CfnPolicyProps

class aws_cdk.aws_fms.CfnPolicyProps(*, exclude_resource_tags, policy_name, remediation_enabled, security_service_policy_data, delete_all_policy_resources=None, exclude_map=None, include_map=None, policy_description=None, resources_clean_up=None, resource_set_ids=None, resource_tags=None, resource_type=None, resource_type_list=None, tags=None)

Bases: object

Properties for defining a CfnPolicy.

Parameters:

exclude_resource_tags (Union[bool, IResolvable]) – Used only when tags are specified in the ResourceTags property. If this property is True , resources with the specified tags are not in scope of the policy. If it’s False , only resources with the specified tags are in scope of the policy.
policy_name (str) – The name of the AWS Firewall Manager policy.
remediation_enabled (Union[bool, IResolvable]) – Indicates if the policy should be automatically applied to new resources.
security_service_policy_data (Union[IResolvable, SecurityServicePolicyDataProperty, Dict[str, Any]]) –
Details about the security service that is being used to protect the resources. This contains the following settings: - Type - Indicates the service type that the policy uses to protect the resource. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting AWS Support . Valid values: DNS_FIREWALL | NETWORK_FIREWALL | SECURITY_GROUPS_COMMON | SECURITY_GROUPS_CONTENT_AUDIT | SECURITY_GROUPS_USAGE_AUDIT | SHIELD_ADVANCED | THIRD_PARTY_FIREWALL | WAFV2 | WAF - ManagedServiceData - Details about the service that are specific to the service type, in JSON format. - Example: DNS_FIREWALL "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}" .. epigraph:: Valid values for preProcessRuleGroups are between 1 and 99. Valid values for postProcessRuleGroups are between 9901 and 10000. - Example: NETWORK_FIREWALL - Centralized deployment model "{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}" To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED . - Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED . - Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED . - Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig . To configure the Availability Zones in firewallCreationConfig , specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters. To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED . - Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED . - Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall centralized deployment model "{ \"type\":\"THIRD_PARTY_FIREWALL\", \"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\", \"thirdPartyFirewallConfig\":{ \"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}" To use the distributed deployment model, you must set FirewallDeploymentModel to CENTRALIZED . - Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall distributed deployment model "{\"type\":\"THIRD_PARTY_FIREWALL\",\"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\",\"thirdPartyFirewallConfig\":{\"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{ \"distributedFirewallDeploymentModel\":{ \"distributedFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{ \"availabilityZoneConfigList\":[ {\"availabilityZoneName\":\"${AvailabilityZone}\" } ] } }, \"allowedIPV4CidrList\":[ ] } } } }" To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED . - Specification for SHIELD_ADVANCED for Amazon CloudFront distributions "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false}" For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}" The default value for automaticResponseStatus is IGNORED . The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED . The default value for overrideCustomerWebaclClassic is false . For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string. - Example: WAFV2 "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAmazonIpReputationList\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}" In the loggingConfiguration , you can specify one logDestinationConfigs , you can optionally provide up to 20 redactedFields , and the RedactedFieldType must be one of URI , QUERY_STRING , HEADER , or METHOD . - Example: AWS WAF Classic "{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}" - Example: WAFV2 - AWS Firewall Manager support for AWS WAF managed rule group versioning "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}" To use a specific version of a AWS WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true , and set version to the version you’d like to use. If you don’t set versionEnabled to true , or if you omit versionEnabled , then Firewall Manager uses the default version of the AWS WAF managed rule group. - Example: SECURITY_GROUPS_COMMON "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}" - Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}" - Example: SECURITY_GROUPS_CONTENT_AUDIT "{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}" The security group action for content audit can be ALLOW or DENY . For ALLOW , all in-scope security group rules must be within the allowed range of the policy’s security group rules. For DENY , all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group. - Example: SECURITY_GROUPS_USAGE_AUDIT "{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"
delete_all_policy_resources (Union[bool, IResolvable, None]) – Used when deleting a policy. If true , Firewall Manager performs cleanup according to the policy type. For AWS WAF and Shield Advanced policies, Firewall Manager does the following: - Deletes rule groups created by Firewall Manager - Removes web ACLs from in-scope resources - Deletes web ACLs that contain no rules or rule groups For security group policies, Firewall Manager does the following for each security group in the policy: - Disassociates the security group from in-scope resources - Deletes the security group if it was created through Firewall Manager and if it’s no longer associated with any resources through another policy After the cleanup, in-scope resources are no longer protected by web ACLs in this policy. Protection of out-of-scope resources remains unchanged. Scope is determined by tags that you create and accounts that you associate with the policy. When creating the policy, if you specify that only resources in specific accounts or with specific tags are in scope of the policy, those accounts and resources are handled by the policy. All others are out of scope. If you don’t specify tags or accounts, all resources are in scope.
exclude_map (Union[IResolvable, IEMapProperty, Dict[str, Any], None]) – Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time. You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap . You can specify account IDs, OUs, or a combination: - Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} . - Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} . - Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .
include_map (Union[IResolvable, IEMapProperty, Dict[str, Any], None]) – Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time. You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap . You can specify account IDs, OUs, or a combination: - Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} . - Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} . - Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .
policy_description (Optional[str]) – Your description of the AWS Firewall Manager policy.
resources_clean_up (Union[bool, IResolvable, None]) – Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope. For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope. By default, Firewall Manager doesn’t remove protections or delete Firewall Manager managed resources. This option is not available for Shield Advanced or AWS WAF Classic policies.
resource_set_ids (Optional[Sequence[str]]) – The unique identifiers of the resource sets used by the policy.
resource_tags (Union[IResolvable, Sequence[Union[IResolvable, ResourceTagProperty, Dict[str, Any]]], None]) – An array of ResourceTag objects, used to explicitly include resources in the policy scope or explicitly exclude them. If this isn’t set, then tags aren’t used to modify policy scope. See also ExcludeResourceTags .
resource_type (Optional[str]) – The type of resource protected by or in scope of the policy. This is in the format shown in the AWS Resource Types Reference . To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList . The following are valid resource types for each Firewall Manager policy type: - AWS WAF Classic - AWS::ApiGateway::Stage , AWS::CloudFront::Distribution , and AWS::ElasticLoadBalancingV2::LoadBalancer . - AWS WAF - AWS::ApiGateway::Stage , AWS::ElasticLoadBalancingV2::LoadBalancer , and AWS::CloudFront::Distribution . - Shield Advanced - AWS::ElasticLoadBalancingV2::LoadBalancer , AWS::ElasticLoadBalancing::LoadBalancer , AWS::EC2::EIP , and AWS::CloudFront::Distribution . - Network ACL - AWS::EC2::Subnet . - Security group usage audit - AWS::EC2::SecurityGroup . - Security group content audit - AWS::EC2::SecurityGroup , AWS::EC2::NetworkInterface , and AWS::EC2::Instance . - DNS Firewall, AWS Network Firewall , and third-party firewall - AWS::EC2::VPC .
resource_type_list (Optional[Sequence[str]]) – An array of ResourceType objects. Use this only to specify multiple resource types. To specify a single resource type, use ResourceType .
tags (Optional[Sequence[Union[PolicyTagProperty, Dict[str, Any]]]]) – A collection of key:value pairs associated with an AWS resource. The key:value pair can be anything you define. Typically, the tag key represents a category (such as “environment”) and the tag value represents a specific value within that category (such as “test,” “development,” or “production”). You can add up to 50 tags to each AWS resource.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_fms as fms

