AssociateKmsKey

$result = $client->associateKmsKey([/* ... */]);
$promise = $client->associateKmsKeyAsync([/* ... */]);

Associates the specified KMS key with either one log group in the account, or with all stored CloudWatch Logs query insights results in the account.

When you use AssociateKmsKey, you specify either the logGroupName parameter or the resourceIdentifier parameter. You can't specify both of those parameters in the same operation.

• Specify the logGroupName parameter to cause all log events stored in the log group to be encrypted with that key. Only the log events ingested after the key is associated are encrypted with that key.

  Associating a KMS key with a log group overrides any existing associations between the log group and a KMS key. After a KMS key is associated with a log group, all newly ingested data for the log group is encrypted using the KMS key. This association is stored as long as the data encrypted with the KMS key is still within CloudWatch Logs. This enables CloudWatch Logs to decrypt this data whenever it is requested.

  Associating a key with a log group does not cause the results of queries of that log group to be encrypted with that key. To have query results encrypted with a KMS key, you must use an AssociateKmsKey operation with the resourceIdentifier parameter that specifies a query-result resource.

• Specify the resourceIdentifier parameter with a query-result resource, to use that key to encrypt the stored results of all future StartQuery operations in the account. The response from a GetQueryResults operation will still return the query results in plain text.

  Even if you have not associated a key with your query results, the query results are encrypted when stored, using the default CloudWatch Logs method.

  If you run a query from a monitoring account that queries logs in a source account, the query results key from the monitoring account, if any, is used.

It can take up to 5 minutes for this operation to take effect.

If you attempt to associate a KMS key with a log group but the KMS key does not exist or the KMS key is disabled, you receive an InvalidParameterException error.

Parameter Syntax

$result = $client->associateKmsKey([
    'kmsKeyId' => '<string>', // REQUIRED
    'logGroupName' => '<string>',
    'resourceIdentifier' => '<string>',
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

CancelExportTask

$result = $client->cancelExportTask([/* ... */]);
$promise = $client->cancelExportTaskAsync([/* ... */]);

Cancels the specified export task.

The task must be in the PENDING or RUNNING state.

Parameter Syntax

$result = $client->cancelExportTask([
    'taskId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

InvalidOperationException:

The operation is not valid on the specified resource.

ServiceUnavailableException:

The service cannot complete the request.

CreateDelivery

$result = $client->createDelivery([/* ... */]);
$promise = $client->createDeliveryAsync([/* ... */]);

Creates a delivery. A delivery is a connection between a logical delivery source and a logical delivery destination that you have already created.

Only some Amazon Web Services services support being configured as a delivery source using this operation. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services.

A delivery destination can represent a log group in CloudWatch Logs, an Amazon S3 bucket, or a delivery stream in Firehose.

To configure logs delivery between a supported Amazon Web Services service and a destination, you must do the following:

• Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource.

• Create a delivery destination, which is a logical object that represents the actual delivery destination. For more information, see PutDeliveryDestination.

• If you are delivering logs cross-account, you must use PutDeliveryDestinationPolicy in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination.

• Use CreateDelivery to create a delivery by pairing exactly one delivery source and one delivery destination.

You can configure a single delivery source to send logs to multiple destinations by creating multiple deliveries. You can also create multiple deliveries to configure multiple delivery sources to send logs to the same delivery destination.

To update an existing delivery configuration, use UpdateDeliveryConfiguration.

Parameter Syntax

$result = $client->createDelivery([
    'deliveryDestinationArn' => '<string>', // REQUIRED
    'deliverySourceName' => '<string>', // REQUIRED
    'fieldDelimiter' => '<string>',
    'recordFields' => ['<string>', ...],
    's3DeliveryConfiguration' => [
        'enableHiveCompatiblePath' => true || false,
        'suffixPath' => '<string>',
    ],
    'tags' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'delivery' => [
        'arn' => '<string>',
        'deliveryDestinationArn' => '<string>',
        'deliveryDestinationType' => 'S3|CWL|FH',
        'deliverySourceName' => '<string>',
        'fieldDelimiter' => '<string>',
        'id' => '<string>',
        'recordFields' => ['<string>', ...],
        's3DeliveryConfiguration' => [
            'enableHiveCompatiblePath' => true || false,
            'suffixPath' => '<string>',
        ],
        'tags' => ['<string>', ...],
    ],
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ConflictException:

This operation attempted to create a resource that already exists.

ResourceNotFoundException:

The specified resource does not exist.

ValidationException:

One of the parameters for the request is not valid.

AccessDeniedException:

You don't have sufficient permissions to perform this action.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

CreateExportTask

$result = $client->createExportTask([/* ... */]);
$promise = $client->createExportTaskAsync([/* ... */]);

Creates an export task so that you can efficiently export data from a log group to an Amazon S3 bucket. When you perform a CreateExportTask operation, you must use credentials that have permission to write to the S3 bucket that you specify as the destination.

Exporting log data to S3 buckets that are encrypted by KMS is supported. Exporting log data to Amazon S3 buckets that have S3 Object Lock enabled with a retention period is also supported.

Exporting to S3 buckets that are encrypted with AES-256 is supported.

This is an asynchronous call. If all the required information is provided, this operation initiates an export task and responds with the ID of the task. After the task has started, you can use DescribeExportTasks to get the status of the export task. Each account can only have one active (RUNNING or PENDING) export task at a time. To cancel an export task, use CancelExportTask.

You can export logs from multiple log groups or multiple time ranges to the same S3 bucket. To separate log data for each export task, specify a prefix to be used as the Amazon S3 key prefix for all exported objects.

Parameter Syntax

$result = $client->createExportTask([
    'destination' => '<string>', // REQUIRED
    'destinationPrefix' => '<string>',
    'from' => <integer>, // REQUIRED
    'logGroupName' => '<string>', // REQUIRED
    'logStreamNamePrefix' => '<string>',
    'taskName' => '<string>',
    'to' => <integer>, // REQUIRED
]);

Parameter Details

Result Syntax

[
    'taskId' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

LimitExceededException:

You have reached the maximum number of resources that can be created.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

ResourceNotFoundException:

The specified resource does not exist.

ResourceAlreadyExistsException:

The specified resource already exists.

CreateLogAnomalyDetector

$result = $client->createLogAnomalyDetector([/* ... */]);
$promise = $client->createLogAnomalyDetectorAsync([/* ... */]);

Creates an anomaly detector that regularly scans one or more log groups and look for patterns and anomalies in the logs.

An anomaly detector can help surface issues by automatically discovering anomalies in your log event traffic. An anomaly detector uses machine learning algorithms to scan log events and find patterns. A pattern is a shared text structure that recurs among your log fields. Patterns provide a useful tool for analyzing large sets of logs because a large number of log events can often be compressed into a few patterns.

The anomaly detector uses pattern recognition to find anomalies, which are unusual log events. It uses the evaluationFrequency to compare current log events and patterns with trained baselines.

Fields within a pattern are called tokens. Fields that vary within a pattern, such as a request ID or timestamp, are referred to as dynamic tokens and represented by <*>.

The following is an example of a pattern:

[INFO] Request time: <*> ms

This pattern represents log events like [INFO] Request time: 327 ms and other similar log events that differ only by the number, in this csse 327. When the pattern is displayed, the different numbers are replaced by <*>

Parameter Syntax

$result = $client->createLogAnomalyDetector([
    'anomalyVisibilityTime' => <integer>,
    'detectorName' => '<string>',
    'evaluationFrequency' => 'ONE_MIN|FIVE_MIN|TEN_MIN|FIFTEEN_MIN|THIRTY_MIN|ONE_HOUR',
    'filterPattern' => '<string>',
    'kmsKeyId' => '<string>',
    'logGroupArnList' => ['<string>', ...], // REQUIRED
    'tags' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'anomalyDetectorArn' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

LimitExceededException:

You have reached the maximum number of resources that can be created.

CreateLogGroup

$result = $client->createLogGroup([/* ... */]);
$promise = $client->createLogGroupAsync([/* ... */]);

Creates a log group with the specified name. You can create up to 1,000,000 log groups per Region per account.

You must use the following guidelines when naming a log group:

• Log group names must be unique within a Region for an Amazon Web Services account.

• Log group names can be between 1 and 512 characters long.

• Log group names consist of the following characters: a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), '.' (period), and '#' (number sign)

• Log group names can't start with the string aws/

When you create a log group, by default the log events in the log group do not expire. To set a retention policy so that events expire and are deleted after a specified time, use PutRetentionPolicy.

If you associate an KMS key with the log group, ingested data is encrypted using the KMS key. This association is stored as long as the data encrypted with the KMS key is still within CloudWatch Logs. This enables CloudWatch Logs to decrypt this data whenever it is requested.

If you attempt to associate a KMS key with the log group but the KMS key does not exist or the KMS key is disabled, you receive an InvalidParameterException error.

Parameter Syntax

$result = $client->createLogGroup([
    'kmsKeyId' => '<string>',
    'logGroupClass' => 'STANDARD|INFREQUENT_ACCESS',
    'logGroupName' => '<string>', // REQUIRED
    'tags' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceAlreadyExistsException:

The specified resource already exists.

