class CfnProtection (construct)
Language | Type name |
---|---|
![]() | Amazon.CDK.AWS.Shield.CfnProtection |
![]() | software.amazon.awscdk.services.shield.CfnProtection |
![]() | aws_cdk.aws_shield.CfnProtection |
![]() | @aws-cdk/aws-shield » CfnProtection |
Implements
IConstruct
, IConstruct
, IDependable
, IInspectable
A CloudFormation AWS::Shield::Protection
.
Enables AWS Shield Advanced for a specific AWS resource. The resource can be an Amazon CloudFront distribution, Amazon Route 53 hosted zone, AWS Global Accelerator standard accelerator, Elastic IP Address, Application Load Balancer, or a Classic Load Balancer. You can protect Amazon EC2 instances and Network Load Balancers by association with protected Amazon EC2 Elastic IP addresses.
Use this to add protection to a single resource at a time. You can add protection to multiple resources at once through the Shield Advanced console . For more information see Getting Started with AWS Shield Advanced and Managing resource protections in AWS Shield Advanced .
To configure this resource through AWS CloudFormation , you must be subscribed to AWS Shield Advanced . You can subscribe through the Shield Advanced console and through the APIs. For more information, see Subscribe to AWS Shield Advanced .
See example templates for Shield Advanced in AWS CloudFormation at aws-samples/aws-shield-advanced-examples .
Example
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import * as shield from '@aws-cdk/aws-shield';
declare const block: any;
declare const count: any;
const cfnProtection = new shield.CfnProtection(this, 'MyCfnProtection', {
name: 'name',
resourceArn: 'resourceArn',
// the properties below are optional
applicationLayerAutomaticResponseConfiguration: {
action: {
block: block,
count: count,
},
status: 'status',
},
healthCheckArns: ['healthCheckArns'],
tags: [{
key: 'key',
value: 'value',
}],
});
Initializer
new CfnProtection(scope: Construct, id: string, props: CfnProtectionProps)
Parameters
- scope
Construct
— - scope in which this resource is defined. - id
string
— - scoped id of the resource. - props
Cfn
— - resource properties.Protection Props
Create a new AWS::Shield::Protection
.
Construct Props
Name | Type | Description |
---|---|---|
name | string | The name of the protection. |
resource | string | The ARN (Amazon Resource Name) of the AWS resource that is protected. |
application | IResolvable | Application | The automatic application layer DDoS mitigation settings for the protection. |
health | string[] | The ARN (Amazon Resource Name) of the health check to associate with the protection. |
tags? | Cfn [] | Key:value pairs associated with an AWS resource. |
name
Type:
string
The name of the protection.
For example, My CloudFront distributions
.
resourceArn
Type:
string
The ARN (Amazon Resource Name) of the AWS resource that is protected.
applicationLayerAutomaticResponseConfiguration?
Type:
IResolvable
|
Application
(optional)
The automatic application layer DDoS mitigation settings for the protection.
This configuration determines whether Shield Advanced automatically manages rules in the web ACL in order to respond to application layer events that Shield Advanced determines to be DDoS attacks.
healthCheckArns?
Type:
string[]
(optional)
The ARN (Amazon Resource Name) of the health check to associate with the protection.
Health-based detection provides improved responsiveness and accuracy in attack detection and mitigation.
You can use this option with any resource type except for Route 53 hosted zones.
For more information, see Configuring health-based detection using health checks in the AWS Shield Advanced Developer Guide .
tags?
Type:
Cfn
[]
(optional)
Key:value pairs associated with an AWS resource.
The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each AWS resource.
To modify tags on existing resources, use the AWS Shield Advanced APIs or command line interface. With AWS CloudFormation , you can only add tags to resources during resource creation.
Properties
Name | Type | Description |
---|---|---|
attr | string | The ARN (Amazon Resource Name) of the new protection. |
attr | string | The ID of the new protection. |
cfn | ICfn | Options for this resource, such as condition, update policy etc. |
cfn | { [string]: any } | |
cfn | string | AWS resource type. |
creation | string[] | |
logical | string | The logical ID for this CloudFormation stack element. |
name | string | The name of the protection. |
node | Construct | The construct tree node associated with this construct. |
ref | string | Return a string that will be resolved to a CloudFormation { Ref } for this element. |
resource | string | The ARN (Amazon Resource Name) of the AWS resource that is protected. |
stack | Stack | The stack in which this element is defined. |
tags | Tag | Key:value pairs associated with an AWS resource. |
application | IResolvable | Application | The automatic application layer DDoS mitigation settings for the protection. |
health | string[] | The ARN (Amazon Resource Name) of the health check to associate with the protection. |
static CFN_RESOURCE_TYPE_NAME | string | The CloudFormation resource type name for this resource class. |
attrProtectionArn
Type:
string
The ARN (Amazon Resource Name) of the new protection.
attrProtectionId
Type:
string
The ID of the new protection.
cfnOptions
Type:
ICfn
Options for this resource, such as condition, update policy etc.
cfnProperties
Type:
{ [string]: any }
cfnResourceType
Type:
string
AWS resource type.
creationStack
Type:
string[]
logicalId
Type:
string
The logical ID for this CloudFormation stack element.
The logical ID of the element is calculated from the path of the resource node in the construct tree.
To override this value, use overrideLogicalId(newLogicalId)
.
name
Type:
string
The name of the protection.
For example, My CloudFront distributions
.
node
Type:
Construct
The construct tree node associated with this construct.
ref
Type:
string
Return a string that will be resolved to a CloudFormation { Ref }
for this element.