cfn_policy_props = fms.CfnPolicyProps(
    exclude_resource_tags=False,
    policy_name="policyName",
    remediation_enabled=False,
    security_service_policy_data=fms.CfnPolicy.SecurityServicePolicyDataProperty(
        type="type",

        # the properties below are optional
        managed_service_data="managedServiceData",
        policy_option=fms.CfnPolicy.PolicyOptionProperty(
            network_acl_common_policy=fms.CfnPolicy.NetworkAclCommonPolicyProperty(
                network_acl_entry_set=fms.CfnPolicy.NetworkAclEntrySetProperty(
                    force_remediate_for_first_entries=False,
                    force_remediate_for_last_entries=False,

                    # the properties below are optional
                    first_entries=[fms.CfnPolicy.NetworkAclEntryProperty(
                        egress=False,
                        protocol="protocol",
                        rule_action="ruleAction",

                        # the properties below are optional
                        cidr_block="cidrBlock",
                        icmp_type_code=fms.CfnPolicy.IcmpTypeCodeProperty(
                            code=123,
                            type=123
                        ),
                        ipv6_cidr_block="ipv6CidrBlock",
                        port_range=fms.CfnPolicy.PortRangeProperty(
                            from=123,
                            to=123
                        )
                    )],
                    last_entries=[fms.CfnPolicy.NetworkAclEntryProperty(
                        egress=False,
                        protocol="protocol",
                        rule_action="ruleAction",