LimitExceededException:

You have reached the maximum number of resources that can be created.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

CreateLogStream

$result = $client->createLogStream([/* ... */]);
$promise = $client->createLogStreamAsync([/* ... */]);

Creates a log stream for the specified log group. A log stream is a sequence of log events that originate from a single source, such as an application instance or a resource that is being monitored.

There is no limit on the number of log streams that you can create for a log group. There is a limit of 50 TPS on CreateLogStream operations, after which transactions are throttled.

You must use the following guidelines when naming a log stream:

• Log stream names must be unique within the log group.

• Log stream names can be between 1 and 512 characters long.

• Don't use ':' (colon) or '*' (asterisk) characters.

Parameter Syntax

$result = $client->createLogStream([
    'logGroupName' => '<string>', // REQUIRED
    'logStreamName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceAlreadyExistsException:

The specified resource already exists.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DeleteAccountPolicy

$result = $client->deleteAccountPolicy([/* ... */]);
$promise = $client->deleteAccountPolicyAsync([/* ... */]);

Deletes a CloudWatch Logs account policy. This stops the policy from applying to all log groups or a subset of log groups in the account. Log-group level policies will still be in effect.

To use this operation, you must be signed on with the correct permissions depending on the type of policy that you are deleting.

• To delete a data protection policy, you must have the logs:DeleteDataProtectionPolicy and logs:DeleteAccountPolicy permissions.

• To delete a subscription filter policy, you must have the logs:DeleteSubscriptionFilter and logs:DeleteAccountPolicy permissions.

Parameter Syntax

$result = $client->deleteAccountPolicy([
    'policyName' => '<string>', // REQUIRED
    'policyType' => 'DATA_PROTECTION_POLICY|SUBSCRIPTION_FILTER_POLICY', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

DeleteDataProtectionPolicy

$result = $client->deleteDataProtectionPolicy([/* ... */]);
$promise = $client->deleteDataProtectionPolicyAsync([/* ... */]);

Deletes the data protection policy from the specified log group.

For more information about data protection policies, see PutDataProtectionPolicy.

Parameter Syntax

$result = $client->deleteDataProtectionPolicy([
    'logGroupIdentifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DeleteDelivery

$result = $client->deleteDelivery([/* ... */]);
$promise = $client->deleteDeliveryAsync([/* ... */]);

Deletes s delivery. A delivery is a connection between a logical delivery source and a logical delivery destination. Deleting a delivery only deletes the connection between the delivery source and delivery destination. It does not delete the delivery destination or the delivery source.

Parameter Syntax

$result = $client->deleteDelivery([
    'id' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ConflictException:

This operation attempted to create a resource that already exists.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

DeleteDeliveryDestination

$result = $client->deleteDeliveryDestination([/* ... */]);
$promise = $client->deleteDeliveryDestinationAsync([/* ... */]);

Deletes a delivery destination. A delivery is a connection between a logical delivery source and a logical delivery destination.

You can't delete a delivery destination if any current deliveries are associated with it. To find whether any deliveries are associated with this delivery destination, use the DescribeDeliveries operation and check the deliveryDestinationArn field in the results.

Parameter Syntax

$result = $client->deleteDeliveryDestination([
    'name' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ConflictException:

This operation attempted to create a resource that already exists.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

DeleteDeliveryDestinationPolicy

$result = $client->deleteDeliveryDestinationPolicy([/* ... */]);
$promise = $client->deleteDeliveryDestinationPolicyAsync([/* ... */]);

Deletes a delivery destination policy. For more information about these policies, see PutDeliveryDestinationPolicy.

Parameter Syntax

$result = $client->deleteDeliveryDestinationPolicy([
    'deliveryDestinationName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ValidationException:

One of the parameters for the request is not valid.

ResourceNotFoundException:

The specified resource does not exist.

ConflictException:

This operation attempted to create a resource that already exists.

DeleteDeliverySource

$result = $client->deleteDeliverySource([/* ... */]);
$promise = $client->deleteDeliverySourceAsync([/* ... */]);

Deletes a delivery source. A delivery is a connection between a logical delivery source and a logical delivery destination.

You can't delete a delivery source if any current deliveries are associated with it. To find whether any deliveries are associated with this delivery source, use the DescribeDeliveries operation and check the deliverySourceName field in the results.

Parameter Syntax

$result = $client->deleteDeliverySource([
    'name' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ConflictException:

This operation attempted to create a resource that already exists.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

DeleteDestination

$result = $client->deleteDestination([/* ... */]);
$promise = $client->deleteDestinationAsync([/* ... */]);

Deletes the specified destination, and eventually disables all the subscription filters that publish to it. This operation does not delete the physical resource encapsulated by the destination.

Parameter Syntax

$result = $client->deleteDestination([
    'destinationName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

DeleteLogAnomalyDetector

$result = $client->deleteLogAnomalyDetector([/* ... */]);
$promise = $client->deleteLogAnomalyDetectorAsync([/* ... */]);

Deletes the specified CloudWatch Logs anomaly detector.

Parameter Syntax

$result = $client->deleteLogAnomalyDetector([
    'anomalyDetectorArn' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

DeleteLogGroup

$result = $client->deleteLogGroup([/* ... */]);
$promise = $client->deleteLogGroupAsync([/* ... */]);

Deletes the specified log group and permanently deletes all the archived log events associated with the log group.

Parameter Syntax

$result = $client->deleteLogGroup([
    'logGroupName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

DeleteLogStream

$result = $client->deleteLogStream([/* ... */]);
$promise = $client->deleteLogStreamAsync([/* ... */]);

Deletes the specified log stream and permanently deletes all the archived log events associated with the log stream.

Parameter Syntax

$result = $client->deleteLogStream([
    'logGroupName' => '<string>', // REQUIRED
    'logStreamName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

DeleteMetricFilter

$result = $client->deleteMetricFilter([/* ... */]);
$promise = $client->deleteMetricFilterAsync([/* ... */]);

Deletes the specified metric filter.

Parameter Syntax

$result = $client->deleteMetricFilter([
    'filterName' => '<string>', // REQUIRED
    'logGroupName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

DeleteQueryDefinition

$result = $client->deleteQueryDefinition([/* ... */]);
$promise = $client->deleteQueryDefinitionAsync([/* ... */]);

Deletes a saved CloudWatch Logs Insights query definition. A query definition contains details about a saved CloudWatch Logs Insights query.

Each DeleteQueryDefinition operation can delete one query definition.

You must have the logs:DeleteQueryDefinition permission to be able to perform this operation.

Parameter Syntax

$result = $client->deleteQueryDefinition([
    'queryDefinitionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'success' => true || false,
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DeleteResourcePolicy

$result = $client->deleteResourcePolicy([/* ... */]);
$promise = $client->deleteResourcePolicyAsync([/* ... */]);

Deletes a resource policy from this account. This revokes the access of the identities in that policy to put log events to this account.

Parameter Syntax

$result = $client->deleteResourcePolicy([
    'policyName' => '<string>',
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DeleteRetentionPolicy

$result = $client->deleteRetentionPolicy([/* ... */]);
$promise = $client->deleteRetentionPolicyAsync([/* ... */]);

Deletes the specified retention policy.

Log events do not expire if they belong to log groups without a retention policy.

Parameter Syntax

$result = $client->deleteRetentionPolicy([
    'logGroupName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

DeleteSubscriptionFilter

$result = $client->deleteSubscriptionFilter([/* ... */]);
$promise = $client->deleteSubscriptionFilterAsync([/* ... */]);

Deletes the specified subscription filter.

Parameter Syntax

$result = $client->deleteSubscriptionFilter([
    'filterName' => '<string>', // REQUIRED
    'logGroupName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

DescribeAccountPolicies

$result = $client->describeAccountPolicies([/* ... */]);
$promise = $client->describeAccountPoliciesAsync([/* ... */]);

Returns a list of all CloudWatch Logs account policies in the account.

Parameter Syntax

$result = $client->describeAccountPolicies([
    'accountIdentifiers' => ['<string>', ...],
    'policyName' => '<string>',
    'policyType' => 'DATA_PROTECTION_POLICY|SUBSCRIPTION_FILTER_POLICY', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'accountPolicies' => [
        [
            'accountId' => '<string>',
            'lastUpdatedTime' => <integer>,
            'policyDocument' => '<string>',
            'policyName' => '<string>',
            'policyType' => 'DATA_PROTECTION_POLICY|SUBSCRIPTION_FILTER_POLICY',
            'scope' => 'ALL',
            'selectionCriteria' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DescribeConfigurationTemplates

$result = $client->describeConfigurationTemplates([/* ... */]);
$promise = $client->describeConfigurationTemplatesAsync([/* ... */]);

Use this operation to return the valid and default values that are used when creating delivery sources, delivery destinations, and deliveries. For more information about deliveries, see CreateDelivery.

