Terjemahan disediakan oleh mesin penerjemah. Jika konten terjemahan yang diberikan bertentangan dengan versi bahasa Inggris aslinya, utamakan versi bahasa Inggris.
Langkah 1: Buat tabel di DynamoDB
Pada langkah ini, Anda membuat tabel Music
di Amazon DynamoDB. Tabel ini memiliki detail berikut:
-
Kunci partisi —
Artist
-
Kunci urutan —
SongTitle
Untuk informasi selengkapnya tentang operasi tabel, lihat Bekerja dengan tabel dan data di DynamoDB.
catatan
Sebelum memulai, pastikan Anda mengikuti langkah-langkah dalam Prasyarat.
Untuk membuat tabel Music
baru menggunakan konsol DynamoDB:
Masuk ke AWS Management Console dan buka konsol DynamoDB di. https://console.aws.amazon.com/dynamodb/
-
Di panel navigasi kiri, pilih Tabel.
-
Pilih Buat tabel.
-
Masukkan rincian Tabel sebagai berikut:
-
Untuk Nama tabel, masukkan
Music
. -
Untuk kunci Partisi, masukkan
Artist
. -
Untuk tombol Sortir, masukkan
SongTitle
.
-
-
Untuk pengaturan Tabel, pertahankan pilihan default pengaturan Default.
-
Pilih Buat tabel untuk membuat tabel.
-
Setelah tabel dalam
ACTIVE
status, kami sarankan Anda mengaktifkan oint-in-time Backup P untuk DynamoDB di atas meja dengan melakukan langkah-langkah berikut:-
Pilih nama tabel untuk membuka tabel.
-
Pilih Backup.
-
Pilih Edit di bagian Point-in-time pemulihan (PITR).
-
Pada halaman Edit pengaturan point-in-time pemulihan, pilih Aktifkan point-in-time pemulihan.
-
Pilih Simpan perubahan.
-
AWS CLI Contoh berikut membuat Music
tabel baru menggunakancreate-table
.
Linux
aws dynamodb create-table \ --table-name Music \ --attribute-definitions \ AttributeName=Artist,AttributeType=S \ AttributeName=SongTitle,AttributeType=S \ --key-schema \ AttributeName=Artist,KeyType=HASH \ AttributeName=SongTitle,KeyType=RANGE \ --provisioned-throughput \ ReadCapacityUnits=5,WriteCapacityUnits=5 \ --table-class STANDARD
Jendela CMD
aws dynamodb create-table ^ --table-name Music ^ --attribute-definitions ^ AttributeName=Artist,AttributeType=S ^ AttributeName=SongTitle,AttributeType=S ^ --key-schema ^ AttributeName=Artist,KeyType=HASH ^ AttributeName=SongTitle,KeyType=RANGE ^ --provisioned-throughput ^ ReadCapacityUnits=5,WriteCapacityUnits=5 ^ --table-class STANDARD
Menggunakan create-table
akan menampilkan hasil sampel berikut.
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "Artist", "AttributeType": "S" }, { "AttributeName": "SongTitle", "AttributeType": "S" } ], "TableName": "Music", "KeySchema": [ { "AttributeName": "Artist", "KeyType": "HASH" }, { "AttributeName": "SongTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2023-03-29T12:11:43.379000-04:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 5, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-east-1:111122223333:table/Music", "TableId": "60abf404-1839-4917-a89b-a8b0ab2a1b87", "TableClassSummary": { "TableClass": "STANDARD" } } } }
Perhatikan bahwa nilai bidang TableStatus
diatur ke CREATING
.
Untuk memverifikasi bahwa DynamoDB selesai membuat tabel Music
, gunakan perintah describe-table
.
Linux
aws dynamodb describe-table --table-name Music | grep TableStatus
Jendela CMD
aws dynamodb describe-table --table-name Music | findstr TableStatus
Perintah ini akan menampilkan hasil berikut. Setelah DynamoDB selesai membuat tabel, nilai bidang TableStatus
diatur ke ACTIVE
.
"TableStatus": "ACTIVE",
Setelah tabel berstatus ACTIVE
, praktik terbaiknya adalah mengaktifkan oint-in-time Backup P untuk DynamoDB pada tabel dengan menjalankan perintah berikut:
Linux
aws dynamodb update-continuous-backups \ --table-name Music \ --point-in-time-recovery-specification \ PointInTimeRecoveryEnabled=true
Jendela CMD
aws dynamodb update-continuous-backups --table-name Music --point-in-time-recovery-specification PointInTimeRecoveryEnabled=true
Perintah ini akan menampilkan hasil berikut.
{ "ContinuousBackupsDescription": { "ContinuousBackupsStatus": "ENABLED", "PointInTimeRecoveryDescription": { "PointInTimeRecoveryStatus": "ENABLED", "EarliestRestorableDateTime": "2023-03-29T12:18:19-04:00", "LatestRestorableDateTime": "2023-03-29T12:18:19-04:00" } } }
catatan
Ada implikasi biaya untuk memungkinkan pencadangan berkelanjutan dengan pemulihan. point-in-time Untuk informasi selengkapnya tentang harga, lihat Harga Amazon DynamoDB
Contoh kode berikut menunjukkan cara membuat tabel DynamoDB menggunakan tabel. AWS SDK
- .NET
-
- AWS SDK for .NET
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. /// <summary> /// Creates a new Amazon DynamoDB table and then waits for the new /// table to become active. /// </summary> /// <param name="client">An initialized Amazon DynamoDB client object.</param> /// <param name="tableName">The name of the table to create.</param> /// <returns>A Boolean value indicating the success of the operation.</returns> public static async Task<bool> CreateMovieTableAsync(AmazonDynamoDBClient client, string tableName) { var response = await client.CreateTableAsync(new CreateTableRequest { TableName = tableName, AttributeDefinitions = new List<AttributeDefinition>() { new AttributeDefinition { AttributeName = "title", AttributeType = ScalarAttributeType.S, }, new AttributeDefinition { AttributeName = "year", AttributeType = ScalarAttributeType.N, }, }, KeySchema = new List<KeySchemaElement>() { new KeySchemaElement { AttributeName = "year", KeyType = KeyType.HASH, }, new KeySchemaElement { AttributeName = "title", KeyType = KeyType.RANGE, }, }, ProvisionedThroughput = new ProvisionedThroughput { ReadCapacityUnits = 5, WriteCapacityUnits = 5, }, }); // Wait until the table is ACTIVE and then report success. Console.Write("Waiting for table to become active..."); var request = new DescribeTableRequest { TableName = response.TableDescription.TableName, }; TableStatus status; int sleepDuration = 2000; do { System.Threading.Thread.Sleep(sleepDuration); var describeTableResponse = await client.DescribeTableAsync(request); status = describeTableResponse.Table.TableStatus; Console.Write("."); } while (status != "ACTIVE"); return status == TableStatus.ACTIVE; }
-
Untuk API detailnya, lihat CreateTabledi AWS SDK for .NET APIReferensi.