If, by any chance, the intrinsic reference of a resource is not a string, you could
coerce it to an IResolvable through Lazy.any({ produce: resource.ref })
.
resourceArn
Type:
string
The ARN (Amazon Resource Name) of the AWS resource that is protected.
stack
Type:
Stack
The stack in which this element is defined.
CfnElements must be defined within a stack scope (directly or indirectly).
tags
Type:
Tag
Key:value pairs associated with an AWS resource.
The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each AWS resource.
To modify tags on existing resources, use the AWS Shield Advanced APIs or command line interface. With AWS CloudFormation , you can only add tags to resources during resource creation.
applicationLayerAutomaticResponseConfiguration?
Type:
IResolvable
|
Application
(optional)
The automatic application layer DDoS mitigation settings for the protection.
This configuration determines whether Shield Advanced automatically manages rules in the web ACL in order to respond to application layer events that Shield Advanced determines to be DDoS attacks.
healthCheckArns?
Type:
string[]
(optional)
The ARN (Amazon Resource Name) of the health check to associate with the protection.
Health-based detection provides improved responsiveness and accuracy in attack detection and mitigation.
You can use this option with any resource type except for Route 53 hosted zones.
For more information, see Configuring health-based detection using health checks in the AWS Shield Advanced Developer Guide .
static CFN_RESOURCE_TYPE_NAME
Type:
string
The CloudFormation resource type name for this resource class.
Methods
Name | Description |
---|---|
add | Syntactic sugar for addOverride(path, undefined) . |
add | Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned. |
add | Add a value to the CloudFormation Resource Metadata. |
add | Adds an override to the synthesized CloudFormation resource. |
add | Adds an override that deletes the value of a property from the resource definition. |
add | Adds an override to a resource property. |
apply | Sets the deletion policy of the resource based on the removal policy specified. |
get | Returns a token for an runtime attribute of this resource. |
get | Retrieve a value value from the CloudFormation Resource Metadata. |
inspect(inspector) | Examines the CloudFormation resource and discloses attributes. |
override | Overrides the auto-generated logical ID with a specific ID. |
to | Returns a string representation of this construct. |
protected render |
addDeletionOverride(path)
public addDeletionOverride(path: string): void
Parameters
- path
string
— The path of the value to delete.
Syntactic sugar for addOverride(path, undefined)
.
addDependsOn(target)
public addDependsOn(target: CfnResource): void
Parameters
- target
Cfn
Resource
Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.
addMetadata(key, value)
public addMetadata(key: string, value: any): void
Parameters
- key
string
- value
any
Add a value to the CloudFormation Resource Metadata.
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.)
addOverride(path, value)
public addOverride(path: string, value: any): void
Parameters
- path
string
— - The path of the property, you can use dot notation to override values in complex types. - value
any
— - The value.
Adds an override to the synthesized CloudFormation resource.
To add a
property override, either use addPropertyOverride
or prefix path
with
"Properties." (i.e. Properties.TopicName
).
If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.
To include a literal .
in the property name, prefix with a \
. In most
programming languages you will need to write this as "\\."
because the
\
itself will need to be escaped.
For example,
cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
would add the overrides
"Properties": {
"GlobalSecondaryIndexes": [
{
"Projection": {
"NonKeyAttributes": [ "myattribute" ]
...
}
...
},
{
"ProjectionType": "INCLUDE"
...
},
]
...
}
The value
argument to addOverride
will not be processed or translated
in any way. Pass raw JSON values in here with the correct capitalization
for CloudFormation. If you pass CDK classes or structs, they will be
rendered with lowercased key names, and CloudFormation will reject the
template.
addPropertyDeletionOverride(propertyPath)
public addPropertyDeletionOverride(propertyPath: string): void
Parameters
- propertyPath
string
— The path to the property.
Adds an override that deletes the value of a property from the resource definition.
addPropertyOverride(propertyPath, value)
public addPropertyOverride(propertyPath: string, value: any): void
Parameters
- propertyPath
string
— The path of the property. - value
any
— The value.
Adds an override to a resource property.
Syntactic sugar for addOverride("Properties.<...>", value)
.
applyRemovalPolicy(policy?, options?)
public applyRemovalPolicy(policy?: RemovalPolicy, options?: RemovalPolicyOptions): void
Parameters
- policy
Removal
Policy - options
Removal
Policy Options
Sets the deletion policy of the resource based on the removal policy specified.
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you've removed it from the CDK application or because you've made a change that requires the resource to be replaced.
The resource can be deleted (RemovalPolicy.DESTROY
), or left in your AWS
account for data recovery and cleanup later (RemovalPolicy.RETAIN
).
getAtt(attributeName)
public getAtt(attributeName: string): Reference
Parameters
- attributeName
string
— The name of the attribute.
Returns
Returns a token for an runtime attribute of this resource.
Ideally, use generated attribute accessors (e.g. resource.arn
), but this can be used for future compatibility
in case there is no generated attribute.
getMetadata(key)
public getMetadata(key: string): any
Parameters
- key
string
Returns
any
Retrieve a value value from the CloudFormation Resource Metadata.
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.)
inspect(inspector)
public inspect(inspector: TreeInspector): void
Parameters
- inspector
Tree
— - tree inspector to collect and process attributes.Inspector
Examines the CloudFormation resource and discloses attributes.
overrideLogicalId(newLogicalId)
public overrideLogicalId(newLogicalId: string): void
Parameters
- newLogicalId
string
— The new logical ID to use for this stack element.
Overrides the auto-generated logical ID with a specific ID.
toString()
public toString(): string
Returns
string
Returns a string representation of this construct.
protected renderProperties(props)
protected renderProperties(props: { [string]: any }): { [string]: any }
Parameters
- props
{ [string]: any }
Returns
{ [string]: any }