Parameter Syntax

$result = $client->describeConfigurationTemplates([
    'deliveryDestinationTypes' => ['<string>', ...],
    'limit' => <integer>,
    'logTypes' => ['<string>', ...],
    'nextToken' => '<string>',
    'resourceTypes' => ['<string>', ...],
    'service' => '<string>',
]);

Parameter Details

Result Syntax

[
    'configurationTemplates' => [
        [
            'allowedActionForAllowVendedLogsDeliveryForResource' => '<string>',
            'allowedFieldDelimiters' => ['<string>', ...],
            'allowedFields' => [
                [
                    'mandatory' => true || false,
                    'name' => '<string>',
                ],
                // ...
            ],
            'allowedOutputFormats' => ['<string>', ...],
            'allowedSuffixPathFields' => ['<string>', ...],
            'defaultDeliveryConfigValues' => [
                'fieldDelimiter' => '<string>',
                'recordFields' => ['<string>', ...],
                's3DeliveryConfiguration' => [
                    'enableHiveCompatiblePath' => true || false,
                    'suffixPath' => '<string>',
                ],
            ],
            'deliveryDestinationType' => 'S3|CWL|FH',
            'logType' => '<string>',
            'resourceType' => '<string>',
            'service' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ValidationException:

One of the parameters for the request is not valid.

ResourceNotFoundException:

The specified resource does not exist.

ThrottlingException:

The request was throttled because of quota limits.

DescribeDeliveries

$result = $client->describeDeliveries([/* ... */]);
$promise = $client->describeDeliveriesAsync([/* ... */]);

Retrieves a list of the deliveries that have been created in the account.

A delivery is a connection between a delivery source and a delivery destination .

A delivery source represents an Amazon Web Services resource that sends logs to an logs delivery destination. The destination can be CloudWatch Logs, Amazon S3, or Firehose. Only some Amazon Web Services services support being configured as a delivery source. These services are listed in Enable logging from Amazon Web Services services.

Parameter Syntax

$result = $client->describeDeliveries([
    'limit' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'deliveries' => [
        [
            'arn' => '<string>',
            'deliveryDestinationArn' => '<string>',
            'deliveryDestinationType' => 'S3|CWL|FH',
            'deliverySourceName' => '<string>',
            'fieldDelimiter' => '<string>',
            'id' => '<string>',
            'recordFields' => ['<string>', ...],
            's3DeliveryConfiguration' => [
                'enableHiveCompatiblePath' => true || false,
                'suffixPath' => '<string>',
            ],
            'tags' => ['<string>', ...],
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ServiceQuotaExceededException:

This request exceeds a service quota.

ValidationException:

One of the parameters for the request is not valid.

ThrottlingException:

The request was throttled because of quota limits.

DescribeDeliveryDestinations

$result = $client->describeDeliveryDestinations([/* ... */]);
$promise = $client->describeDeliveryDestinationsAsync([/* ... */]);

Retrieves a list of the delivery destinations that have been created in the account.

Parameter Syntax

$result = $client->describeDeliveryDestinations([
    'limit' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'deliveryDestinations' => [
        [
            'arn' => '<string>',
            'deliveryDestinationConfiguration' => [
                'destinationResourceArn' => '<string>',
            ],
            'deliveryDestinationType' => 'S3|CWL|FH',
            'name' => '<string>',
            'outputFormat' => 'json|plain|w3c|raw|parquet',
            'tags' => ['<string>', ...],
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ServiceQuotaExceededException:

This request exceeds a service quota.

ValidationException:

One of the parameters for the request is not valid.

ThrottlingException:

The request was throttled because of quota limits.

DescribeDeliverySources

$result = $client->describeDeliverySources([/* ... */]);
$promise = $client->describeDeliverySourcesAsync([/* ... */]);

Retrieves a list of the delivery sources that have been created in the account.

Parameter Syntax

$result = $client->describeDeliverySources([
    'limit' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'deliverySources' => [
        [
            'arn' => '<string>',
            'logType' => '<string>',
            'name' => '<string>',
            'resourceArns' => ['<string>', ...],
            'service' => '<string>',
            'tags' => ['<string>', ...],
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ServiceQuotaExceededException:

This request exceeds a service quota.

ValidationException:

One of the parameters for the request is not valid.

ThrottlingException:

The request was throttled because of quota limits.

DescribeDestinations

$result = $client->describeDestinations([/* ... */]);
$promise = $client->describeDestinationsAsync([/* ... */]);

Lists all your destinations. The results are ASCII-sorted by destination name.

Parameter Syntax

$result = $client->describeDestinations([
    'DestinationNamePrefix' => '<string>',
    'limit' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'destinations' => [
        [
            'accessPolicy' => '<string>',
            'arn' => '<string>',
            'creationTime' => <integer>,
            'destinationName' => '<string>',
            'roleArn' => '<string>',
            'targetArn' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ServiceUnavailableException:

The service cannot complete the request.

DescribeExportTasks

$result = $client->describeExportTasks([/* ... */]);
$promise = $client->describeExportTasksAsync([/* ... */]);

Lists the specified export tasks. You can list all your export tasks or filter the results based on task ID or task status.

Parameter Syntax

$result = $client->describeExportTasks([
    'limit' => <integer>,
    'nextToken' => '<string>',
    'statusCode' => 'CANCELLED|COMPLETED|FAILED|PENDING|PENDING_CANCEL|RUNNING',
    'taskId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'exportTasks' => [
        [
            'destination' => '<string>',
            'destinationPrefix' => '<string>',
            'executionInfo' => [
                'completionTime' => <integer>,
                'creationTime' => <integer>,
            ],
            'from' => <integer>,
            'logGroupName' => '<string>',
            'status' => [
                'code' => 'CANCELLED|COMPLETED|FAILED|PENDING|PENDING_CANCEL|RUNNING',
                'message' => '<string>',
            ],
            'taskId' => '<string>',
            'taskName' => '<string>',
            'to' => <integer>,
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ServiceUnavailableException:

The service cannot complete the request.

DescribeLogGroups

$result = $client->describeLogGroups([/* ... */]);
$promise = $client->describeLogGroupsAsync([/* ... */]);

Lists the specified log groups. You can list all your log groups or filter the results by prefix. The results are ASCII-sorted by log group name.

CloudWatch Logs doesn't support IAM policies that control access to the DescribeLogGroups action by using the aws:ResourceTag/key-name condition key. Other CloudWatch Logs actions do support the use of the aws:ResourceTag/key-name condition key to control access. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags.

If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Parameter Syntax

$result = $client->describeLogGroups([
    'accountIdentifiers' => ['<string>', ...],
    'includeLinkedAccounts' => true || false,
    'limit' => <integer>,
    'logGroupClass' => 'STANDARD|INFREQUENT_ACCESS',
    'logGroupNamePattern' => '<string>',
    'logGroupNamePrefix' => '<string>',
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'logGroups' => [
        [
            'arn' => '<string>',
            'creationTime' => <integer>,
            'dataProtectionStatus' => 'ACTIVATED|DELETED|ARCHIVED|DISABLED',
            'inheritedProperties' => ['<string>', ...],
            'kmsKeyId' => '<string>',
            'logGroupArn' => '<string>',
            'logGroupClass' => 'STANDARD|INFREQUENT_ACCESS',
            'logGroupName' => '<string>',
            'metricFilterCount' => <integer>,
            'retentionInDays' => <integer>,
            'storedBytes' => <integer>,
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ServiceUnavailableException:

The service cannot complete the request.

DescribeLogStreams

$result = $client->describeLogStreams([/* ... */]);
$promise = $client->describeLogStreamsAsync([/* ... */]);

Lists the log streams for the specified log group. You can list all the log streams or filter the results by prefix. You can also control how the results are ordered.

You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must include one of these two parameters, but you can't include both.

This operation has a limit of five transactions per second, after which transactions are throttled.

If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Parameter Syntax

$result = $client->describeLogStreams([
    'descending' => true || false,
    'limit' => <integer>,
    'logGroupIdentifier' => '<string>',
    'logGroupName' => '<string>',
    'logStreamNamePrefix' => '<string>',
    'nextToken' => '<string>',
    'orderBy' => 'LogStreamName|LastEventTime',
]);

Parameter Details

Result Syntax

[
    'logStreams' => [
        [
            'arn' => '<string>',
            'creationTime' => <integer>,
            'firstEventTimestamp' => <integer>,
            'lastEventTimestamp' => <integer>,
            'lastIngestionTime' => <integer>,
            'logStreamName' => '<string>',
            'storedBytes' => <integer>,
            'uploadSequenceToken' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DescribeMetricFilters

$result = $client->describeMetricFilters([/* ... */]);
$promise = $client->describeMetricFiltersAsync([/* ... */]);

Lists the specified metric filters. You can list all of the metric filters or filter the results by log name, prefix, metric name, or metric namespace. The results are ASCII-sorted by filter name.