-
- Bash
-
- AWS CLI dengan skrip Bash
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. ############################################################################### # function dynamodb_create_table # # This function creates an Amazon DynamoDB table. # # Parameters: # -n table_name -- The name of the table to create. # -a attribute_definitions -- JSON file path of a list of attributes and their types. # -k key_schema -- JSON file path of a list of attributes and their key types. # -p provisioned_throughput -- Provisioned throughput settings for the table. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_create_table() { local table_name attribute_definitions key_schema provisioned_throughput response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_create_table" echo "Creates an Amazon DynamoDB table." echo " -n table_name -- The name of the table to create." echo " -a attribute_definitions -- JSON file path of a list of attributes and their types." echo " -k key_schema -- JSON file path of a list of attributes and their key types." echo " -p provisioned_throughput -- Provisioned throughput settings for the table." echo "" } # Retrieve the calling parameters. while getopts "n:a:k:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; a) attribute_definitions="${OPTARG}" ;; k) key_schema="${OPTARG}" ;; p) provisioned_throughput="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$attribute_definitions" ]]; then errecho "ERROR: You must provide an attribute definitions json file path the -a parameter." usage return 1 fi if [[ -z "$key_schema" ]]; then errecho "ERROR: You must provide a key schema json file path the -k parameter." usage return 1 fi if [[ -z "$provisioned_throughput" ]]; then errecho "ERROR: You must provide a provisioned throughput json file path the -p parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " attribute_definitions: $attribute_definitions" iecho " key_schema: $key_schema" iecho " provisioned_throughput: $provisioned_throughput" iecho "" response=$(aws dynamodb create-table \ --table-name "$table_name" \ --attribute-definitions file://"$attribute_definitions" \ --key-schema file://"$key_schema" \ --provisioned-throughput "$provisioned_throughput") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports create-table operation failed.$response" return 1 fi return 0 }
Fungsi utilitas yang digunakan dalam contoh ini.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }
-
Untuk API detailnya, lihat CreateTabledi Referensi AWS CLI Perintah.
-
- C++
-
- SDKuntuk C ++
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. //! Create an Amazon DynamoDB table. /*! \sa createTable() \param tableName: Name for the DynamoDB table. \param primaryKey: Primary key for the DynamoDB table. \param clientConfiguration: AWS client configuration. \return bool: Function succeeded. */ bool AwsDoc::DynamoDB::createTable(const Aws::String &tableName, const Aws::String &primaryKey, const Aws::Client::ClientConfiguration &clientConfiguration) { Aws::DynamoDB::DynamoDBClient dynamoClient(clientConfiguration); std::cout << "Creating table " << tableName << " with a simple primary key: \"" << primaryKey << "\"." << std::endl; Aws::DynamoDB::Model::CreateTableRequest request; Aws::DynamoDB::Model::AttributeDefinition hashKey; hashKey.SetAttributeName(primaryKey); hashKey.SetAttributeType(Aws::DynamoDB::Model::ScalarAttributeType::S); request.AddAttributeDefinitions(hashKey); Aws::DynamoDB::Model::KeySchemaElement keySchemaElement; keySchemaElement.WithAttributeName(primaryKey).WithKeyType( Aws::DynamoDB::Model::KeyType::HASH); request.AddKeySchema(keySchemaElement); Aws::DynamoDB::Model::ProvisionedThroughput throughput; throughput.WithReadCapacityUnits(5).WithWriteCapacityUnits(5); request.SetProvisionedThroughput(throughput); request.SetTableName(tableName); const Aws::DynamoDB::Model::CreateTableOutcome &outcome = dynamoClient.CreateTable( request); if (outcome.IsSuccess()) { std::cout << "Table \"" << outcome.GetResult().GetTableDescription().GetTableName() << " created!" << std::endl; } else { std::cerr << "Failed to create table: " << outcome.GetError().GetMessage() << std::endl; return false; } return waitTableActive(tableName, dynamoClient); }
Kode yang menunggu tabel menjadi aktif.
//! Query a newly created DynamoDB table until it is active. /*! \sa waitTableActive() \param waitTableActive: The DynamoDB table's name. \param dynamoClient: A DynamoDB client. \return bool: Function succeeded. */ bool AwsDoc::DynamoDB::waitTableActive(const Aws::String &tableName, const Aws::DynamoDB::DynamoDBClient &dynamoClient) { // Repeatedly call DescribeTable until table is ACTIVE. const int MAX_QUERIES = 20; Aws::DynamoDB::Model::DescribeTableRequest request; request.SetTableName(tableName); int count = 0; while (count < MAX_QUERIES) { const Aws::DynamoDB::Model::DescribeTableOutcome &result = dynamoClient.DescribeTable( request); if (result.IsSuccess()) { Aws::DynamoDB::Model::TableStatus status = result.GetResult().GetTable().GetTableStatus(); if (Aws::DynamoDB::Model::TableStatus::ACTIVE != status) { std::this_thread::sleep_for(std::chrono::seconds(1)); } else { return true; } } else { std::cerr << "Error DynamoDB::waitTableActive " << result.GetError().GetMessage() << std::endl; return false; } count++; } return false; }
-
Untuk API detailnya, lihat CreateTabledi AWS SDK for C++ APIReferensi.
