modify_route_server¶
Operation¶
async
¶
modify_route_server(input: ModifyRouteServerInput, plugins: list[Plugin] | None = None) -> ModifyRouteServerOutput
Modifies the configuration of an existing route server.
Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.
Route server supports the follow route table types:
-
VPC route tables not associated with subnets
-
Subnet route tables
-
Internet gateway route tables
Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use Transit Gateway Connect.
For more information see Dynamic routing in your VPC with VPC Route Server in the Amazon VPC User Guide.
Parameters:
| Name | Type | Description | Default |
|---|---|---|---|
input
|
ModifyRouteServerInput
|
An instance of |
required |
plugins
|
list[Plugin] | None
|
A list of callables that modify the configuration dynamically. Changes made by these plugins only apply for the duration of the operation execution and will not affect any other operation invocations. |
None
|
Returns:
| Type | Description |
|---|---|
ModifyRouteServerOutput
|
An instance of |
Input¶
dataclass
¶
Bases: _SerdeShape
Dataclass for ModifyRouteServerInput structure.
Attributes¶
class-attribute
instance-attribute
¶
dry_run: bool | None = ...
A check for whether you have the required permissions for the action
without actually making the request and provides an error response. If
you have the required permissions, the error response is
DryRunOperation. Otherwise, it is UnauthorizedOperation.
class-attribute
instance-attribute
¶
persist_routes: str | None = ...
Specifies whether to persist routes after all BGP sessions are terminated.
-
enable: Routes will be persisted in FIB and RIB after all BGP sessions are terminated.
-
disable: Routes will not be persisted in FIB and RIB after all BGP sessions are terminated.
-
reset: If a route server has persisted routes due to all BGP sessions having ended, reset will withdraw all routes and reset route server to an empty FIB and RIB.
class-attribute
instance-attribute
¶
persist_routes_duration: int | None = ...
The number of minutes a route server will wait after BGP is
re-established to unpersist the routes in the FIB and RIB. Value must be
in the range of 1-5. Required if PersistRoutes is enabled.
If you set the duration to 1 minute, then when your network appliance re-establishes BGP with route server, it has 1 minute to relearn it's adjacent network and advertise those routes to route server before route server resumes normal functionality. In most cases, 1 minute is probably sufficient. If, however, you have concerns that your BGP network may not be capable of fully re-establishing and re-learning everything in 1 minute, you can increase the duration up to 5 minutes.
Output¶
dataclass
¶
Bases: _SerdeShape
Dataclass for ModifyRouteServerOutput structure.
Attributes¶
class-attribute
instance-attribute
¶
Metadata about the response that produced this output. Use this to recover the request identifiers a service's support team needs in order to investigate a call. Members of the metadata are individually optional.
class-attribute
instance-attribute
¶
route_server: RouteServer | None = ...
Information about the modified route server.