AcceptAddressTransfer

$result = $client->acceptAddressTransfer([/* ... */]);
$promise = $client->acceptAddressTransferAsync([/* ... */]);

Accepts an Elastic IP address transfer. For more information, see Accept a transferred Elastic IP address in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->acceptAddressTransfer([
    'Address' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'TagSpecifications' => [
        [
            'ResourceType' => 'capacity-reservation|client-vpn-endpoint|customer-gateway|carrier-gateway|coip-pool|dedicated-host|dhcp-options|egress-only-internet-gateway|elastic-ip|elastic-gpu|export-image-task|export-instance-task|fleet|fpga-image|host-reservation|image|import-image-task|import-snapshot-task|instance|instance-event-window|internet-gateway|ipam|ipam-pool|ipam-scope|ipv4pool-ec2|ipv6pool-ec2|key-pair|launch-template|local-gateway|local-gateway-route-table|local-gateway-virtual-interface|local-gateway-virtual-interface-group|local-gateway-route-table-vpc-association|local-gateway-route-table-virtual-interface-group-association|natgateway|network-acl|network-interface|network-insights-analysis|network-insights-path|network-insights-access-scope|network-insights-access-scope-analysis|placement-group|prefix-list|replace-root-volume-task|reserved-instances|route-table|security-group|security-group-rule|snapshot|spot-fleet-request|spot-instances-request|subnet|subnet-cidr-reservation|traffic-mirror-filter|traffic-mirror-session|traffic-mirror-target|transit-gateway|transit-gateway-attachment|transit-gateway-connect-peer|transit-gateway-multicast-domain|transit-gateway-policy-table|transit-gateway-route-table|transit-gateway-route-table-announcement|volume|vpc|vpc-endpoint|vpc-endpoint-connection|vpc-endpoint-service|vpc-endpoint-service-permission|vpc-peering-connection|vpn-connection|vpn-gateway|vpc-flow-log|capacity-reservation-fleet|traffic-mirror-filter-rule|vpc-endpoint-connection-device-type|verified-access-instance|verified-access-group|verified-access-endpoint|verified-access-policy|verified-access-trust-provider|vpn-connection-device-type|vpc-block-public-access-exclusion|ipam-resource-discovery|ipam-resource-discovery-association|instance-connect-endpoint|ipam-external-resource-verification-token',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[
    'AddressTransfer' => [
        'AddressTransferStatus' => 'pending|disabled|accepted',
        'AllocationId' => '<string>',
        'PublicIp' => '<string>',
        'TransferAccountId' => '<string>',
        'TransferOfferAcceptedTimestamp' => <DateTime>,
        'TransferOfferExpirationTimestamp' => <DateTime>,
    ],
]

Result Details

Errors

There are no errors described for this operation.

AcceptCapacityReservationBillingOwnership

$result = $client->acceptCapacityReservationBillingOwnership([/* ... */]);
$promise = $client->acceptCapacityReservationBillingOwnershipAsync([/* ... */]);

Accepts a request to assign billing of the available capacity of a shared Capacity Reservation to your account. For more information, see Billing assignment for shared Amazon EC2 Capacity Reservations.

Parameter Syntax

$result = $client->acceptCapacityReservationBillingOwnership([
    'CapacityReservationId' => '<string>', // REQUIRED
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[
    'Return' => true || false,
]

Result Details

Errors

There are no errors described for this operation.

AcceptReservedInstancesExchangeQuote

$result = $client->acceptReservedInstancesExchangeQuote([/* ... */]);
$promise = $client->acceptReservedInstancesExchangeQuoteAsync([/* ... */]);

Accepts the Convertible Reserved Instance exchange quote described in the GetReservedInstancesExchangeQuote call.

Parameter Syntax

$result = $client->acceptReservedInstancesExchangeQuote([
    'DryRun' => true || false,
    'ReservedInstanceIds' => ['<string>', ...], // REQUIRED
    'TargetConfigurations' => [
        [
            'InstanceCount' => <integer>,
            'OfferingId' => '<string>', // REQUIRED
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[
    'ExchangeId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AcceptTransitGatewayMulticastDomainAssociations

$result = $client->acceptTransitGatewayMulticastDomainAssociations([/* ... */]);
$promise = $client->acceptTransitGatewayMulticastDomainAssociationsAsync([/* ... */]);

Accepts a request to associate subnets with a transit gateway multicast domain.

Parameter Syntax

$result = $client->acceptTransitGatewayMulticastDomainAssociations([
    'DryRun' => true || false,
    'SubnetIds' => ['<string>', ...],
    'TransitGatewayAttachmentId' => '<string>',
    'TransitGatewayMulticastDomainId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'Associations' => [
        'ResourceId' => '<string>',
        'ResourceOwnerId' => '<string>',
        'ResourceType' => 'vpc|vpn|direct-connect-gateway|connect|peering|tgw-peering',
        'Subnets' => [
            [
                'State' => 'pendingAcceptance|associating|associated|disassociating|disassociated|rejected|failed',
                'SubnetId' => '<string>',
            ],
            // ...
        ],
        'TransitGatewayAttachmentId' => '<string>',
        'TransitGatewayMulticastDomainId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AcceptTransitGatewayPeeringAttachment

$result = $client->acceptTransitGatewayPeeringAttachment([/* ... */]);
$promise = $client->acceptTransitGatewayPeeringAttachmentAsync([/* ... */]);

Accepts a transit gateway peering attachment request. The peering attachment must be in the pendingAcceptance state.

Parameter Syntax

$result = $client->acceptTransitGatewayPeeringAttachment([
    'DryRun' => true || false,
    'TransitGatewayAttachmentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'TransitGatewayPeeringAttachment' => [
        'AccepterTgwInfo' => [
            'CoreNetworkId' => '<string>',
            'OwnerId' => '<string>',
            'Region' => '<string>',
            'TransitGatewayId' => '<string>',
        ],
        'AccepterTransitGatewayAttachmentId' => '<string>',
        'CreationTime' => <DateTime>,
        'Options' => [
            'DynamicRouting' => 'enable|disable',
        ],
        'RequesterTgwInfo' => [
            'CoreNetworkId' => '<string>',
            'OwnerId' => '<string>',
            'Region' => '<string>',
            'TransitGatewayId' => '<string>',
        ],
        'State' => 'initiating|initiatingRequest|pendingAcceptance|rollingBack|pending|available|modifying|deleting|deleted|failed|rejected|rejecting|failing',
        'Status' => [
            'Code' => '<string>',
            'Message' => '<string>',
        ],
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'TransitGatewayAttachmentId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AcceptTransitGatewayVpcAttachment

$result = $client->acceptTransitGatewayVpcAttachment([/* ... */]);
$promise = $client->acceptTransitGatewayVpcAttachmentAsync([/* ... */]);

Accepts a request to attach a VPC to a transit gateway.

The VPC attachment must be in the pendingAcceptance state. Use DescribeTransitGatewayVpcAttachments to view your pending VPC attachment requests. Use RejectTransitGatewayVpcAttachment to reject a VPC attachment request.

Parameter Syntax

$result = $client->acceptTransitGatewayVpcAttachment([
    'DryRun' => true || false,
    'TransitGatewayAttachmentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'TransitGatewayVpcAttachment' => [
        'CreationTime' => <DateTime>,
        'Options' => [
            'ApplianceModeSupport' => 'enable|disable',
            'DnsSupport' => 'enable|disable',
            'Ipv6Support' => 'enable|disable',
            'SecurityGroupReferencingSupport' => 'enable|disable',
        ],
        'State' => 'initiating|initiatingRequest|pendingAcceptance|rollingBack|pending|available|modifying|deleting|deleted|failed|rejected|rejecting|failing',
        'SubnetIds' => ['<string>', ...],
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'TransitGatewayAttachmentId' => '<string>',
        'TransitGatewayId' => '<string>',
        'VpcId' => '<string>',
        'VpcOwnerId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AcceptVpcEndpointConnections

$result = $client->acceptVpcEndpointConnections([/* ... */]);
$promise = $client->acceptVpcEndpointConnectionsAsync([/* ... */]);

Accepts connection requests to your VPC endpoint service.

