AWS CLI and aws-shell tutorial for AWS Cloud9 - AWS Cloud9
PrerequisitesStep 1: Install the AWS CLI, the aws-shell, or both in your environmentStep 2: Set up credentials management in your environmentStep 3: Run basic commands with the AWS CLI or the aws-shell in your environmentStep 4: Clean up

AWS Cloud9 is no longer available to new customers. Existing customers of AWS Cloud9 can continue to use the service as normal. Learn more

AWS CLI and aws-shell tutorial for AWS Cloud9

The following tutorial enables you to set up the AWS Command Line Interface (AWS CLI), the aws-shell, or both in an AWS Cloud9 development environment. The AWS CLI and the aws-shell are unified tools that provide a consistent interface for interacting with all parts of AWS. You can use the AWS CLI instead of the AWS Management Console to quickly run commands to interact with AWS, and some of these commands can be run with the AWS CLI or alternatively using AWS CloudShell.

For more information about the AWS CLI, see the AWS Command Line Interface User Guide. For the aws-shell, see the following resources:

For a list of commands you can run with the AWS CLI to interact with AWS, see the AWS CLI Command Reference. You can use the same commands with AWS CloudShell, except that you start commands without the aws prefix.

Creating this sample might result in charges to your AWS account. These include possible charges for services such as Amazon EC2 and Amazon S3. For more information, see Amazon EC2 Pricing and Amazon S3 Pricing.

Prerequisites

Before you use this sample, make sure that your setup meets the following requirements:

  • You must have an existing AWS Cloud9 EC2 development environment. This sample assumes that you already have an EC2 environment that's connected to an Amazon EC2 instance that runs Amazon Linux or Ubuntu Server. If you have a different type of environment or operating system, you might need to adapt this sample's instructions to set up related tools. For more information, see Creating an environment in AWS Cloud9.

  • You have the AWS Cloud9 IDE for the existing environment already open. When you open an environment, AWS Cloud9 opens the IDE for that environment in your web browser. For more information, see Opening an environment in AWS Cloud9.

Step 1: Install the AWS CLI, the aws-shell, or both in your environment

In this step, you use the AWS Cloud9 IDE to install the AWS CLI, the aws-shell, or both in your environment so you can run commands to interact with AWS.

If you are using an AWS Cloud9 EC2 development environment and you only want to use the AWS CLI, you can skip ahead to Step 3: Run basic commands with the AWS CLI or the aws-shell in your environment. This is because the AWS CLI is already installed in an EC2 environment, and a set of AWS access credentials is already set up in the environment. For more information, see AWS managed temporary credentials.

If you are not using an EC2 environment, do the following to install the AWS CLI:

  1. With your environment open, in the IDE, check whether the AWS CLI is already installed. In the terminal, run the aws --version command. (To start a new terminal session, on the menu bar, choose Window, New Terminal.) If the AWS CLI is installed, the version number is displayed, with information such as the version numbers of Python and the operating system version number of your Amazon EC2 instance or your own server. If the AWS CLI is installed, skip ahead to Step 2: Set up credentials management in your environment.

  2. To install the AWS CLI, see Installing the AWS Command Line Interface in the AWS Command Line Interface User Guide. For example, for an EC2 environment running Amazon Linux, run these three commands, one at a time, in the terminal to install the AWS CLI.

    sudo yum -y update          # Install the latest system updates.
sudo yum -y install aws-cli # Install the AWS CLI.
aws --version               # Confirm the AWS CLI was installed.

    For an EC2 environment running Ubuntu Server, run these three commands instead, one at a time, in the terminal to install the AWS CLI.

    sudo apt update             # Install the latest system updates.
sudo apt install -y awscli  # Install the AWS CLI.
aws --version               # Confirm the AWS CLI was installed.

If you want to install the aws-shell, do the following:

  1. With your environment open, in the IDE, check whether the aws-shell is already installed. In the terminal, run the aws-shell command. (To start a new terminal session, on the menu bar, choose Window, New Terminal.) If the aws-shell is installed, the aws> prompt is displayed. If the aws-shell is installed, skip ahead to Step 2: Set up credentials management in your environment.