-
- CLI
-
- AWS CLI
-
Contoh 1: Untuk membuat tabel dengan tag
create-table
Contoh berikut menggunakan atribut tertentu dan skema kunci untuk membuat tabel bernamaMusicCollection
. Tabel ini menggunakan throughput yang disediakan dan dienkripsi saat istirahat menggunakan default yang dimiliki. AWS CMK Perintah ini juga menerapkan tag ke tabel, dengan kunci dariOwner
dan nilaiblueTeam
.aws dynamodb create-table \ --table-name
MusicCollection
\ --attribute-definitionsAttributeName=Artist,AttributeType=S
AttributeName=SongTitle,AttributeType=S
\ --key-schemaAttributeName=Artist,KeyType=HASH
AttributeName=SongTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=5,WriteCapacityUnits=5
\ --tagsKey=Owner,Value=blueTeam
Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "Artist", "AttributeType": "S" }, { "AttributeName": "SongTitle", "AttributeType": "S" } ], "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "WriteCapacityUnits": 5, "ReadCapacityUnits": 5 }, "TableSizeBytes": 0, "TableName": "MusicCollection", "TableStatus": "CREATING", "KeySchema": [ { "KeyType": "HASH", "AttributeName": "Artist" }, { "KeyType": "RANGE", "AttributeName": "SongTitle" } ], "ItemCount": 0, "CreationDateTime": "2020-05-26T16:04:41.627000-07:00", "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" } }
Untuk informasi selengkapnya, lihat Operasi Dasar untuk Tabel dalam Panduan Developer Amazon DynamoDB.
Contoh 2: Untuk membuat tabel dalam Mode On-Demand
Contoh berikut membuat tabel yang disebut
MusicCollection
menggunakan mode on-demand, bukan mode throughput yang disediakan. Ini berguna untuk tabel dengan beban kerja yang tidak terduga.aws dynamodb create-table \ --table-name
MusicCollection
\ --attribute-definitionsAttributeName=Artist,AttributeType=S
AttributeName=SongTitle,AttributeType=S
\ --key-schemaAttributeName=Artist,KeyType=HASH
AttributeName=SongTitle,KeyType=RANGE
\ --billing-modePAY_PER_REQUEST
Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "Artist", "AttributeType": "S" }, { "AttributeName": "SongTitle", "AttributeType": "S" } ], "TableName": "MusicCollection", "KeySchema": [ { "AttributeName": "Artist", "KeyType": "HASH" }, { "AttributeName": "SongTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2020-05-27T11:44:10.807000-07:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 0, "WriteCapacityUnits": 0 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "BillingModeSummary": { "BillingMode": "PAY_PER_REQUEST" } } }
Untuk informasi selengkapnya, lihat Operasi Dasar untuk Tabel dalam Panduan Developer Amazon DynamoDB.
Contoh 3: Untuk membuat tabel dan mengenkripsi dengan Customer Managed CMK
Contoh berikut membuat tabel bernama
MusicCollection
dan mengenkripsi menggunakan pelanggan yang dikelola. CMKaws dynamodb create-table \ --table-name
MusicCollection
\ --attribute-definitionsAttributeName=Artist,AttributeType=S
AttributeName=SongTitle,AttributeType=S
\ --key-schemaAttributeName=Artist,KeyType=HASH
AttributeName=SongTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=5,WriteCapacityUnits=5
\ --sse-specificationEnabled=true,SSEType=KMS,KMSMasterKeyId=abcd1234-abcd-1234-a123-ab1234a1b234
Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "Artist", "AttributeType": "S" }, { "AttributeName": "SongTitle", "AttributeType": "S" } ], "TableName": "MusicCollection", "KeySchema": [ { "AttributeName": "Artist", "KeyType": "HASH" }, { "AttributeName": "SongTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2020-05-27T11:12:16.431000-07:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 5, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "SSEDescription": { "Status": "ENABLED", "SSEType": "KMS", "KMSMasterKeyArn": "arn:aws:kms:us-west-2:123456789012:key/abcd1234-abcd-1234-a123-ab1234a1b234" } } }
Untuk informasi selengkapnya, lihat Operasi Dasar untuk Tabel dalam Panduan Developer Amazon DynamoDB.
Contoh 4: Untuk membuat tabel dengan Indeks Sekunder Lokal
Contoh berikut menggunakan atribut tertentu dan skema kunci untuk membuat tabel bernama
MusicCollection
dengan Indeks Sekunder Lokal bernamaAlbumTitleIndex
.aws dynamodb create-table \ --table-name
MusicCollection
\ --attribute-definitionsAttributeName=Artist,AttributeType=S
AttributeName=SongTitle,AttributeType=S
AttributeName=AlbumTitle,AttributeType=S
\ --key-schemaAttributeName=Artist,KeyType=HASH
AttributeName=SongTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=10,WriteCapacityUnits=5
\ --local-secondary-indexes \ "[ { \"IndexName\": \"AlbumTitleIndex\", \"KeySchema\": [ {\"AttributeName\": \"Artist\",\"KeyType\":\"HASH\"}, {\"AttributeName\": \"AlbumTitle\",\"KeyType\":\"RANGE\"} ], \"Projection\": { \"ProjectionType\": \"INCLUDE\", \"NonKeyAttributes\": [\"Genre\", \"Year\"] } } ]"Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "AlbumTitle", "AttributeType": "S" }, { "AttributeName": "Artist", "AttributeType": "S" }, { "AttributeName": "SongTitle", "AttributeType": "S" } ], "TableName": "MusicCollection", "KeySchema": [ { "AttributeName": "Artist", "KeyType": "HASH" }, { "AttributeName": "SongTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2020-05-26T15:59:49.473000-07:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "LocalSecondaryIndexes": [ { "IndexName": "AlbumTitleIndex", "KeySchema": [ { "AttributeName": "Artist", "KeyType": "HASH" }, { "AttributeName": "AlbumTitle", "KeyType": "RANGE" } ], "Projection": { "ProjectionType": "INCLUDE", "NonKeyAttributes": [ "Genre", "Year" ] }, "IndexSizeBytes": 0, "ItemCount": 0, "IndexArn": "arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection/index/AlbumTitleIndex" } ] } }
Untuk informasi selengkapnya, lihat Operasi Dasar untuk Tabel dalam Panduan Developer Amazon DynamoDB.