Parameter Syntax

$result = $client->describeMetricFilters([
    'filterNamePrefix' => '<string>',
    'limit' => <integer>,
    'logGroupName' => '<string>',
    'metricName' => '<string>',
    'metricNamespace' => '<string>',
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'metricFilters' => [
        [
            'creationTime' => <integer>,
            'filterName' => '<string>',
            'filterPattern' => '<string>',
            'logGroupName' => '<string>',
            'metricTransformations' => [
                [
                    'defaultValue' => <float>,
                    'dimensions' => ['<string>', ...],
                    'metricName' => '<string>',
                    'metricNamespace' => '<string>',
                    'metricValue' => '<string>',
                    'unit' => 'Seconds|Microseconds|Milliseconds|Bytes|Kilobytes|Megabytes|Gigabytes|Terabytes|Bits|Kilobits|Megabits|Gigabits|Terabits|Percent|Count|Bytes/Second|Kilobytes/Second|Megabytes/Second|Gigabytes/Second|Terabytes/Second|Bits/Second|Kilobits/Second|Megabits/Second|Gigabits/Second|Terabits/Second|Count/Second|None',
                ],
                // ...
            ],
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DescribeQueries

$result = $client->describeQueries([/* ... */]);
$promise = $client->describeQueriesAsync([/* ... */]);

Returns a list of CloudWatch Logs Insights queries that are scheduled, running, or have been run recently in this account. You can request all queries or limit it to queries of a specific log group or queries with a certain status.

Parameter Syntax

$result = $client->describeQueries([
    'logGroupName' => '<string>',
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'status' => 'Scheduled|Running|Complete|Failed|Cancelled|Timeout|Unknown',
]);

Parameter Details

Result Syntax

[
    'nextToken' => '<string>',
    'queries' => [
        [
            'createTime' => <integer>,
            'logGroupName' => '<string>',
            'queryId' => '<string>',
            'queryString' => '<string>',
            'status' => 'Scheduled|Running|Complete|Failed|Cancelled|Timeout|Unknown',
        ],
        // ...
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DescribeQueryDefinitions

$result = $client->describeQueryDefinitions([/* ... */]);
$promise = $client->describeQueryDefinitionsAsync([/* ... */]);

This operation returns a paginated list of your saved CloudWatch Logs Insights query definitions. You can retrieve query definitions from the current account or from a source account that is linked to the current account.

You can use the queryDefinitionNamePrefix parameter to limit the results to only the query definitions that have names that start with a certain string.

Parameter Syntax

$result = $client->describeQueryDefinitions([
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'queryDefinitionNamePrefix' => '<string>',
]);

Parameter Details

Result Syntax

[
    'nextToken' => '<string>',
    'queryDefinitions' => [
        [
            'lastModified' => <integer>,
            'logGroupNames' => ['<string>', ...],
            'name' => '<string>',
            'queryDefinitionId' => '<string>',
            'queryString' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ServiceUnavailableException:

The service cannot complete the request.

DescribeResourcePolicies

$result = $client->describeResourcePolicies([/* ... */]);
$promise = $client->describeResourcePoliciesAsync([/* ... */]);

Lists the resource policies in this account.

Parameter Syntax

$result = $client->describeResourcePolicies([
    'limit' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'nextToken' => '<string>',
    'resourcePolicies' => [
        [
            'lastUpdatedTime' => <integer>,
            'policyDocument' => '<string>',
            'policyName' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ServiceUnavailableException:

The service cannot complete the request.

DescribeSubscriptionFilters

$result = $client->describeSubscriptionFilters([/* ... */]);
$promise = $client->describeSubscriptionFiltersAsync([/* ... */]);

Lists the subscription filters for the specified log group. You can list all the subscription filters or filter the results by prefix. The results are ASCII-sorted by filter name.

Parameter Syntax

$result = $client->describeSubscriptionFilters([
    'filterNamePrefix' => '<string>',
    'limit' => <integer>,
    'logGroupName' => '<string>', // REQUIRED
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'nextToken' => '<string>',
    'subscriptionFilters' => [
        [
            'creationTime' => <integer>,
            'destinationArn' => '<string>',
            'distribution' => 'Random|ByLogStream',
            'filterName' => '<string>',
            'filterPattern' => '<string>',
            'logGroupName' => '<string>',
            'roleArn' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

DisassociateKmsKey

$result = $client->disassociateKmsKey([/* ... */]);
$promise = $client->disassociateKmsKeyAsync([/* ... */]);

Disassociates the specified KMS key from the specified log group or from all CloudWatch Logs Insights query results in the account.

When you use DisassociateKmsKey, you specify either the logGroupName parameter or the resourceIdentifier parameter. You can't specify both of those parameters in the same operation.

• Specify the logGroupName parameter to stop using the KMS key to encrypt future log events ingested and stored in the log group. Instead, they will be encrypted with the default CloudWatch Logs method. The log events that were ingested while the key was associated with the log group are still encrypted with that key. Therefore, CloudWatch Logs will need permissions for the key whenever that data is accessed.

• Specify the resourceIdentifier parameter with the query-result resource to stop using the KMS key to encrypt the results of all future StartQuery operations in the account. They will instead be encrypted with the default CloudWatch Logs method. The results from queries that ran while the key was associated with the account are still encrypted with that key. Therefore, CloudWatch Logs will need permissions for the key whenever that data is accessed.

It can take up to 5 minutes for this operation to take effect.

Parameter Syntax

$result = $client->disassociateKmsKey([
    'logGroupName' => '<string>',
    'resourceIdentifier' => '<string>',
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

FilterLogEvents

$result = $client->filterLogEvents([/* ... */]);
$promise = $client->filterLogEventsAsync([/* ... */]);

Lists log events from the specified log group. You can list all the log events or filter the results using a filter pattern, a time range, and the name of the log stream.

You must have the logs:FilterLogEvents permission to perform this operation.

You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must include one of these two parameters, but you can't include both.

By default, this operation returns as many log events as can fit in 1 MB (up to 10,000 log events) or all the events found within the specified time range. If the results include a token, that means there are more log events available. You can get additional results by specifying the token in a subsequent call. This operation can return empty results while there are more log events available through the token.

The returned log events are sorted by event timestamp, the timestamp when the event was ingested by CloudWatch Logs, and the ID of the PutLogEvents request.

If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Parameter Syntax

$result = $client->filterLogEvents([
    'endTime' => <integer>,
    'filterPattern' => '<string>',
    'interleaved' => true || false,
    'limit' => <integer>,
    'logGroupIdentifier' => '<string>',
    'logGroupName' => '<string>',
    'logStreamNamePrefix' => '<string>',
    'logStreamNames' => ['<string>', ...],
    'nextToken' => '<string>',
    'startTime' => <integer>,
    'unmask' => true || false,
]);

Parameter Details

Result Syntax

[
    'events' => [
        [
            'eventId' => '<string>',
            'ingestionTime' => <integer>,
            'logStreamName' => '<string>',
            'message' => '<string>',
            'timestamp' => <integer>,
        ],
        // ...
    ],
    'nextToken' => '<string>',
    'searchedLogStreams' => [
        [
            'logStreamName' => '<string>',
            'searchedCompletely' => true || false,
        ],
        // ...
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

GetDataProtectionPolicy

$result = $client->getDataProtectionPolicy([/* ... */]);
$promise = $client->getDataProtectionPolicyAsync([/* ... */]);

Returns information about a log group data protection policy.

Parameter Syntax

$result = $client->getDataProtectionPolicy([
    'logGroupIdentifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'lastUpdatedTime' => <integer>,
    'logGroupIdentifier' => '<string>',
    'policyDocument' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

GetDelivery

$result = $client->getDelivery([/* ... */]);
$promise = $client->getDeliveryAsync([/* ... */]);

Returns complete information about one logical delivery. A delivery is a connection between a delivery source and a delivery destination .

A delivery source represents an Amazon Web Services resource that sends logs to an logs delivery destination. The destination can be CloudWatch Logs, Amazon S3, or Firehose. Only some Amazon Web Services services support being configured as a delivery source. These services are listed in Enable logging from Amazon Web Services services.

You need to specify the delivery id in this operation. You can find the IDs of the deliveries in your account with the DescribeDeliveries operation.

Parameter Syntax

$result = $client->getDelivery([
    'id' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'delivery' => [
        'arn' => '<string>',
        'deliveryDestinationArn' => '<string>',
        'deliveryDestinationType' => 'S3|CWL|FH',
        'deliverySourceName' => '<string>',
        'fieldDelimiter' => '<string>',
        'id' => '<string>',
        'recordFields' => ['<string>', ...],
        's3DeliveryConfiguration' => [
            'enableHiveCompatiblePath' => true || false,
            'suffixPath' => '<string>',
        ],
        'tags' => ['<string>', ...],
    ],
]

Result Details

Errors

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

GetDeliveryDestination

$result = $client->getDeliveryDestination([/* ... */]);
$promise = $client->getDeliveryDestinationAsync([/* ... */]);

Retrieves complete information about one delivery destination.

Parameter Syntax

$result = $client->getDeliveryDestination([
    'name' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'deliveryDestination' => [
        'arn' => '<string>',
        'deliveryDestinationConfiguration' => [
            'destinationResourceArn' => '<string>',
        ],
        'deliveryDestinationType' => 'S3|CWL|FH',
        'name' => '<string>',
        'outputFormat' => 'json|plain|w3c|raw|parquet',
        'tags' => ['<string>', ...],
    ],
]

Result Details

Errors

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

GetDeliveryDestinationPolicy

$result = $client->getDeliveryDestinationPolicy([/* ... */]);
$promise = $client->getDeliveryDestinationPolicyAsync([/* ... */]);

Retrieves the delivery destination policy assigned to the delivery destination that you specify. For more information about delivery destinations and their policies, see PutDeliveryDestinationPolicy.

