CfnGlobalTableProps

class aws_cdk.aws_dynamodb.CfnGlobalTableProps(*, attribute_definitions, key_schema, replicas, billing_mode=None, global_secondary_indexes=None, local_secondary_indexes=None, sse_specification=None, stream_specification=None, table_name=None, time_to_live_specification=None, warm_throughput=None, write_on_demand_throughput_settings=None, write_provisioned_throughput_settings=None)

Bases: object

Properties for defining a CfnGlobalTable.

Parameters:

attribute_definitions (Union[IResolvable, Sequence[Union[IResolvable, AttributeDefinitionProperty, Dict[str, Any]]]]) – A list of attributes that describe the key schema for the global table and indexes.
key_schema (Union[IResolvable, Sequence[Union[IResolvable, KeySchemaProperty, Dict[str, Any]]]]) – Specifies the attributes that make up the primary key for the table. The attributes in the KeySchema property must also be defined in the AttributeDefinitions property.
replicas (Union[IResolvable, Sequence[Union[IResolvable, ReplicaSpecificationProperty, Dict[str, Any]]]]) – Specifies the list of replicas for your global table. The list must contain at least one element, the region where the stack defining the global table is deployed. For example, if you define your table in a stack deployed to us-east-1, you must have an entry in Replicas with the region us-east-1. You cannot remove the replica in the stack region. .. epigraph:: Adding a replica might take a few minutes for an empty table, or up to several hours for large tables. If you want to add or remove a replica, we recommend submitting an UpdateStack operation containing only that change. If you add or delete a replica during an update, we recommend that you don’t update any other resources. If your stack fails to update and is rolled back while adding a new replica, you might need to manually delete the replica. You can create a new global table with as many replicas as needed. You can add or remove replicas after table creation, but you can only add or remove a single replica in each update.
billing_mode (Optional[str]) – Specifies how you are charged for read and write throughput and how you manage capacity. Valid values are:. - PAY_PER_REQUEST - PROVISIONED All replicas in your global table will have the same billing mode. If you use PROVISIONED billing mode, you must provide an auto scaling configuration via the WriteProvisionedThroughputSettings property. The default value of this property is PROVISIONED .
global_secondary_indexes (Union[IResolvable, Sequence[Union[IResolvable, GlobalSecondaryIndexProperty, Dict[str, Any]]], None]) – Global secondary indexes to be created on the global table. You can create up to 20 global secondary indexes. Each replica in your global table will have the same global secondary index settings. You can only create or delete one global secondary index in a single stack operation. Since the backfilling of an index could take a long time, CloudFormation does not wait for the index to become active. If a stack operation rolls back, CloudFormation might not delete an index that has been added. In that case, you will need to delete the index manually.
local_secondary_indexes (Union[IResolvable, Sequence[Union[IResolvable, LocalSecondaryIndexProperty, Dict[str, Any]]], None]) – Local secondary indexes to be created on the table. You can create up to five local secondary indexes. Each index is scoped to a given hash key value. The size of each hash key can be up to 10 gigabytes. Each replica in your global table will have the same local secondary index settings.
sse_specification (Union[IResolvable, SSESpecificationProperty, Dict[str, Any], None]) – Specifies the settings to enable server-side encryption. These settings will be applied to all replicas. If you plan to use customer-managed KMS keys, you must provide a key for each replica using the ReplicaSpecification.ReplicaSSESpecification property.
stream_specification (Union[IResolvable, StreamSpecificationProperty, Dict[str, Any], None]) – Specifies the streams settings on your global table. You must provide a value for this property if your global table contains more than one replica. You can only change the streams settings if your global table has only one replica.
table_name (Optional[str]) – A name for the global table. If you don’t specify a name, AWS CloudFormation generates a unique ID and uses that ID as the table name. For more information, see Name type . .. epigraph:: If you specify a name, you cannot perform updates that require replacement of this resource. You can perform updates that require no or some interruption. If you must replace the resource, specify a new name.
time_to_live_specification (Union[IResolvable, TimeToLiveSpecificationProperty, Dict[str, Any], None]) – Specifies the time to live (TTL) settings for the table. This setting will be applied to all replicas.
warm_throughput (Union[IResolvable, WarmThroughputProperty, Dict[str, Any], None]) – Provides visibility into the number of read and write operations your table or secondary index can instantaneously support. The settings can be modified using the UpdateTable operation to meet the throughput requirements of an upcoming peak event.
write_on_demand_throughput_settings (Union[IResolvable, WriteOnDemandThroughputSettingsProperty, Dict[str, Any], None]) – Sets the write request settings for a global table or a global secondary index. You can only specify this setting if your resource uses the PAY_PER_REQUEST BillingMode .
write_provisioned_throughput_settings (Union[IResolvable, WriteProvisionedThroughputSettingsProperty, Dict[str, Any], None]) – Specifies an auto scaling policy for write capacity. This policy will be applied to all replicas. This setting must be specified if BillingMode is set to PROVISIONED .