Contoh 5: Untuk membuat tabel dengan Indeks Sekunder Global
Contoh berikut membuat tabel bernama
GameScores
dengan Global Secondary Index disebutGameTitleIndex
. Tabel dasar memiliki kunci partisiUserId
dan semacam kunciGameTitle
, memungkinkan Anda untuk menemukan skor terbaik pengguna individu untuk permainan tertentu secara efisien, sedangkan GSI memiliki kunci partisiGameTitle
dan semacam kunciTopScore
, memungkinkan Anda untuk dengan cepat menemukan skor tertinggi keseluruhan untuk permainan tertentu.aws dynamodb create-table \ --table-name
GameScores
\ --attribute-definitionsAttributeName=UserId,AttributeType=S
AttributeName=GameTitle,AttributeType=S
AttributeName=TopScore,AttributeType=N
\ --key-schemaAttributeName=UserId,KeyType=HASH
\AttributeName=GameTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=10,WriteCapacityUnits=5
\ --global-secondary-indexes \ "[ { \"IndexName\": \"GameTitleIndex\", \"KeySchema\": [ {\"AttributeName\":\"GameTitle\",\"KeyType\":\"HASH\"}, {\"AttributeName\":\"TopScore\",\"KeyType\":\"RANGE\"} ], \"Projection\": { \"ProjectionType\":\"INCLUDE\", \"NonKeyAttributes\":[\"UserId\"] }, \"ProvisionedThroughput\": { \"ReadCapacityUnits\": 10, \"WriteCapacityUnits\": 5 } } ]"Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "GameTitle", "AttributeType": "S" }, { "AttributeName": "TopScore", "AttributeType": "N" }, { "AttributeName": "UserId", "AttributeType": "S" } ], "TableName": "GameScores", "KeySchema": [ { "AttributeName": "UserId", "KeyType": "HASH" }, { "AttributeName": "GameTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2020-05-26T17:28:15.602000-07:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "GlobalSecondaryIndexes": [ { "IndexName": "GameTitleIndex", "KeySchema": [ { "AttributeName": "GameTitle", "KeyType": "HASH" }, { "AttributeName": "TopScore", "KeyType": "RANGE" } ], "Projection": { "ProjectionType": "INCLUDE", "NonKeyAttributes": [ "UserId" ] }, "IndexStatus": "CREATING", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "IndexSizeBytes": 0, "ItemCount": 0, "IndexArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores/index/GameTitleIndex" } ] } }
Untuk informasi selengkapnya, lihat Operasi Dasar untuk Tabel dalam Panduan Developer Amazon DynamoDB.
Contoh 6: Untuk membuat tabel dengan beberapa Indeks Sekunder Global sekaligus
Contoh berikut membuat tabel bernama
GameScores
dengan dua Global Secondary Indexes. GSISkema dilewatkan melalui file, bukan pada baris perintah.aws dynamodb create-table \ --table-name
GameScores
\ --attribute-definitionsAttributeName=UserId,AttributeType=S
AttributeName=GameTitle,AttributeType=S
AttributeName=TopScore,AttributeType=N
AttributeName=Date,AttributeType=S
\ --key-schemaAttributeName=UserId,KeyType=HASH
AttributeName=GameTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=10,WriteCapacityUnits=5
\ --global-secondary-indexesfile://gsi.json
Isi dari
gsi.json
:[ { "IndexName": "GameTitleIndex", "KeySchema": [ { "AttributeName": "GameTitle", "KeyType": "HASH" }, { "AttributeName": "TopScore", "KeyType": "RANGE" } ], "Projection": { "ProjectionType": "ALL" }, "ProvisionedThroughput": { "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 } }, { "IndexName": "GameDateIndex", "KeySchema": [ { "AttributeName": "GameTitle", "KeyType": "HASH" }, { "AttributeName": "Date", "KeyType": "RANGE" } ], "Projection": { "ProjectionType": "ALL" }, "ProvisionedThroughput": { "ReadCapacityUnits": 5, "WriteCapacityUnits": 5 } } ]
Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "Date", "AttributeType": "S" }, { "AttributeName": "GameTitle", "AttributeType": "S" }, { "AttributeName": "TopScore", "AttributeType": "N" }, { "AttributeName": "UserId", "AttributeType": "S" } ], "TableName": "GameScores", "KeySchema": [ { "AttributeName": "UserId", "KeyType": "HASH" }, { "AttributeName": "GameTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2020-08-04T16:40:55.524000-07:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "GlobalSecondaryIndexes": [ { "IndexName": "GameTitleIndex", "KeySchema": [ { "AttributeName": "GameTitle", "KeyType": "HASH" }, { "AttributeName": "TopScore", "KeyType": "RANGE" } ], "Projection": { "ProjectionType": "ALL" }, "IndexStatus": "CREATING", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "IndexSizeBytes": 0, "ItemCount": 0, "IndexArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores/index/GameTitleIndex" }, { "IndexName": "GameDateIndex", "KeySchema": [ { "AttributeName": "GameTitle", "KeyType": "HASH" }, { "AttributeName": "Date", "KeyType": "RANGE" } ], "Projection": { "ProjectionType": "ALL" }, "IndexStatus": "CREATING", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 5, "WriteCapacityUnits": 5 }, "IndexSizeBytes": 0, "ItemCount": 0, "IndexArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores/index/GameDateIndex" } ] } }
Untuk informasi selengkapnya, lihat Operasi Dasar untuk Tabel dalam Panduan Developer Amazon DynamoDB.
Contoh 7: Untuk membuat tabel dengan Streams diaktifkan
Contoh berikut membuat tabel yang disebut
GameScores
dengan DynamoDB Streams diaktifkan. Baik gambar baru dan lama dari setiap item akan ditulis ke aliran.aws dynamodb create-table \ --table-name
GameScores
\ --attribute-definitionsAttributeName=UserId,AttributeType=S
AttributeName=GameTitle,AttributeType=S
\ --key-schemaAttributeName=UserId,KeyType=HASH
AttributeName=GameTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=10,WriteCapacityUnits=5
\ --stream-specificationStreamEnabled=TRUE,StreamViewType=NEW_AND_OLD_IMAGES
Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "GameTitle", "AttributeType": "S" }, { "AttributeName": "UserId", "AttributeType": "S" } ], "TableName": "GameScores", "KeySchema": [ { "AttributeName": "UserId", "KeyType": "HASH" }, { "AttributeName": "GameTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2020-05-27T10:49:34.056000-07:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "StreamSpecification": { "StreamEnabled": true, "StreamViewType": "NEW_AND_OLD_IMAGES" }, "LatestStreamLabel": "2020-05-27T17:49:34.056", "LatestStreamArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores/stream/2020-05-27T17:49:34.056" } }
Untuk informasi selengkapnya, lihat Operasi Dasar untuk Tabel dalam Panduan Developer Amazon DynamoDB.