Parameter Syntax

$result = $client->getDeliveryDestinationPolicy([
    'deliveryDestinationName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'policy' => [
        'deliveryDestinationPolicy' => '<string>',
    ],
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ValidationException:

One of the parameters for the request is not valid.

ResourceNotFoundException:

The specified resource does not exist.

GetDeliverySource

$result = $client->getDeliverySource([/* ... */]);
$promise = $client->getDeliverySourceAsync([/* ... */]);

Retrieves complete information about one delivery source.

Parameter Syntax

$result = $client->getDeliverySource([
    'name' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'deliverySource' => [
        'arn' => '<string>',
        'logType' => '<string>',
        'name' => '<string>',
        'resourceArns' => ['<string>', ...],
        'service' => '<string>',
        'tags' => ['<string>', ...],
    ],
]

Result Details

Errors

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

GetLogAnomalyDetector

$result = $client->getLogAnomalyDetector([/* ... */]);
$promise = $client->getLogAnomalyDetectorAsync([/* ... */]);

Retrieves information about the log anomaly detector that you specify.

Parameter Syntax

$result = $client->getLogAnomalyDetector([
    'anomalyDetectorArn' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'anomalyDetectorStatus' => 'INITIALIZING|TRAINING|ANALYZING|FAILED|DELETED|PAUSED',
    'anomalyVisibilityTime' => <integer>,
    'creationTimeStamp' => <integer>,
    'detectorName' => '<string>',
    'evaluationFrequency' => 'ONE_MIN|FIVE_MIN|TEN_MIN|FIFTEEN_MIN|THIRTY_MIN|ONE_HOUR',
    'filterPattern' => '<string>',
    'kmsKeyId' => '<string>',
    'lastModifiedTimeStamp' => <integer>,
    'logGroupArnList' => ['<string>', ...],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

GetLogEvents

$result = $client->getLogEvents([/* ... */]);
$promise = $client->getLogEventsAsync([/* ... */]);

Lists log events from the specified log stream. You can list all of the log events or filter using a time range.

By default, this operation returns as many log events as can fit in a response size of 1MB (up to 10,000 log events). You can get additional log events by specifying one of the tokens in a subsequent call. This operation can return empty results while there are more log events available through the token.

If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must include one of these two parameters, but you can't include both.

Parameter Syntax

$result = $client->getLogEvents([
    'endTime' => <integer>,
    'limit' => <integer>,
    'logGroupIdentifier' => '<string>',
    'logGroupName' => '<string>',
    'logStreamName' => '<string>', // REQUIRED
    'nextToken' => '<string>',
    'startFromHead' => true || false,
    'startTime' => <integer>,
    'unmask' => true || false,
]);

Parameter Details

Result Syntax

[
    'events' => [
        [
            'ingestionTime' => <integer>,
            'message' => '<string>',
            'timestamp' => <integer>,
        ],
        // ...
    ],
    'nextBackwardToken' => '<string>',
    'nextForwardToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

GetLogGroupFields

$result = $client->getLogGroupFields([/* ... */]);
$promise = $client->getLogGroupFieldsAsync([/* ... */]);

Returns a list of the fields that are included in log events in the specified log group. Includes the percentage of log events that contain each field. The search is limited to a time period that you specify.

You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must specify one of these parameters, but you can't specify both.

In the results, fields that start with @ are fields generated by CloudWatch Logs. For example, @timestamp is the timestamp of each log event. For more information about the fields that are generated by CloudWatch logs, see Supported Logs and Discovered Fields.

The response results are sorted by the frequency percentage, starting with the highest percentage.

If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Parameter Syntax

$result = $client->getLogGroupFields([
    'logGroupIdentifier' => '<string>',
    'logGroupName' => '<string>',
    'time' => <integer>,
]);

Parameter Details

Result Syntax

[
    'logGroupFields' => [
        [
            'name' => '<string>',
            'percent' => <integer>,
        ],
        // ...
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

LimitExceededException:

You have reached the maximum number of resources that can be created.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

GetLogRecord

$result = $client->getLogRecord([/* ... */]);
$promise = $client->getLogRecordAsync([/* ... */]);

Retrieves all of the fields and values of a single log event. All fields are retrieved, even if the original query that produced the logRecordPointer retrieved only a subset of fields. Fields are returned as field name/field value pairs.

The full unparsed log event is returned within @message.

Parameter Syntax

$result = $client->getLogRecord([
    'logRecordPointer' => '<string>', // REQUIRED
    'unmask' => true || false,
]);

Parameter Details

Result Syntax

[
    'logRecord' => ['<string>', ...],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

LimitExceededException:

You have reached the maximum number of resources that can be created.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

GetQueryResults

$result = $client->getQueryResults([/* ... */]);
$promise = $client->getQueryResultsAsync([/* ... */]);

Returns the results from the specified query.

Only the fields requested in the query are returned, along with a @ptr field, which is the identifier for the log record. You can use the value of @ptr in a GetLogRecord operation to get the full log record.

GetQueryResults does not start running a query. To run a query, use StartQuery. For more information about how long results of previous queries are available, see CloudWatch Logs quotas.

If the value of the Status field in the output is Running, this operation returns only partial results. If you see a value of Scheduled or Running for the status, you can retry the operation later to see the final results.

If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account to start queries in linked source accounts. For more information, see CloudWatch cross-account observability.

Parameter Syntax

$result = $client->getQueryResults([
    'queryId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'encryptionKey' => '<string>',
    'results' => [
        [
            [
                'field' => '<string>',
                'value' => '<string>',
            ],
            // ...
        ],
        // ...
    ],
    'statistics' => [
        'bytesScanned' => <float>,
        'recordsMatched' => <float>,
        'recordsScanned' => <float>,
    ],
    'status' => 'Scheduled|Running|Complete|Failed|Cancelled|Timeout|Unknown',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ListAnomalies

$result = $client->listAnomalies([/* ... */]);
$promise = $client->listAnomaliesAsync([/* ... */]);

Returns a list of anomalies that log anomaly detectors have found. For details about the structure format of each anomaly object that is returned, see the example in this section.

Parameter Syntax

$result = $client->listAnomalies([
    'anomalyDetectorArn' => '<string>',
    'limit' => <integer>,
    'nextToken' => '<string>',
    'suppressionState' => 'SUPPRESSED|UNSUPPRESSED',
]);

Parameter Details

Result Syntax

[
    'anomalies' => [
        [
            'active' => true || false,
            'anomalyDetectorArn' => '<string>',
            'anomalyId' => '<string>',
            'description' => '<string>',
            'firstSeen' => <integer>,
            'histogram' => [<integer>, ...],
            'isPatternLevelSuppression' => true || false,
            'lastSeen' => <integer>,
            'logGroupArnList' => ['<string>', ...],
            'logSamples' => [
                [
                    'message' => '<string>',
                    'timestamp' => <integer>,
                ],
                // ...
            ],
            'patternId' => '<string>',
            'patternRegex' => '<string>',
            'patternString' => '<string>',
            'patternTokens' => [
                [
                    'dynamicTokenPosition' => <integer>,
                    'enumerations' => [<integer>, ...],
                    'inferredTokenName' => '<string>',
                    'isDynamic' => true || false,
                    'tokenString' => '<string>',
                ],
                // ...
            ],
            'priority' => '<string>',
            'state' => 'Active|Suppressed|Baseline',
            'suppressed' => true || false,
            'suppressedDate' => <integer>,
            'suppressedUntil' => <integer>,
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ListLogAnomalyDetectors

$result = $client->listLogAnomalyDetectors([/* ... */]);
$promise = $client->listLogAnomalyDetectorsAsync([/* ... */]);

Retrieves a list of the log anomaly detectors in the account.

Parameter Syntax

$result = $client->listLogAnomalyDetectors([
    'filterLogGroupArn' => '<string>',
    'limit' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'anomalyDetectors' => [
        [
            'anomalyDetectorArn' => '<string>',
            'anomalyDetectorStatus' => 'INITIALIZING|TRAINING|ANALYZING|FAILED|DELETED|PAUSED',
            'anomalyVisibilityTime' => <integer>,
            'creationTimeStamp' => <integer>,
            'detectorName' => '<string>',
            'evaluationFrequency' => 'ONE_MIN|FIVE_MIN|TEN_MIN|FIFTEEN_MIN|THIRTY_MIN|ONE_HOUR',
            'filterPattern' => '<string>',
            'kmsKeyId' => '<string>',
            'lastModifiedTimeStamp' => <integer>,
            'logGroupArnList' => ['<string>', ...],
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ListTagsForResource

$result = $client->listTagsForResource([/* ... */]);
$promise = $client->listTagsForResourceAsync([/* ... */]);

Displays the tags associated with a CloudWatch Logs resource. Currently, log groups and destinations support tagging.

Parameter Syntax

$result = $client->listTagsForResource([
    'resourceArn' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'tags' => ['<string>', ...],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

ListTagsLogGroup

$result = $client->listTagsLogGroup([/* ... */]);
$promise = $client->listTagsLogGroupAsync([/* ... */]);

The ListTagsLogGroup operation is on the path to deprecation. We recommend that you use ListTagsForResource instead.