Parameter Syntax

$result = $client->acceptVpcEndpointConnections([
    'DryRun' => true || false,
    'ServiceId' => '<string>', // REQUIRED
    'VpcEndpointIds' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Unsuccessful' => [
        [
            'Error' => [
                'Code' => '<string>',
                'Message' => '<string>',
            ],
            'ResourceId' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

AcceptVpcPeeringConnection

$result = $client->acceptVpcPeeringConnection([/* ... */]);
$promise = $client->acceptVpcPeeringConnectionAsync([/* ... */]);

Accept a VPC peering connection request. To accept a request, the VPC peering connection must be in the pending-acceptance state, and you must be the owner of the peer VPC. Use DescribeVpcPeeringConnections to view your outstanding VPC peering connection requests.

For an inter-Region VPC peering connection request, you must accept the VPC peering connection in the Region of the accepter VPC.

Parameter Syntax

$result = $client->acceptVpcPeeringConnection([
    'DryRun' => true || false,
    'VpcPeeringConnectionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'VpcPeeringConnection' => [
        'AccepterVpcInfo' => [
            'CidrBlock' => '<string>',
            'CidrBlockSet' => [
                [
                    'CidrBlock' => '<string>',
                ],
                // ...
            ],
            'Ipv6CidrBlockSet' => [
                [
                    'Ipv6CidrBlock' => '<string>',
                ],
                // ...
            ],
            'OwnerId' => '<string>',
            'PeeringOptions' => [
                'AllowDnsResolutionFromRemoteVpc' => true || false,
                'AllowEgressFromLocalClassicLinkToRemoteVpc' => true || false,
                'AllowEgressFromLocalVpcToRemoteClassicLink' => true || false,
            ],
            'Region' => '<string>',
            'VpcId' => '<string>',
        ],
        'ExpirationTime' => <DateTime>,
        'RequesterVpcInfo' => [
            'CidrBlock' => '<string>',
            'CidrBlockSet' => [
                [
                    'CidrBlock' => '<string>',
                ],
                // ...
            ],
            'Ipv6CidrBlockSet' => [
                [
                    'Ipv6CidrBlock' => '<string>',
                ],
                // ...
            ],
            'OwnerId' => '<string>',
            'PeeringOptions' => [
                'AllowDnsResolutionFromRemoteVpc' => true || false,
                'AllowEgressFromLocalClassicLinkToRemoteVpc' => true || false,
                'AllowEgressFromLocalVpcToRemoteClassicLink' => true || false,
            ],
            'Region' => '<string>',
            'VpcId' => '<string>',
        ],
        'Status' => [
            'Code' => 'initiating-request|pending-acceptance|active|deleted|rejected|failed|expired|provisioning|deleting',
            'Message' => '<string>',
        ],
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcPeeringConnectionId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AdvertiseByoipCidr

$result = $client->advertiseByoipCidr([/* ... */]);
$promise = $client->advertiseByoipCidrAsync([/* ... */]);

Advertises an IPv4 or IPv6 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP).

You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

We recommend that you stop advertising the BYOIP CIDR from other locations when you advertise it from Amazon Web Services. To minimize down time, you can configure your Amazon Web Services resources to use an address from a BYOIP CIDR before it is advertised, and then simultaneously stop advertising it from the current location and start advertising it through Amazon Web Services.

It can take a few minutes before traffic to the specified addresses starts routing to Amazon Web Services because of BGP propagation delays.

To stop advertising the BYOIP CIDR, use WithdrawByoipCidr.

Parameter Syntax

$result = $client->advertiseByoipCidr([
    'Asn' => '<string>',
    'Cidr' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'NetworkBorderGroup' => '<string>',
]);

Parameter Details

Result Syntax

[
    'ByoipCidr' => [
        'AsnAssociations' => [
            [
                'Asn' => '<string>',
                'Cidr' => '<string>',
                'State' => 'disassociated|failed-disassociation|failed-association|pending-disassociation|pending-association|associated',
                'StatusMessage' => '<string>',
            ],
            // ...
        ],
        'Cidr' => '<string>',
        'Description' => '<string>',
        'NetworkBorderGroup' => '<string>',
        'State' => 'advertised|deprovisioned|failed-deprovision|failed-provision|pending-deprovision|pending-provision|provisioned|provisioned-not-publicly-advertisable',
        'StatusMessage' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AllocateAddress

$result = $client->allocateAddress([/* ... */]);
$promise = $client->allocateAddressAsync([/* ... */]);

Allocates an Elastic IP address to your Amazon Web Services account. After you allocate the Elastic IP address you can associate it with an instance or network interface. After you release an Elastic IP address, it is released to the IP address pool and can be allocated to a different Amazon Web Services account.

You can allocate an Elastic IP address from an address pool owned by Amazon Web Services or from an address pool created from a public IPv4 address range that you have brought to Amazon Web Services for use with your Amazon Web Services resources using bring your own IP addresses (BYOIP). For more information, see Bring Your Own IP Addresses (BYOIP) in the Amazon EC2 User Guide.

If you release an Elastic IP address, you might be able to recover it. You cannot recover an Elastic IP address that you released after it is allocated to another Amazon Web Services account. To attempt to recover an Elastic IP address that you released, specify it in this operation.

For more information, see Elastic IP Addresses in the Amazon EC2 User Guide.

You can allocate a carrier IP address which is a public IP address from a telecommunication carrier, to a network interface which resides in a subnet in a Wavelength Zone (for example an EC2 instance).

Parameter Syntax

$result = $client->allocateAddress([
    'Address' => '<string>',
    'CustomerOwnedIpv4Pool' => '<string>',
    'Domain' => 'vpc|standard',
    'DryRun' => true || false,
    'IpamPoolId' => '<string>',
    'NetworkBorderGroup' => '<string>',
    'PublicIpv4Pool' => '<string>',
    'TagSpecifications' => [
        [
            'ResourceType' => 'capacity-reservation|client-vpn-endpoint|customer-gateway|carrier-gateway|coip-pool|dedicated-host|dhcp-options|egress-only-internet-gateway|elastic-ip|elastic-gpu|export-image-task|export-instance-task|fleet|fpga-image|host-reservation|image|import-image-task|import-snapshot-task|instance|instance-event-window|internet-gateway|ipam|ipam-pool|ipam-scope|ipv4pool-ec2|ipv6pool-ec2|key-pair|launch-template|local-gateway|local-gateway-route-table|local-gateway-virtual-interface|local-gateway-virtual-interface-group|local-gateway-route-table-vpc-association|local-gateway-route-table-virtual-interface-group-association|natgateway|network-acl|network-interface|network-insights-analysis|network-insights-path|network-insights-access-scope|network-insights-access-scope-analysis|placement-group|prefix-list|replace-root-volume-task|reserved-instances|route-table|security-group|security-group-rule|snapshot|spot-fleet-request|spot-instances-request|subnet|subnet-cidr-reservation|traffic-mirror-filter|traffic-mirror-session|traffic-mirror-target|transit-gateway|transit-gateway-attachment|transit-gateway-connect-peer|transit-gateway-multicast-domain|transit-gateway-policy-table|transit-gateway-route-table|transit-gateway-route-table-announcement|volume|vpc|vpc-endpoint|vpc-endpoint-connection|vpc-endpoint-service|vpc-endpoint-service-permission|vpc-peering-connection|vpn-connection|vpn-gateway|vpc-flow-log|capacity-reservation-fleet|traffic-mirror-filter-rule|vpc-endpoint-connection-device-type|verified-access-instance|verified-access-group|verified-access-endpoint|verified-access-policy|verified-access-trust-provider|vpn-connection-device-type|vpc-block-public-access-exclusion|ipam-resource-discovery|ipam-resource-discovery-association|instance-connect-endpoint|ipam-external-resource-verification-token',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[
    'AllocationId' => '<string>',
    'CarrierIp' => '<string>',
    'CustomerOwnedIp' => '<string>',
    'CustomerOwnedIpv4Pool' => '<string>',
    'Domain' => 'vpc|standard',
    'NetworkBorderGroup' => '<string>',
    'PublicIp' => '<string>',
    'PublicIpv4Pool' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To allocate an Elastic IP address

This example allocates an Elastic IP address.

