Testing web ACLs
Warning
AWS WAF Classic support will end on September 30, 2025.
Note
This is AWS WAF Classic documentation. You should only use this version if you created AWS WAF resources, like rules and web ACLs, in AWS WAF prior to November 2019, and you have not migrated them over to the latest version yet. To migrate your web ACLs, see Migrating your AWS WAF Classic resources to AWS WAF.
For the latest version of AWS WAF, see AWS WAF.
To ensure that you don't accidentally configure AWS WAF Classic to block web requests that you want to allow or allow requests that you want to block, we recommend that you test your web ACL thoroughly before you start using it on your website or web application.
Topics
Counting the web requests that match the rules in a web ACL
When you add rules to a web ACL, you specify whether you want AWS WAF Classic to allow, block, or count the web requests that match all the conditions in that rule. We recommend that you begin with the following configuration:
Configure all the rules in a web ACL to count web requests
Set the default action for the web ACL to allow requests
In this configuration, AWS WAF Classic inspects each web request based on the conditions in the first rule. If the web request matches all the conditions in that rule, AWS WAF Classic increments a counter for that rule. Then AWS WAF Classic inspects the web request based on the conditions in the next rule. If the request matches all the conditions in that rule, AWS WAF Classic increments a counter for the rule. This continues until AWS WAF Classic has inspected the request based on the conditions in all of your rules.
After you've configured all the rules in a web ACL to count requests and associated the web ACL with an Amazon API Gateway API, CloudFront distribution or Application Load Balancer, you can view the resulting counts in an Amazon CloudWatch graph. For each rule in a web ACL and for all the requests that API Gateway, CloudFront or an Application Load Balancer forwards to AWS WAF Classic for a web ACL, CloudWatch lets you:
View data for the preceding hour or preceding three hours,
Change the interval between data points
Change the calculation that CloudWatch performs on the data, such as maximum, minimum, average, or sum
Note
AWS WAF Classic with CloudFront is a global service and metrics are available only when you choose the US East (N. Virginia) Region in the AWS Management Console. If you choose another region, no AWS WAF Classic metrics will appear in the CloudWatch console.
To view data for the rules in a web ACL
Sign in to the AWS Management Console and open the CloudWatch console at https://console.aws.amazon.com/cloudwatch/
. In the navigation pane, under Metrics, choose WAF.
Select the check box for the web ACL that you want to view data for.
Change the applicable settings:
- Statistic
Choose the calculation that CloudWatch performs on the data.
- Time range
Choose whether you want to view data for the preceding hour or the preceding three hours.
- Period
Choose the interval between data points in the graph.
- Rules
Choose the rules for which you want to view data.
Note the following:
If you just associated a web ACL with an API Gateway API, CloudFront distribution or Application Load Balancer, you might need to wait a few minutes for data to appear in the graph and for the metric for the web ACL to appear in the list of available metrics.
If you associate more than one API Gateway API, CloudFront distribution or Application Load Balancer with a web ACL, the CloudWatch data will include all the requests for all the distributions that are associated with the web ACL.
You can hover the mouse cursor over a data point to get more information.
-
The graph doesn't refresh itself automatically. To update the display, choose the refresh (
) icon.
(Optional) View detailed information about individual requests that API Gateway CloudFront or an Application Load Balancer has forwarded to AWS WAF Classic. For more information, see Viewing a sample of the web requests that API Gateway CloudFront or an Application Load Balancer has forwarded to AWS WAF Classic.
If you determine that a rule is intercepting requests that you don't want it to intercept, change the applicable settings. For more information, see Creating and configuring a Web Access Control List (Web ACL).
When you're satisfied that all of your rules are intercepting only the correct requests, change the action for each of your rules to Allow or Block. For more information, see Editing a Web ACL.
Viewing a sample of the web requests that API Gateway CloudFront or an Application Load Balancer has forwarded to AWS WAF Classic
In the AWS WAF Classic console, you can view a sample of the requests that API Gateway CloudFront or an Application Load Balancer has forwarded to AWS WAF Classic for inspection. For each sampled request, you can view detailed data about the request, such as the originating IP address and the headers included in the request. You also can view which rule the request matched, and whether the rule is configured to allow or block requests.
The sample of requests contains up to 100 requests that matched all the conditions in each rule and another 100 requests for the default action, which applies to requests that didn't match all the conditions in any rule. The requests in the sample come from all the API Gateway APIs, CloudFront edge locations or Application Load Balancers that have received requests for your content in the previous 15 minutes.
To view a sample of the web requests that API Gateway; CloudFront or an Application Load Balancer has forwarded to AWS WAF Classic
Sign in to the AWS Management Console and open the AWS WAF console at https://console.aws.amazon.com/wafv2/
. If you see Switch to AWS WAF Classic in the navigation pane, select it.
In the navigation pane, choose the web ACL for which you want to view requests.
In the right pane, choose the Requests tab.
The Sampled requests table displays the following values for each request:
- Source IP
Either the IP address that the request originated from or, if the viewer used an HTTP proxy or an Application Load Balancer to send the request, the IP address of the proxy or Application Load Balancer.
- URI
The URI path of the request, which identifies the resource, for example,
/images/daily-ad.jpg. This doesn't include the query string or fragment components of the URI. For information, see Uniform Resource Identifier (URI): Generic Syntax. - Matches rule
Identifies the first rule in the web ACL for which the web request matched all the conditions. If a web request doesn't match all the conditions in any rule in the web ACL, the value of Matches rule is Default.
Note that when a web request matches all the conditions in a rule and the action for that rule is Count, AWS WAF Classic continues inspecting the web request based on subsequent rules in the web ACL. In this case, a web request could appear twice in the list of sampled requests: once for the rule that has an action of Count and again for a subsequent rule or for the default action.
- Action
Indicates whether the action for the corresponding rule is Allow, Block, or Count.
- Time
The time that AWS WAF Classic received the request from API Gateway, CloudFront or your Application Load Balancer.
To display additional information about the request, choose the arrow on the left side of the IP address for that request. AWS WAF Classic displays the following information:
- Source IP
The same IP address as the value in the Source IP column in the table.
- Country
The two-letter country code of the country that the request originated from. If the viewer used an HTTP proxy or an Application Load Balancer to send the request, this is the two-letter country code of the country that the HTTP proxy or an Application Load Balancer is in.
For a list of two-letter country codes and the corresponding country names, see the Wikipedia entry ISO 3166-1 alpha-2
. - Method
The HTTP request method for the request:
GET,HEAD,OPTIONS,PUT,POST,PATCH, orDELETE.- URI
The same URI as the value in the URI column in the table.
- Request headers
The request headers and header values in the request.
To refresh the list of sample requests, choose Get new samples.
