/AWS1/CL_SSM=>CREATEASSOCIATION()

About CreateAssociation

A State Manager association defines the state that you want to maintain on your managed nodes. For example, an association can specify that anti-virus software must be installed and running on your managed nodes, or that certain ports must be closed. For static targets, the association specifies a schedule for when the configuration is reapplied. For dynamic targets, such as an Amazon Web Services resource group or an Amazon Web Services autoscaling group, State Manager, a capability of Amazon Web Services Systems Manager applies the configuration when new managed nodes are added to the group. The association also specifies actions to take when applying the configuration. For example, an association for anti-virus software might run once a day. If the software isn't installed, then State Manager installs it. If the software is installed, but the service isn't running, then the association might instruct State Manager to start the service.

Method Signature

IMPORTING

Required arguments:

IV_NAME TYPE /AWS1/SSMDOCUMENTARN /AWS1/SSMDOCUMENTARN

The name of the SSM Command document or Automation runbook that contains the configuration information for the managed node.

You can specify Amazon Web Services-predefined documents, documents you created, or a document that is shared with you from another Amazon Web Services account.

For Systems Manager documents (SSM documents) that are shared with you from other Amazon Web Services accounts, you must specify the complete SSM document ARN, in the following format:

arn:partition:ssm:region:account-id:document/document-name

For example:

arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document

For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example, AWS-ApplyPatchBaseline or My-Document.

Optional arguments:

IV_DOCUMENTVERSION TYPE /AWS1/SSMDOCUMENTVERSION /AWS1/SSMDOCUMENTVERSION

The document version you want to associate with the targets. Can be a specific version or the default version.

State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the default version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version to default.

IV_INSTANCEID TYPE /AWS1/SSMINSTANCEID /AWS1/SSMINSTANCEID

The managed node ID.

InstanceId has been deprecated. To specify a managed node ID for an association, use the Targets parameter. Requests that include the parameter InstanceID with Systems Manager documents (SSM documents) that use schema version 2.0 or later will fail. In addition, if you use the parameter InstanceId, you can't use the parameters AssociationName, DocumentVersion, MaxErrors, MaxConcurrency, OutputLocation, or ScheduleExpression. To use these parameters, you must use the Targets parameter.

IT_PARAMETERS TYPE /AWS1/CL_SSMPARAMVALUELIST_W=>TT_PARAMETERS TT_PARAMETERS

The parameters for the runtime configuration of the document.

IT_TARGETS TYPE /AWS1/CL_SSMTARGET=>TT_TARGETS TT_TARGETS

The targets for the association. You can target managed nodes by using tags, Amazon Web Services resource groups, all managed nodes in an Amazon Web Services account, or individual managed node IDs. You can target all managed nodes in an Amazon Web Services account by specifying the InstanceIds key with a value of *. For more information about choosing targets for an association, see Understanding targets and rate controls in State Manager associations in the Amazon Web Services Systems Manager User Guide.

IV_SCHEDULEEXPRESSION TYPE /AWS1/SSMSCHEDULEEXPRESSION /AWS1/SSMSCHEDULEEXPRESSION

A cron expression when the association will be applied to the targets.

IO_OUTPUTLOCATION TYPE REF TO /AWS1/CL_SSMINSTASSOCIATIONO00 /AWS1/CL_SSMINSTASSOCIATIONO00

An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.

IV_ASSOCIATIONNAME TYPE /AWS1/SSMASSOCIATIONNAME /AWS1/SSMASSOCIATIONNAME

Specify a descriptive name for the association.

IV_AUTOMATIONTARGETPARAMNAME TYPE /AWS1/SSMAUTOMATIONTGTPARMNAME /AWS1/SSMAUTOMATIONTGTPARMNAME

Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a capability of Amazon Web Services Systems Manager.

IV_MAXERRORS TYPE /AWS1/SSMMAXERRORS /AWS1/SSMMAXERRORS

The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.

Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.

IV_MAXCONCURRENCY TYPE /AWS1/SSMMAXCONCURRENCY /AWS1/SSMMAXCONCURRENCY

The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.

If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.

IV_COMPLIANCESEVERITY TYPE /AWS1/SSMASSOCIATIONCPLNCSEV00 /AWS1/SSMASSOCIATIONCPLNCSEV00

The severity level to assign to the association.

IV_SYNCCOMPLIANCE TYPE /AWS1/SSMASSOCIATIONSYNCCPLNC /AWS1/SSMASSOCIATIONSYNCCPLNC

The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.

In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the PutComplianceItems API operation.

By default, all associations use AUTO mode.

IV_APPLYONLYATCRONINTERVAL TYPE /AWS1/SSMAPPLYONLYATCRONINTE00 /AWS1/SSMAPPLYONLYATCRONINTE00

By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.

IT_CALENDARNAMES TYPE /AWS1/CL_SSMCALENDARNAMEORAR00=>TT_CALENDARNAMEORARNLIST TT_CALENDARNAMEORARNLIST

The names or Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under. The associations only run when that change calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.

IT_TARGETLOCATIONS TYPE /AWS1/CL_SSMTARGETLOCATION=>TT_TARGETLOCATIONS TT_TARGETLOCATIONS

A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association. Use this action to create an association in multiple Regions and multiple accounts.

IV_SCHEDULEOFFSET TYPE /AWS1/SSMSCHEDULEOFFSET /AWS1/SSMSCHEDULEOFFSET

Number of days to wait after the scheduled day to run an association. For example, if you specified a cron schedule of cron(0 0 ? * THU#2 *), you could specify an offset of 3 to run the association each Sunday after the second Thursday of the month. For more information about cron schedules for associations, see Reference: Cron and rate expressions for Systems Manager in the Amazon Web Services Systems Manager User Guide.

To use offsets, you must specify the ApplyOnlyAtCronInterval parameter. This option tells the system not to run an association immediately after you create it.

IV_DURATION TYPE /AWS1/SSMDURATION /AWS1/SSMDURATION

The number of hours the association can run before it is canceled. Duration applies to associations that are currently running, and any pending and in progress commands on all targets. If a target was taken offline for the association to run, it is made available again immediately, without a reboot.

The Duration parameter applies only when both these conditions are true:

• The association for which you specify a duration is cancelable according to the parameters of the SSM command document or Automation runbook associated with this execution.

• The command specifies the ApplyOnlyAtCronInterval parameter, which means that the association doesn't run immediately after it is created, but only according to the specified schedule.

IT_TARGETMAPS TYPE /AWS1/CL_SSMTGTMAPVALUELIST_W=>TT_TARGETMAPS TT_TARGETMAPS

A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.

IT_TAGS TYPE /AWS1/CL_SSMTAG=>TT_TAGLIST TT_TAGLIST

Adds or overwrites one or more tags for a State Manager association. Tags are metadata that you can assign to your Amazon Web Services resources. Tags enable you to categorize your resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value, both of which you define.

IO_ALARMCONFIGURATION TYPE REF TO /AWS1/CL_SSMALARMCONFIGURATION /AWS1/CL_SSMALARMCONFIGURATION

AlarmConfiguration

RETURNING

OO_OUTPUT TYPE REF TO /AWS1/CL_SSMCREASSOCIATIONRSLT /AWS1/CL_SSMCREASSOCIATIONRSLT