Contoh 8: Untuk membuat tabel dengan Keys-Only Stream diaktifkan
Contoh berikut membuat tabel yang disebut
GameScores
dengan DynamoDB Streams diaktifkan. Hanya atribut kunci dari item yang dimodifikasi yang ditulis ke aliran.aws dynamodb create-table \ --table-name
GameScores
\ --attribute-definitionsAttributeName=UserId,AttributeType=S
AttributeName=GameTitle,AttributeType=S
\ --key-schemaAttributeName=UserId,KeyType=HASH
AttributeName=GameTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=10,WriteCapacityUnits=5
\ --stream-specificationStreamEnabled=TRUE,StreamViewType=KEYS_ONLY
Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "GameTitle", "AttributeType": "S" }, { "AttributeName": "UserId", "AttributeType": "S" } ], "TableName": "GameScores", "KeySchema": [ { "AttributeName": "UserId", "KeyType": "HASH" }, { "AttributeName": "GameTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2023-05-25T18:45:34.140000+00:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "StreamSpecification": { "StreamEnabled": true, "StreamViewType": "KEYS_ONLY" }, "LatestStreamLabel": "2023-05-25T18:45:34.140", "LatestStreamArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores/stream/2023-05-25T18:45:34.140", "DeletionProtectionEnabled": false } }
Untuk informasi selengkapnya, lihat Mengubah pengambilan data untuk DynamoDB Streams di Panduan Pengembang Amazon DynamoDB.
Contoh 9: Untuk membuat tabel dengan kelas Standard Infrequent Access
Contoh berikut membuat tabel yang disebut
GameScores
dan menetapkan kelas tabel Standard-Infrequent Access (DynamoDB Standard-IA). Kelas tabel ini dioptimalkan untuk penyimpanan menjadi biaya dominan.aws dynamodb create-table \ --table-name
GameScores
\ --attribute-definitionsAttributeName=UserId,AttributeType=S
AttributeName=GameTitle,AttributeType=S
\ --key-schemaAttributeName=UserId,KeyType=HASH
AttributeName=GameTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=10,WriteCapacityUnits=5
\ --table-classSTANDARD_INFREQUENT_ACCESS
Output:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "GameTitle", "AttributeType": "S" }, { "AttributeName": "UserId", "AttributeType": "S" } ], "TableName": "GameScores", "KeySchema": [ { "AttributeName": "UserId", "KeyType": "HASH" }, { "AttributeName": "GameTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2023-05-25T18:33:07.581000+00:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "TableClassSummary": { "TableClass": "STANDARD_INFREQUENT_ACCESS" }, "DeletionProtectionEnabled": false } }
Untuk informasi selengkapnya, lihat Kelas tabel di Panduan Pengembang Amazon DynamoDB.
Contoh 10: Membuat tabel dengan Hapus Perlindungan diaktifkan
Contoh berikut membuat tabel yang disebut
GameScores
dan memungkinkan perlindungan penghapusan.aws dynamodb create-table \ --table-name
GameScores
\ --attribute-definitionsAttributeName=UserId,AttributeType=S
AttributeName=GameTitle,AttributeType=S
\ --key-schemaAttributeName=UserId,KeyType=HASH
AttributeName=GameTitle,KeyType=RANGE
\ --provisioned-throughputReadCapacityUnits=10,WriteCapacityUnits=5
\ --deletion-protection-enabledOutput:
{ "TableDescription": { "AttributeDefinitions": [ { "AttributeName": "GameTitle", "AttributeType": "S" }, { "AttributeName": "UserId", "AttributeType": "S" } ], "TableName": "GameScores", "KeySchema": [ { "AttributeName": "UserId", "KeyType": "HASH" }, { "AttributeName": "GameTitle", "KeyType": "RANGE" } ], "TableStatus": "CREATING", "CreationDateTime": "2023-05-25T23:02:17.093000+00:00", "ProvisionedThroughput": { "NumberOfDecreasesToday": 0, "ReadCapacityUnits": 10, "WriteCapacityUnits": 5 }, "TableSizeBytes": 0, "ItemCount": 0, "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/GameScores", "TableId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "DeletionProtectionEnabled": true } }
Untuk informasi selengkapnya, lihat Menggunakan perlindungan penghapusan di Panduan Pengembang Amazon DynamoDB.
-
Untuk API detailnya, lihat CreateTable
di Referensi AWS CLI Perintah.
-
- Go
-
- SDKuntuk Go V2
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. // TableBasics encapsulates the Amazon DynamoDB service actions used in the examples. // It contains a DynamoDB service client that is used to act on the specified table. type TableBasics struct { DynamoDbClient *dynamodb.Client TableName string } // CreateMovieTable creates a DynamoDB table with a composite primary key defined as // a string sort key named `title`, and a numeric partition key named `year`. // This function uses NewTableExistsWaiter to wait for the table to be created by // DynamoDB before it returns. func (basics TableBasics) CreateMovieTable(ctx context.Context) (*types.TableDescription, error) { var tableDesc *types.TableDescription table, err := basics.DynamoDbClient.CreateTable(ctx, &dynamodb.CreateTableInput{ AttributeDefinitions: []types.AttributeDefinition{{ AttributeName: aws.String("year"), AttributeType: types.ScalarAttributeTypeN, }, { AttributeName: aws.String("title"), AttributeType: types.ScalarAttributeTypeS, }}, KeySchema: []types.KeySchemaElement{{ AttributeName: aws.String("year"), KeyType: types.KeyTypeHash, }, { AttributeName: aws.String("title"), KeyType: types.KeyTypeRange, }}, TableName: aws.String(basics.TableName), ProvisionedThroughput: &types.ProvisionedThroughput{ ReadCapacityUnits: aws.Int64(10), WriteCapacityUnits: aws.Int64(10), }, }) if err != nil { log.Printf("Couldn't create table %v. Here's why: %v\n", basics.TableName, err) } else { waiter := dynamodb.NewTableExistsWaiter(basics.DynamoDbClient) err = waiter.Wait(ctx, &dynamodb.DescribeTableInput{ TableName: aws.String(basics.TableName)}, 5*time.Minute) if err != nil { log.Printf("Wait for table exists failed. Here's why: %v\n", err) } tableDesc = table.TableDescription } return tableDesc, err }
-
Untuk API detailnya, lihat CreateTable
di AWS SDK for Go APIReferensi.