$result = $client->allocateAddress([
]);

Result syntax:

[
    'AllocationId' => 'eipalloc-64d5890a',
    'Domain' => 'vpc',
    'NetworkBorderGroup' => 'us-east-1',
    'PublicIp' => '203.0.113.0',
    'PublicIpv4Pool' => 'amazon',
]

AllocateHosts

$result = $client->allocateHosts([/* ... */]);
$promise = $client->allocateHostsAsync([/* ... */]);

Allocates a Dedicated Host to your account. At a minimum, specify the supported instance type or instance family, the Availability Zone in which to allocate the host, and the number of hosts to allocate.

Parameter Syntax

$result = $client->allocateHosts([
    'AssetIds' => ['<string>', ...],
    'AutoPlacement' => 'on|off',
    'AvailabilityZone' => '<string>', // REQUIRED
    'ClientToken' => '<string>',
    'HostMaintenance' => 'on|off',
    'HostRecovery' => 'on|off',
    'InstanceFamily' => '<string>',
    'InstanceType' => '<string>',
    'OutpostArn' => '<string>',
    'Quantity' => <integer>,
    'TagSpecifications' => [
        [
            'ResourceType' => 'capacity-reservation|client-vpn-endpoint|customer-gateway|carrier-gateway|coip-pool|dedicated-host|dhcp-options|egress-only-internet-gateway|elastic-ip|elastic-gpu|export-image-task|export-instance-task|fleet|fpga-image|host-reservation|image|import-image-task|import-snapshot-task|instance|instance-event-window|internet-gateway|ipam|ipam-pool|ipam-scope|ipv4pool-ec2|ipv6pool-ec2|key-pair|launch-template|local-gateway|local-gateway-route-table|local-gateway-virtual-interface|local-gateway-virtual-interface-group|local-gateway-route-table-vpc-association|local-gateway-route-table-virtual-interface-group-association|natgateway|network-acl|network-interface|network-insights-analysis|network-insights-path|network-insights-access-scope|network-insights-access-scope-analysis|placement-group|prefix-list|replace-root-volume-task|reserved-instances|route-table|security-group|security-group-rule|snapshot|spot-fleet-request|spot-instances-request|subnet|subnet-cidr-reservation|traffic-mirror-filter|traffic-mirror-session|traffic-mirror-target|transit-gateway|transit-gateway-attachment|transit-gateway-connect-peer|transit-gateway-multicast-domain|transit-gateway-policy-table|transit-gateway-route-table|transit-gateway-route-table-announcement|volume|vpc|vpc-endpoint|vpc-endpoint-connection|vpc-endpoint-service|vpc-endpoint-service-permission|vpc-peering-connection|vpn-connection|vpn-gateway|vpc-flow-log|capacity-reservation-fleet|traffic-mirror-filter-rule|vpc-endpoint-connection-device-type|verified-access-instance|verified-access-group|verified-access-endpoint|verified-access-policy|verified-access-trust-provider|vpn-connection-device-type|vpc-block-public-access-exclusion|ipam-resource-discovery|ipam-resource-discovery-association|instance-connect-endpoint|ipam-external-resource-verification-token',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[
    'HostIds' => ['<string>', ...],
]

Result Details

Errors

There are no errors described for this operation.

AllocateIpamPoolCidr

$result = $client->allocateIpamPoolCidr([/* ... */]);
$promise = $client->allocateIpamPoolCidrAsync([/* ... */]);

Allocate a CIDR from an IPAM pool. The Region you use should be the IPAM pool locale. The locale is the Amazon Web Services Region where this IPAM pool is available for allocations.

In IPAM, an allocation is a CIDR assignment from an IPAM pool to another IPAM pool or to a resource. For more information, see Allocate CIDRs in the Amazon VPC IPAM User Guide.

Parameter Syntax

$result = $client->allocateIpamPoolCidr([
    'AllowedCidrs' => ['<string>', ...],
    'Cidr' => '<string>',
    'ClientToken' => '<string>',
    'Description' => '<string>',
    'DisallowedCidrs' => ['<string>', ...],
    'DryRun' => true || false,
    'IpamPoolId' => '<string>', // REQUIRED
    'NetmaskLength' => <integer>,
    'PreviewNextCidr' => true || false,
]);

Parameter Details

Result Syntax

[
    'IpamPoolAllocation' => [
        'Cidr' => '<string>',
        'Description' => '<string>',
        'IpamPoolAllocationId' => '<string>',
        'ResourceId' => '<string>',
        'ResourceOwner' => '<string>',
        'ResourceRegion' => '<string>',
        'ResourceType' => 'ipam-pool|vpc|ec2-public-ipv4-pool|custom|subnet|eip',
    ],
]

Result Details

Errors

There are no errors described for this operation.

ApplySecurityGroupsToClientVpnTargetNetwork

$result = $client->applySecurityGroupsToClientVpnTargetNetwork([/* ... */]);
$promise = $client->applySecurityGroupsToClientVpnTargetNetworkAsync([/* ... */]);

Applies a security group to the association between the target network and the Client VPN endpoint. This action replaces the existing security groups with the specified security groups.

Parameter Syntax

$result = $client->applySecurityGroupsToClientVpnTargetNetwork([
    'ClientVpnEndpointId' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'SecurityGroupIds' => ['<string>', ...], // REQUIRED
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'SecurityGroupIds' => ['<string>', ...],
]

Result Details

Errors

There are no errors described for this operation.

AssignIpv6Addresses

$result = $client->assignIpv6Addresses([/* ... */]);
$promise = $client->assignIpv6AddressesAsync([/* ... */]);

Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type.

You must specify either the IPv6 addresses or the IPv6 address count in the request.

You can optionally use Prefix Delegation on the network interface. You must specify either the IPV6 Prefix Delegation prefixes, or the IPv6 Prefix Delegation count. For information, see Assigning prefixes to network interfaces in the Amazon EC2 User Guide.

Parameter Syntax

$result = $client->assignIpv6Addresses([
    'Ipv6AddressCount' => <integer>,
    'Ipv6Addresses' => ['<string>', ...],
    'Ipv6PrefixCount' => <integer>,
    'Ipv6Prefixes' => ['<string>', ...],
    'NetworkInterfaceId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'AssignedIpv6Addresses' => ['<string>', ...],
    'AssignedIpv6Prefixes' => ['<string>', ...],
    'NetworkInterfaceId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AssignPrivateIpAddresses

$result = $client->assignPrivateIpAddresses([/* ... */]);
$promise = $client->assignPrivateIpAddressesAsync([/* ... */]);

Assigns one or more secondary private IP addresses to the specified network interface.

You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon EC2 User Guide.

When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved.

Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete.

You must specify either the IP addresses or the IP address count in the request.

You can optionally use Prefix Delegation on the network interface. You must specify either the IPv4 Prefix Delegation prefixes, or the IPv4 Prefix Delegation count. For information, see Assigning prefixes to network interfaces in the Amazon EC2 User Guide.

Parameter Syntax

$result = $client->assignPrivateIpAddresses([
    'AllowReassignment' => true || false,
    'Ipv4PrefixCount' => <integer>,
    'Ipv4Prefixes' => ['<string>', ...],
    'NetworkInterfaceId' => '<string>', // REQUIRED
    'PrivateIpAddresses' => ['<string>', ...],
    'SecondaryPrivateIpAddressCount' => <integer>,
]);

Parameter Details

Result Syntax

[
    'AssignedIpv4Prefixes' => [
        [
            'Ipv4Prefix' => '<string>',
        ],
        // ...
    ],
    'AssignedPrivateIpAddresses' => [
        [
            'PrivateIpAddress' => '<string>',
        ],
        // ...
    ],
    'NetworkInterfaceId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To assign a specific secondary private IP address to an interface

This example assigns the specified secondary private IP address to the specified network interface.

$result = $client->assignPrivateIpAddresses([
    'NetworkInterfaceId' => 'eni-e5aa89a3',
    'PrivateIpAddresses' => [
        '10.0.0.82',
    ],
]);

Example 2: To assign secondary private IP addresses that Amazon EC2 selects to an interface

This example assigns two secondary private IP addresses to the specified network interface. Amazon EC2 automatically assigns these IP addresses from the available IP addresses in the CIDR block range of the subnet the network interface is associated with.

