Stream

class aws_cdk.aws_kinesis.Stream(scope, id, *, encryption=None, encryption_key=None, removal_policy=None, retention_period=None, shard_count=None, stream_mode=None, stream_name=None)

Bases: Resource

A Kinesis stream.

Can be encrypted with a KMS key.

ExampleMetadata:

infused

Example:

key = kms.Key(self, "MyKey")

kinesis.Stream(self, "MyEncryptedStream",
    encryption=kinesis.StreamEncryption.KMS,
    encryption_key=key
)
Parameters:

  • scope (Construct) –

  • id (str) –

  • encryption (Optional[StreamEncryption]) – The kind of server-side encryption to apply to this stream. If you choose KMS, you can specify a KMS key via encryptionKey. If encryption key is not specified, a key will automatically be created. Default: - StreamEncryption.KMS if encrypted Streams are supported in the region or StreamEncryption.UNENCRYPTED otherwise. StreamEncryption.KMS if an encryption key is supplied through the encryptionKey property

  • encryption_key (Optional[IKey]) – External KMS key to use for stream encryption. The ‘encryption’ property must be set to “Kms”. Default: - Kinesis Data Streams master key (‘/alias/aws/kinesis’). If encryption is set to StreamEncryption.KMS and this property is undefined, a new KMS key will be created and associated with this stream.

  • removal_policy (Optional[RemovalPolicy]) – Policy to apply when the stream is removed from the stack. Default: RemovalPolicy.RETAIN

  • retention_period (Optional[Duration]) – The number of hours for the data records that are stored in shards to remain accessible. Default: Duration.hours(24)

  • shard_count (Union[int, float, None]) – The number of shards for the stream. Can only be provided if streamMode is Provisioned. Default: 1

  • stream_mode (Optional[StreamMode]) – The capacity mode of this stream. Default: StreamMode.PROVISIONED

  • stream_name (Optional[str]) – Enforces a particular physical stream name. Default:

Methods

add_to_resource_policy(statement)

Adds a statement to the IAM resource policy associated with this stream.

If this stream was created in this stack (new Strem), a resource policy will be automatically created upon the first call to addToResourcePolicy. If the stream is imported (Stream.import), then this is a no-op.

Parameters:

statement (PolicyStatement) –

Return type:

AddToResourcePolicyResult

apply_removal_policy(policy)

Apply the given removal policy to this resource.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (RemovalPolicy) –

Return type:

None

grant(grantee, *actions)

Grant the indicated permissions on this stream to the given IAM principal (Role/Group/User).

Parameters:
Return type:

Grant

grant_read(grantee)

Grant read permissions for this stream and its contents to an IAM principal (Role/Group/User).

If an encryption key is used, permission to ues the key to decrypt the contents of the stream will also be granted.

Parameters:

grantee (IGrantable) –

Return type:

Grant

grant_read_write(grantee)

Grants read/write permissions for this stream and its contents to an IAM principal (Role/Group/User).

If an encryption key is used, permission to use the key for encrypt/decrypt will also be granted.

Parameters:

grantee (IGrantable) –

Return type:

Grant

grant_write(grantee)

Grant write permissions for this stream and its contents to an IAM principal (Role/Group/User).

If an encryption key is used, permission to ues the key to encrypt the contents of the stream will also be granted.

Parameters:

grantee (IGrantable) –

Return type:

Grant

metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Return stream metric based from its metric name.

Parameters:

  • metric_name (str) – name of the stream metric.

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_get_records(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of records retrieved from the shard, measured over the specified time period.

Minimum, Maximum, and Average statistics represent the records in a single GetRecords operation for the stream in the specified time period.

average The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_get_records_bytes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of bytes retrieved from the Kinesis stream, measured over the specified time period.

Minimum, Maximum, and Average statistics represent the bytes in a single GetRecords operation for the stream in the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_get_records_iterator_age_milliseconds(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The age of the last record in all GetRecords calls made against a Kinesis stream, measured over the specified time period.