-
- Java
-
- SDKuntuk Java 2.x
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. import software.amazon.awssdk.core.waiters.WaiterResponse; import software.amazon.awssdk.regions.Region; import software.amazon.awssdk.services.dynamodb.DynamoDbClient; import software.amazon.awssdk.services.dynamodb.model.AttributeDefinition; import software.amazon.awssdk.services.dynamodb.model.CreateTableRequest; import software.amazon.awssdk.services.dynamodb.model.CreateTableResponse; import software.amazon.awssdk.services.dynamodb.model.DescribeTableRequest; import software.amazon.awssdk.services.dynamodb.model.DescribeTableResponse; import software.amazon.awssdk.services.dynamodb.model.DynamoDbException; import software.amazon.awssdk.services.dynamodb.model.KeySchemaElement; import software.amazon.awssdk.services.dynamodb.model.KeyType; import software.amazon.awssdk.services.dynamodb.model.ProvisionedThroughput; import software.amazon.awssdk.services.dynamodb.model.ScalarAttributeType; import software.amazon.awssdk.services.dynamodb.waiters.DynamoDbWaiter; /** * Before running this Java V2 code example, set up your development * environment, including your credentials. * * For more information, see the following documentation topic: * * https://docs.aws.amazon.com/sdk-for-java/latest/developer-guide/get-started.html */ public class CreateTable { public static void main(String[] args) { final String usage = """ Usage: <tableName> <key> Where: tableName - The Amazon DynamoDB table to create (for example, Music3). key - The key for the Amazon DynamoDB table (for example, Artist). """; if (args.length != 2) { System.out.println(usage); System.exit(1); } String tableName = args[0]; String key = args[1]; System.out.println("Creating an Amazon DynamoDB table " + tableName + " with a simple primary key: " + key); Region region = Region.US_EAST_1; DynamoDbClient ddb = DynamoDbClient.builder() .region(region) .build(); String result = createTable(ddb, tableName, key); System.out.println("New table is " + result); ddb.close(); } public static String createTable(DynamoDbClient ddb, String tableName, String key) { DynamoDbWaiter dbWaiter = ddb.waiter(); CreateTableRequest request = CreateTableRequest.builder() .attributeDefinitions(AttributeDefinition.builder() .attributeName(key) .attributeType(ScalarAttributeType.S) .build()) .keySchema(KeySchemaElement.builder() .attributeName(key) .keyType(KeyType.HASH) .build()) .provisionedThroughput(ProvisionedThroughput.builder() .readCapacityUnits(10L) .writeCapacityUnits(10L) .build()) .tableName(tableName) .build(); String newTable; try { CreateTableResponse response = ddb.createTable(request); DescribeTableRequest tableRequest = DescribeTableRequest.builder() .tableName(tableName) .build(); // Wait until the Amazon DynamoDB table is created. WaiterResponse<DescribeTableResponse> waiterResponse = dbWaiter.waitUntilTableExists(tableRequest); waiterResponse.matched().response().ifPresent(System.out::println); newTable = response.tableDescription().tableName(); return newTable; } catch (DynamoDbException e) { System.err.println(e.getMessage()); System.exit(1); } return ""; } }
-
Untuk API detailnya, lihat CreateTabledi AWS SDK for Java 2.x APIReferensi.
-
- JavaScript
-
- SDKuntuk JavaScript (v3)
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. import { CreateTableCommand, DynamoDBClient } from "@aws-sdk/client-dynamodb"; const client = new DynamoDBClient({}); export const main = async () => { const command = new CreateTableCommand({ TableName: "EspressoDrinks", // For more information about data types, // see https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.NamingRulesDataTypes.html#HowItWorks.DataTypes and // https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.LowLevelAPI.html#Programming.LowLevelAPI.DataTypeDescriptors AttributeDefinitions: [ { AttributeName: "DrinkName", AttributeType: "S", }, ], KeySchema: [ { AttributeName: "DrinkName", KeyType: "HASH", }, ], ProvisionedThroughput: { ReadCapacityUnits: 1, WriteCapacityUnits: 1, }, }); const response = await client.send(command); console.log(response); return response; };
-
Untuk informasi selengkapnya, silakan lihat Panduan Developer AWS SDK for JavaScript.
-
Untuk API detailnya, lihat CreateTabledi AWS SDK for JavaScript APIReferensi.
-
- SDKuntuk JavaScript (v2)
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. // Load the AWS SDK for Node.js var AWS = require("aws-sdk"); // Set the region AWS.config.update({ region: "REGION" }); // Create the DynamoDB service object var ddb = new AWS.DynamoDB({ apiVersion: "2012-08-10" }); var params = { AttributeDefinitions: [ { AttributeName: "CUSTOMER_ID", AttributeType: "N", }, { AttributeName: "CUSTOMER_NAME", AttributeType: "S", }, ], KeySchema: [ { AttributeName: "CUSTOMER_ID", KeyType: "HASH", }, { AttributeName: "CUSTOMER_NAME", KeyType: "RANGE", }, ], ProvisionedThroughput: { ReadCapacityUnits: 1, WriteCapacityUnits: 1, }, TableName: "CUSTOMER_LIST", StreamSpecification: { StreamEnabled: false, }, }; // Call DynamoDB to create the table ddb.createTable(params, function (err, data) { if (err) { console.log("Error", err); } else { console.log("Table Created", data); } });
-
Untuk informasi selengkapnya, silakan lihat Panduan Developer AWS SDK for JavaScript.
-
Untuk API detailnya, lihat CreateTabledi AWS SDK for JavaScript APIReferensi.
-
- Kotlin
-
- SDKuntuk Kotlin
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. suspend fun createNewTable( tableNameVal: String, key: String, ): String? { val attDef = AttributeDefinition { attributeName = key attributeType = ScalarAttributeType.S } val keySchemaVal = KeySchemaElement { attributeName = key keyType = KeyType.Hash } val provisionedVal = ProvisionedThroughput { readCapacityUnits = 10 writeCapacityUnits = 10 } val request = CreateTableRequest { attributeDefinitions = listOf(attDef) keySchema = listOf(keySchemaVal) provisionedThroughput = provisionedVal tableName = tableNameVal } DynamoDbClient { region = "us-east-1" }.use { ddb -> var tableArn: String val response = ddb.createTable(request) ddb.waitUntilTableExists { // suspend call tableName = tableNameVal } tableArn = response.tableDescription!!.tableArn.toString() println("Table $tableArn is ready") return tableArn } }
-
Untuk API detailnya, lihat CreateTable AWS
SDKAPIreferensi Kotlin.
-
- PHP
-
- SDKuntuk PHP
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. Buat tabel.
