본 설정을 기억하고, 관련 광고를 비롯한 관련 콘텐츠를 표시합니다. 필수가 아닌 모든 쿠키를 수락하거나 거부하려면 ‘수락’ 또는 ‘거부’를 클릭하세요. 더 자세한 내용을 선택하려면 ‘사용자 정의’를 클릭하세요.

VirtualInterface - AWS Direct Connect
이 페이지는 귀하의 언어로 번역되지 않았습니다. 번역 요청

VirtualInterface

Information about a virtual interface.

Contents

addressFamily

The address family for the BGP peer.

Type: String

Valid Values: ipv4 | ipv6

Required: No

amazonAddress

The IP address assigned to the Amazon interface.

Type: String

Required: No

amazonSideAsn

The autonomous system number (ASN) for the Amazon side of the connection.

Type: Long

Required: No

asn

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

Type: Integer

Required: No

authKey

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

Type: String

Required: No

awsDeviceV2

The Direct Connect endpoint that terminates the physical connection.

Type: String

Required: No

awsLogicalDeviceId

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

Type: String

Required: No

bgpPeers

The BGP peers configured on this virtual interface.

Type: Array of BGPPeer objects

Required: No

connectionId

The ID of the connection.

Type: String

Required: No

customerAddress

The IP address assigned to the customer interface.

Type: String

Required: No

customerRouterConfig

The customer router configuration.

Type: String

Required: No

directConnectGatewayId

The ID of the Direct Connect gateway.

Type: String

Required: No

jumboFrameCapable

Indicates whether jumbo frames are supported.

Type: Boolean

Required: No

location

The location of the connection.

Type: String

Required: No

mtu

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500

Type: Integer

Required: No

ownerAccount

The ID of the AWS account that owns the virtual interface.

Type: String

Required: No

region

The AWS Region where the virtual interface is located.

Type: String

Required: No

routeFilterPrefixes

The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.

Type: Array of RouteFilterPrefix objects

Required: No

siteLinkEnabled

Indicates whether SiteLink is enabled.

Type: Boolean

Required: No

tags

The tags associated with the virtual interface.

Type: Array of Tag objects

Array Members: Minimum number of 1 item.

Required: No

virtualGatewayId

The ID of the virtual private gateway. Applies only to private virtual interfaces.

Type: String

Required: No

virtualInterfaceId

The ID of the virtual interface.

Type: String

Required: No

virtualInterfaceName

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

Type: String

Required: No

virtualInterfaceState

The state of the virtual interface. The following are the possible values:

  • confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.

  • verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.

  • pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.

  • available: A virtual interface that is able to forward traffic.

  • down: A virtual interface that is BGP down.

  • testing: A virtual interface is in this state immediately after calling StartBgpFailoverTest and remains in this state during the duration of the test.

  • deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.

  • deleted: A virtual interface that cannot forward traffic.

  • rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.

  • unknown: The state of the virtual interface is not available.

Type: String

Valid Values: confirming | verifying | pending | available | down | testing | deleting | deleted | rejected | unknown

Required: No

virtualInterfaceType

The type of virtual interface. The possible values are private, public and transit.

Type: String

Required: No

vlan

The ID of the VLAN.

Type: Integer

Required: No

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following:

프라이버시사이트 이용 약관쿠키 기본 설정
© 2025, Amazon Web Services, Inc. 또는 계열사. All rights reserved.