class CfnPolicy (construct)

Language	Type name
.NET	`Amazon.CDK.AWS.FMS.CfnPolicy`
Java	`software.amazon.awscdk.services.fms.CfnPolicy`
Python	`aws_cdk.aws_fms.CfnPolicy`
TypeScript	`@aws-cdk/aws-fms` » `CfnPolicy`

Implements IConstruct, IConstruct, IDependable, IInspectable

A CloudFormation AWS::FMS::Policy.

An AWS Firewall Manager policy.

Firewall Manager provides the following types of policies:

An AWS Shield Advanced policy, which applies Shield Advanced protection to specified accounts and resources.
An AWS WAF policy (type WAFV2), which defines rule groups to run first in the corresponding AWS WAF web ACL and rule groups to run last in the web ACL.
An AWS WAF Classic policy, which defines a rule group. AWS WAF Classic doesn't support rule groups in Amazon CloudFront , so, to create AWS WAF Classic policies through CloudFront , you first need to create your rule groups outside of CloudFront .
A security group policy, which manages VPC security groups across your AWS organization.
An AWS Network Firewall policy, which provides firewall rules to filter network traffic in specified Amazon VPCs.
A DNS Firewall policy, which provides Amazon Route 53 Resolver DNS Firewall rules to filter DNS queries for specified Amazon VPCs.
A third-party firewall policy, which manages a third-party firewall service such as the Palo Alto Networks Cloud Next-Generation Firewall.

Each policy is specific to one of the types. If you want to enforce more than one policy type across accounts, create multiple policies. You can create multiple policies for each type.

These policies require some setup to use. For more information, see the sections on prerequisites and getting started under AWS Firewall Manager .

Example

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import * as fms from '@aws-cdk/aws-fms';
const cfnPolicy = new fms.CfnPolicy(this, 'MyCfnPolicy', {
  excludeResourceTags: false,
  policyName: 'policyName',
  remediationEnabled: false,
  securityServicePolicyData: {
    type: 'type',

    // the properties below are optional
    managedServiceData: 'managedServiceData',
    policyOption: {
      networkFirewallPolicy: {
        firewallDeploymentModel: 'firewallDeploymentModel',
      },
      thirdPartyFirewallPolicy: {
        firewallDeploymentModel: 'firewallDeploymentModel',
      },
    },
  },

  // the properties below are optional
  deleteAllPolicyResources: false,
  excludeMap: {
    account: ['account'],
    orgunit: ['orgunit'],
  },
  includeMap: {
    account: ['account'],
    orgunit: ['orgunit'],
  },
  policyDescription: 'policyDescription',
  resourcesCleanUp: false,
  resourceSetIds: ['resourceSetIds'],
  resourceTags: [{
    key: 'key',

    // the properties below are optional
    value: 'value',
  }],
  resourceType: 'resourceType',
  resourceTypeList: ['resourceTypeList'],
  tags: [{
    key: 'key',
    value: 'value',
  }],
});

Initializer

new CfnPolicy(scope: Construct, id: string, props: CfnPolicyProps)

Parameters

scope Construct — - scope in which this resource is defined.
id string — - scoped id of the resource.
props CfnPolicyProps — - resource properties.

Create a new AWS::FMS::Policy.

Construct Props

Name	Type	Description
excludeResourceTags	`boolean \|` `IResolvable`	Used only when tags are specified in the `ResourceTags` property.
policyName	`string`	The name of the AWS Firewall Manager policy.
remediationEnabled	`boolean \|` `IResolvable`	Indicates if the policy should be automatically applied to new resources.
securityServicePolicyData	`IResolvable` `\|` `SecurityServicePolicyDataProperty`	Details about the security service that is being used to protect the resources.
deleteAllPolicyResources?	`boolean \|` `IResolvable`	Used when deleting a policy. If `true` , Firewall Manager performs cleanup according to the policy type.
excludeMap?	`IResolvable` `\|` `IEMapProperty`	Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.
includeMap?	`IResolvable` `\|` `IEMapProperty`	Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.
policyDescription?	`string`	The definition of the AWS Network Firewall firewall policy.
resourceSetIds?	`string[]`	The unique identifiers of the resource sets used by the policy.
resourceTags?	`IResolvable` `\|` `IResolvable` `\|` `ResourceTagProperty[]`	An array of `ResourceTag` objects, used to explicitly include resources in the policy scope or explicitly exclude them.
resourceType?	`string`	The type of resource protected by or in scope of the policy.
resourceTypeList?	`string[]`	An array of `ResourceType` objects.
resourcesCleanUp?	`boolean \|` `IResolvable`	Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope.
tags?	`PolicyTagProperty[]`	A collection of key:value pairs associated with an AWS resource.

