Fields for the output destination - MediaLive

Fields for the output destination

The following fields configure the destination of the output:

  • Output group – UDP destination sections

  • Output – Output settings – Network settings – Buffer msec

To specify the destination for the output

  1. When you discussed your requirements with the operator who manages the downstream system that will receive UDP content, you should have obtained the following information:

    • The URLs

    • The port numbers

    For example:

    udp://203.0.113.28:5000

    udp://203.0.113.33:5005

  2. Enter the URLs, including the port number, in one or both of the URL fields in the UDP destinations section.

  3. If you enable FEC, leave space between the port numbers for the two destinations.

    For example, if one destination is rtp://203.0.113.28:5000, assume that FEC also uses port 5002 and 5004. So the lowest possible port number for the other destination is 5005: rtp://203.0.113.33:5005.

  4. (Optional) In the Output section, complete the Buffer msec field as appropriate. For details, choose the Info link next to the field in the MediaLive console.