Skip to content

/AWS1/CL_RDS=>RESTOREDBCLUSTERFROMS3()

About RestoreDBClusterFromS3

Creates an Amazon Aurora DB cluster from MySQL data stored in an Amazon S3 bucket. Amazon RDS must be authorized to access the Amazon S3 bucket and the data must be created using the Percona XtraBackup utility as described in Migrating Data from MySQL by Using an Amazon S3 Bucket in the Amazon Aurora User Guide.

This operation only restores the DB cluster, not the DB instances for that DB cluster. You must invoke the CreateDBInstance operation to create DB instances for the restored DB cluster, specifying the identifier of the restored DB cluster in DBClusterIdentifier. You can create DB instances only after the RestoreDBClusterFromS3 operation has completed and the DB cluster is available.

For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.

This operation only applies to Aurora DB clusters. The source DB engine must be MySQL.

Method Signature

IMPORTING

Required arguments:

IV_DBCLUSTERIDENTIFIER TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The name of the DB cluster to create from the source data in the Amazon S3 bucket. This parameter isn't case-sensitive.

Constraints:

  • Must contain from 1 to 63 letters, numbers, or hyphens.

  • First character must be a letter.

  • Can't end with a hyphen or contain two consecutive hyphens.

Example: my-cluster1

IV_ENGINE TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The name of the database engine to be used for this DB cluster.

Valid Values: aurora-mysql (for Aurora MySQL)

IV_MASTERUSERNAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The name of the master user for the restored DB cluster.

Constraints:

  • Must be 1 to 16 letters or numbers.

  • First character must be a letter.

  • Can't be a reserved word for the chosen database engine.

IV_SOURCEENGINE TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The identifier for the database engine that was backed up to create the files stored in the Amazon S3 bucket.

Valid Values: mysql

IV_SOURCEENGINEVERSION TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The version of the database that the backup files were created from.

MySQL versions 5.7 and 8.0 are supported.

Example: 5.7.40, 8.0.28

IV_S3BUCKETNAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The name of the Amazon S3 bucket that contains the data used to create the Amazon Aurora DB cluster.

IV_S3INGESTIONROLEARN TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The Amazon Resource Name (ARN) of the Amazon Web Services Identity and Access Management (IAM) role that authorizes Amazon RDS to access the Amazon S3 bucket on your behalf.

Optional arguments:

IT_AVAILABILITYZONES TYPE /AWS1/CL_RDSAZS_W=>TT_AVAILABILITYZONES TT_AVAILABILITYZONES

A list of Availability Zones (AZs) where instances in the restored DB cluster can be created.

IV_BACKUPRETENTIONPERIOD TYPE /AWS1/RDSINTEGEROPTIONAL /AWS1/RDSINTEGEROPTIONAL

The number of days for which automated backups of the restored DB cluster are retained. You must specify a minimum value of 1.

Default: 1

Constraints:

  • Must be a value from 1 to 35

IV_CHARACTERSETNAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

A value that indicates that the restored DB cluster should be associated with the specified CharacterSet.

IV_DATABASENAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The database name for the restored DB cluster.

IV_DBCLUSTERPARAMGROUPNAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The name of the DB cluster parameter group to associate with the restored DB cluster. If this argument is omitted, the default parameter group for the engine version is used.

Constraints:

  • If supplied, must match the name of an existing DBClusterParameterGroup.

IT_VPCSECURITYGROUPIDS TYPE /AWS1/CL_RDSVPCSECGRPIDLIST_W=>TT_VPCSECURITYGROUPIDLIST TT_VPCSECURITYGROUPIDLIST

A list of EC2 VPC security groups to associate with the restored DB cluster.

IV_DBSUBNETGROUPNAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

A DB subnet group to associate with the restored DB cluster.

Constraints: If supplied, must match the name of an existing DBSubnetGroup.

Example: mydbsubnetgroup

IV_ENGINEVERSION TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The version number of the database engine to use.

To list all of the available engine versions for aurora-mysql (Aurora MySQL), use the following command:

aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"

Aurora MySQL

Examples: 5.7.mysql_aurora.2.12.0, 8.0.mysql_aurora.3.04.0

IV_PORT TYPE /AWS1/RDSINTEGEROPTIONAL /AWS1/RDSINTEGEROPTIONAL

The port number on which the instances in the restored DB cluster accept connections.

Default: 3306

IV_MASTERUSERPASSWORD TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".

Constraints:

  • Must contain from 8 to 41 characters.

  • Can't be specified if ManageMasterUserPassword is turned on.

IV_OPTIONGROUPNAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

A value that indicates that the restored DB cluster should be associated with the specified option group.

Permanent options can't be removed from an option group. An option group can't be removed from a DB cluster once it is associated with a DB cluster.

IV_PREFERREDBACKUPWINDOW TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The daily time range during which automated backups are created if automated backups are enabled using the BackupRetentionPeriod parameter.

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region. To view the time blocks available, see Backup window in the Amazon Aurora User Guide.

Constraints:

  • Must be in the format hh24:mi-hh24:mi.

  • Must be in Universal Coordinated Time (UTC).

  • Must not conflict with the preferred maintenance window.

  • Must be at least 30 minutes.

IV_PREFERREDMAINTENANCEWIN00 TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

Format: ddd:hh24:mi-ddd:hh24:mi

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred Maintenance Window in the Amazon Aurora User Guide.

Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.

Constraints: Minimum 30-minute window.