$tableName = "ddb_demo_table_$uuid"; $service->createTable( $tableName, [ new DynamoDBAttribute('year', 'N', 'HASH'), new DynamoDBAttribute('title', 'S', 'RANGE') ] ); public function createTable(string $tableName, array $attributes) { $keySchema = []; $attributeDefinitions = []; foreach ($attributes as $attribute) { if (is_a($attribute, DynamoDBAttribute::class)) { $keySchema[] = ['AttributeName' => $attribute->AttributeName, 'KeyType' => $attribute->KeyType]; $attributeDefinitions[] = ['AttributeName' => $attribute->AttributeName, 'AttributeType' => $attribute->AttributeType]; } } $this->dynamoDbClient->createTable([ 'TableName' => $tableName, 'KeySchema' => $keySchema, 'AttributeDefinitions' => $attributeDefinitions, 'ProvisionedThroughput' => ['ReadCapacityUnits' => 10, 'WriteCapacityUnits' => 10], ]); }
-
Untuk API detailnya, lihat CreateTabledi AWS SDK for PHP APIReferensi.
-
- PowerShell
-
- Alat untuk PowerShell
-
Contoh 1: Contoh ini membuat tabel bernama Thread yang memiliki kunci utama yang terdiri dari 'ForumName' (hash tipe kunci) dan 'Subject' (rentang tipe kunci). Skema yang digunakan untuk membangun tabel dapat disalurkan ke setiap cmdlet seperti yang ditunjukkan atau ditentukan menggunakan parameter -Schema.
$schema = New-DDBTableSchema $schema | Add-DDBKeySchema -KeyName "ForumName" -KeyDataType "S" $schema | Add-DDBKeySchema -KeyName "Subject" -KeyType RANGE -KeyDataType "S" $schema | New-DDBTable -TableName "Thread" -ReadCapacity 10 -WriteCapacity 5
Output:
AttributeDefinitions : {ForumName, Subject} TableName : Thread KeySchema : {ForumName, Subject} TableStatus : CREATING CreationDateTime : 10/28/2013 4:39:49 PM ProvisionedThroughput : Amazon.DynamoDBv2.Model.ProvisionedThroughputDescription TableSizeBytes : 0 ItemCount : 0 LocalSecondaryIndexes : {}
Contoh 2: Contoh ini membuat tabel bernama Thread yang memiliki kunci utama yang terdiri dari 'ForumName' (hash tipe kunci) dan 'Subject' (rentang tipe kunci). Indeks sekunder lokal juga didefinisikan. Kunci indeks sekunder lokal akan diatur secara otomatis dari kunci hash utama pada tabel (ForumName). Skema yang digunakan untuk membangun tabel dapat disalurkan ke setiap cmdlet seperti yang ditunjukkan atau ditentukan menggunakan parameter -Schema.
$schema = New-DDBTableSchema $schema | Add-DDBKeySchema -KeyName "ForumName" -KeyDataType "S" $schema | Add-DDBKeySchema -KeyName "Subject" -KeyDataType "S" $schema | Add-DDBIndexSchema -IndexName "LastPostIndex" -RangeKeyName "LastPostDateTime" -RangeKeyDataType "S" -ProjectionType "keys_only" $schema | New-DDBTable -TableName "Thread" -ReadCapacity 10 -WriteCapacity 5
Output:
AttributeDefinitions : {ForumName, LastPostDateTime, Subject} TableName : Thread KeySchema : {ForumName, Subject} TableStatus : CREATING CreationDateTime : 10/28/2013 4:39:49 PM ProvisionedThroughput : Amazon.DynamoDBv2.Model.ProvisionedThroughputDescription TableSizeBytes : 0 ItemCount : 0 LocalSecondaryIndexes : {LastPostIndex}
Contoh 3: Contoh ini menunjukkan cara menggunakan pipeline tunggal untuk membuat tabel bernama Thread yang memiliki kunci utama yang terdiri dari 'ForumName' (hash tipe kunci) dan 'Subjek' (rentang tipe kunci) dan indeks sekunder lokal. Add- DDBKeySchema dan Add- DDBIndexSchema membuat TableSchema objek baru untuk Anda jika salah satu tidak dipasok dari pipeline atau parameter -Schema.
New-DDBTableSchema | Add-DDBKeySchema -KeyName "ForumName" -KeyDataType "S" | Add-DDBKeySchema -KeyName "Subject" -KeyDataType "S" | Add-DDBIndexSchema -IndexName "LastPostIndex" ` -RangeKeyName "LastPostDateTime" ` -RangeKeyDataType "S" ` -ProjectionType "keys_only" | New-DDBTable -TableName "Thread" -ReadCapacity 10 -WriteCapacity 5
Output:
AttributeDefinitions : {ForumName, LastPostDateTime, Subject} TableName : Thread KeySchema : {ForumName, Subject} TableStatus : CREATING CreationDateTime : 10/28/2013 4:39:49 PM ProvisionedThroughput : Amazon.DynamoDBv2.Model.ProvisionedThroughputDescription TableSizeBytes : 0 ItemCount : 0 LocalSecondaryIndexes : {LastPostIndex}
-
Untuk API detailnya, lihat CreateTabledi AWS Tools for PowerShell Referensi Cmdlet.
-
- Python
-
- SDKuntuk Python (Boto3)
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. Buat tabel untuk menyimpan data film.