Lists the tags for the specified log group.

Parameter Syntax

$result = $client->listTagsLogGroup([
    'logGroupName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'tags' => ['<string>', ...],
]

Result Details

Errors

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

PutAccountPolicy

$result = $client->putAccountPolicy([/* ... */]);
$promise = $client->putAccountPolicyAsync([/* ... */]);

Creates an account-level data protection policy or subscription filter policy that applies to all log groups or a subset of log groups in the account.

Data protection policy

A data protection policy can help safeguard sensitive data that's ingested by your log groups by auditing and masking the sensitive log data. Each account can have only one account-level data protection policy.

If you use PutAccountPolicy to create a data protection policy for your whole account, it applies to both existing log groups and all log groups that are created later in this account. The account-level policy is applied to existing log groups with eventual consistency. It might take up to 5 minutes before sensitive data in existing log groups begins to be masked.

By default, when a user views a log event that includes masked data, the sensitive data is replaced by asterisks. A user who has the logs:Unmask permission can use a GetLogEvents or FilterLogEvents operation with the unmask parameter set to true to view the unmasked log events. Users with the logs:Unmask can also view unmasked data in the CloudWatch Logs console by running a CloudWatch Logs Insights query with the unmask query command.

For more information, including a list of types of data that can be audited and masked, see Protect sensitive log data with masking.

To use the PutAccountPolicy operation for a data protection policy, you must be signed on with the logs:PutDataProtectionPolicy and logs:PutAccountPolicy permissions.

The PutAccountPolicy operation applies to all log groups in the account. You can use PutDataProtectionPolicy to create a data protection policy that applies to just one log group. If a log group has its own data protection policy and the account also has an account-level data protection policy, then the two policies are cumulative. Any sensitive term specified in either policy is masked.

Subscription filter policy

A subscription filter policy sets up a real-time feed of log events from CloudWatch Logs to other Amazon Web Services services. Account-level subscription filter policies apply to both existing log groups and log groups that are created later in this account. Supported destinations are Kinesis Data Streams, Firehose, and Lambda. When log events are sent to the receiving service, they are Base64 encoded and compressed with the GZIP format.

The following destinations are supported for subscription filters:

• An Kinesis Data Streams data stream in the same account as the subscription policy, for same-account delivery.

• An Firehose data stream in the same account as the subscription policy, for same-account delivery.

• A Lambda function in the same account as the subscription policy, for same-account delivery.

• A logical destination in a different account created with PutDestination, for cross-account delivery. Kinesis Data Streams and Firehose are supported as logical destinations.

Each account can have one account-level subscription filter policy per Region. If you are updating an existing filter, you must specify the correct name in PolicyName. To perform a PutAccountPolicy subscription filter operation for any destination except a Lambda function, you must also have the iam:PassRole permission.

Parameter Syntax

$result = $client->putAccountPolicy([
    'policyDocument' => '<string>', // REQUIRED
    'policyName' => '<string>', // REQUIRED
    'policyType' => 'DATA_PROTECTION_POLICY|SUBSCRIPTION_FILTER_POLICY', // REQUIRED
    'scope' => 'ALL',
    'selectionCriteria' => '<string>',
]);

Parameter Details

Result Syntax

[
    'accountPolicy' => [
        'accountId' => '<string>',
        'lastUpdatedTime' => <integer>,
        'policyDocument' => '<string>',
        'policyName' => '<string>',
        'policyType' => 'DATA_PROTECTION_POLICY|SUBSCRIPTION_FILTER_POLICY',
        'scope' => 'ALL',
        'selectionCriteria' => '<string>',
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

LimitExceededException:

You have reached the maximum number of resources that can be created.

PutDataProtectionPolicy

$result = $client->putDataProtectionPolicy([/* ... */]);
$promise = $client->putDataProtectionPolicyAsync([/* ... */]);

Creates a data protection policy for the specified log group. A data protection policy can help safeguard sensitive data that's ingested by the log group by auditing and masking the sensitive log data.

By default, when a user views a log event that includes masked data, the sensitive data is replaced by asterisks. A user who has the logs:Unmask permission can use a GetLogEvents or FilterLogEvents operation with the unmask parameter set to true to view the unmasked log events. Users with the logs:Unmask can also view unmasked data in the CloudWatch Logs console by running a CloudWatch Logs Insights query with the unmask query command.

For more information, including a list of types of data that can be audited and masked, see Protect sensitive log data with masking.

The PutDataProtectionPolicy operation applies to only the specified log group. You can also use PutAccountPolicy to create an account-level data protection policy that applies to all log groups in the account, including both existing log groups and log groups that are created level. If a log group has its own data protection policy and the account also has an account-level data protection policy, then the two policies are cumulative. Any sensitive term specified in either policy is masked.

Parameter Syntax

$result = $client->putDataProtectionPolicy([
    'logGroupIdentifier' => '<string>', // REQUIRED
    'policyDocument' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'lastUpdatedTime' => <integer>,
    'logGroupIdentifier' => '<string>',
    'policyDocument' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

LimitExceededException:

You have reached the maximum number of resources that can be created.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

PutDeliveryDestination

$result = $client->putDeliveryDestination([/* ... */]);
$promise = $client->putDeliveryDestinationAsync([/* ... */]);

Creates or updates a logical delivery destination. A delivery destination is an Amazon Web Services resource that represents an Amazon Web Services service that logs can be sent to. CloudWatch Logs, Amazon S3, and Firehose are supported as logs delivery destinations.

To configure logs delivery between a supported Amazon Web Services service and a destination, you must do the following:

• Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource.

• Use PutDeliveryDestination to create a delivery destination, which is a logical object that represents the actual delivery destination.

• If you are delivering logs cross-account, you must use PutDeliveryDestinationPolicy in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination.

• Use CreateDelivery to create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery.

You can configure a single delivery source to send logs to multiple destinations by creating multiple deliveries. You can also create multiple deliveries to configure multiple delivery sources to send logs to the same delivery destination.

Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services.

If you use this operation to update an existing delivery destination, all the current delivery destination parameters are overwritten with the new parameter values that you specify.

Parameter Syntax

$result = $client->putDeliveryDestination([
    'deliveryDestinationConfiguration' => [ // REQUIRED
        'destinationResourceArn' => '<string>', // REQUIRED
    ],
    'name' => '<string>', // REQUIRED
    'outputFormat' => 'json|plain|w3c|raw|parquet',
    'tags' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'deliveryDestination' => [
        'arn' => '<string>',
        'deliveryDestinationConfiguration' => [
            'destinationResourceArn' => '<string>',
        ],
        'deliveryDestinationType' => 'S3|CWL|FH',
        'name' => '<string>',
        'outputFormat' => 'json|plain|w3c|raw|parquet',
        'tags' => ['<string>', ...],
    ],
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ConflictException:

This operation attempted to create a resource that already exists.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ThrottlingException:

The request was throttled because of quota limits.

ResourceNotFoundException:

The specified resource does not exist.

PutDeliveryDestinationPolicy

$result = $client->putDeliveryDestinationPolicy([/* ... */]);
$promise = $client->putDeliveryDestinationPolicyAsync([/* ... */]);

Creates and assigns an IAM policy that grants permissions to CloudWatch Logs to deliver logs cross-account to a specified destination in this account. To configure the delivery of logs from an Amazon Web Services service in another account to a logs delivery destination in the current account, you must do the following:

• Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource.

• Create a delivery destination, which is a logical object that represents the actual delivery destination. For more information, see PutDeliveryDestination.

• Use this operation in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination.

• Create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery.

Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services.

The contents of the policy must include two statements. One statement enables general logs delivery, and the other allows delivery to the chosen destination. See the examples for the needed policies.

Parameter Syntax

$result = $client->putDeliveryDestinationPolicy([
    'deliveryDestinationName' => '<string>', // REQUIRED
    'deliveryDestinationPolicy' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'policy' => [
        'deliveryDestinationPolicy' => '<string>',
    ],
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ValidationException:

One of the parameters for the request is not valid.

ResourceNotFoundException:

The specified resource does not exist.

ConflictException:

This operation attempted to create a resource that already exists.

PutDeliverySource

$result = $client->putDeliverySource([/* ... */]);
$promise = $client->putDeliverySourceAsync([/* ... */]);

Creates or updates a logical delivery source. A delivery source represents an Amazon Web Services resource that sends logs to an logs delivery destination. The destination can be CloudWatch Logs, Amazon S3, or Firehose.

To configure logs delivery between a delivery destination and an Amazon Web Services service that is supported as a delivery source, you must do the following:

• Use PutDeliverySource to create a delivery source, which is a logical object that represents the resource that is actually sending the logs.

• Use PutDeliveryDestination to create a delivery destination, which is a logical object that represents the actual delivery destination. For more information, see PutDeliveryDestination.

• If you are delivering logs cross-account, you must use PutDeliveryDestinationPolicy in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination.

• Use CreateDelivery to create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery.