$result = $client->assignPrivateIpAddresses([
    'NetworkInterfaceId' => 'eni-e5aa89a3',
    'SecondaryPrivateIpAddressCount' => 2,
]);

AssignPrivateNatGatewayAddress

$result = $client->assignPrivateNatGatewayAddress([/* ... */]);
$promise = $client->assignPrivateNatGatewayAddressAsync([/* ... */]);

Assigns private IPv4 addresses to a private NAT gateway. For more information, see Work with NAT gateways in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->assignPrivateNatGatewayAddress([
    'DryRun' => true || false,
    'NatGatewayId' => '<string>', // REQUIRED
    'PrivateIpAddressCount' => <integer>,
    'PrivateIpAddresses' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'NatGatewayAddresses' => [
        [
            'AllocationId' => '<string>',
            'AssociationId' => '<string>',
            'FailureMessage' => '<string>',
            'IsPrimary' => true || false,
            'NetworkInterfaceId' => '<string>',
            'PrivateIp' => '<string>',
            'PublicIp' => '<string>',
            'Status' => 'assigning|unassigning|associating|disassociating|succeeded|failed',
        ],
        // ...
    ],
    'NatGatewayId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AssociateAddress

$result = $client->associateAddress([/* ... */]);
$promise = $client->associateAddressAsync([/* ... */]);

Associates an Elastic IP address, or carrier IP address (for instances that are in subnets in Wavelength Zones) with an instance or a network interface. Before you can use an Elastic IP address, you must allocate it to your account.

If the Elastic IP address is already associated with a different instance, it is disassociated from that instance and associated with the specified instance. If you associate an Elastic IP address with an instance that has an existing Elastic IP address, the existing address is disassociated from the instance, but remains allocated to your account.

[Subnets in Wavelength Zones] You can associate an IP address from the telecommunication carrier to the instance or network interface.

You cannot associate an Elastic IP address with an interface in a different network border group.

Parameter Syntax

$result = $client->associateAddress([
    'AllocationId' => '<string>',
    'AllowReassociation' => true || false,
    'DryRun' => true || false,
    'InstanceId' => '<string>',
    'NetworkInterfaceId' => '<string>',
    'PrivateIpAddress' => '<string>',
    'PublicIp' => '<string>',
]);

Parameter Details

Result Syntax

[
    'AssociationId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To associate an Elastic IP address

This example associates the specified Elastic IP address with the specified instance.

$result = $client->associateAddress([
    'AllocationId' => 'eipalloc-64d5890a',
    'InstanceId' => 'i-0b263919b6498b123',
]);

Result syntax:

[
    'AssociationId' => 'eipassoc-2bebb745',
]

Example 2: To associate an Elastic IP address with a network interface

This example associates the specified Elastic IP address with the specified network interface.

$result = $client->associateAddress([
    'AllocationId' => 'eipalloc-64d5890a',
    'NetworkInterfaceId' => 'eni-1a2b3c4d',
]);

Result syntax:

[
    'AssociationId' => 'eipassoc-2bebb745',
]

AssociateCapacityReservationBillingOwner

$result = $client->associateCapacityReservationBillingOwner([/* ... */]);
$promise = $client->associateCapacityReservationBillingOwnerAsync([/* ... */]);

Initiates a request to assign billing of the unused capacity of a shared Capacity Reservation to a consumer account that is consolidated under the same Amazon Web Services organizations payer account. For more information, see Billing assignment for shared Amazon EC2 Capacity Reservations.

Parameter Syntax

$result = $client->associateCapacityReservationBillingOwner([
    'CapacityReservationId' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'UnusedReservationBillingOwnerId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Return' => true || false,
]

Result Details

Errors

There are no errors described for this operation.

AssociateClientVpnTargetNetwork

$result = $client->associateClientVpnTargetNetwork([/* ... */]);
$promise = $client->associateClientVpnTargetNetworkAsync([/* ... */]);

Associates a target network with a Client VPN endpoint. A target network is a subnet in a VPC. You can associate multiple subnets from the same VPC with a Client VPN endpoint. You can associate only one subnet in each Availability Zone. We recommend that you associate at least two subnets to provide Availability Zone redundancy.

If you specified a VPC when you created the Client VPN endpoint or if you have previous subnet associations, the specified subnet must be in the same VPC. To specify a subnet that's in a different VPC, you must first modify the Client VPN endpoint (ModifyClientVpnEndpoint) and change the VPC that's associated with it.

Parameter Syntax

$result = $client->associateClientVpnTargetNetwork([
    'ClientToken' => '<string>',
    'ClientVpnEndpointId' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'SubnetId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'AssociationId' => '<string>',
    'Status' => [
        'Code' => 'associating|associated|association-failed|disassociating|disassociated',
        'Message' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateDhcpOptions

$result = $client->associateDhcpOptions([/* ... */]);
$promise = $client->associateDhcpOptionsAsync([/* ... */]);

Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC.

After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance.

For more information, see DHCP option sets in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->associateDhcpOptions([
    'DhcpOptionsId' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To associate a DHCP options set with a VPC

This example associates the specified DHCP options set with the specified VPC.

$result = $client->associateDhcpOptions([
    'DhcpOptionsId' => 'dopt-d9070ebb',
    'VpcId' => 'vpc-a01106c2',
]);

Example 2: To associate the default DHCP options set with a VPC

This example associates the default DHCP options set with the specified VPC.

$result = $client->associateDhcpOptions([
    'DhcpOptionsId' => 'default',
    'VpcId' => 'vpc-a01106c2',
]);

AssociateEnclaveCertificateIamRole

$result = $client->associateEnclaveCertificateIamRole([/* ... */]);
$promise = $client->associateEnclaveCertificateIamRoleAsync([/* ... */]);

Associates an Identity and Access Management (IAM) role with an Certificate Manager (ACM) certificate. This enables the certificate to be used by the ACM for Nitro Enclaves application inside an enclave. For more information, see Certificate Manager for Nitro Enclaves in the Amazon Web Services Nitro Enclaves User Guide.

When the IAM role is associated with the ACM certificate, the certificate, certificate chain, and encrypted private key are placed in an Amazon S3 location that only the associated IAM role can access. The private key of the certificate is encrypted with an Amazon Web Services managed key that has an attached attestation-based key policy.

To enable the IAM role to access the Amazon S3 object, you must grant it permission to call s3:GetObject on the Amazon S3 bucket returned by the command. To enable the IAM role to access the KMS key, you must grant it permission to call kms:Decrypt on the KMS key returned by the command. For more information, see Grant the role permission to access the certificate and encryption key in the Amazon Web Services Nitro Enclaves User Guide.

Parameter Syntax

$result = $client->associateEnclaveCertificateIamRole([
    'CertificateArn' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'RoleArn' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'CertificateS3BucketName' => '<string>',
    'CertificateS3ObjectKey' => '<string>',
    'EncryptionKmsKeyId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AssociateIamInstanceProfile

$result = $client->associateIamInstanceProfile([/* ... */]);
$promise = $client->associateIamInstanceProfileAsync([/* ... */]);

Associates an IAM instance profile with a running or stopped instance. You cannot associate more than one IAM instance profile with an instance.

Parameter Syntax

$result = $client->associateIamInstanceProfile([
    'IamInstanceProfile' => [ // REQUIRED
        'Arn' => '<string>',
        'Name' => '<string>',
    ],
    'InstanceId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'IamInstanceProfileAssociation' => [
        'AssociationId' => '<string>',
        'IamInstanceProfile' => [
            'Arn' => '<string>',
            'Id' => '<string>',
        ],
        'InstanceId' => '<string>',
        'State' => 'associating|associated|disassociating|disassociated',
        'Timestamp' => <DateTime>,
    ],
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To associate an IAM instance profile with an instance

This example associates an IAM instance profile named admin-role with the specified instance.