excludeResourceTags

Type: boolean | IResolvable

Used only when tags are specified in the ResourceTags property.

If this property is True , resources with the specified tags are not in scope of the policy. If it's False , only resources with the specified tags are in scope of the policy.

policyName

Type: string

The name of the AWS Firewall Manager policy.

remediationEnabled

Type: boolean | IResolvable

Indicates if the policy should be automatically applied to new resources.

securityServicePolicyData

Type: IResolvable | SecurityServicePolicyDataProperty

Details about the security service that is being used to protect the resources.

This contains the following settings:

Type - Indicates the service type that the policy uses to protect the resource. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting AWS Support .

ManagedServiceData - Details about the service that are specific to the service type, in JSON format.
Example: DNS_FIREWALL

"{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"

Valid values for preProcessRuleGroups are between 1 and 99. Valid values for postProcessRuleGroups are between 9901 and 10000.

Example: NETWORK_FIREWALL - Centralized deployment model

"{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration

With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig . To configure the Availability Zones in firewallCreationConfig , specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters.

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall centralized deployment model

"{ \"type\":\"THIRD_PARTY_FIREWALL\", \"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\", \"thirdPartyFirewallConfig\":{ \"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to CENTRALIZED .

Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall distributed deployment model

"{\"type\":\"THIRD_PARTY_FIREWALL\",\"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\",\"thirdPartyFirewallConfig\":{\"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{ \"distributedFirewallDeploymentModel\":{ \"distributedFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{ \"availabilityZoneConfigList\":[ {\"availabilityZoneName\":\"${AvailabilityZone}\" } ] } }, \"allowedIPV4CidrList\":[ ] } } } }"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Specification for SHIELD_ADVANCED for Amazon CloudFront distributions

"{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false}"

For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}"

The default value for automaticResponseStatus is IGNORED . The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED . The default value for overrideCustomerWebaclClassic is false .

For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.

Example: WAFV2

"{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAmazonIpReputationList\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

In the loggingConfiguration , you can specify one logDestinationConfigs , you can optionally provide up to 20 redactedFields , and the RedactedFieldType must be one of URI , QUERY_STRING , HEADER , or METHOD .

Example: AWS WAF Classic

"{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"

Example: WAFV2 - AWS Firewall Manager support for AWS WAF managed rule group versioning

"{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

To use a specific version of a AWS WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true , and set version to the version you'd like to use. If you don't set versionEnabled to true , or if you omit versionEnabled , then Firewall Manager uses the default version of the AWS WAF managed rule group.

Example: SECURITY_GROUPS_COMMON

"{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns

"{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

Example: SECURITY_GROUPS_CONTENT_AUDIT

"{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}"

The security group action for content audit can be ALLOW or DENY . For ALLOW , all in-scope security group rules must be within the allowed range of the policy's security group rules. For DENY , all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.

Example: SECURITY_GROUPS_USAGE_AUDIT

"{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"

deleteAllPolicyResources?

Type: boolean | IResolvable (optional)

Used when deleting a policy. If true , Firewall Manager performs cleanup according to the policy type.