You can configure a single delivery source to send logs to multiple destinations by creating multiple deliveries. You can also create multiple deliveries to configure multiple delivery sources to send logs to the same delivery destination.

Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services.

If you use this operation to update an existing delivery source, all the current delivery source parameters are overwritten with the new parameter values that you specify.

Parameter Syntax

$result = $client->putDeliverySource([
    'logType' => '<string>', // REQUIRED
    'name' => '<string>', // REQUIRED
    'resourceArn' => '<string>', // REQUIRED
    'tags' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'deliverySource' => [
        'arn' => '<string>',
        'logType' => '<string>',
        'name' => '<string>',
        'resourceArns' => ['<string>', ...],
        'service' => '<string>',
        'tags' => ['<string>', ...],
    ],
]

Result Details

Errors

ServiceUnavailableException:

The service cannot complete the request.

ConflictException:

This operation attempted to create a resource that already exists.

ValidationException:

One of the parameters for the request is not valid.

ServiceQuotaExceededException:

This request exceeds a service quota.

ResourceNotFoundException:

The specified resource does not exist.

ThrottlingException:

The request was throttled because of quota limits.

PutDestination

$result = $client->putDestination([/* ... */]);
$promise = $client->putDestinationAsync([/* ... */]);

Creates or updates a destination. This operation is used only to create destinations for cross-account subscriptions.

A destination encapsulates a physical resource (such as an Amazon Kinesis stream). With a destination, you can subscribe to a real-time stream of log events for a different account, ingested using PutLogEvents.

Through an access policy, a destination controls what is written to it. By default, PutDestination does not set any access policy with the destination, which means a cross-account user cannot call PutSubscriptionFilter against this destination. To enable this, the destination owner must call PutDestinationPolicy after PutDestination.

To perform a PutDestination operation, you must also have the iam:PassRole permission.

Parameter Syntax

$result = $client->putDestination([
    'destinationName' => '<string>', // REQUIRED
    'roleArn' => '<string>', // REQUIRED
    'tags' => ['<string>', ...],
    'targetArn' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'destination' => [
        'accessPolicy' => '<string>',
        'arn' => '<string>',
        'creationTime' => <integer>,
        'destinationName' => '<string>',
        'roleArn' => '<string>',
        'targetArn' => '<string>',
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

PutDestinationPolicy

$result = $client->putDestinationPolicy([/* ... */]);
$promise = $client->putDestinationPolicyAsync([/* ... */]);

Creates or updates an access policy associated with an existing destination. An access policy is an IAM policy document that is used to authorize claims to register a subscription filter against a given destination.

Parameter Syntax

$result = $client->putDestinationPolicy([
    'accessPolicy' => '<string>', // REQUIRED
    'destinationName' => '<string>', // REQUIRED
    'forceUpdate' => true || false,
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

PutLogEvents

$result = $client->putLogEvents([/* ... */]);
$promise = $client->putLogEventsAsync([/* ... */]);

Uploads a batch of log events to the specified log stream.

The batch of events must satisfy the following constraints:

• The maximum batch size is 1,048,576 bytes. This size is calculated as the sum of all event messages in UTF-8, plus 26 bytes for each log event.

• None of the log events in the batch can be more than 2 hours in the future.

• None of the log events in the batch can be more than 14 days in the past. Also, none of the log events can be from earlier than the retention period of the log group.

• The log events in the batch must be in chronological order by their timestamp. The timestamp is the time that the event occurred, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. (In Amazon Web Services Tools for PowerShell and the Amazon Web Services SDK for .NET, the timestamp is specified in .NET format: yyyy-mm-ddThh:mm:ss. For example, 2017-09-15T13:45:30.)

• A batch of log events in a single request cannot span more than 24 hours. Otherwise, the operation fails.

• Each log event can be no larger than 256 KB.

• The maximum number of log events in a batch is 10,000.

• The quota of five requests per second per log stream has been removed. Instead, PutLogEvents actions are throttled based on a per-second per-account quota. You can request an increase to the per-second throttling quota by using the Service Quotas service.

If a call to PutLogEvents returns "UnrecognizedClientException" the most likely cause is a non-valid Amazon Web Services access key ID or secret key.

Parameter Syntax

$result = $client->putLogEvents([
    'entity' => [
        'attributes' => ['<string>', ...],
        'keyAttributes' => ['<string>', ...],
    ],
    'logEvents' => [ // REQUIRED
        [
            'message' => '<string>', // REQUIRED
            'timestamp' => <integer>, // REQUIRED
        ],
        // ...
    ],
    'logGroupName' => '<string>', // REQUIRED
    'logStreamName' => '<string>', // REQUIRED
    'sequenceToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'nextSequenceToken' => '<string>',
    'rejectedEntityInfo' => [
        'errorType' => 'InvalidEntity|InvalidTypeValue|InvalidKeyAttributes|InvalidAttributes|EntitySizeTooLarge|UnsupportedLogGroupType|MissingRequiredFields',
    ],
    'rejectedLogEventsInfo' => [
        'expiredLogEventEndIndex' => <integer>,
        'tooNewLogEventStartIndex' => <integer>,
        'tooOldLogEventEndIndex' => <integer>,
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

InvalidSequenceTokenException:

The sequence token is not valid. You can get the correct sequence token in the expectedSequenceToken field in the InvalidSequenceTokenException message.

PutLogEvents actions are now always accepted and never return InvalidSequenceTokenException regardless of receiving an invalid sequence token.

DataAlreadyAcceptedException:

The event was already logged.

PutLogEvents actions are now always accepted and never return DataAlreadyAcceptedException regardless of whether a given batch of log events has already been accepted.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

UnrecognizedClientException:

The most likely cause is an Amazon Web Services access key ID or secret key that's not valid.

PutMetricFilter

$result = $client->putMetricFilter([/* ... */]);
$promise = $client->putMetricFilterAsync([/* ... */]);

Creates or updates a metric filter and associates it with the specified log group. With metric filters, you can configure rules to extract metric data from log events ingested through PutLogEvents.

The maximum number of metric filters that can be associated with a log group is 100.

Using regular expressions to create metric filters is supported. For these filters, there is a quotas of quota of two regular expression patterns within a single filter pattern. There is also a quota of five regular expression patterns per log group. For more information about using regular expressions in metric filters, see Filter pattern syntax for metric filters, subscription filters, filter log events, and Live Tail.

When you create a metric filter, you can also optionally assign a unit and dimensions to the metric that is created.

Parameter Syntax

$result = $client->putMetricFilter([
    'filterName' => '<string>', // REQUIRED
    'filterPattern' => '<string>', // REQUIRED
    'logGroupName' => '<string>', // REQUIRED
    'metricTransformations' => [ // REQUIRED
        [
            'defaultValue' => <float>,
            'dimensions' => ['<string>', ...],
            'metricName' => '<string>', // REQUIRED
            'metricNamespace' => '<string>', // REQUIRED
            'metricValue' => '<string>', // REQUIRED
            'unit' => 'Seconds|Microseconds|Milliseconds|Bytes|Kilobytes|Megabytes|Gigabytes|Terabytes|Bits|Kilobits|Megabits|Gigabits|Terabits|Percent|Count|Bytes/Second|Kilobytes/Second|Megabytes/Second|Gigabytes/Second|Terabytes/Second|Bits/Second|Kilobits/Second|Megabits/Second|Gigabits/Second|Terabits/Second|Count/Second|None',
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

LimitExceededException:

You have reached the maximum number of resources that can be created.

ServiceUnavailableException:

The service cannot complete the request.

PutQueryDefinition

$result = $client->putQueryDefinition([/* ... */]);
$promise = $client->putQueryDefinitionAsync([/* ... */]);

Creates or updates a query definition for CloudWatch Logs Insights. For more information, see Analyzing Log Data with CloudWatch Logs Insights.

To update a query definition, specify its queryDefinitionId in your request. The values of name, queryString, and logGroupNames are changed to the values that you specify in your update operation. No current values are retained from the current query definition. For example, imagine updating a current query definition that includes log groups. If you don't specify the logGroupNames parameter in your update operation, the query definition changes to contain no log groups.

You must have the logs:PutQueryDefinition permission to be able to perform this operation.

Parameter Syntax

$result = $client->putQueryDefinition([
    'clientToken' => '<string>',
    'logGroupNames' => ['<string>', ...],
    'name' => '<string>', // REQUIRED
    'queryDefinitionId' => '<string>',
    'queryString' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'queryDefinitionId' => '<string>',
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

LimitExceededException:

You have reached the maximum number of resources that can be created.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

PutResourcePolicy

$result = $client->putResourcePolicy([/* ... */]);
$promise = $client->putResourcePolicyAsync([/* ... */]);

Creates or updates a resource policy allowing other Amazon Web Services services to put log events to this account, such as Amazon Route 53. An account can have up to 10 resource policies per Amazon Web Services Region.

Parameter Syntax

$result = $client->putResourcePolicy([
    'policyDocument' => '<string>',
    'policyName' => '<string>',
]);

Parameter Details

Result Syntax

[
    'resourcePolicy' => [
        'lastUpdatedTime' => <integer>,
        'policyDocument' => '<string>',
        'policyName' => '<string>',
    ],
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

LimitExceededException:

You have reached the maximum number of resources that can be created.