$result = $client->associateIamInstanceProfile([
    'IamInstanceProfile' => [
        'Name' => 'admin-role',
    ],
    'InstanceId' => 'i-123456789abcde123',
]);

Result syntax:

[
    'IamInstanceProfileAssociation' => [
        'AssociationId' => 'iip-assoc-0e7736511a163c209',
        'IamInstanceProfile' => [
            'Arn' => 'arn:aws:iam::123456789012:instance-profile/admin-role',
            'Id' => 'AIPAJBLK7RKJKWDXVHIEC',
        ],
        'InstanceId' => 'i-123456789abcde123',
        'State' => 'associating',
    ],
]

AssociateInstanceEventWindow

$result = $client->associateInstanceEventWindow([/* ... */]);
$promise = $client->associateInstanceEventWindowAsync([/* ... */]);

Associates one or more targets with an event window. Only one type of target (instance IDs, Dedicated Host IDs, or tags) can be specified with an event window.

For more information, see Define event windows for scheduled events in the Amazon EC2 User Guide.

Parameter Syntax

$result = $client->associateInstanceEventWindow([
    'AssociationTarget' => [ // REQUIRED
        'DedicatedHostIds' => ['<string>', ...],
        'InstanceIds' => ['<string>', ...],
        'InstanceTags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
    ],
    'DryRun' => true || false,
    'InstanceEventWindowId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'InstanceEventWindow' => [
        'AssociationTarget' => [
            'DedicatedHostIds' => ['<string>', ...],
            'InstanceIds' => ['<string>', ...],
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
        ],
        'CronExpression' => '<string>',
        'InstanceEventWindowId' => '<string>',
        'Name' => '<string>',
        'State' => 'creating|deleting|active|deleted',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'TimeRanges' => [
            [
                'EndHour' => <integer>,
                'EndWeekDay' => 'sunday|monday|tuesday|wednesday|thursday|friday|saturday',
                'StartHour' => <integer>,
                'StartWeekDay' => 'sunday|monday|tuesday|wednesday|thursday|friday|saturday',
            ],
            // ...
        ],
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateIpamByoasn

$result = $client->associateIpamByoasn([/* ... */]);
$promise = $client->associateIpamByoasnAsync([/* ... */]);

Associates your Autonomous System Number (ASN) with a BYOIP CIDR that you own in the same Amazon Web Services Region. For more information, see Tutorial: Bring your ASN to IPAM in the Amazon VPC IPAM guide.

After the association succeeds, the ASN is eligible for advertisement. You can view the association with DescribeByoipCidrs. You can advertise the CIDR with AdvertiseByoipCidr.

Parameter Syntax

$result = $client->associateIpamByoasn([
    'Asn' => '<string>', // REQUIRED
    'Cidr' => '<string>', // REQUIRED
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[
    'AsnAssociation' => [
        'Asn' => '<string>',
        'Cidr' => '<string>',
        'State' => 'disassociated|failed-disassociation|failed-association|pending-disassociation|pending-association|associated',
        'StatusMessage' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateIpamResourceDiscovery

$result = $client->associateIpamResourceDiscovery([/* ... */]);
$promise = $client->associateIpamResourceDiscoveryAsync([/* ... */]);

Associates an IPAM resource discovery with an Amazon VPC IPAM. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Parameter Syntax

$result = $client->associateIpamResourceDiscovery([
    'ClientToken' => '<string>',
    'DryRun' => true || false,
    'IpamId' => '<string>', // REQUIRED
    'IpamResourceDiscoveryId' => '<string>', // REQUIRED
    'TagSpecifications' => [
        [
            'ResourceType' => 'capacity-reservation|client-vpn-endpoint|customer-gateway|carrier-gateway|coip-pool|dedicated-host|dhcp-options|egress-only-internet-gateway|elastic-ip|elastic-gpu|export-image-task|export-instance-task|fleet|fpga-image|host-reservation|image|import-image-task|import-snapshot-task|instance|instance-event-window|internet-gateway|ipam|ipam-pool|ipam-scope|ipv4pool-ec2|ipv6pool-ec2|key-pair|launch-template|local-gateway|local-gateway-route-table|local-gateway-virtual-interface|local-gateway-virtual-interface-group|local-gateway-route-table-vpc-association|local-gateway-route-table-virtual-interface-group-association|natgateway|network-acl|network-interface|network-insights-analysis|network-insights-path|network-insights-access-scope|network-insights-access-scope-analysis|placement-group|prefix-list|replace-root-volume-task|reserved-instances|route-table|security-group|security-group-rule|snapshot|spot-fleet-request|spot-instances-request|subnet|subnet-cidr-reservation|traffic-mirror-filter|traffic-mirror-session|traffic-mirror-target|transit-gateway|transit-gateway-attachment|transit-gateway-connect-peer|transit-gateway-multicast-domain|transit-gateway-policy-table|transit-gateway-route-table|transit-gateway-route-table-announcement|volume|vpc|vpc-endpoint|vpc-endpoint-connection|vpc-endpoint-service|vpc-endpoint-service-permission|vpc-peering-connection|vpn-connection|vpn-gateway|vpc-flow-log|capacity-reservation-fleet|traffic-mirror-filter-rule|vpc-endpoint-connection-device-type|verified-access-instance|verified-access-group|verified-access-endpoint|verified-access-policy|verified-access-trust-provider|vpn-connection-device-type|vpc-block-public-access-exclusion|ipam-resource-discovery|ipam-resource-discovery-association|instance-connect-endpoint|ipam-external-resource-verification-token',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[
    'IpamResourceDiscoveryAssociation' => [
        'IpamArn' => '<string>',
        'IpamId' => '<string>',
        'IpamRegion' => '<string>',
        'IpamResourceDiscoveryAssociationArn' => '<string>',
        'IpamResourceDiscoveryAssociationId' => '<string>',
        'IpamResourceDiscoveryId' => '<string>',
        'IsDefault' => true || false,
        'OwnerId' => '<string>',
        'ResourceDiscoveryStatus' => 'active|not-found',
        'State' => 'associate-in-progress|associate-complete|associate-failed|disassociate-in-progress|disassociate-complete|disassociate-failed|isolate-in-progress|isolate-complete|restore-in-progress',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateNatGatewayAddress

$result = $client->associateNatGatewayAddress([/* ... */]);
$promise = $client->associateNatGatewayAddressAsync([/* ... */]);

Associates Elastic IP addresses (EIPs) and private IPv4 addresses with a public NAT gateway. For more information, see Work with NAT gateways in the Amazon VPC User Guide.

By default, you can associate up to 2 Elastic IP addresses per public NAT gateway. You can increase the limit by requesting a quota adjustment. For more information, see Elastic IP address quotas in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->associateNatGatewayAddress([
    'AllocationIds' => ['<string>', ...], // REQUIRED
    'DryRun' => true || false,
    'NatGatewayId' => '<string>', // REQUIRED
    'PrivateIpAddresses' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'NatGatewayAddresses' => [
        [
            'AllocationId' => '<string>',
            'AssociationId' => '<string>',
            'FailureMessage' => '<string>',
            'IsPrimary' => true || false,
            'NetworkInterfaceId' => '<string>',
            'PrivateIp' => '<string>',
            'PublicIp' => '<string>',
            'Status' => 'assigning|unassigning|associating|disassociating|succeeded|failed',
        ],
        // ...
    ],
    'NatGatewayId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AssociateRouteTable

$result = $client->associateRouteTable([/* ... */]);
$promise = $client->associateRouteTableAsync([/* ... */]);

Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets.

For more information, see Route tables in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->associateRouteTable([
    'DryRun' => true || false,
    'GatewayId' => '<string>',
    'RouteTableId' => '<string>', // REQUIRED
    'SubnetId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'AssociationId' => '<string>',
    'AssociationState' => [
        'State' => 'associating|associated|disassociating|disassociated|failed',
        'StatusMessage' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To associate a route table with a subnet

This example associates the specified route table with the specified subnet.

$result = $client->associateRouteTable([
    'RouteTableId' => 'rtb-22574640',
    'SubnetId' => 'subnet-9d4a7b6',
]);

Result syntax:

[
    'AssociationId' => 'rtbassoc-781d0d1a',
]

AssociateSecurityGroupVpc

$result = $client->associateSecurityGroupVpc([/* ... */]);
$promise = $client->associateSecurityGroupVpcAsync([/* ... */]);

Associates a security group with another VPC in the same Region. This enables you to use the same security group with network interfaces and instances in the specified VPC.