For AWS WAF and Shield Advanced policies, Firewall Manager does the following:

Deletes rule groups created by Firewall Manager
Removes web ACLs from in-scope resources
Deletes web ACLs that contain no rules or rule groups

For security group policies, Firewall Manager does the following for each security group in the policy:

Disassociates the security group from in-scope resources
Deletes the security group if it was created through Firewall Manager and if it's no longer associated with any resources through another policy

After the cleanup, in-scope resources are no longer protected by web ACLs in this policy. Protection of out-of-scope resources remains unchanged. Scope is determined by tags that you create and accounts that you associate with the policy. When creating the policy, if you specify that only resources in specific accounts or with specific tags are in scope of the policy, those accounts and resources are handled by the policy. All others are out of scope. If you don't specify tags or accounts, all resources are in scope.

excludeMap?

Type: IResolvable | IEMapProperty (optional)

Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.

Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

You can specify account IDs, OUs, or a combination:

Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

includeMap?

Type: IResolvable | IEMapProperty (optional)

Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.

Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

You can specify account IDs, OUs, or a combination:

Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

policyDescription?

Type: string (optional)

The definition of the AWS Network Firewall firewall policy.

resourceSetIds?

Type: string[] (optional)

The unique identifiers of the resource sets used by the policy.

resourceTags?

Type: IResolvable | IResolvable | ResourceTagProperty[] (optional)

An array of ResourceTag objects, used to explicitly include resources in the policy scope or explicitly exclude them.

If this isn't set, then tags aren't used to modify policy scope. See also ExcludeResourceTags .

resourceType?

Type: string (optional)

The type of resource protected by or in scope of the policy.

This is in the format shown in the AWS Resource Types Reference . To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList .

For AWS WAF and Shield Advanced, example resource types include AWS::ElasticLoadBalancingV2::LoadBalancer and AWS::CloudFront::Distribution . For a security group common policy, valid values are AWS::EC2::NetworkInterface and AWS::EC2::Instance . For a security group content audit policy, valid values are AWS::EC2::SecurityGroup , AWS::EC2::NetworkInterface , and AWS::EC2::Instance . For a security group usage audit policy, the value is AWS::EC2::SecurityGroup . For an AWS Network Firewall policy or DNS Firewall policy, the value is AWS::EC2::VPC .

resourceTypeList?

Type: string[] (optional)

An array of ResourceType objects.

Use this only to specify multiple resource types. To specify a single resource type, use ResourceType .

resourcesCleanUp?

Type: boolean | IResolvable (optional)

Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope.

For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.

By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.

This option is not available for Shield Advanced or AWS WAF Classic policies.

tags?

Type: PolicyTagProperty[] (optional)

A collection of key:value pairs associated with an AWS resource.

The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each AWS resource.

Properties

Name	Type	Description
attrArn	`string`	The Amazon Resource Name (ARN) of the policy.
attrId	`string`	The ID of the policy.
cfnOptions	`ICfnResourceOptions`	Options for this resource, such as condition, update policy etc.
cfnProperties	`{ [string]: any }`
cfnResourceType	`string`	AWS resource type.
creationStack	`string[]`
excludeResourceTags	`boolean \|` `IResolvable`	Used only when tags are specified in the `ResourceTags` property.
logicalId	`string`	The logical ID for this CloudFormation stack element.
node	`ConstructNode`	The construct tree node associated with this construct.
policyName	`string`	The name of the AWS Firewall Manager policy.
ref	`string`	Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
remediationEnabled	`boolean \|` `IResolvable`	Indicates if the policy should be automatically applied to new resources.
securityServicePolicyData	`IResolvable` `\|` `SecurityServicePolicyDataProperty`	Details about the security service that is being used to protect the resources.
stack	`Stack`	The stack in which this element is defined.
deleteAllPolicyResources?	`boolean \|` `IResolvable`	Used when deleting a policy. If `true` , Firewall Manager performs cleanup according to the policy type.
excludeMap?	`IResolvable` `\|` `IEMapProperty`	Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.
includeMap?	`IResolvable` `\|` `IEMapProperty`	Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.
policyDescription?	`string`	The definition of the AWS Network Firewall firewall policy.
resourceSetIds?	`string[]`	The unique identifiers of the resource sets used by the policy.
resourceTags?	`IResolvable` `\|` `IResolvable` `\|` `ResourceTagProperty[]`	An array of `ResourceTag` objects, used to explicitly include resources in the policy scope or explicitly exclude them.
resourceType?	`string`	The type of resource protected by or in scope of the policy.
resourceTypeList?	`string[]`	An array of `ResourceType` objects.
resourcesCleanUp?	`boolean \|` `IResolvable`	Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope.
tags?	`PolicyTagProperty[]`	A collection of key:value pairs associated with an AWS resource.
static CFN_RESOURCE_TYPE_NAME	`string`	The CloudFormation resource type name for this resource class.