ServiceUnavailableException:

The service cannot complete the request.

PutRetentionPolicy

$result = $client->putRetentionPolicy([/* ... */]);
$promise = $client->putRetentionPolicyAsync([/* ... */]);

Sets the retention of the specified log group. With a retention policy, you can configure the number of days for which to retain log events in the specified log group.

Parameter Syntax

$result = $client->putRetentionPolicy([
    'logGroupName' => '<string>', // REQUIRED
    'retentionInDays' => <integer>, // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

ServiceUnavailableException:

The service cannot complete the request.

PutSubscriptionFilter

$result = $client->putSubscriptionFilter([/* ... */]);
$promise = $client->putSubscriptionFilterAsync([/* ... */]);

Creates or updates a subscription filter and associates it with the specified log group. With subscription filters, you can subscribe to a real-time stream of log events ingested through PutLogEvents and have them delivered to a specific destination. When log events are sent to the receiving service, they are Base64 encoded and compressed with the GZIP format.

The following destinations are supported for subscription filters:

• An Amazon Kinesis data stream belonging to the same account as the subscription filter, for same-account delivery.

• A logical destination created with PutDestination that belongs to a different account, for cross-account delivery. We currently support Kinesis Data Streams and Firehose as logical destinations.

• An Amazon Kinesis Data Firehose delivery stream that belongs to the same account as the subscription filter, for same-account delivery.

• An Lambda function that belongs to the same account as the subscription filter, for same-account delivery.

Each log group can have up to two subscription filters associated with it. If you are updating an existing filter, you must specify the correct name in filterName.

Using regular expressions to create subscription filters is supported. For these filters, there is a quotas of quota of two regular expression patterns within a single filter pattern. There is also a quota of five regular expression patterns per log group. For more information about using regular expressions in subscription filters, see Filter pattern syntax for metric filters, subscription filters, filter log events, and Live Tail.

To perform a PutSubscriptionFilter operation for any destination except a Lambda function, you must also have the iam:PassRole permission.

Parameter Syntax

$result = $client->putSubscriptionFilter([
    'destinationArn' => '<string>', // REQUIRED
    'distribution' => 'Random|ByLogStream',
    'filterName' => '<string>', // REQUIRED
    'filterPattern' => '<string>', // REQUIRED
    'logGroupName' => '<string>', // REQUIRED
    'roleArn' => '<string>',
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

OperationAbortedException:

Multiple concurrent requests to update the same resource were in conflict.

LimitExceededException:

You have reached the maximum number of resources that can be created.

ServiceUnavailableException:

The service cannot complete the request.

StartLiveTail

$result = $client->startLiveTail([/* ... */]);
$promise = $client->startLiveTailAsync([/* ... */]);

Starts a Live Tail streaming session for one or more log groups. A Live Tail session returns a stream of log events that have been recently ingested in the log groups. For more information, see Use Live Tail to view logs in near real time.

The response to this operation is a response stream, over which the server sends live log events and the client receives them.

The following objects are sent over the stream:

• A single LiveTailSessionStart object is sent at the start of the session.

• Every second, a LiveTailSessionUpdate object is sent. Each of these objects contains an array of the actual log events.

  If no new log events were ingested in the past second, the LiveTailSessionUpdate object will contain an empty array.

  The array of log events contained in a LiveTailSessionUpdate can include as many as 500 log events. If the number of log events matching the request exceeds 500 per second, the log events are sampled down to 500 log events to be included in each LiveTailSessionUpdate object.

  If your client consumes the log events slower than the server produces them, CloudWatch Logs buffers up to 10 LiveTailSessionUpdate events or 5000 log events, after which it starts dropping the oldest events.

• A SessionStreamingException object is returned if an unknown error occurs on the server side.

• A SessionTimeoutException object is returned when the session times out, after it has been kept open for three hours.

For examples of using an SDK to start a Live Tail session, see Start a Live Tail session using an Amazon Web Services SDK.

Parameter Syntax

$result = $client->startLiveTail([
    'logEventFilterPattern' => '<string>',
    'logGroupIdentifiers' => ['<string>', ...], // REQUIRED
    'logStreamNamePrefixes' => ['<string>', ...],
    'logStreamNames' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'responseStream' => [ // EventParsingIterator
        'SessionStreamingException' => [
            'message' => '<string>',
        ],
        'SessionTimeoutException' => [
            'message' => '<string>',
        ],
        'sessionStart' => [
            'logEventFilterPattern' => '<string>',
            'logGroupIdentifiers' => ['<string>', ...],
            'logStreamNamePrefixes' => ['<string>', ...],
            'logStreamNames' => ['<string>', ...],
            'requestId' => '<string>',
            'sessionId' => '<string>',
        ],
        'sessionUpdate' => [
            'sessionMetadata' => [
                'sampled' => true || false,
            ],
            'sessionResults' => [
                [
                    'ingestionTime' => <integer>,
                    'logGroupIdentifier' => '<string>',
                    'logStreamName' => '<string>',
                    'message' => '<string>',
                    'timestamp' => <integer>,
                ],
                // ...
            ],
        ],
    ],
]

Result Details

Using an EventParsingIterator

To use an EventParsingIterator, you will need to loop over the events it will generate and check the top-level field to determine which type of event it is.

foreach($result['responseStream'] as $event) {
    if (isset($event['SessionStreamingException'])) {
        // Handle the 'SessionStreamingException' event.
    } else if (isset($event['SessionTimeoutException'])) {
        // Handle the 'SessionTimeoutException' event.
    } else if (isset($event['sessionStart'])) {
        // Handle the 'sessionStart' event.
    } else if (isset($event['sessionUpdate'])) {
        // Handle the 'sessionUpdate' event.
    }
}

Errors

AccessDeniedException:

You don't have sufficient permissions to perform this action.

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

LimitExceededException:

You have reached the maximum number of resources that can be created.

InvalidOperationException:

The operation is not valid on the specified resource.

StartQuery

$result = $client->startQuery([/* ... */]);
$promise = $client->startQueryAsync([/* ... */]);

Schedules a query of a log group using CloudWatch Logs Insights. You specify the log group and time range to query and the query string to use.

For more information, see CloudWatch Logs Insights Query Syntax.

After you run a query using StartQuery, the query results are stored by CloudWatch Logs. You can use GetQueryResults to retrieve the results of a query, using the queryId that StartQuery returns.

If you have associated a KMS key with the query results in this account, then StartQuery uses that key to encrypt the results when it stores them. If no key is associated with query results, the query results are encrypted with the default CloudWatch Logs encryption method.

Queries time out after 60 minutes of runtime. If your queries are timing out, reduce the time range being searched or partition your query into a number of queries.

If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account to start a query in a linked source account. For more information, see CloudWatch cross-account observability. For a cross-account StartQuery operation, the query definition must be defined in the monitoring account.

You can have up to 30 concurrent CloudWatch Logs insights queries, including queries that have been added to dashboards.

Parameter Syntax

$result = $client->startQuery([
    'endTime' => <integer>, // REQUIRED
    'limit' => <integer>,
    'logGroupIdentifiers' => ['<string>', ...],
    'logGroupName' => '<string>',
    'logGroupNames' => ['<string>', ...],
    'queryString' => '<string>', // REQUIRED
    'startTime' => <integer>, // REQUIRED
]);

Parameter Details

Result Syntax

[
    'queryId' => '<string>',
]

Result Details

Errors

MalformedQueryException:

The query string is not valid. Details about this error are displayed in a QueryCompileError object. For more information, see QueryCompileError.

For more information about valid query syntax, see CloudWatch Logs Insights Query Syntax.

InvalidParameterException:

A parameter is specified incorrectly.

LimitExceededException:

You have reached the maximum number of resources that can be created.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

StopQuery

$result = $client->stopQuery([/* ... */]);
$promise = $client->stopQueryAsync([/* ... */]);

Stops a CloudWatch Logs Insights query that is in progress. If the query has already ended, the operation returns an error indicating that the specified query is not running.

Parameter Syntax

$result = $client->stopQuery([
    'queryId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'success' => true || false,
]

Result Details

Errors

InvalidParameterException:

A parameter is specified incorrectly.

ResourceNotFoundException:

The specified resource does not exist.

ServiceUnavailableException:

The service cannot complete the request.

TagLogGroup

$result = $client->tagLogGroup([/* ... */]);
$promise = $client->tagLogGroupAsync([/* ... */]);

The TagLogGroup operation is on the path to deprecation. We recommend that you use TagResource instead.

Adds or updates the specified tags for the specified log group.

To list the tags for a log group, use ListTagsForResource. To remove tags, use UntagResource.

For more information about tags, see Tag Log Groups in Amazon CloudWatch Logs in the Amazon CloudWatch Logs User Guide.

CloudWatch Logs doesn't support IAM policies that prevent users from assigning specified tags to log groups using the aws:Resource/key-name or aws:TagKeys condition keys. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags.

Parameter Syntax

$result = $client->tagLogGroup([
    'logGroupName' => '<string>', // REQUIRED
    'tags' => ['<string>', ...], // REQUIRED
]);

Parameter Details