  2. To install the aws-shell, you use pip. To use pip, you must have Python installed.

    To check whether Python is already installed (and to install it if needed), follow the instructions in Step 1: Install Python in the Python Sample, and then return to this topic.

    To check whether pip is already installed, in the terminal, run the pip --version command. If pip is installed, the version number is displayed. If pip is not installed, install it by run these three commands, one at a time, in the terminal.

    wget https://bootstrap.pypa.io/get-pip.py # Get the pip install file.
sudo python get-pip.py                    # Install pip. (You might need to run 'sudo python2 get-pip.py' or 'sudo python3 get-pip.py' instead, depending on how Python is installed.)
rm get-pip.py                             # Delete the pip install file, as it is no longer needed.

  3. To use pip to install the aws-shell, run the following command.

    sudo pip install aws-shell

Step 2: Set up credentials management in your environment

Each time you use the AWS CLI or the aws-shell to call an AWS service, you must provide a set of credentials with the call. These credentials determine whether the AWS CLI or the aws-shell has the appropriate permissions to make that call. If the credentials don't cover the appropriate permissions, the call will fail.

If you are using an AWS Cloud9 EC2 development environment, you can skip ahead to Step 3: Run basic commands with the AWS CLI or the aws-shell in your environment. This is because credentials are already set up in an EC2 environment. For more information, see AWS managed temporary credentials.

If you are not using an EC2 environment, you must manually store your credentials within the environment. To do this, follow the instructions in Calling AWS services from an environment in AWS Cloud9, and then return to this topic.

Step 3: Run basic commands with the AWS CLI or the aws-shell in your environment

In this step, you use the AWS CLI or the aws-shell in your environment to create a bucket in Amazon S3, list your available buckets, and then delete the bucket.

  1. If you want to use the aws-shell but haven't started it yet, start the aws-shell by running the aws-shell command. The aws> prompt is displayed.

  2. Create a bucket. Run the aws s3 mb command with the AWS CLI or s3 mb command with the aws-shell, supplying the name of the bucket to create. In this example, we use a bucket named cloud9-123456789012-bucket, where 123456789012 is your AWS account ID. If you use a different name, substitute it throughout this step.

    aws s3 mb s3://cloud9-123456789012-bucket # For the AWS CLI.
s3 mb s3://cloud9-123456789012-bucket     # For the aws-shell.
    Note

    Bucket names must be unique across all of AWS, not just your AWS account. The preceding suggested bucket name can help you come up with a unique bucket name. If you get a message that contains the error BucketAlreadyExists, you must run the command again with a different bucket name.

  3. List your available buckets. Run the aws s3 ls command with the AWS CLI or the s3 ls command with the aws-shell. A list of your available buckets is displayed.

  4. Delete the bucket. Run the aws s3 rb command with the AWS CLI or the s3 rb command with the aws-shell, supplying the name of the bucket to delete.

    aws s3 rb s3://cloud9-123456789012-bucket # For the AWS CLI.
s3 rb s3://cloud9-123456789012-bucket     # For the aws-shell.

    To confirm whether the bucket was deleted, run the aws s3 ls command again with the AWS CLI or the s3 ls command again with the aws-shell. The name of the bucket that was deleted should no longer appear in the list.

    Note

    You don't have to delete the bucket if you want to keep using it. For more information, see Add an Object to a Bucket in the Amazon Simple Storage Service User Guide. See also s3 commands in the AWS CLI Command Reference. (Remember, if you don't delete the bucket, it might result in ongoing charges to your AWS account.)

To continue experimenting with the AWS CLI, see Working with Amazon Web Services in the AWS Command Line Interface User Guide as well as the AWS CLI Command Reference. To continue experimenting with the aws-shell, see the AWS CLI Command Reference, noting that you start commands without the aws prefix.

Step 4: Clean up

If you're using the aws-shell, you can stop using it by running the .exit or .quit command.

To prevent ongoing charges to your AWS account after you're done using this sample, you should delete the environment. For instructions, see Deleting an environment in AWS Cloud9.