Getting started with AWS Network Firewall
AWS Network Firewall provides network traffic filtering protection for your Amazon Virtual Private Cloud VPCs. This tutorial provides steps for getting started with Network Firewall using the AWS Management Console. You can also use Network Firewall API operations to create and manage your firewalls. For more information about working with Network Firewall API operations, see the AWS Network Firewall API Reference.
Topics
Before you begin
This tutorial walks you through configuring and implementing an AWS Network Firewall firewall for a VPC with a basic internet gateway architecture, like the one depicted at Simple single zone architecture with an internet gateway using AWS Network Firewall.
To follow this tutorial, you'll need a test VPC where you want to implement a network firewall. Additionally, you must know how to manage the subnets and route tables in your VPC.
-
For information about managing subnets in your VPC, see VPCs and subnets in the Amazon Virtual Private Cloud User Guide.
-
For information about managing route tables for your VPC, see Route tables in the Amazon Virtual Private Cloud User Guide.
The test VPC that you use for this tutorial must have the following configuration in one Region:
-
An internet gateway.
-
A customer subnet.
-
Routing configured to send inbound traffic from the internet gateway to the subnet and to send the subnet's outbound traffic to the internet gateway.
-
A second subnet to use as the firewall subnet. This subnet must not be used for other purposes and must have at least one available IP address. You'll select the Availability Zone and subnet ID when you create the firewall.
If you have a different architecture that you'd like to add a firewall to, you can adjust the guidance in this tutorial accordingly. Network Firewall doesn't support some VPC architectures. For information, see AWS Network Firewall example architectures with routing.
Step 1: Create rule groups
Rule groups are reusable collections of network filtering rules that you use to configure firewall behavior. In this step, you create a stateless rule group and a stateful rule group. For information about rule groups, see Rule groups.
To create a stateless rule group
Sign in to the AWS Management Console and open the Amazon VPC console at https://console.aws.amazon.com/vpc/
. -
In the navigation pane, under Network Firewall, choose Network Firewall rule groups.
-
Choose Create rule group.
-
In the Create rule group page, for the Rule group type, choose Stateless rule group.
-
Enter the name that you want for the rule group. You'll use the name to identify the rule group when you add it to your firewall policy later in the tutorial. You can't change the name of a rule group after you create it.
-
For Capacity, enter
10. Enter the following rule specifications to create a stateless rule that blocks all packets coming from the source IP address CIDR range
192.0.2.0/24:-
Set the priority to 10.
-
Leave the protocol setting at All.
-
For the source address, specify
192.0.2.0/24. -
Leave the source port at Any.
-
Set the destination address to Any.
For the action, choose Drop.
-
Choose Add rule. Your rule is added to the Rules list.
-
-
Review the settings for the rule group, then choose Create rule group.
Your new rule group is added to the list in the Rule groups page.
To create a stateful rule group
-
From the Rule groups page, choose Create rule group.
-
In the Create rule group page, for the Rule group type, choose Stateful rule group.
-
Enter a name for the stateful rule group.
-
For Capacity, enter
10. -
Choose the stateful rule group configuration option Import Suricata compatible rules. The entry form for Suricata compatible rule string appears. Copy and paste the following Suricata rule into the text box. This rule drops TLS traffic for a specific target domain:
drop tls $HOME_NET any -> $EXTERNAL_NET any (ssl_state:client_hello; tls.sni; content:"evil.com"; startswith; nocase; endswith; msg:"matching TLS denylisted FQDNs"; priority:1; flow:to_server, established; sid:1; rev:1;) -
Choose Add rule. Your rule is added to the Rules list for the rule group.
-
Review the settings for the rule group, then choose Create rule group.
Your stateless rule group and your stateful rule group are listed in the Rule groups page. You can now use these rule groups in your firewall policies.
Step 2: Create a firewall policy
Firewall policies use rule groups and other settings to define the traffic filtering behavior for a firewall. In this procedure, you'll create a policy using the rule groups that you created in the previous step. For information about firewall policies, see Firewall policies in AWS Network Firewall.
To configure a firewall policy
Sign in to the AWS Management Console and open the Amazon VPC console at https://console.aws.amazon.com/vpc/
. -
In the navigation pane, under Network Firewall, choose Firewall policies.
-
In the Firewall policies page, choose Create firewall policy.
-
Enter the name that you want to use for the firewall policy. You'll use the name to identify the policy when you associate it with your firewall later in the tutorial. You can't change the name of a firewall policy after you create it.
-
Choose Next to go to the firewall policy's Add rule groups page.
-
In the Stateless rule groups section, choose Add rule groups, then select the check box for the stateless rule group that you created in the prior procedure. Choose Add rule groups. At the bottom of the page, the firewall policy's capacity counter shows the capacity consumed by adding this rule group next to the maximum capacity allowed for a firewall policy.
-
Your stateless rule group blocks some incoming traffic. In the stateless default actions, you choose what to do with the rest of the traffic. For this tutorial, we'll forward it to the stateful engine. Use the same default action for packets and packet fragments. Network Firewall only manages UDP packet fragments and silently drops packet fragments for other protocols. Set the action to Forward to stateful rules.