Age is the difference between the current time and when the last record of the GetRecords call was written to the stream. The Minimum and Maximum statistics can be used to track the progress of Kinesis consumer applications. A value of zero indicates that the records being read are completely caught up with the stream.

The metric defaults to maximum over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_get_records_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of successful GetRecords operations per stream, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_get_records_success(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of successful GetRecords operations per stream, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_incoming_bytes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of bytes successfully put to the Kinesis stream over the specified time period.

This metric includes bytes from PutRecord and PutRecords operations. Minimum, Maximum, and Average statistics represent the bytes in a single put operation for the stream in the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_incoming_records(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of records successfully put to the Kinesis stream over the specified time period.

This metric includes record counts from PutRecord and PutRecords operations. Minimum, Maximum, and Average statistics represent the records in a single put operation for the stream in the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_record_bytes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of bytes put to the Kinesis stream using the PutRecord operation over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_record_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The time taken per PutRecord operation, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_record_success(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of successful PutRecord operations per Kinesis stream, measured over the specified time period.

Average reflects the percentage of successful writes to a stream.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_records_bytes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of bytes put to the Kinesis stream using the PutRecords operation over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_records_failed_records(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of records rejected due to internal failures in a PutRecords operation per Kinesis data stream, measured over the specified time period.

Occasional internal failures are to be expected and should be retried.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_records_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The time taken per PutRecords operation, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_records_success(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of PutRecords operations where at least one record succeeded, per Kinesis stream, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_records_successful_records(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of successful records in a PutRecords operation per Kinesis data stream, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_records_throttled_records(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of records rejected due to throttling in a PutRecords operation per Kinesis data stream, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_put_records_total_records(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The total number of records sent in a PutRecords operation per Kinesis data stream, measured over the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_read_provisioned_throughput_exceeded(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of GetRecords calls throttled for the stream over the specified time period.

The most commonly used statistic for this metric is Average.

When the Minimum statistic has a value of 1, all records were throttled for the stream during the specified time period.

When the Maximum statistic has a value of 0 (zero), no records were throttled for the stream during the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_write_provisioned_throughput_exceeded(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of records rejected due to throttling for the stream over the specified time period.

This metric includes throttling from PutRecord and PutRecords operations.

When the Minimum statistic has a non-zero value, records were being throttled for the stream during the specified time period.

When the Maximum statistic has a value of 0 (zero), no records were being throttled for the stream during the specified time period.

The metric defaults to average over 5 minutes, it can be changed by passing statistic and period properties.

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

to_string()

Returns a string representation of this construct.

Return type:

str

Attributes

encryption_key

Optional KMS encryption key associated with this stream.

env

The environment this resource belongs to.

For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.

node

The tree node.

stack

The stack in which this resource is defined.

stream_arn

The ARN of the stream.

stream_name

The name of the stream.

Static Methods

classmethod from_stream_arn(scope, id, stream_arn)

Import an existing Kinesis Stream provided an ARN.

Parameters:

  • scope (Construct) – The parent creating construct (usually this).

  • id (str) – The construct’s name.

  • stream_arn (str) – Stream ARN (i.e. arn:aws:kinesis:::stream/Foo).

Return type:

IStream

classmethod from_stream_attributes(scope, id, *, stream_arn, encryption_key=None)

Creates a Stream construct that represents an external stream.

Parameters:

  • scope (Construct) – The parent creating construct (usually this).

  • id (str) – The construct’s name.

  • stream_arn (str) – The ARN of the stream.

  • encryption_key (Optional[IKey]) – The KMS key securing the contents of the stream if encryption is enabled. Default: - No encryption

Return type:

IStream

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:

x (Any) – Any object.

Return type:

bool

Returns:

true if x is an object created from a class which extends Construct.

classmethod is_owned_resource(construct)

Returns true if the construct was created by CDK, and false otherwise.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_resource(construct)

Check whether the given construct is a Resource.

Parameters:

construct (IConstruct) –

Return type:

bool