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_dynamodb as dynamodb

# policy_document: Any

cfn_global_table_props = dynamodb.CfnGlobalTableProps(
    attribute_definitions=[dynamodb.CfnGlobalTable.AttributeDefinitionProperty(
        attribute_name="attributeName",
        attribute_type="attributeType"
    )],
    key_schema=[dynamodb.CfnGlobalTable.KeySchemaProperty(
        attribute_name="attributeName",
        key_type="keyType"
    )],
    replicas=[dynamodb.CfnGlobalTable.ReplicaSpecificationProperty(
        region="region",

        # the properties below are optional
        contributor_insights_specification=dynamodb.CfnGlobalTable.ContributorInsightsSpecificationProperty(
            enabled=False
        ),
        deletion_protection_enabled=False,
        global_secondary_indexes=[dynamodb.CfnGlobalTable.ReplicaGlobalSecondaryIndexSpecificationProperty(
            index_name="indexName",

            # the properties below are optional
            contributor_insights_specification=dynamodb.CfnGlobalTable.ContributorInsightsSpecificationProperty(
                enabled=False
            ),
            read_on_demand_throughput_settings=dynamodb.CfnGlobalTable.ReadOnDemandThroughputSettingsProperty(
                max_read_request_units=123
            ),
            read_provisioned_throughput_settings=dynamodb.CfnGlobalTable.ReadProvisionedThroughputSettingsProperty(
                read_capacity_auto_scaling_settings=dynamodb.CfnGlobalTable.CapacityAutoScalingSettingsProperty(
                    max_capacity=123,
                    min_capacity=123,
                    target_tracking_scaling_policy_configuration=dynamodb.CfnGlobalTable.TargetTrackingScalingPolicyConfigurationProperty(
                        target_value=123,

                        # the properties below are optional
                        disable_scale_in=False,
                        scale_in_cooldown=123,
                        scale_out_cooldown=123
                    ),

                    # the properties below are optional
                    seed_capacity=123
                ),
                read_capacity_units=123
            )
        )],
        kinesis_stream_specification=dynamodb.CfnGlobalTable.KinesisStreamSpecificationProperty(
            stream_arn="streamArn",

            # the properties below are optional
            approximate_creation_date_time_precision="approximateCreationDateTimePrecision"
        ),
        point_in_time_recovery_specification=dynamodb.CfnGlobalTable.PointInTimeRecoverySpecificationProperty(
            point_in_time_recovery_enabled=False
        ),
        read_on_demand_throughput_settings=dynamodb.CfnGlobalTable.ReadOnDemandThroughputSettingsProperty(
            max_read_request_units=123
        ),
        read_provisioned_throughput_settings=dynamodb.CfnGlobalTable.ReadProvisionedThroughputSettingsProperty(
            read_capacity_auto_scaling_settings=dynamodb.CfnGlobalTable.CapacityAutoScalingSettingsProperty(
                max_capacity=123,
                min_capacity=123,
                target_tracking_scaling_policy_configuration=dynamodb.CfnGlobalTable.TargetTrackingScalingPolicyConfigurationProperty(
                    target_value=123,