Parameter Syntax

$result = $client->associateSecurityGroupVpc([
    'DryRun' => true || false,
    'GroupId' => '<string>', // REQUIRED
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'State' => 'associating|associated|association-failed|disassociating|disassociated|disassociation-failed',
]

Result Details

Errors

There are no errors described for this operation.

AssociateSubnetCidrBlock

$result = $client->associateSubnetCidrBlock([/* ... */]);
$promise = $client->associateSubnetCidrBlockAsync([/* ... */]);

Associates a CIDR block with your subnet. You can only associate a single IPv6 CIDR block with your subnet.

Parameter Syntax

$result = $client->associateSubnetCidrBlock([
    'Ipv6CidrBlock' => '<string>',
    'Ipv6IpamPoolId' => '<string>',
    'Ipv6NetmaskLength' => <integer>,
    'SubnetId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Ipv6CidrBlockAssociation' => [
        'AssociationId' => '<string>',
        'IpSource' => 'amazon|byoip|none',
        'Ipv6AddressAttribute' => 'public|private',
        'Ipv6CidrBlock' => '<string>',
        'Ipv6CidrBlockState' => [
            'State' => 'associating|associated|disassociating|disassociated|failing|failed',
            'StatusMessage' => '<string>',
        ],
    ],
    'SubnetId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AssociateTransitGatewayMulticastDomain

$result = $client->associateTransitGatewayMulticastDomain([/* ... */]);
$promise = $client->associateTransitGatewayMulticastDomainAsync([/* ... */]);

Associates the specified subnets and transit gateway attachments with the specified transit gateway multicast domain.

The transit gateway attachment must be in the available state before you can add a resource. Use DescribeTransitGatewayAttachments to see the state of the attachment.

Parameter Syntax

$result = $client->associateTransitGatewayMulticastDomain([
    'DryRun' => true || false,
    'SubnetIds' => ['<string>', ...], // REQUIRED
    'TransitGatewayAttachmentId' => '<string>', // REQUIRED
    'TransitGatewayMulticastDomainId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Associations' => [
        'ResourceId' => '<string>',
        'ResourceOwnerId' => '<string>',
        'ResourceType' => 'vpc|vpn|direct-connect-gateway|connect|peering|tgw-peering',
        'Subnets' => [
            [
                'State' => 'pendingAcceptance|associating|associated|disassociating|disassociated|rejected|failed',
                'SubnetId' => '<string>',
            ],
            // ...
        ],
        'TransitGatewayAttachmentId' => '<string>',
        'TransitGatewayMulticastDomainId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateTransitGatewayPolicyTable

$result = $client->associateTransitGatewayPolicyTable([/* ... */]);
$promise = $client->associateTransitGatewayPolicyTableAsync([/* ... */]);

Associates the specified transit gateway attachment with a transit gateway policy table.

Parameter Syntax

$result = $client->associateTransitGatewayPolicyTable([
    'DryRun' => true || false,
    'TransitGatewayAttachmentId' => '<string>', // REQUIRED
    'TransitGatewayPolicyTableId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Association' => [
        'ResourceId' => '<string>',
        'ResourceType' => 'vpc|vpn|direct-connect-gateway|connect|peering|tgw-peering',
        'State' => 'associating|associated|disassociating|disassociated',
        'TransitGatewayAttachmentId' => '<string>',
        'TransitGatewayPolicyTableId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateTransitGatewayRouteTable

$result = $client->associateTransitGatewayRouteTable([/* ... */]);
$promise = $client->associateTransitGatewayRouteTableAsync([/* ... */]);

Associates the specified attachment with the specified transit gateway route table. You can associate only one route table with an attachment.

Parameter Syntax

$result = $client->associateTransitGatewayRouteTable([
    'DryRun' => true || false,
    'TransitGatewayAttachmentId' => '<string>', // REQUIRED
    'TransitGatewayRouteTableId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Association' => [
        'ResourceId' => '<string>',
        'ResourceType' => 'vpc|vpn|direct-connect-gateway|connect|peering|tgw-peering',
        'State' => 'associating|associated|disassociating|disassociated',
        'TransitGatewayAttachmentId' => '<string>',
        'TransitGatewayRouteTableId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateTrunkInterface

$result = $client->associateTrunkInterface([/* ... */]);
$promise = $client->associateTrunkInterfaceAsync([/* ... */]);

Associates a branch network interface with a trunk network interface.

Before you create the association, use CreateNetworkInterface command and set the interface type to trunk. You must also create a network interface for each branch network interface that you want to associate with the trunk network interface.

Parameter Syntax

$result = $client->associateTrunkInterface([
    'BranchInterfaceId' => '<string>', // REQUIRED
    'ClientToken' => '<string>',
    'DryRun' => true || false,
    'GreKey' => <integer>,
    'TrunkInterfaceId' => '<string>', // REQUIRED
    'VlanId' => <integer>,
]);

Parameter Details

Result Syntax

[
    'ClientToken' => '<string>',
    'InterfaceAssociation' => [
        'AssociationId' => '<string>',
        'BranchInterfaceId' => '<string>',
        'GreKey' => <integer>,
        'InterfaceProtocol' => 'VLAN|GRE',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'TrunkInterfaceId' => '<string>',
        'VlanId' => <integer>,
    ],
]

Result Details

Errors

There are no errors described for this operation.

AssociateVpcCidrBlock

$result = $client->associateVpcCidrBlock([/* ... */]);
$promise = $client->associateVpcCidrBlockAsync([/* ... */]);

Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP).

You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block.

For more information about associating CIDR blocks with your VPC and applicable restrictions, see IP addressing for your VPCs and subnets in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->associateVpcCidrBlock([
    'AmazonProvidedIpv6CidrBlock' => true || false,
    'CidrBlock' => '<string>',
    'Ipv4IpamPoolId' => '<string>',
    'Ipv4NetmaskLength' => <integer>,
    'Ipv6CidrBlock' => '<string>',
    'Ipv6CidrBlockNetworkBorderGroup' => '<string>',
    'Ipv6IpamPoolId' => '<string>',
    'Ipv6NetmaskLength' => <integer>,
    'Ipv6Pool' => '<string>',
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'CidrBlockAssociation' => [
        'AssociationId' => '<string>',
        'CidrBlock' => '<string>',
        'CidrBlockState' => [
            'State' => 'associating|associated|disassociating|disassociated|failing|failed',
            'StatusMessage' => '<string>',
        ],
    ],
    'Ipv6CidrBlockAssociation' => [
        'AssociationId' => '<string>',
        'IpSource' => 'amazon|byoip|none',
        'Ipv6AddressAttribute' => 'public|private',
        'Ipv6CidrBlock' => '<string>',
        'Ipv6CidrBlockState' => [
            'State' => 'associating|associated|disassociating|disassociated|failing|failed',
            'StatusMessage' => '<string>',
        ],
        'Ipv6Pool' => '<string>',
        'NetworkBorderGroup' => '<string>',
    ],
    'VpcId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AttachClassicLinkVpc

$result = $client->attachClassicLinkVpc([/* ... */]);
$promise = $client->attachClassicLinkVpcAsync([/* ... */]);

This action is deprecated.

Links an EC2-Classic instance to a ClassicLink-enabled VPC through one or more of the VPC security groups. You cannot link an EC2-Classic instance to more than one VPC at a time. You can only link an instance that's in the running state. An instance is automatically unlinked from a VPC when it's stopped - you can link it to the VPC again when you restart it.

After you've linked an instance, you cannot change the VPC security groups that are associated with it. To change the security groups, you must first unlink the instance, and then link it again.

Linking your instance to a VPC is sometimes referred to as attaching your instance.

Parameter Syntax

$result = $client->attachClassicLinkVpc([
    'DryRun' => true || false,
    'Groups' => ['<string>', ...], // REQUIRED
    'InstanceId' => '<string>', // REQUIRED
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Return' => true || false,
]

Result Details

Errors

There are no errors described for this operation.

AttachInternetGateway

$result = $client->attachInternetGateway([/* ... */]);
$promise = $client->attachInternetGatewayAsync([/* ... */]);

Attaches an internet gateway or a virtual private gateway to a VPC, enabling connectivity between the internet and the VPC. For more information, see Internet gateways in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->attachInternetGateway([
    'DryRun' => true || false,
    'InternetGatewayId' => '<string>', // REQUIRED
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To attach an Internet gateway to a VPC

This example attaches the specified Internet gateway to the specified VPC.