-
In the Stateful rule groups section, choose Add rule groups, then select the check box for the stateful rule group that you created in the prior procedure. Choose Add rule groups.
-
Choose Next then Next again to proceed through the tagging option and to the Review and create page. From this page, you can choose Edit for any area to return to the corresponding page in the firewall policy creation wizard.
-
Choose Create firewall policy.
Your new firewall policy is added to the list in the Firewall policies page. You can now use your firewall policy in your firewalls.
Step 3: Create a firewall
Firewalls associate the traffic filtering behavior of a firewall policy with the VPC where you want to filter traffic. In this procedure, you'll create a firewall using the firewall policy that you created in the previous step. For information about firewalls, see Firewalls in AWS Network Firewall.
To create a firewall
Sign in to the AWS Management Console and open the Amazon VPC console at https://console.aws.amazon.com/vpc/
. -
In the navigation pane, under Network Firewall, choose Firewalls.
-
Choose Create firewall.
-
For Name, enter the name that you want to use to identify this firewall. You can't change the name of a firewall after you create it.
-
For VPC, select your VPC from the dropdown.
-
For Availability Zone and Subnet, select the zone and firewall subnet that you identified in Before you begin.
-
For Associated firewall policy, choose Associate an existing firewall policy, then select the firewall policy that you created in the prior procedure.
-
Choose Create firewall.
Your new firewall is listed in the Firewalls page. You've configured the firewall's behavior with the firewall policy and rule groups, and your firewall has an endpoint that's running in your VPC, ready to filter network traffic.
Note
Network Firewall supports up to 100 Gbps of network traffic per firewall endpoint. If you require more traffic bandwidth, you can split your resources into subnets and create a Network Firewall firewall in each subnet.
The next step is to route the VPC's network traffic through the firewall endpoint. You'll insert it into the traffic flow between the internet gateway and your customer subnet.
Step 4: Update your Amazon VPC route tables
After you create your firewall, you insert its firewall endpoint into your Amazon Virtual Private Cloud network traffic flow, in between your internet gateway and your customer subnet. You create routing for the firewall endpoint so that it forwards traffic between the internet gateway and your subnet. Then, you update the route tables for your internet gateway and your subnet, to send traffic to the firewall endpoint instead of to each other.
This procedure covers the high-level steps for route table management. For information about managing route tables for your VPC, see Route tables in the Amazon Virtual Private Cloud User Guide.
To modify your route tables to insert a firewall endpoint between your internet gateway and your subnet
-
Review your routing for the internet gateway and for your customer subnet, to determine the components used to route traffic between the two.
Record the current settings. You'll use them to reverse your changes at the end of the tutorial.
-
The internet gateway's route table typically has an entry with a destination set to your customer subnet's CIDR block and a target of
local. -
The subnet's route table typically has an entry with a destination set to
0.0.0.0/0and a target set to the internet gateway ID.
-
-
Create a route table configuration for the firewall endpoint with the following two routes:
-
An entry that matches the internet gateway's route specification for traffic going to the customer subnet's CIDR block.
-
An entry that matches the subnet's route specification for traffic going to the internet gateway.
The firewall endpoint is now ready to filter and forward traffic between the internet gateway and the customer subnet. The endpoint only forwards traffic to its intended destination if it passes the inspection criteria that you defined in the rule groups and firewall policy.
-
-
Update the internet gateway's routing to modify the entry with a destination set to your customer subnet's CIDR block. Change the target to the firewall endpoint ID.
-
Update the customer subnet routing to modify the entry with a destination set to the internet gateway ID. Change the target to the firewall endpoint ID.
The firewall endpoint is now filtering all traffic between your internet gateway and customer subnet.
Step 5: Remove the firewall and clean up your resources
You've now successfully completed the tutorial. To remove the firewall endpoint from your VPC and prevent your account from accruing AWS Network Firewall charges for the tutorial resources, revert your route table changes and clean up the Network Firewall resources that you created.
To modify your route tables to remove the firewall
-
Return the internet gateway and subnet route tables to the configurations they had at the start of the prior procedure. This stops traffic from routing to the firewall endpoint.
-
Remove the route table configuration for the firewall endpoint.
To remove the Network Firewall resources
Sign in to the AWS Management Console and open the Amazon VPC console at https://console.aws.amazon.com/vpc/
. -
In the navigation pane, under Network Firewall, choose Firewalls.
-
In the Firewalls page, select the firewall that you created for the tutorial.
-
Choose Delete, and then confirm your request.
-
In the navigation pane, under Network Firewall, choose Firewall policies.
-
In the Firewall policies page, select the firewall policy that you created for the tutorial.
-
Choose Delete, and confirm your request.
-
In the navigation pane, under Network Firewall, choose Network Firewall rule groups.
-
In the Rule group page, select the name of the rule groups that you created for the tutorial, and then choose Delete.
You've successfully removed the firewall from your VPC traffic flow and removed all of the Network Firewall resources that you created for this tutorial.