                    # the properties below are optional
                    disable_scale_in=False,
                    scale_in_cooldown=123,
                    scale_out_cooldown=123
                ),

                # the properties below are optional
                seed_capacity=123
            ),
            read_capacity_units=123
        ),
        replica_stream_specification=dynamodb.CfnGlobalTable.ReplicaStreamSpecificationProperty(
            resource_policy=dynamodb.CfnGlobalTable.ResourcePolicyProperty(
                policy_document=policy_document
            )
        ),
        resource_policy=dynamodb.CfnGlobalTable.ResourcePolicyProperty(
            policy_document=policy_document
        ),
        sse_specification=dynamodb.CfnGlobalTable.ReplicaSSESpecificationProperty(
            kms_master_key_id="kmsMasterKeyId"
        ),
        table_class="tableClass",
        tags=[CfnTag(
            key="key",
            value="value"
        )]
    )],

    # the properties below are optional
    billing_mode="billingMode",
    global_secondary_indexes=[dynamodb.CfnGlobalTable.GlobalSecondaryIndexProperty(
        index_name="indexName",
        key_schema=[dynamodb.CfnGlobalTable.KeySchemaProperty(
            attribute_name="attributeName",
            key_type="keyType"
        )],
        projection=dynamodb.CfnGlobalTable.ProjectionProperty(
            non_key_attributes=["nonKeyAttributes"],
            projection_type="projectionType"
        ),

        # the properties below are optional
        warm_throughput=dynamodb.CfnGlobalTable.WarmThroughputProperty(
            read_units_per_second=123,
            write_units_per_second=123
        ),
        write_on_demand_throughput_settings=dynamodb.CfnGlobalTable.WriteOnDemandThroughputSettingsProperty(
            max_write_request_units=123
        ),
        write_provisioned_throughput_settings=dynamodb.CfnGlobalTable.WriteProvisionedThroughputSettingsProperty(
            write_capacity_auto_scaling_settings=dynamodb.CfnGlobalTable.CapacityAutoScalingSettingsProperty(
                max_capacity=123,
                min_capacity=123,
                target_tracking_scaling_policy_configuration=dynamodb.CfnGlobalTable.TargetTrackingScalingPolicyConfigurationProperty(
                    target_value=123,

                    # the properties below are optional
                    disable_scale_in=False,
                    scale_in_cooldown=123,
                    scale_out_cooldown=123
                ),

                # the properties below are optional
                seed_capacity=123
            )
        )
    )],
    local_secondary_indexes=[dynamodb.CfnGlobalTable.LocalSecondaryIndexProperty(
        index_name="indexName",
        key_schema=[dynamodb.CfnGlobalTable.KeySchemaProperty(
            attribute_name="attributeName",
            key_type="keyType"
        )],
        projection=dynamodb.CfnGlobalTable.ProjectionProperty(
            non_key_attributes=["nonKeyAttributes"],
            projection_type="projectionType"
        )
    )],
    sse_specification=dynamodb.CfnGlobalTable.SSESpecificationProperty(
        sse_enabled=False,

        # the properties below are optional
        sse_type="sseType"
    ),
    stream_specification=dynamodb.CfnGlobalTable.StreamSpecificationProperty(
        stream_view_type="streamViewType"
    ),
    table_name="tableName",
    time_to_live_specification=dynamodb.CfnGlobalTable.TimeToLiveSpecificationProperty(
        enabled=False,

        # the properties below are optional
        attribute_name="attributeName"
    ),
    warm_throughput=dynamodb.CfnGlobalTable.WarmThroughputProperty(
        read_units_per_second=123,
        write_units_per_second=123
    ),
    write_on_demand_throughput_settings=dynamodb.CfnGlobalTable.WriteOnDemandThroughputSettingsProperty(
        max_write_request_units=123
    ),
    write_provisioned_throughput_settings=dynamodb.CfnGlobalTable.WriteProvisionedThroughputSettingsProperty(
        write_capacity_auto_scaling_settings=dynamodb.CfnGlobalTable.CapacityAutoScalingSettingsProperty(
            max_capacity=123,
            min_capacity=123,
            target_tracking_scaling_policy_configuration=dynamodb.CfnGlobalTable.TargetTrackingScalingPolicyConfigurationProperty(
                target_value=123,

                # the properties below are optional
                disable_scale_in=False,
                scale_in_cooldown=123,
                scale_out_cooldown=123
            ),

            # the properties below are optional
            seed_capacity=123
        )
    )
)

Attributes

attribute_definitions

A list of attributes that describe the key schema for the global table and indexes.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-attributedefinitions

billing_mode

.