$result = $client->attachInternetGateway([
    'InternetGatewayId' => 'igw-c0a643a9',
    'VpcId' => 'vpc-a01106c2',
]);

AttachNetworkInterface

$result = $client->attachNetworkInterface([/* ... */]);
$promise = $client->attachNetworkInterfaceAsync([/* ... */]);

Attaches a network interface to an instance.

Parameter Syntax

$result = $client->attachNetworkInterface([
    'DeviceIndex' => <integer>, // REQUIRED
    'DryRun' => true || false,
    'EnaSrdSpecification' => [
        'EnaSrdEnabled' => true || false,
        'EnaSrdUdpSpecification' => [
            'EnaSrdUdpEnabled' => true || false,
        ],
    ],
    'InstanceId' => '<string>', // REQUIRED
    'NetworkCardIndex' => <integer>,
    'NetworkInterfaceId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'AttachmentId' => '<string>',
    'NetworkCardIndex' => <integer>,
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To attach a network interface to an instance

This example attaches the specified network interface to the specified instance.

$result = $client->attachNetworkInterface([
    'DeviceIndex' => 1,
    'InstanceId' => 'i-1234567890abcdef0',
    'NetworkInterfaceId' => 'eni-e5aa89a3',
]);

Result syntax:

[
    'AttachmentId' => 'eni-attach-66c4350a',
]

AttachVerifiedAccessTrustProvider

$result = $client->attachVerifiedAccessTrustProvider([/* ... */]);
$promise = $client->attachVerifiedAccessTrustProviderAsync([/* ... */]);

Attaches the specified Amazon Web Services Verified Access trust provider to the specified Amazon Web Services Verified Access instance.

Parameter Syntax

$result = $client->attachVerifiedAccessTrustProvider([
    'ClientToken' => '<string>',
    'DryRun' => true || false,
    'VerifiedAccessInstanceId' => '<string>', // REQUIRED
    'VerifiedAccessTrustProviderId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'VerifiedAccessInstance' => [
        'CreationTime' => '<string>',
        'Description' => '<string>',
        'FipsEnabled' => true || false,
        'LastUpdatedTime' => '<string>',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VerifiedAccessInstanceId' => '<string>',
        'VerifiedAccessTrustProviders' => [
            [
                'Description' => '<string>',
                'DeviceTrustProviderType' => 'jamf|crowdstrike|jumpcloud',
                'TrustProviderType' => 'user|device',
                'UserTrustProviderType' => 'iam-identity-center|oidc',
                'VerifiedAccessTrustProviderId' => '<string>',
            ],
            // ...
        ],
    ],
    'VerifiedAccessTrustProvider' => [
        'CreationTime' => '<string>',
        'Description' => '<string>',
        'DeviceOptions' => [
            'PublicSigningKeyUrl' => '<string>',
            'TenantId' => '<string>',
        ],
        'DeviceTrustProviderType' => 'jamf|crowdstrike|jumpcloud',
        'LastUpdatedTime' => '<string>',
        'OidcOptions' => [
            'AuthorizationEndpoint' => '<string>',
            'ClientId' => '<string>',
            'ClientSecret' => '<string>',
            'Issuer' => '<string>',
            'Scope' => '<string>',
            'TokenEndpoint' => '<string>',
            'UserInfoEndpoint' => '<string>',
        ],
        'PolicyReferenceName' => '<string>',
        'SseSpecification' => [
            'CustomerManagedKeyEnabled' => true || false,
            'KmsKeyArn' => '<string>',
        ],
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'TrustProviderType' => 'user|device',
        'UserTrustProviderType' => 'iam-identity-center|oidc',
        'VerifiedAccessTrustProviderId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AttachVolume

$result = $client->attachVolume([/* ... */]);
$promise = $client->attachVolumeAsync([/* ... */]);

Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name.

Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon EBS User Guide.

After you attach an EBS volume, you must make it available. For more information, see Make an EBS volume available for use.

If a volume has an Amazon Web Services Marketplace product code:

• The volume can be attached only to a stopped instance.

• Amazon Web Services Marketplace product codes are copied from the volume to the instance.

• You must be subscribed to the product.

• The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.

For more information, see Attach an Amazon EBS volume to an instance in the Amazon EBS User Guide.

Parameter Syntax

$result = $client->attachVolume([
    'Device' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'InstanceId' => '<string>', // REQUIRED
    'VolumeId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'AssociatedResource' => '<string>',
    'AttachTime' => <DateTime>,
    'DeleteOnTermination' => true || false,
    'Device' => '<string>',
    'InstanceId' => '<string>',
    'InstanceOwningService' => '<string>',
    'State' => 'attaching|attached|detaching|detached|busy',
    'VolumeId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To attach a volume to an instance

This example attaches a volume (``vol-1234567890abcdef0``) to an instance (``i-01474ef662b89480``) as ``/dev/sdf``.

$result = $client->attachVolume([
    'Device' => '/dev/sdf',
    'InstanceId' => 'i-01474ef662b89480',
    'VolumeId' => 'vol-1234567890abcdef0',
]);

Result syntax:

[
    'AttachTime' => ,
    'Device' => '/dev/sdf',
    'InstanceId' => 'i-01474ef662b89480',
    'State' => 'attaching',
    'VolumeId' => 'vol-1234567890abcdef0',
]

AttachVpnGateway

$result = $client->attachVpnGateway([/* ... */]);
$promise = $client->attachVpnGatewayAsync([/* ... */]);

Attaches an available virtual private gateway to a VPC. You can attach one virtual private gateway to one VPC at a time.

For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

Parameter Syntax

$result = $client->attachVpnGateway([
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
    'VpnGatewayId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'VpcAttachment' => [
        'State' => 'attaching|attached|detaching|detached',
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AuthorizeClientVpnIngress

$result = $client->authorizeClientVpnIngress([/* ... */]);
$promise = $client->authorizeClientVpnIngressAsync([/* ... */]);

Adds an ingress authorization rule to a Client VPN endpoint. Ingress authorization rules act as firewall rules that grant access to networks. You must configure ingress authorization rules to enable clients to access resources in Amazon Web Services or on-premises networks.

Parameter Syntax

$result = $client->authorizeClientVpnIngress([
    'AccessGroupId' => '<string>',
    'AuthorizeAllGroups' => true || false,
    'ClientToken' => '<string>',
    'ClientVpnEndpointId' => '<string>', // REQUIRED
    'Description' => '<string>',
    'DryRun' => true || false,
    'TargetNetworkCidr' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Status' => [
        'Code' => 'authorizing|active|failed|revoking',
        'Message' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AuthorizeSecurityGroupEgress

$result = $client->authorizeSecurityGroupEgress([/* ... */]);
$promise = $client->authorizeSecurityGroupEgressAsync([/* ... */]);

Adds the specified outbound (egress) rules to a security group.

An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 address ranges, the IP address ranges specified by a prefix list, or the instances that are associated with a source security group. For more information, see Security group rules.

You must specify exactly one of the following destinations: an IPv4 or IPv6 address range, a prefix list, or a security group. You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP type and code.

Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide.