attrArn

Type: string

The Amazon Resource Name (ARN) of the policy.

attrId

Type: string

The ID of the policy.

cfnOptions

Type: ICfnResourceOptions

Options for this resource, such as condition, update policy etc.

cfnProperties

Type: { [string]: any }

cfnResourceType

Type: string

AWS resource type.

creationStack

Type: string[]

excludeResourceTags

Type: boolean | IResolvable

Used only when tags are specified in the ResourceTags property.

If this property is True , resources with the specified tags are not in scope of the policy. If it's False , only resources with the specified tags are in scope of the policy.

logicalId

Type: string

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

node

Type: ConstructNode

The construct tree node associated with this construct.

policyName

Type: string

The name of the AWS Firewall Manager policy.

ref

Type: string

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

remediationEnabled

Type: boolean | IResolvable

Indicates if the policy should be automatically applied to new resources.

securityServicePolicyData

Type: IResolvable | SecurityServicePolicyDataProperty

Details about the security service that is being used to protect the resources.

This contains the following settings:

Type - Indicates the service type that the policy uses to protect the resource. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting AWS Support .

ManagedServiceData - Details about the service that are specific to the service type, in JSON format.
Example: DNS_FIREWALL

"{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"

Valid values for preProcessRuleGroups are between 1 and 99. Valid values for postProcessRuleGroups are between 9901 and 10000.

Example: NETWORK_FIREWALL - Centralized deployment model

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration

Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall centralized deployment model

To use the distributed deployment model, you must set FirewallDeploymentModel to CENTRALIZED .

Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall distributed deployment model

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Specification for SHIELD_ADVANCED for Amazon CloudFront distributions

For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}"

For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.

Example: WAFV2

Example: AWS WAF Classic

"{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"

Example: WAFV2 - AWS Firewall Manager support for AWS WAF managed rule group versioning

"{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

Example: SECURITY_GROUPS_COMMON

Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns

"{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

Example: SECURITY_GROUPS_CONTENT_AUDIT

"{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}"

Example: SECURITY_GROUPS_USAGE_AUDIT

"{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"

stack

Type: Stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

deleteAllPolicyResources?

Type: boolean | IResolvable (optional)

Used when deleting a policy. If true , Firewall Manager performs cleanup according to the policy type.

For AWS WAF and Shield Advanced policies, Firewall Manager does the following:

Deletes rule groups created by Firewall Manager
Removes web ACLs from in-scope resources
Deletes web ACLs that contain no rules or rule groups

For security group policies, Firewall Manager does the following for each security group in the policy:

Disassociates the security group from in-scope resources
Deletes the security group if it was created through Firewall Manager and if it's no longer associated with any resources through another policy

excludeMap?

Type: IResolvable | IEMapProperty (optional)

Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.

Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

You can specify account IDs, OUs, or a combination:

Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

includeMap?

Type: IResolvable | IEMapProperty (optional)

Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.

Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

You can specify account IDs, OUs, or a combination:

Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

policyDescription?

Type: string (optional)

The definition of the AWS Network Firewall firewall policy.

resourceSetIds?

Type: string[] (optional)

The unique identifiers of the resource sets used by the policy.

resourceTags?

Type: IResolvable | IResolvable | ResourceTagProperty[] (optional)

An array of ResourceTag objects, used to explicitly include resources in the policy scope or explicitly exclude them.