PAY_PER_REQUEST
PROVISIONED

All replicas in your global table will have the same billing mode. If you use PROVISIONED billing mode, you must provide an auto scaling configuration via the WriteProvisionedThroughputSettings property. The default value of this property is PROVISIONED .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-billingmode
Type:: Specifies how you are charged for read and write throughput and how you manage capacity. Valid values are

global_secondary_indexes

Global secondary indexes to be created on the global table.

You can create up to 20 global secondary indexes. Each replica in your global table will have the same global secondary index settings. You can only create or delete one global secondary index in a single stack operation.

Since the backfilling of an index could take a long time, CloudFormation does not wait for the index to become active. If a stack operation rolls back, CloudFormation might not delete an index that has been added. In that case, you will need to delete the index manually.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-globalsecondaryindexes

key_schema

Specifies the attributes that make up the primary key for the table.

The attributes in the KeySchema property must also be defined in the AttributeDefinitions property.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-keyschema

local_secondary_indexes

Local secondary indexes to be created on the table.

You can create up to five local secondary indexes. Each index is scoped to a given hash key value. The size of each hash key can be up to 10 gigabytes. Each replica in your global table will have the same local secondary index settings.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-localsecondaryindexes

replicas

Specifies the list of replicas for your global table.

The list must contain at least one element, the region where the stack defining the global table is deployed. For example, if you define your table in a stack deployed to us-east-1, you must have an entry in Replicas with the region us-east-1. You cannot remove the replica in the stack region. .. epigraph:

Adding a replica might take a few minutes for an empty table, or up to several hours for large tables. If you want to add or remove a replica, we recommend submitting an ``UpdateStack`` operation containing only that change.

If you add or delete a replica during an update, we recommend that you don't update any other resources. If your stack fails to update and is rolled back while adding a new replica, you might need to manually delete the replica.

You can create a new global table with as many replicas as needed. You can add or remove replicas after table creation, but you can only add or remove a single replica in each update.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-replicas

sse_specification

Specifies the settings to enable server-side encryption.

These settings will be applied to all replicas. If you plan to use customer-managed KMS keys, you must provide a key for each replica using the ReplicaSpecification.ReplicaSSESpecification property.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-ssespecification

stream_specification

Specifies the streams settings on your global table.

You must provide a value for this property if your global table contains more than one replica. You can only change the streams settings if your global table has only one replica.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-streamspecification

table_name

A name for the global table.

If you don’t specify a name, AWS CloudFormation generates a unique ID and uses that ID as the table name. For more information, see Name type . .. epigraph:

If you specify a name, you cannot perform updates that require replacement of this resource. You can perform updates that require no or some interruption. If you must replace the resource, specify a new name.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-tablename

time_to_live_specification

Specifies the time to live (TTL) settings for the table.

This setting will be applied to all replicas.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-timetolivespecification

warm_throughput

Provides visibility into the number of read and write operations your table or secondary index can instantaneously support.

The settings can be modified using the UpdateTable operation to meet the throughput requirements of an upcoming peak event.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-warmthroughput

write_on_demand_throughput_settings

Sets the write request settings for a global table or a global secondary index.

You can only specify this setting if your resource uses the PAY_PER_REQUEST BillingMode .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-writeondemandthroughputsettings

write_provisioned_throughput_settings

Specifies an auto scaling policy for write capacity.

This policy will be applied to all replicas. This setting must be specified if BillingMode is set to PROVISIONED .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-dynamodb-globaltable.html#cfn-dynamodb-globaltable-writeprovisionedthroughputsettings