class Movies: """Encapsulates an Amazon DynamoDB table of movie data. Example data structure for a movie record in this table: { "year": 1999, "title": "For Love of the Game", "info": { "directors": ["Sam Raimi"], "release_date": "1999-09-15T00:00:00Z", "rating": 6.3, "plot": "A washed up pitcher flashes through his career.", "rank": 4987, "running_time_secs": 8220, "actors": [ "Kevin Costner", "Kelly Preston", "John C. Reilly" ] } } """ def __init__(self, dyn_resource): """ :param dyn_resource: A Boto3 DynamoDB resource. """ self.dyn_resource = dyn_resource # The table variable is set during the scenario in the call to # 'exists' if the table exists. Otherwise, it is set by 'create_table'. self.table = None def create_table(self, table_name): """ Creates an Amazon DynamoDB table that can be used to store movie data. The table uses the release year of the movie as the partition key and the title as the sort key. :param table_name: The name of the table to create. :return: The newly created table. """ try: self.table = self.dyn_resource.create_table( TableName=table_name, KeySchema=[ {"AttributeName": "year", "KeyType": "HASH"}, # Partition key {"AttributeName": "title", "KeyType": "RANGE"}, # Sort key ], AttributeDefinitions=[ {"AttributeName": "year", "AttributeType": "N"}, {"AttributeName": "title", "AttributeType": "S"}, ], ProvisionedThroughput={ "ReadCapacityUnits": 10, "WriteCapacityUnits": 10, }, ) self.table.wait_until_exists() except ClientError as err: logger.error( "Couldn't create table %s. Here's why: %s: %s", table_name, err.response["Error"]["Code"], err.response["Error"]["Message"], ) raise else: return self.table
-
Untuk API detailnya, lihat CreateTable AWSSDKReferensi Python (Boto3). API
-
- Ruby
-
- SDKuntuk Ruby
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. # Encapsulates an Amazon DynamoDB table of movie data. class Scaffold attr_reader :dynamo_resource, :table_name, :table def initialize(table_name) client = Aws::DynamoDB::Client.new(region: 'us-east-1') @dynamo_resource = Aws::DynamoDB::Resource.new(client: client) @table_name = table_name @table = nil @logger = Logger.new($stdout) @logger.level = Logger::DEBUG end # Creates an Amazon DynamoDB table that can be used to store movie data. # The table uses the release year of the movie as the partition key and the # title as the sort key. # # @param table_name [String] The name of the table to create. # @return [Aws::DynamoDB::Table] The newly created table. def create_table(table_name) @table = @dynamo_resource.create_table( table_name: table_name, key_schema: [ { attribute_name: 'year', key_type: 'HASH' }, # Partition key { attribute_name: 'title', key_type: 'RANGE' } # Sort key ], attribute_definitions: [ { attribute_name: 'year', attribute_type: 'N' }, { attribute_name: 'title', attribute_type: 'S' } ], provisioned_throughput: { read_capacity_units: 10, write_capacity_units: 10 } ) @dynamo_resource.client.wait_until(:table_exists, table_name: table_name) @table rescue Aws::DynamoDB::Errors::ServiceError => e @logger.error("Failed create table #{table_name}:\n#{e.code}: #{e.message}") raise end
-
Untuk API detailnya, lihat CreateTabledi AWS SDK for Ruby APIReferensi.
-
- Rust
-
- SDKuntuk Rust
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. pub async fn create_table( client: &Client, table: &str, key: &str, ) -> Result<CreateTableOutput, Error> { let a_name: String = key.into(); let table_name: String = table.into(); let ad = AttributeDefinition::builder() .attribute_name(&a_name) .attribute_type(ScalarAttributeType::S) .build() .map_err(Error::BuildError)?; let ks = KeySchemaElement::builder() .attribute_name(&a_name) .key_type(KeyType::Hash) .build() .map_err(Error::BuildError)?; let pt = ProvisionedThroughput::builder() .read_capacity_units(10) .write_capacity_units(5) .build() .map_err(Error::BuildError)?; let create_table_response = client .create_table() .table_name(table_name) .key_schema(ks) .attribute_definitions(ad) .provisioned_throughput(pt) .send() .await; match create_table_response { Ok(out) => { println!("Added table {} with key {}", table, key); Ok(out) } Err(e) => { eprintln!("Got an error creating table:"); eprintln!("{}", e); Err(Error::unhandled(e)) } } }
-
Untuk API detailnya, lihat CreateTable AWS
SDKuntuk API referensi Rust.
-
- SAP ABAP
-
- SDKuntuk SAP ABAP
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. TRY. DATA(lt_keyschema) = VALUE /aws1/cl_dynkeyschemaelement=>tt_keyschema( ( NEW /aws1/cl_dynkeyschemaelement( iv_attributename = 'year' iv_keytype = 'HASH' ) ) ( NEW /aws1/cl_dynkeyschemaelement( iv_attributename = 'title' iv_keytype = 'RANGE' ) ) ). DATA(lt_attributedefinitions) = VALUE /aws1/cl_dynattributedefn=>tt_attributedefinitions( ( NEW /aws1/cl_dynattributedefn( iv_attributename = 'year' iv_attributetype = 'N' ) ) ( NEW /aws1/cl_dynattributedefn( iv_attributename = 'title' iv_attributetype = 'S' ) ) ). " Adjust read/write capacities as desired. DATA(lo_dynprovthroughput) = NEW /aws1/cl_dynprovthroughput( iv_readcapacityunits = 5 iv_writecapacityunits = 5 ). oo_result = lo_dyn->createtable( it_keyschema = lt_keyschema iv_tablename = iv_table_name it_attributedefinitions = lt_attributedefinitions io_provisionedthroughput = lo_dynprovthroughput ). " Table creation can take some time. Wait till table exists before returning. lo_dyn->get_waiter( )->tableexists( iv_max_wait_time = 200 iv_tablename = iv_table_name ). MESSAGE 'DynamoDB Table' && iv_table_name && 'created.' TYPE 'I'. " This exception can happen if the table already exists. CATCH /aws1/cx_dynresourceinuseex INTO DATA(lo_resourceinuseex). DATA(lv_error) = |"{ lo_resourceinuseex->av_err_code }" - { lo_resourceinuseex->av_err_msg }|. MESSAGE lv_error TYPE 'E'. ENDTRY.
-
Untuk API detailnya, lihat CreateTable AWSSDKuntuk SAP ABAP API referensi.
-
- Swift
-
- SDKuntuk Swift
-
catatan
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara pengaturan dan menjalankannya di Repositori Contoh Kode AWS
. import AWSDynamoDB /// /// Create a movie table in the Amazon DynamoDB data store. /// private func createTable() async throws { do { guard let client = self.ddbClient else { throw MoviesError.UninitializedClient } let input = CreateTableInput( attributeDefinitions: [ DynamoDBClientTypes.AttributeDefinition(attributeName: "year", attributeType: .n), DynamoDBClientTypes.AttributeDefinition(attributeName: "title", attributeType: .s) ], keySchema: [ DynamoDBClientTypes.KeySchemaElement(attributeName: "year", keyType: .hash), DynamoDBClientTypes.KeySchemaElement(attributeName: "title", keyType: .range) ], provisionedThroughput: DynamoDBClientTypes.ProvisionedThroughput( readCapacityUnits: 10, writeCapacityUnits: 10 ), tableName: self.tableName ) let output = try await client.createTable(input: input) if output.tableDescription == nil { throw MoviesError.TableNotFound } } catch { print("ERROR: createTable:", dump(error)) throw error } }
-
Untuk API detailnya, lihat CreateTable AWS
SDKAPIreferensi Swift.
-
Untuk contoh DynamoDB lainnya, lihat Contoh kode untuk DynamoDB menggunakan AWS SDKs.
Setelah membuat tabel baru, lanjutkan ke Langkah 2: Menulis data ke tabel DynamoDB.