If this isn't set, then tags aren't used to modify policy scope. See also ExcludeResourceTags .

resourceType?

Type: string (optional)

The type of resource protected by or in scope of the policy.

resourceTypeList?

Type: string[] (optional)

An array of ResourceType objects.

Use this only to specify multiple resource types. To specify a single resource type, use ResourceType .

resourcesCleanUp?

Type: boolean | IResolvable (optional)

For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.

By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.

This option is not available for Shield Advanced or AWS WAF Classic policies.

tags?

Type: PolicyTagProperty[] (optional)

A collection of key:value pairs associated with an AWS resource.

static CFN_RESOURCE_TYPE_NAME

Type: string

The CloudFormation resource type name for this resource class.

Methods

Name	Description
addDeletionOverride(path)	Syntactic sugar for `addOverride(path, undefined)`.
addDependsOn(target)	Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
addMetadata(key, value)	Add a value to the CloudFormation Resource Metadata.
addOverride(path, value)	Adds an override to the synthesized CloudFormation resource.
addPropertyDeletionOverride(propertyPath)	Adds an override that deletes the value of a property from the resource definition.
addPropertyOverride(propertyPath, value)	Adds an override to a resource property.
applyRemovalPolicy(policy?, options?)	Sets the deletion policy of the resource based on the removal policy specified.
getAtt(attributeName)	Returns a token for an runtime attribute of this resource.
getMetadata(key)	Retrieve a value value from the CloudFormation Resource Metadata.
inspect(inspector)	Examines the CloudFormation resource and discloses attributes.
overrideLogicalId(newLogicalId)	Overrides the auto-generated logical ID with a specific ID.
toString()	Returns a string representation of this construct.
protected renderProperties(props)

addDeletionOverride(path)

public addDeletionOverride(path: string): void

Parameters

path string — The path of the value to delete.

Syntactic sugar for addOverride(path, undefined).

addDependsOn(target)

public addDependsOn(target: CfnResource): void

Parameters

target CfnResource

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

addMetadata(key, value)

public addMetadata(key: string, value: any): void

Parameters

key string
value any

Add a value to the CloudFormation Resource Metadata.

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.)

addOverride(path, value)

public addOverride(path: string, value: any): void

Parameters

path string — - The path of the property, you can use dot notation to override values in complex types.
value any — - The value.

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with "Properties." (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example,

cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');

would add the overrides

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

addPropertyDeletionOverride(propertyPath)

public addPropertyDeletionOverride(propertyPath: string): void

Parameters

propertyPath string — The path to the property.

Adds an override that deletes the value of a property from the resource definition.

addPropertyOverride(propertyPath, value)

public addPropertyOverride(propertyPath: string, value: any): void

Parameters

propertyPath string — The path of the property.
value any — The value.

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

applyRemovalPolicy(policy?, options?)

public applyRemovalPolicy(policy?: RemovalPolicy, options?: RemovalPolicyOptions): void

Parameters

policy RemovalPolicy
options RemovalPolicyOptions

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you've removed it from the CDK application or because you've made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

getAtt(attributeName)

public getAtt(attributeName: string): Reference

Parameters

attributeName string — The name of the attribute.

Returns

Reference

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

getMetadata(key)

public getMetadata(key: string): any

Parameters

key string

Returns

any

Retrieve a value value from the CloudFormation Resource Metadata.

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.)

inspect(inspector)

public inspect(inspector: TreeInspector): void

Parameters

inspector TreeInspector — - tree inspector to collect and process attributes.

Examines the CloudFormation resource and discloses attributes.

overrideLogicalId(newLogicalId)

public overrideLogicalId(newLogicalId: string): void

Parameters

newLogicalId string — The new logical ID to use for this stack element.

Overrides the auto-generated logical ID with a specific ID.

toString()

public toString(): string

Returns

string

Returns a string representation of this construct.

protected renderProperties(props)

protected renderProperties(props: { [string]: any }): { [string]: any }

Parameters

props { [string]: any }

Returns

{ [string]: any }