IT_TAGS TYPE /AWS1/CL_RDSTAG=>TT_TAGLIST TT_TAGLIST

Tags

IV_STORAGEENCRYPTED TYPE /AWS1/RDSBOOLEANOPTIONAL /AWS1/RDSBOOLEANOPTIONAL

Specifies whether the restored DB cluster is encrypted.

IV_KMSKEYID TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The Amazon Web Services KMS key identifier for an encrypted DB cluster.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.

If the StorageEncrypted parameter is enabled, and you do not specify a value for the KmsKeyId parameter, then Amazon RDS will use your default KMS key. There is a
default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

IV_ENBIAMDATABASEAUTHNTCTN TYPE /AWS1/RDSBOOLEANOPTIONAL /AWS1/RDSBOOLEANOPTIONAL

Specifies whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.

For more information, see IAM Database Authentication in the Amazon Aurora User Guide.

IV_S3PREFIX TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The prefix for all of the file names that contain the data used to create the Amazon Aurora DB cluster. If you do not specify a SourceS3Prefix value, then the Amazon Aurora DB cluster is created by using all of the files in the Amazon S3 bucket.

IV_BACKTRACKWINDOW TYPE /AWS1/RDSLONGOPTIONAL /AWS1/RDSLONGOPTIONAL

The target backtrack window, in seconds. To disable backtracking, set this value to 0.

Currently, Backtrack is only supported for Aurora MySQL DB clusters.

Default: 0

Constraints:

  • If specified, this value must be set to a number from 0 to 259,200 (72 hours).

IT_ENABLECLOUDWATCHLOGSEXP TYPE /AWS1/CL_RDSLOGTYPELIST_W=>TT_LOGTYPELIST TT_LOGTYPELIST

The list of logs that the restored DB cluster is to export to CloudWatch Logs. The values in the list depend on the DB engine being used.

Aurora MySQL

Possible values are audit, error, general, and slowquery.

For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.

IV_DELETIONPROTECTION TYPE /AWS1/RDSBOOLEANOPTIONAL /AWS1/RDSBOOLEANOPTIONAL

Specifies whether to enable deletion protection for the DB cluster. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.

IV_COPYTAGSTOSNAPSHOT TYPE /AWS1/RDSBOOLEANOPTIONAL /AWS1/RDSBOOLEANOPTIONAL

Specifies whether to copy all tags from the restored DB cluster to snapshots of the restored DB cluster. The default is not to copy them.

IV_DOMAIN TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

Specify the Active Directory directory ID to restore the DB cluster in. The domain must be created prior to this operation.

For Amazon Aurora DB clusters, Amazon RDS can use Kerberos Authentication to authenticate users that connect to the DB cluster. For more information, see Kerberos Authentication in the Amazon Aurora User Guide.

IV_DOMAINIAMROLENAME TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

Specify the name of the IAM role to be used when making API calls to the Directory Service.

IO_SERVERLESSV2SCALINGCONF TYPE REF TO /AWS1/CL_RDSSERVERLESSV2SCAC00 /AWS1/CL_RDSSERVERLESSV2SCAC00

ServerlessV2ScalingConfiguration

IV_NETWORKTYPE TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The network type of the DB cluster.

Valid Values:

  • IPV4

  • DUAL

The network type is determined by the DBSubnetGroup specified for the DB cluster. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (DUAL).

For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.

IV_MANAGEMASTERUSERPASSWORD TYPE /AWS1/RDSBOOLEANOPTIONAL /AWS1/RDSBOOLEANOPTIONAL

Specifies whether to manage the master user password with Amazon Web Services Secrets Manager.

For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

Constraints:

  • Can't manage the master user password with Amazon Web Services Secrets Manager if MasterUserPassword is specified.

IV_MASTERUSERSECRETKMSKEYID TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The Amazon Web Services KMS key identifier to encrypt a secret that is automatically generated and managed in Amazon Web Services Secrets Manager.

This setting is valid only if the master user password is managed by RDS in Amazon Web Services Secrets Manager for the DB cluster.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.

If you don't specify MasterUserSecretKmsKeyId, then the aws/secretsmanager KMS key is used to encrypt the secret. If the secret is in a different Amazon Web Services account, then you can't use the aws/secretsmanager KMS key to encrypt the secret, and you must use a customer managed KMS key.

There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

IV_STORAGETYPE TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

Specifies the storage type to be associated with the DB cluster.

Valid Values: aurora, aurora-iopt1

Default: aurora

Valid for: Aurora DB clusters only

IV_ENGINELIFECYCLESUPPORT TYPE /AWS1/RDSSTRING /AWS1/RDSSTRING

The life cycle type for this DB cluster.

By default, this value is set to open-source-rds-extended-support, which enrolls your DB cluster into Amazon RDS Extended Support. At the end of standard support, you can avoid charges for Extended Support by setting the value to open-source-rds-extended-support-disabled. In this case, RDS automatically upgrades your restored DB cluster to a higher engine version, if the major engine version is past its end of standard support date.

You can use this setting to enroll your DB cluster into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB cluster past the end of standard support for that engine version. For more information, see the following sections:

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Valid Values: open-source-rds-extended-support | open-source-rds-extended-support-disabled

Default: open-source-rds-extended-support

RETURNING

OO_OUTPUT TYPE REF TO /AWS1/CL_RDSRESTOREDBCLSTFRM01 /AWS1/CL_RDSRESTOREDBCLSTFRM01