                        # the properties below are optional
                        cidr_block="cidrBlock",
                        icmp_type_code=fms.CfnPolicy.IcmpTypeCodeProperty(
                            code=123,
                            type=123
                        ),
                        ipv6_cidr_block="ipv6CidrBlock",
                        port_range=fms.CfnPolicy.PortRangeProperty(
                            from=123,
                            to=123
                        )
                    )]
                )
            ),
            network_firewall_policy=fms.CfnPolicy.NetworkFirewallPolicyProperty(
                firewall_deployment_model="firewallDeploymentModel"
            ),
            third_party_firewall_policy=fms.CfnPolicy.ThirdPartyFirewallPolicyProperty(
                firewall_deployment_model="firewallDeploymentModel"
            )
        )
    ),

    # the properties below are optional
    delete_all_policy_resources=False,
    exclude_map={
        "account": ["account"],
        "orgunit": ["orgunit"]
    },
    include_map={
        "account": ["account"],
        "orgunit": ["orgunit"]
    },
    policy_description="policyDescription",
    resources_clean_up=False,
    resource_set_ids=["resourceSetIds"],
    resource_tags=[fms.CfnPolicy.ResourceTagProperty(
        key="key",

        # the properties below are optional
        value="value"
    )],
    resource_type="resourceType",
    resource_type_list=["resourceTypeList"],
    tags=[fms.CfnPolicy.PolicyTagProperty(
        key="key",
        value="value"
    )]
)

Attributes

delete_all_policy_resources

Used when deleting a policy. If true , Firewall Manager performs cleanup according to the policy type.

For AWS WAF and Shield Advanced policies, Firewall Manager does the following:

Deletes rule groups created by Firewall Manager
Removes web ACLs from in-scope resources
Deletes web ACLs that contain no rules or rule groups

For security group policies, Firewall Manager does the following for each security group in the policy:

Disassociates the security group from in-scope resources
Deletes the security group if it was created through Firewall Manager and if it’s no longer associated with any resources through another policy

After the cleanup, in-scope resources are no longer protected by web ACLs in this policy. Protection of out-of-scope resources remains unchanged. Scope is determined by tags that you create and accounts that you associate with the policy. When creating the policy, if you specify that only resources in specific accounts or with specific tags are in scope of the policy, those accounts and resources are handled by the policy. All others are out of scope. If you don’t specify tags or accounts, all resources are in scope.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-deleteallpolicyresources

exclude_map

Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to exclude from the policy.

Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

You can specify account IDs, OUs, or a combination:

Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-excludemap

exclude_resource_tags

Used only when tags are specified in the ResourceTags property.

If this property is True , resources with the specified tags are not in scope of the policy. If it’s False , only resources with the specified tags are in scope of the policy.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-excluderesourcetags

include_map

Specifies the AWS account IDs and AWS Organizations organizational units (OUs) to include in the policy.

Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.

You can specify inclusions or exclusions, but not both. If you specify an IncludeMap , AWS Firewall Manager applies the policy to all accounts specified by the IncludeMap , and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap , then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap .

You can specify account IDs, OUs, or a combination:

Specify account IDs by setting the key to ACCOUNT . For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]} .
Specify OUs by setting the key to ORGUNIT . For example, the following is a valid map: {“ORGUNIT” : [“ouid111”, “ouid112”]} .
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORGUNIT” : [“ouid111”, “ouid112”]} .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-includemap

policy_description

Your description of the AWS Firewall Manager policy.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-policydescription

policy_name

The name of the AWS Firewall Manager policy.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-policyname

remediation_enabled

Indicates if the policy should be automatically applied to new resources.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-remediationenabled

resource_set_ids

The unique identifiers of the resource sets used by the policy.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-resourcesetids

resource_tags

An array of ResourceTag objects, used to explicitly include resources in the policy scope or explicitly exclude them.

If this isn’t set, then tags aren’t used to modify policy scope. See also ExcludeResourceTags .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-resourcetags

resource_type

The type of resource protected by or in scope of the policy.

This is in the format shown in the AWS Resource Types Reference . To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList .

The following are valid resource types for each Firewall Manager policy type:

AWS WAF Classic - AWS::ApiGateway::Stage , AWS::CloudFront::Distribution , and AWS::ElasticLoadBalancingV2::LoadBalancer .
AWS WAF - AWS::ApiGateway::Stage , AWS::ElasticLoadBalancingV2::LoadBalancer , and AWS::CloudFront::Distribution .
Shield Advanced - AWS::ElasticLoadBalancingV2::LoadBalancer , AWS::ElasticLoadBalancing::LoadBalancer , AWS::EC2::EIP , and AWS::CloudFront::Distribution .
Network ACL - AWS::EC2::Subnet .
Security group usage audit - AWS::EC2::SecurityGroup .
Security group content audit - AWS::EC2::SecurityGroup , AWS::EC2::NetworkInterface , and AWS::EC2::Instance .
DNS Firewall, AWS Network Firewall , and third-party firewall - AWS::EC2::VPC .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-resourcetype

resource_type_list

An array of ResourceType objects.

Use this only to specify multiple resource types. To specify a single resource type, use ResourceType .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-resourcetypelist

resources_clean_up

Indicates whether AWS Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope.

For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.

By default, Firewall Manager doesn’t remove protections or delete Firewall Manager managed resources.

This option is not available for Shield Advanced or AWS WAF Classic policies.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-resourcescleanup

security_service_policy_data

Details about the security service that is being used to protect the resources.

This contains the following settings:

Type - Indicates the service type that the policy uses to protect the resource. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting AWS Support .

ManagedServiceData - Details about the service that are specific to the service type, in JSON format.
Example: DNS_FIREWALL

"{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}" .. epigraph:

Valid values for ``preProcessRuleGroups`` are between 1 and 99. Valid values for ``postProcessRuleGroups`` are between 9901 and 10000.

Example: NETWORK_FIREWALL - Centralized deployment model

"{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig . To configure the Availability Zones in firewallCreationConfig , specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters.

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management

"{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall centralized deployment model

"{ \"type\":\"THIRD_PARTY_FIREWALL\", \"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\", \"thirdPartyFirewallConfig\":{ \"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}"

To use the distributed deployment model, you must set FirewallDeploymentModel to CENTRALIZED .

Example: THIRD_PARTY_FIREWALL - Palo Alto Networks Cloud Next-Generation Firewall distributed deployment model

"{\"type\":\"THIRD_PARTY_FIREWALL\",\"thirdPartyFirewall\":\"PALO_ALTO_NETWORKS_CLOUD_NGFW\",\"thirdPartyFirewallConfig\":{\"thirdPartyFirewallPolicyList\":[\"global-1\"] },\"firewallDeploymentModel\":{ \"distributedFirewallDeploymentModel\":{ \"distributedFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{ \"availabilityZoneConfigList\":[ {\"availabilityZoneName\":\"${AvailabilityZone}\" } ] } }, \"allowedIPV4CidrList\":[ ] } } } }"

To use the distributed deployment model, you must set FirewallDeploymentModel to DISTRIBUTED .

Specification for SHIELD_ADVANCED for Amazon CloudFront distributions

"{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false}"

For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}"

The default value for automaticResponseStatus is IGNORED . The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED . The default value for overrideCustomerWebaclClassic is false .

For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.

Example: WAFV2

"{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAmazonIpReputationList\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

In the loggingConfiguration , you can specify one logDestinationConfigs , you can optionally provide up to 20 redactedFields , and the RedactedFieldType must be one of URI , QUERY_STRING , HEADER , or METHOD .

Example: AWS WAF Classic

"{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"

Example: WAFV2 - AWS Firewall Manager support for AWS WAF managed rule group versioning

"{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}"

To use a specific version of a AWS WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true , and set version to the version you’d like to use. If you don’t set versionEnabled to true , or if you omit versionEnabled , then Firewall Manager uses the default version of the AWS WAF managed rule group.

Example: SECURITY_GROUPS_COMMON

"{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns

"{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"

Example: SECURITY_GROUPS_CONTENT_AUDIT

"{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}"

The security group action for content audit can be ALLOW or DENY . For ALLOW , all in-scope security group rules must be within the allowed range of the policy’s security group rules. For DENY , all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.

Example: SECURITY_GROUPS_USAGE_AUDIT

"{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-securityservicepolicydata

tags

value pairs associated with an AWS resource.

The key:value pair can be anything you define. Typically, the tag key represents a category (such as “environment”) and the tag value represents a specific value within that category (such as “test,” “development,” or “production”). You can add up to 50 tags to each AWS resource.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-fms-policy.html#cfn-fms-policy-tags
Type:: A collection of key