For information about security group quotas, see Amazon VPC quotas in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->authorizeSecurityGroupEgress([
    'CidrIp' => '<string>',
    'DryRun' => true || false,
    'FromPort' => <integer>,
    'GroupId' => '<string>', // REQUIRED
    'IpPermissions' => [
        [
            'FromPort' => <integer>,
            'IpProtocol' => '<string>',
            'IpRanges' => [
                [
                    'CidrIp' => '<string>',
                    'Description' => '<string>',
                ],
                // ...
            ],
            'Ipv6Ranges' => [
                [
                    'CidrIpv6' => '<string>',
                    'Description' => '<string>',
                ],
                // ...
            ],
            'PrefixListIds' => [
                [
                    'Description' => '<string>',
                    'PrefixListId' => '<string>',
                ],
                // ...
            ],
            'ToPort' => <integer>,
            'UserIdGroupPairs' => [
                [
                    'Description' => '<string>',
                    'GroupId' => '<string>',
                    'GroupName' => '<string>',
                    'PeeringStatus' => '<string>',
                    'UserId' => '<string>',
                    'VpcId' => '<string>',
                    'VpcPeeringConnectionId' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
    'IpProtocol' => '<string>',
    'SourceSecurityGroupName' => '<string>',
    'SourceSecurityGroupOwnerId' => '<string>',
    'TagSpecifications' => [
        [
            'ResourceType' => 'capacity-reservation|client-vpn-endpoint|customer-gateway|carrier-gateway|coip-pool|dedicated-host|dhcp-options|egress-only-internet-gateway|elastic-ip|elastic-gpu|export-image-task|export-instance-task|fleet|fpga-image|host-reservation|image|import-image-task|import-snapshot-task|instance|instance-event-window|internet-gateway|ipam|ipam-pool|ipam-scope|ipv4pool-ec2|ipv6pool-ec2|key-pair|launch-template|local-gateway|local-gateway-route-table|local-gateway-virtual-interface|local-gateway-virtual-interface-group|local-gateway-route-table-vpc-association|local-gateway-route-table-virtual-interface-group-association|natgateway|network-acl|network-interface|network-insights-analysis|network-insights-path|network-insights-access-scope|network-insights-access-scope-analysis|placement-group|prefix-list|replace-root-volume-task|reserved-instances|route-table|security-group|security-group-rule|snapshot|spot-fleet-request|spot-instances-request|subnet|subnet-cidr-reservation|traffic-mirror-filter|traffic-mirror-session|traffic-mirror-target|transit-gateway|transit-gateway-attachment|transit-gateway-connect-peer|transit-gateway-multicast-domain|transit-gateway-policy-table|transit-gateway-route-table|transit-gateway-route-table-announcement|volume|vpc|vpc-endpoint|vpc-endpoint-connection|vpc-endpoint-service|vpc-endpoint-service-permission|vpc-peering-connection|vpn-connection|vpn-gateway|vpc-flow-log|capacity-reservation-fleet|traffic-mirror-filter-rule|vpc-endpoint-connection-device-type|verified-access-instance|verified-access-group|verified-access-endpoint|verified-access-policy|verified-access-trust-provider|vpn-connection-device-type|vpc-block-public-access-exclusion|ipam-resource-discovery|ipam-resource-discovery-association|instance-connect-endpoint|ipam-external-resource-verification-token',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
    'ToPort' => <integer>,
]);

Parameter Details

Result Syntax

[
    'Return' => true || false,
    'SecurityGroupRules' => [
        [
            'CidrIpv4' => '<string>',
            'CidrIpv6' => '<string>',
            'Description' => '<string>',
            'FromPort' => <integer>,
            'GroupId' => '<string>',
            'GroupOwnerId' => '<string>',
            'IpProtocol' => '<string>',
            'IsEgress' => true || false,
            'PrefixListId' => '<string>',
            'ReferencedGroupInfo' => [
                'GroupId' => '<string>',
                'PeeringStatus' => '<string>',
                'UserId' => '<string>',
                'VpcId' => '<string>',
                'VpcPeeringConnectionId' => '<string>',
            ],
            'SecurityGroupRuleArn' => '<string>',
            'SecurityGroupRuleId' => '<string>',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
            'ToPort' => <integer>,
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

Examples

Example 1: To add a rule that allows outbound traffic to a specific address range

This example adds a rule that grants access to the specified address ranges on TCP port 80.

$result = $client->authorizeSecurityGroupEgress([
    'GroupId' => 'sg-1a2b3c4d',
    'IpPermissions' => [
        [
            'FromPort' => 80,
            'IpProtocol' => 'tcp',
            'IpRanges' => [
                [
                    'CidrIp' => '10.0.0.0/16',
                ],
            ],
            'ToPort' => 80,
        ],
    ],
]);

Result syntax:

[
]

Example 2: To add a rule that allows outbound traffic to a specific security group

This example adds a rule that grants access to the specified security group on TCP port 80.

$result = $client->authorizeSecurityGroupEgress([
    'GroupId' => 'sg-1a2b3c4d',
    'IpPermissions' => [
        [
            'FromPort' => 80,
            'IpProtocol' => 'tcp',
            'ToPort' => 80,
            'UserIdGroupPairs' => [
                [
                    'GroupId' => 'sg-4b51a32f',
                ],
            ],
        ],
    ],
]);

Result syntax:

[
]

AuthorizeSecurityGroupIngress

$result = $client->authorizeSecurityGroupIngress([/* ... */]);
$promise = $client->authorizeSecurityGroupIngressAsync([/* ... */]);

Adds the specified inbound (ingress) rules to a security group.

An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 address range, the IP address ranges that are specified by a prefix list, or the instances that are associated with a destination security group. For more information, see Security group rules.

You must specify exactly one of the following sources: an IPv4 or IPv6 address range, a prefix list, or a security group. You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP/ICMPv6 type and code.

Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide.

For more information about security group quotas, see Amazon VPC quotas in the Amazon VPC User Guide.

Parameter Syntax

$result = $client->authorizeSecurityGroupIngress([
    'CidrIp' => '<string>',
    'DryRun' => true || false,
    'FromPort' => <integer>,
    'GroupId' => '<string>',
    'GroupName' => '<string>',
    'IpPermissions' => [
        [
            'FromPort' => <integer>,
            'IpProtocol' => '<string>',
            'IpRanges' => [
                [
                    'CidrIp' => '<string>',
                    'Description' => '<string>',
                ],
                // ...
            ],
            'Ipv6Ranges' => [
                [
                    'CidrIpv6' => '<string>',
                    'Description' => '<string>',
                ],
                // ...
            ],
            'PrefixListIds' => [
                [
                    'Description' => '<string>',
                    'PrefixListId' => '<string>',
                ],
                // ...
            ],
            'ToPort' => <integer>,
            'UserIdGroupPairs' => [
                [
                    'Description' => '<string>',
                    'GroupId' => '<string>',
                    'GroupName' => '<string>',
                    'PeeringStatus' => '<string>',
                    'UserId' => '<string>',
                    'VpcId' => '<string>',
                    'VpcPeeringConnectionId' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
    'IpProtocol' => '<string>',
    'SourceSecurityGroupName' => '<string>',
    'SourceSecurityGroupOwnerId' => '<string>',
    'TagSpecifications' => [
        [
            'ResourceType' => 'capacity-reservation|client-vpn-endpoint|customer-gateway|carrier-gateway|coip-pool|dedicated-host|dhcp-options|egress-only-internet-gateway|elastic-ip|elastic-gpu|export-image-task|export-instance-task|fleet|fpga-image|host-reservation|image|import-image-task|import-snapshot-task|instance|instance-event-window|internet-gateway|ipam|ipam-pool|ipam-scope|ipv4pool-ec2|ipv6pool-ec2|key-pair|launch-template|local-gateway|local-gateway-route-table|local-gateway-virtual-interface|local-gateway-virtual-interface-group|local-gateway-route-table-vpc-association|local-gateway-route-table-virtual-interface-group-association|natgateway|network-acl|network-interface|network-insights-analysis|network-insights-path|network-insights-access-scope|network-insights-access-scope-analysis|placement-group|prefix-list|replace-root-volume-task|reserved-instances|route-table|security-group|security-group-rule|snapshot|spot-fleet-request|spot-instances-request|subnet|subnet-cidr-reservation|traffic-mirror-filter|traffic-mirror-session|traffic-mirror-target|transit-gateway|transit-gateway-attachment|transit-gateway-connect-peer|transit-gateway-multicast-domain|transit-gateway-policy-table|transit-gateway-route-table|transit-gateway-route-table-announcement|volume|vpc|vpc-endpoint|vpc-endpoint-connection|vpc-endpoint-service|vpc-endpoint-service-permission|vpc-peering-connection|vpn-connection|vpn-gateway|vpc-flow-log|capacity-reservation-fleet|traffic-mirror-filter-rule|vpc-endpoint-connection-device-type|verified-access-instance|verified-access-group|verified-access-endpoint|verified-access-policy|verified-access-trust-provider|vpn-connection-device-type|vpc-block-public-access-exclusion|ipam-resource-discovery|ipam-resource-discovery-association|instance-connect-endpoint|ipam-external-resource-verification-token',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
    'ToPort' => <integer>,
]);

Parameter Details